Add to BibSonomy
Abstract
Optical frequency comb (OFC) technology can realize the rapid measurement of electric fields (E-fields) with large bandwidth. However, this technology suffers from the problem of high intensity noise, resulting in low sensitivity and a blind frequency region. In order to solve the above problems, a dual-path optical E-field sensor with a common reference arm based on a lithium niobate optical waveguide is proposed. The introduction of the reference arm improves the balance of optical paths and the degree of integration. A segmented electrode is also designed to ensure the generation of reverse electrical signals on two Mach–Zehnder interferometers (MZIs). After exiting from the differential photodetector (PD), the intensity noise can be removed, and the sensitivity of the sensor can be improved. After testing, the maximum intensity noise reduction is about 37 dB, the average noise reduction is about 22.3 dB, and the blind frequency region can be eliminated with the co-arm differential optical E-field (CDOE) sensor in the process of measuring the signal. This sensor can be used in the 1 MHz–12 GHz bandwidth with a sensitivity better than 10 mV/m·√Hz.
© 2024 Optica Publishing Group
Full Article | PDF ArticleMore Like This
Xiyi Weng, Wei Wei, Weilin Xie, and Yi Dong
Opt. Lett. 49(5) 1113-1116 (2024)
Haochen Tian, Ruichen Zhu, Runmin Li, Sida Xing, Thomas R. Schibli, and Kaoru Minoshima
Opt. Lett. 49(3) 538-541 (2024)
Chen Lin, Siyu Zhou, Liheng Shi, Yuetang Yang, and Guanhao Wu
Opt. Lett. 49(3) 526-529 (2024)