We report on a straightforward way to increase the photoluminescence enhancement of nanoemitters induced by optical nanotantennas. The nanoantennas are placed above a gold film-silica bilayer, which produces a drastic increase of the scattered radiation power and near field enhancement. We demonstrate this increase via photoluminescence enhancement using an organic emitter of low quantum efficiency, Tetraphenylporphyrin (TPP). An increase of the photoluminescence enhancement by a factor larger than three is observed compared to antennas without the reflecting-layer. In addition, we study the possibility of influencing the polarization of the light emitted by utilizing asymmetry of dimer antennas.
© 2013 OSA
Optical antennas [1–3], similar to their radio frequency counterparts, capture free-space electromagnetic radiation and focus it to a small region beyond the diffraction limit. Optical antenna systems consisting of single or coupled nanoparticles have been studied extensively over the last years[4–19]. It is well established that two closely spaced nanoparticles show greater field enhancement than single particles, due to the coupling of their localised surface plasmon resonances (LSPRs) [14–16]. The strong field enhancements provided by LSPRs can be used to enhance optical spectroscopies such as SERS [20, 21] and multiphoton absorption  or modify the spectral characteristics of nanoscale emitters (dyes, quantum dots...) in the vicinity of the nanoparticles . In the case of nanoemitters, fluorescence enhancement can be obtained via three phenomena. On the one hand, an increase of the emitter’s radiative decay rate can be induced by the interaction between the emitter and nanoparticles resonant with the emission spectral profile . On the other hand the nanoantenna can improve the transduction of the excitation light field from near field to far field [6, 7, 9, 10, 11, 25, 24]. Finally, nanoantennas can exert directional control on the fluorescence emission, allowing for a higher portion of the light to be emitted within the finite aperture of the collection optics [26, 27].
To maximize the field enhancement, a careful optimization of the optical antennas’ characteristics needs to be explored [28–30]. It has been demonstrated that the field enhancement can be increased by changing the antenna dimensions, shrinking the size of the antenna feed gap, or using arrays of nanoantennas to improve the near-field coupling [2, 31, 32]. Recently studies have pointed out a very effective alternative to increase the field enhancement and the scattering cross section of metal nanoantennas via placing them on a continuous thin dielectric film on a metal underlayer. Specifically it was demonstrated that Metal-Insulator-Metal(MIM) structures working as resonators can be used to maximize the absorption in the visible regime when they are combined with nanoantennas arrays [33, 34]. The addition of a reflecting underlayer provides alternative ways of tuning optical antennas by changing the dielectric layer thickness as well as increasing the near-field enhancement, achieving high quality factors [35, 36]. This phenomenon can be explained by a near-field coupling between the antenna and its mirror image on the metal layer  and has been used to improve SERS  or the directivity on optical antenna substrates , allowing for single molecular detection . Also, Gong et al.  show an enhancement in the emission intensity of Erbium-doped SiN placed in Metal-Insulator-Metal plasmonic cavities. However, none of these articles have investigated the possibility to use this concept to improve the radiation properties of single nanoantennas in terms of enhancement of the fluorescence of organic nanoemitters.
In this article, we investigate both theoretically and experimentally a plasmonic resonant system consisting of gold dimer nanoantennas separated by a thin dielectric layer of SiO2 from a gold metal underlayer. The nanoemitter chosen for our study is meso-Tetraphenylporphyrin (TPP), an organic dye which presents two well-separated emission peaks at 650 and 750 nm, as shown in Fig. 1(c) . We demonstrate that the addition of the metal layer in the nanoantenna fabrication leads to an increased scattering cross section and field enhancement. This is accompanied by an increase of photoluminescence enhancement. The asymmetry of the dimer leads to two LSPRs in different wavelength ranges along the two perpendicular polarisations. Those two spectrally separated LSPRs enhance selectively the emission bands of TPP depending on the polarisation.
Our study uses glass substrates covered by a 100 nm thick gold layer, further capped by a continuous 25 nm SiO2 film (nd = 1.45). The nanoantennas were nanofabricated on top of the SiO2 film, and are 40 nm-thick gold dimers composed of two opposing long arms separated by a 30 nm gap, as illustrated in Fig. 1(b). The structures were fabricated by electron beam lithography (Elonix 100KV EBL system) with the process described in . The antennas were fabricated in arrays at a separation of 4μm allowing to measure the optical response of a single antenna. The emitting layer is produced by spin-coating a film of TPP-doped PMMA film on the sample, at a thickness of approximately 40 nm. The weight concentration ratio PMMA/TPP is chosen to be 75 in order to maximize the TPP film fluorescence. Since TPP possesses a low quantum yield (<20%) , it is an ideal candidate for photoluminescence enhancement using plasmonic nanostructures .
Figure 1(a) presents a schematic diagram of the experimental setup. The excitation laser is set at a wavelength of 405 nm to match the absorption band of TPP [Fig. 1(c)]. A 40×, NA=0.6 microscope objective is used to focus the laser beam on the sample and collect the emitted light from the sample. The fluorescent light is filtered in order to cut off the incident light scattered from the sample. The fluorescent light can be sent to a spectrometer or to a polarizing beam splitter that splits the two polarization components, which are collected independently on two APDs (avalanche photodiode) detectors. The scattering cross sections of the nanoantennas were measured on individual nanoantennas using dark-field spectroscopy with a polarization-adjustable white-light illumination at an incident angle θ = 60° with respect to the normal of the sample surface, as described elsewhere . Numerical simulations were performed to evaluate the scattering cross sections of the antennas as well as their near-field enhancement and the radiated power of an emitter in the presence of the antennas. The simulations were performed using the commercial 3D full-wave electromagnetic wave solver Lumerical FDTD Solutions, at similar conditions to the measurements using the experimental sample geometries. The optical constants were obtained by fitting the values found in  to a multi-coefficient model.
3. Results and discussion
We firstly describe and characterize the antenna system used in our study. The nanoantenna system is not yet covered with the dye-doped layer, and we choose a nanoantenna composed of two opposing 75 nm long arms (elongated disks) with a 30 nm gap. Figure 2(a) shows a simulation of the near-field enhancement as a function of the excitation wavelength by spatially integrating the field intensity at every point in the surrounding antenna volume with and without the reflecting layer. Since the confocal setup probes a zone limited by diffraction, we choose to integrate the near-field intensity in a volume comparable to the probing area of excitation (300 nm × 200 nm × 100 nm). This allows us to estimate the average near-field enhancement on the TPP molecules, which are randomly spatially distributed and oriented.
The simulation was carried out considering a broadband plane wave as illumination source and a SiO2 separation of 25 nm. This comparison shows a field enhancement factor being amplified up to 5 times when the gold underlayer is used in these antennas. In addition, the resonance of the nanoantenna shifts to lower energies when the SiO2 separation decreases, because of the near-field interaction between the antennas and the gold underlayer. This is explained by the hybridisation of the antenna dipole with its dipole image in the Au film leading to a red shift when the interaction is stronger . Moreover in Fig. 2(a) we present the average enhancement corresponding to nanoantenna without gold reflecting layer (dotted line), with the dimensions such that the resonance position matches the position of the antenna with the reflective layer (long arm of 95 nm instead of 75 nm). This allows us to estimate the maximum amplification enhancement that the mirror layer introduces at a certain wavelength. In this case (resonance at 655 nm) the factor is approximately 3. To link this to the enhancement of the emission of a dye placed next to a nanoantenna, the inset of Fig. 2(a) presents the enhancement of the radiated power of a dipole ideally coupled to the gold nanoantenna, i.e. positioned at the center of the gap and oriented along the main axis of the dimer, influenced by the addition of the Au underlayer on the antenna substrate. Here the nanoantennas are placed on top of a SiO2 layer at different thickness. The enhancement of the power radiated by the dipole increases gradually as the SiO2 separation layer gets smaller, achieving amplification factors of more than 100 times compared to the case without the gold underlayer. This comparison illustrates the benefits of the underlayer on the radiation properties of dyes, albeit in the ideal situation where the emitter is perfectly placed and oriented along the gap. This picture is challenging to reproduce experimentally in our samples, TPP molecules are distributed randomly around the nanoantenna and with random orientation. In addition, the red-shift of the wavelength, previously discussed, allows us to select 25 nm as the SiO2 layer thickness for our samples to optimize the overlap between the near field antenna resonance and the first emission peak of TPP at 640–680 nm. It is important to mention that the predicted near field antenna resonance under plane wave illumination matches the predicted antenna radiation resonance under the dipole excitation.
Figure 2(b) shows a comparison of the simulated scattering cross section (solid lines) and the dark field scattering of the antennas (dotted lines) placed on a glass substrate with (black) and without (red) gold underlayer. For these and all subsequent simulations, the PMMA layer is not taken into account because the measurement of the scattering cross sections of the antennas after deposition of the PMMA/TPP layer only exhibited a minor shift of the resonances (≈10 nm). Spectra are normalised relatively to the intensity of the resonance parallel to the dimmer axis for the case of using a gold underlayer. Far field projections (not shown) of the light emitted by a dipole in the situation described in Figure (2)a show that the underlayer does not change the radiation profile: the photoluminescence enhancement seen is not due to a beaming effect. For this reason, it is not necessary to take into account the finite NA of the microscope objectives used in the simulations. Hence we always estimate the scattering cross sections of the nanoantennas by integrating over the full 4π space. We observe a good agreement between experiment and simulation, both demonstrating that using a gold underlayer the scattering of the antenna increases by a factor up to 4 in the current configuration.
We then evaluate the effect of the gold underlayer on the photoluminescence (PL) enhancement of the TPP emitters placed on the antenna vicinity. Figure 3(a) shows the spectral overlap between the emission band of TPP and the simulated near-field resonances for the polarization along the main axis of the dimer with and without the gold underlayer. In both cases, the near-field resonances predominantly match the first emission peak at 640–680 nm. We thus filter the PL in this wavelength range to maximize the intensity contrast Fig. 3(b). The fluorescence comparison shows that antennas without the Au under layer induces a 10% PL enhancement while the antennas with the gold underlayer reach up to 50%, as highlighted on the profiles on Fig. 3(b–d). This result is in good agreement with the values predicted by the simulations as discussed previously. The ratio of the enhancements is slightly higher than what is expected from the near field integrations discussed in Fig. 2(a), probably because the overlap between the resonance of the nanoantenna and the emission peak of TPP is stronger in the case with the reflective gold layer. Note while, the total maximum enhancement seen is modest, this is due to the fact that the radiation collected is integrated over the whole confocal volume, which contains many dyes, randomly positioned and oriented - only the ones in the centre of the gap experience for optimum enhancement.
It has been reported that the fluorescence enhancement can be written as the product of two factors related to different properties of LSPRs . On the one hand, the near-field enhancement (where Eo is the free-space electric field that illuminates the nanoantenna) is related to the capability of plasmons to concentrate electromagnetic energy into sub-wavelength volumes and it is evaluated at the excitation frequency, effectively increasing the absorption cross section of the nanoemitter. The other factor is the quantum yield enhancement ,which is related to the modification of the photonic density of states at the emitter position induced by the localized resonance and it is determined by the emission frequency. These two factors can be simultaneously much larger than unity, which leads to strong enhancements of the fluorescence intensity . Considering that the emission and absorption of TPP are spectrally well separated [Fig. 1(c)], and the excitation wavelength at 405 nm does not excite plasmon resonance in our antennas, the observed PL increase should be mainly due to the direct emission enhancement
Furthermore, we study the effect of polarization for the case of a dimmer antenna with the reflecting underlayer. Figure 4 shows the two resonances sustained by a gold dimer for both parallel and perpendicular polarizations with respect to the dimmer axis. For this study, the dimer antennas used were chosen with a larger length in order to have the main resonance along the X axis matching the low energy emission peak of TPP at 700–740 nm. The resonance along the X axis is much more intense than the Y-axis resonance due to the strong coupling between the particles as reflected also in the near-field profile [Fig. 4(c)]. Dark field measurement and scattering simulation in Fig. 4(a) clearly show the difference in intensities and the spectral separation between both resonances.
Figure 5(a) compares the emission band of TPP and the simulated near-field resonances for an excitation along the main axis of the dimer (X-polarised) and perpendicular to it (Y-polarised). There is a good overlap between the low energy peak at 700–740 nm and the X-resonance and a partial overlap of the Y-resonance with the high energy peak at 640–680 nm. In addition, a small contribution from the X-resonance tail overlaps with the high energy peak. The spectrum of PL of the TPP is acquired without specific filtering, on the antennas and away from them. The results, as shown in Fig. 5(b), show a PL enhancement in all the emission ranges, which is more pronounced at the low energy emission peak, with a 25% increase in the peak intensity. This is in agreement with the overlap presented in Fig. 5(a). The enhancement is 5% for the high energy peak, attributed to the smaller contribution from both resonances in this spectral region at 640–680 nm. Figure 5(c) illustrates the PL enhancement difference for both peaks by imaging three identical nanoantennas, either selecting only the first peak (top) or only the second (bottom).
We finish our discussion by analysing the effect of both resonances independently and experimentally test the overlap discussed in Fig. 5(a). To do so, we collect independently the two polarization components of the PL emitted, as described in Fig. 1. Figure 6(a) shows the PL enhancement in the X polarization. In this case, the low energy peak is enhanced up to 80% whereas the high energy peak is enhanced up to 20%. The ratio between the two enhancements is in a reasonable agreement with the predicted overlap between the near field resonance in the X-axis resonance and the two TPP emission peaks. Similarly, Fig. 6(b) shows that for the polarization perpendicular to the antenna axis, the TPP emission peak around 640–680 nm is more enhanced than the low energy peak, which is again consistent with the magnitude of the field enhancement provided by the nanoantenna for this polarisation. These observations support that doubly resonant systems, like gold dimers, can be used to selectively influence the polarization of emitted light in a specific wavelength range.
We have demonstrated that the addition of a gold underlayer to the fabrication of nanoantennas can improves their properties, by offering new possibilities of resonance tuning by means of controlling the spacer thickness and increasing their scattered radiation power and near-field enhancement. These in turn increase the photoluminescence enhancement induced by the antenna on a low efficiency light emitter such as TPP. In addition, this improvement enhances the intensity of the two resonances associated with the perpendicular light polarizations existing in a gold dimer, allowing to measure their influence in a specific wavelength of the dye emission. Such a system presents a way to selectively influence the polarization of emitted light in organic dyes with multiple emission peaks.
This work is supported in part by the UK Engineering and Physical Sciences Research Council (EPSRC) and Nano-Sci Era Nanospec. Y.S. acknowledges funding from the Leverhulme Trust(U.K). M.R acknowledges Data Storage Institute of Singapore, (A*STAR) Agency for Science Technology and Research.
References and links
1. K. B. Crozier, A. Sundaramurthy, G. S. Kino, and C. F. Quate, “Optical antennas: Resonators for local field enhancement,” J. Appl. Phys. 94, 4632 (2003) [CrossRef] .
2. P. J. Schuck, D. P. Fromm, A. Sundaramurthy, G. S. Kino, and W. E. Moerner, “Improving the mismatch between light and nanoscale objects with gold bowtie nanoantennas,” Phys. Rev. Lett. 94, 14–17 (2005) [CrossRef] .
3. J. A. Schuller, T. Taubner, and M. L. Brongersma, “Optical antenna thermal emitters,” Nat. Photonics 3, 658–661 (2009) [CrossRef] .
4. S. Kühn, U. Håkanson, L. Rogobete, and V. Sandoghdar, “Enhancement of single-molecule fluorescence using a gold nanoparticle as an optical nanoantenna,” Phys. Rev. Lett. 97, 1–4 (2006) [CrossRef] .
5. H. Ditlbacher, J. R. Krenn, N. Felidj, B. Lamprecht, G. Schider, M. Salerno, A. Leitner, and F. R. Aussenegg, “Fluorescence imaging of surface plasmon fields,” Appl. Phys. Lett. 80, 404 (2002) [CrossRef] .
6. J.-H. Song, T. Atay, S. Shi, H. Urabe, and A. V. Nurmikko, “Large enhancement of fluorescence efficiency from CdSe/ZnS quantum dots induced by resonant coupling to spatially controlled surface plasmons,” Nano Lett. 5, 1557–1561 (2005) [CrossRef] [PubMed] .
7. J. N. Farahani, D. W. Pohl, H.-J. Eisler, and B. Hecht, “Single Quantum dot coupled to a scanning optical antenna: A tunable superemitter,” Phys. Rev. Lett. 95, 1–4 (2005) [CrossRef] .
8. M. Rahmani, T. Tahmasebi, Y. Lin, B. Lukiyanchuk, T. Y. F. Liew, and M. H. Hong, “Influence of plasmon destructive interferences on optical properties of gold planar quadrumers,” Nanotechnology 22, 245204 (2011) [CrossRef] [PubMed] .
10. J. S. Biteen, N. S. Lewis, H. A. Atwater, H. Mertens, and A. Polman, “Spectral tuning of plasmon-enhanced silicon quantum dot luminescence,” Appl. Phys. Lett. 88, 131109 (2006) [CrossRef] .
11. H. Mertens and A. Polman, “Plasmon-enhanced erbium luminescence,” Appl Phys. Lett. 89, 211107 (2006) [CrossRef] .
12. W. Rechberger, A. Hohenau, A. Leitner, J. Krenn, B. Lamprecht, and F. Aussenegg, “Optical properties of two interacting gold nanoparticles,” Opt. Commun. 220, 137–141 (2003) [CrossRef] .
13. K.-H. Su, Q.-H. Wei, X. Zhang, J. J. Mock, D. R. Smith, and S. Schultz, “Interparticle Coupling effects on plasmon resonances of nanogold Particles,” Nano Lett. 3, 1087–1090 (2003) [CrossRef] .
14. A. Sundaramurthy, K. Crozier, G. Kino, D. Fromm, P. Schuck, and W. Moerner, “Field enhancement and gap-dependent resonance in a system of two opposing tip-to-tip Au nanotriangles,” Phys. Rev. B 72, 165409 (2005) [CrossRef] .
16. E. Cubukcu, E. a. Kort, K. B. Crozier, and F. Capasso, “Plasmonic laser antenna,” Appl. Phys. Lett. 89, 093120 (2006) [CrossRef] .
19. R. M. Bakker, A. Boltasseva, Z. Liu, R. H. Pedersen, S. Gresillon, A. V. Kildishev, V. P. Drachev, and V. M. Shalaev, “Near-field excitation of nanoantenna resonance,” Opt. Express 15, 13682–13688 (2007) [CrossRef] [PubMed] .
21. K. Kneipp, Y. Wang, H. Kneipp, L. Perelman, I. Itzkan, R. Dasari, and M. Feld, “Single Molecule Detection Using Surface-Enhanced Raman Scattering (SERS),” Phys. Rev. Lett. 78, 1667–1670 (1997) [CrossRef] .
22. G. Volpe, M. Noack, S. S. Aćimović, C. Reinhardt, and R. Quidant, “Near-field mapping of plasmonic antennas by multiphoton absorption in poly(methyl methacrylate),” Nano Lett. 12, 4864–4868 (2012) [CrossRef] [PubMed] .
23. V. Giannini, A. I. Fernández-Domínguez, Y. Sonnefraud, T. Roschuk, R. Fernández-García, and S. A. Maier, “Controlling light localization and light-matter interactions with nanoplasmonics,” Small 6, 2498–2507 (2010) [CrossRef] [PubMed] .
24. O. L. Muskens, V. Giannini, J. A. Snchez-Gil, and J. Gmez Rivas, “Strong enhancement of the radiative decay rate of emitters by single plasmonic nanoantennas,” Nano Lett. 7, 2871–2875 (2007) [CrossRef] [PubMed] .
25. S. Gerber, F. Reil, U. Hohenester, T. Schlagenhaufen, J. Krenn, and A. Leitner, “Tailoring light emission properties of fluorophores by coupling to resonance-tuned metallic nanostructures,” Phys. Rev. B 75, 073404 (2007) [CrossRef] .
26. H. Aouani, O. Mahboub, N. Bonod, E. Devaux, E. Popov, H. Rigneault, T. W. Ebbesen, and J. Wenger, “Bright unidirectional fluorescence emission of molecules in a nanoaperture with plasmonic corrugations,” Nano Lett. 11, 637–644 (2011) [CrossRef] [PubMed] .
27. A. G. Curto, G. Volpe, T. H. Taminiau, M. P. Kreuzer, R. Quidant, and N. F. van Hulst, “Unidirectional emission of a quantum dot coupled to a nanoantenna,” Science 329, 930–933 (2010) [CrossRef] [PubMed] .
28. A. Alù and N. Engheta, “Tuning the scattering response of optical nanoantennas with nanocircuit loads,” Nat. Photonics 2, 307–310 (2008) [CrossRef] .
29. J. Merlein, M. Kahl, A. Zuschlag, A. Sell, A. Halm, J. Boneberg, P. Leiderer, A. Leitenstorfer, and R. Bratschitsch, “Nanomechanical control of an optical antenna,” Nat. Photonics 2, 230–233 (2008) [CrossRef] .
30. L. Novotny, “Effective wavelength scaling for optical antennas,” Phys. Rev. Lett 98, 1–4 (2007) [CrossRef] .
31. W. Zhang, H. Fischer, T. Schmid, R. Zenobi, and O. J. F. Martin, “Mode-selective surface-snhanced Raman Spectroscopy Using nanofabricated plasmonic dipole antennas,” J. Phys. Chem C 113, 14672–14675 (2009) [CrossRef] .
32. Y. Chu and K. B. Crozier, “Experimental study of the interaction between localized and propagating surface plasmons,” Opt, Lett. 34, 244–246 (2009) [CrossRef] .
35. D. Gramotnev, A. Pors, M. Willatzen, and S. Bozhevolnyi, “Gap-plasmon nanoantennas and bowtie resonators,” Phys. Rev. B 85, 045434 (2012) [CrossRef] .
36. C. Ciraci, R. T. Hill, J. J. Mock, Y. Urzhumov, A. I. Fernandez-Dominguez, S. A. Maier, J. B. Pendry, A. Chilkoti, and D. R. Smith, “Probing the ultimate limits of plasmonic enhancement,” Science 337, 1072–1074 (2012) [CrossRef] [PubMed] .
37. T. J. Seok, A. Jamshidi, M. Kim, S. Dhuey, A. Lakhani, H. Choo, P. J. Schuck, S. Cabrini, A. M. Schwartzberg, J. Bokor, E. Yablonovitch, and M. C. Wu, “Radiation engineering of optical antennas for maximum field enhancement,” Nano Lett. 11, 2606–2610 (2011) [CrossRef] [PubMed] .
38. Y. Chu, D. Wang, W. Zhu, and K. B. Crozier, “Double resonance surface enhanced Raman scattering substrates: an intuitive coupled oscillator model,” Opt. Express 19, 14919–14928 (2011) [CrossRef] [PubMed] .
41. Yiyang Gong, Selçuk Yerci, Rui Li, Luca Dal Negro, and Jelena Vuckovic, Enhanced light emission from erbium doped silicon nitride in plasmonic metal-insulator-metal structures. Opt. Express 17, (23)20642–20650 (2009) [CrossRef] [PubMed] .
42. R. Bonnett, D. J. McGarvey, A. Harriman, E. J. Land, T. G. Truscott, and U.-J. Winfield, “Photophysical properties of meso-tetraphenylporphyrin and some meso-tetra(hydroxyphenyl)porphyrins,” Photochem. Photobiol. 48, 271–276 (1988) [CrossRef] [PubMed] .
43. M. Rahmani, D. Y. Lei, V. Giannini, B. Lukiyanchuk, M. Ranjbar, T. Y. F. Liew, M. Hong, and S. A. Maier, “Subgroup decomposition of plasmonic resonances in hybrid oligomers: Modeling the resonance lineshape,” Nano Lett. 12, 2101–2106 (2012) [CrossRef] [PubMed] .
44. V. Giannini, A. I. Fernández-Domínguez, S. C. Heck, and S. a. Maier, “Plasmonic nanoantennas: fundamentals and their use in controlling the radiative properties of nanoemitters,” Chem. Rev. 111, 3888–3912 (2011) [CrossRef] [PubMed] .
45. D. Y. Lei, A. I. Fernndez-Domnguez, Y. Sonnefraud, K. Appavoo, R. F. Haglund, J. B. Pendry, and S. A. Maier, “Revealing plasmonic gap modes in particle-on-film systems using dark-field spectroscopy,” ACS. Nano. 6, 1380–1386 (2012) [CrossRef] [PubMed] .
46. P. B. Johnson and R. W. Christy, “Optical constants of the noble metals,” Phys. Rev. Lett. B 6, 4370–4379 (1972).
48. A. Kinkhabwala, Z. Yu, S. Fan, Y. Avlasevich, K. Müllen, and W. E. Moerner, “Large single-molecule fluorescence enhancements produced by a bowtie nanoantenna,” Nat. Photonics 3, 654–657 (2009) [CrossRef] .