Abstract

Abstract

An erratum is presented to correct the writing mistakes of the simulated fluorescence targets’ size.

© 2007 Optical Society of America

In our paper [1], reconstructions have been carried out for simulated single and dual fluorescence targets. However, we have recently discovered that the volume size 0.01 0.01 0.01×0.01cm×cm proposed was a writing mistake.

Therefore, on page 9727, line 6 should be read as “The size of the cubic fluorescent target was 0.1×0.1×0.1cm” and at line 10 for dual targets, “Two small cubic targets with volume size 0.1×0.1×0.1cm were placed at an edge to edge distance varying from 0.3cm to 0.1cm.”

References and links

1. D. Wang, X. Song, and J. Bai, “Adaptive-mesh-based algorithm for fluorescence molecular tomography using an analytical solution,” Opt. Express 15, 9722–9730 (2007). [CrossRef]   [PubMed]  

References

  • View by:
  • |
  • |
  • |

  1. D. Wang, X. Song, and J. Bai, “Adaptive-mesh-based algorithm for fluorescence molecular tomography using an analytical solution,” Opt. Express 15, 9722–9730 (2007).
    [CrossRef] [PubMed]

2007 (1)

Cited By

OSA participates in CrossRef's Cited-By Linking service. Citing articles from OSA journals and other participating publishers are listed here.

Alert me when this article is cited.


Metrics