X. D. Ke, H. Schreier, M. Sutton, and Y. Wang, “Error assessment in stereo-based deformation measurements,” Exp. Mech. 51, 423–441 (2011).

[Crossref]

Y. Q. Wang, M. Sutton, X. D. Ke, H. Schreier, P. Reu, and T. Miller, “On error assessment in stereo-based deformation measurements,” Exp. Mech. 51, 405–422 (2011).

[Crossref]

W. Tong, “Subpixel image registration with reduced bias,” Opt. Lett. 36, 763–765 (2011).

[Crossref]
[PubMed]

B. Pan, K. M. Qian, H. M. Xie, and A. Asundi, “Two-dimensional digital image correlation for in-plane displacement and strain measurement: a review,” Meas. Sci. Technol. 20, 062001 (2009).

[Crossref]

J.-J. Orteu, “3-D computer vision in experimental mechanics,” Opt. Lasers Eng. 47, 282–291 (2009).

[Crossref]

B. Pan, H. Xie, L. Yang, and Z. Wang, “Accurate measurement of satellite antenna surface using 3D digital image correlation technique,” Strain 45, 194–200 (2009).

[Crossref]

Y. Q. Wang, M. A. Sutton, H. A. Bruck, and H. W. Schreier, “Quantitative error assessment in pattern matching: effects of intensity pattern noise, interpolation, strain and image contrast on motion measurements,” Strain 45, 160–178 (2009).

[Crossref]

B. Pan, H. M. Xie, Z. Y. Wang, and K. M. Qian, “Study on subset size selection in digital image correlation for speckle patterns,” Opt. Express 16, 7037–7048 (2008).

[Crossref]
[PubMed]

M. A. Sutton, X. Ke, S. M. Lessner, M. Goldbach, M. Yost, F. Zhao, and H. W. Schreier, “Strain field measurements on mouse carotid arteries using microscopic three-dimensional digital image correlation,” J. Biomed. Mater. Res. A 84, 178–190 (2008).

[Crossref]

L. Robert, F. Nazaret, T. Cutard, and J. J. Orteu, “Use of 3-D digital image correlation to characterize the mechanical behavior of a fiber reinforced refractory castable,” Exp. Mech. 47, 761–773 (2007).

[Crossref]

V. Tiwari, M. Sutton, and S. McNeill, “Assessment of high speed imaging systems for 2D and 3D deformation measurements: methodology development and validation,” Exp. Mech. 47, 561–579 (2007).

[Crossref]

M. A. Sutton, J. Yan, X. Deng, C.-S. Cheng, and P. Zavattieri, “Three-dimensional digital image correlation to quantify deformation and crack-opening displacement in ductile aluminum under mixed-mode I/III loading,” Opt. Eng. 46, 051003(2007).

[Crossref]

T. Siebert, T. Becker, K. Spiltthof, I. Neumann, and R. Krupka, “Error estimations in digital image correlation technique,” Appl. Mech. Mater. 7–8, 265–270 (2007).

[Crossref]

T. Becker, K. Splitthof, T. Siebert, and P. Kletting, “Error estimations of 3D digital image correlation measurements,” Proc. SPIE 6341, 63410F (2006).

[Crossref]

P. Compston, M. Styles, and S. Kalyanasundaram, “Low energy impact damage modes in aluminum foam and polymer foam sandwich structures,” J. Sandw. Struct. Mater. 8, 365–379 (2006).

[Crossref]

K. Zhang, B. Xu, L. X. Tang, and H. M. Shi, “Modeling of binocular vision system for 3D reconstruction with improved genetic algorithms,” Int. J. Adv. Manuf. Technol. 29, 722–728(2006).

[Crossref]

C. S. Fraser and S. Al-Ajlouni, “Zoom-dependent camera calibration in digital close-range photogrammetry,” Photogramm. Eng. Remote Sensing 72, 1017–1026 (2006).

S. Yoneyama, H. Kikuta, A. Kitagawa, and K. Kitamura, “Lens distortion correction for digital image correlation by measuring rigid body displacement,” Opt. Eng. 45, 023602 (2006).

[Crossref]

S. Yoneyama, A. Kitagawa, K. Kitamura, and H. Kikuta, “In-plane displacement measurement using digital image correlation with lens distortion correction,” JSME Int. J. A 49, 458–467 (2006).

[Crossref]

D. Nelson, A. Makino, and T. Schmidt, “Residual stress determination using hole drilling and 3D image correlation,” Exp. Mech. 46, 31–38 (2006).

[Crossref]

M. J. McGinnis, S. Pessiki, and H. Turker, “Application of three-dimensional digital image correlation to the core-drilling method,” Exp. Mech. 45, 359–367 (2005).

[Crossref]

M. Whelan, E. Hack, T. Siebert, R. Burguete, E. A. Patterson, and Q. Saleem, “On the calibration of optical full-field strain measurement systems,” Appl. Mech. Mater. 3–4, 397–402(2005).

[Crossref]

F. Barthelat, Z. Wu, B. C. Prorok, and H. D. Espinosa, “Dynamic torsion testing of nanocrystalline coatings using high-speed photography and digital image correlation,” Exp. Mech. 43, 331–340 (2003).

[Crossref]

Y. L. Lay and C. S. Lin, “Lens distortion correction by adjusting image of calibration target,” Indian J. Pure Appl. Phys. 40, 770–774 (2002).

Z. Y. Zhang, “A flexible new technique for camera calibration,” IEEE Trans. Pattern Anal. Mach. Intell. 22, 1330–1334(2000).

[Crossref]

P. Luo, Y. Chao, M. Sutton, and W. Peters, “Accurate measurement of three-dimensional deformations in deformable and rigid bodies using computer vision,” Exp. Mech. 33, 123–132(1993).

[Crossref]

R. Y. Tsai, “A versatile camera calibration technique for high-accuracy 3D machine vision metrology using off-the-shelf TV cameras and lenses,” IEEE J. Robot. Autom. 3, 323–344(1987).

[Crossref]

C. S. Fraser and S. Al-Ajlouni, “Zoom-dependent camera calibration in digital close-range photogrammetry,” Photogramm. Eng. Remote Sensing 72, 1017–1026 (2006).

B. Pan, K. M. Qian, H. M. Xie, and A. Asundi, “Two-dimensional digital image correlation for in-plane displacement and strain measurement: a review,” Meas. Sci. Technol. 20, 062001 (2009).

[Crossref]

F. Barthelat, Z. Wu, B. C. Prorok, and H. D. Espinosa, “Dynamic torsion testing of nanocrystalline coatings using high-speed photography and digital image correlation,” Exp. Mech. 43, 331–340 (2003).

[Crossref]

T. Siebert, T. Becker, K. Spiltthof, I. Neumann, and R. Krupka, “Error estimations in digital image correlation technique,” Appl. Mech. Mater. 7–8, 265–270 (2007).

[Crossref]

T. Becker, K. Splitthof, T. Siebert, and P. Kletting, “Error estimations of 3D digital image correlation measurements,” Proc. SPIE 6341, 63410F (2006).

[Crossref]

C. Bräer-Burchardt, “A simple new method for precise lens distortion correction of low cost camera systems,” in Pattern Recognition, C.Rasmussen, H.Bülthoff, B.Schölkopf, and M.Giese, eds. (Springer, 2004), pp. 570–577.

[Crossref]

Y. Q. Wang, M. A. Sutton, H. A. Bruck, and H. W. Schreier, “Quantitative error assessment in pattern matching: effects of intensity pattern noise, interpolation, strain and image contrast on motion measurements,” Strain 45, 160–178 (2009).

[Crossref]

M. Whelan, E. Hack, T. Siebert, R. Burguete, E. A. Patterson, and Q. Saleem, “On the calibration of optical full-field strain measurement systems,” Appl. Mech. Mater. 3–4, 397–402(2005).

[Crossref]

P. Luo, Y. Chao, M. Sutton, and W. Peters, “Accurate measurement of three-dimensional deformations in deformable and rigid bodies using computer vision,” Exp. Mech. 33, 123–132(1993).

[Crossref]

M. A. Sutton, J. Yan, X. Deng, C.-S. Cheng, and P. Zavattieri, “Three-dimensional digital image correlation to quantify deformation and crack-opening displacement in ductile aluminum under mixed-mode I/III loading,” Opt. Eng. 46, 051003(2007).

[Crossref]

P. Compston, M. Styles, and S. Kalyanasundaram, “Low energy impact damage modes in aluminum foam and polymer foam sandwich structures,” J. Sandw. Struct. Mater. 8, 365–379 (2006).

[Crossref]

L. Robert, F. Nazaret, T. Cutard, and J. J. Orteu, “Use of 3-D digital image correlation to characterize the mechanical behavior of a fiber reinforced refractory castable,” Exp. Mech. 47, 761–773 (2007).

[Crossref]

M. A. Sutton, J. Yan, X. Deng, C.-S. Cheng, and P. Zavattieri, “Three-dimensional digital image correlation to quantify deformation and crack-opening displacement in ductile aluminum under mixed-mode I/III loading,” Opt. Eng. 46, 051003(2007).

[Crossref]

Y. B. Guo, Y. Yao, X. G. Di, and IEEE, “Research on structural parameter optimization of binocular vision measuring system for parallel mechanism,” in Proceedings of the IEEE International Conference on Mechatronics and Automation (IEEE, 2006), pp. 1131–1135.

F. Barthelat, Z. Wu, B. C. Prorok, and H. D. Espinosa, “Dynamic torsion testing of nanocrystalline coatings using high-speed photography and digital image correlation,” Exp. Mech. 43, 331–340 (2003).

[Crossref]

F. Remondino and C. Fraser, “Digital camera calibration methods considerations and comparisons,” in International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences (ISPRS, 2006), Vol. 36, pp. 266–272.

C. S. Fraser and S. Al-Ajlouni, “Zoom-dependent camera calibration in digital close-range photogrammetry,” Photogramm. Eng. Remote Sensing 72, 1017–1026 (2006).

M. A. Sutton, X. Ke, S. M. Lessner, M. Goldbach, M. Yost, F. Zhao, and H. W. Schreier, “Strain field measurements on mouse carotid arteries using microscopic three-dimensional digital image correlation,” J. Biomed. Mater. Res. A 84, 178–190 (2008).

[Crossref]

Y. B. Guo, Y. Yao, X. G. Di, and IEEE, “Research on structural parameter optimization of binocular vision measuring system for parallel mechanism,” in Proceedings of the IEEE International Conference on Mechatronics and Automation (IEEE, 2006), pp. 1131–1135.

M. Whelan, E. Hack, T. Siebert, R. Burguete, E. A. Patterson, and Q. Saleem, “On the calibration of optical full-field strain measurement systems,” Appl. Mech. Mater. 3–4, 397–402(2005).

[Crossref]

J. Heikkila and O. Silven, “A four-step camera calibration procedure with implicit image correction,” in Proceedings of the 1997 IEEE Computer Society Conference on Computer Vision and Pattern Recognition (IEEE, 1997), pp. 1106–1112.

[Crossref]

P. Compston, M. Styles, and S. Kalyanasundaram, “Low energy impact damage modes in aluminum foam and polymer foam sandwich structures,” J. Sandw. Struct. Mater. 8, 365–379 (2006).

[Crossref]

M. A. Sutton, X. Ke, S. M. Lessner, M. Goldbach, M. Yost, F. Zhao, and H. W. Schreier, “Strain field measurements on mouse carotid arteries using microscopic three-dimensional digital image correlation,” J. Biomed. Mater. Res. A 84, 178–190 (2008).

[Crossref]

X. D. Ke, H. Schreier, M. Sutton, and Y. Wang, “Error assessment in stereo-based deformation measurements,” Exp. Mech. 51, 423–441 (2011).

[Crossref]

Y. Q. Wang, M. Sutton, X. D. Ke, H. Schreier, P. Reu, and T. Miller, “On error assessment in stereo-based deformation measurements,” Exp. Mech. 51, 405–422 (2011).

[Crossref]

S. Yoneyama, A. Kitagawa, K. Kitamura, and H. Kikuta, “In-plane displacement measurement using digital image correlation with lens distortion correction,” JSME Int. J. A 49, 458–467 (2006).

[Crossref]

S. Yoneyama, H. Kikuta, A. Kitagawa, and K. Kitamura, “Lens distortion correction for digital image correlation by measuring rigid body displacement,” Opt. Eng. 45, 023602 (2006).

[Crossref]

S. Yoneyama, H. Kikuta, A. Kitagawa, and K. Kitamura, “Lens distortion correction for digital image correlation by measuring rigid body displacement,” Opt. Eng. 45, 023602 (2006).

[Crossref]

S. Yoneyama, A. Kitagawa, K. Kitamura, and H. Kikuta, “In-plane displacement measurement using digital image correlation with lens distortion correction,” JSME Int. J. A 49, 458–467 (2006).

[Crossref]

S. Yoneyama, A. Kitagawa, K. Kitamura, and H. Kikuta, “In-plane displacement measurement using digital image correlation with lens distortion correction,” JSME Int. J. A 49, 458–467 (2006).

[Crossref]

S. Yoneyama, H. Kikuta, A. Kitagawa, and K. Kitamura, “Lens distortion correction for digital image correlation by measuring rigid body displacement,” Opt. Eng. 45, 023602 (2006).

[Crossref]

T. Becker, K. Splitthof, T. Siebert, and P. Kletting, “Error estimations of 3D digital image correlation measurements,” Proc. SPIE 6341, 63410F (2006).

[Crossref]

T. Siebert, T. Becker, K. Spiltthof, I. Neumann, and R. Krupka, “Error estimations in digital image correlation technique,” Appl. Mech. Mater. 7–8, 265–270 (2007).

[Crossref]

Y. L. Lay and C. S. Lin, “Lens distortion correction by adjusting image of calibration target,” Indian J. Pure Appl. Phys. 40, 770–774 (2002).

M. A. Sutton, X. Ke, S. M. Lessner, M. Goldbach, M. Yost, F. Zhao, and H. W. Schreier, “Strain field measurements on mouse carotid arteries using microscopic three-dimensional digital image correlation,” J. Biomed. Mater. Res. A 84, 178–190 (2008).

[Crossref]

Y. L. Lay and C. S. Lin, “Lens distortion correction by adjusting image of calibration target,” Indian J. Pure Appl. Phys. 40, 770–774 (2002).

P. Luo, Y. Chao, M. Sutton, and W. Peters, “Accurate measurement of three-dimensional deformations in deformable and rigid bodies using computer vision,” Exp. Mech. 33, 123–132(1993).

[Crossref]

D. Nelson, A. Makino, and T. Schmidt, “Residual stress determination using hole drilling and 3D image correlation,” Exp. Mech. 46, 31–38 (2006).

[Crossref]

M. J. McGinnis, S. Pessiki, and H. Turker, “Application of three-dimensional digital image correlation to the core-drilling method,” Exp. Mech. 45, 359–367 (2005).

[Crossref]

V. Tiwari, M. Sutton, and S. McNeill, “Assessment of high speed imaging systems for 2D and 3D deformation measurements: methodology development and validation,” Exp. Mech. 47, 561–579 (2007).

[Crossref]

Y. Q. Wang, M. Sutton, X. D. Ke, H. Schreier, P. Reu, and T. Miller, “On error assessment in stereo-based deformation measurements,” Exp. Mech. 51, 405–422 (2011).

[Crossref]

L. Robert, F. Nazaret, T. Cutard, and J. J. Orteu, “Use of 3-D digital image correlation to characterize the mechanical behavior of a fiber reinforced refractory castable,” Exp. Mech. 47, 761–773 (2007).

[Crossref]

D. Nelson, A. Makino, and T. Schmidt, “Residual stress determination using hole drilling and 3D image correlation,” Exp. Mech. 46, 31–38 (2006).

[Crossref]

T. Siebert, T. Becker, K. Spiltthof, I. Neumann, and R. Krupka, “Error estimations in digital image correlation technique,” Appl. Mech. Mater. 7–8, 265–270 (2007).

[Crossref]

M. Sutton, J. Orteu, and H. Schreier, Image Correlation for Shape, Motion and Deformation Measurements: Basic Concepts, Theory and Applications (Springer Verlag, 2009).

[PubMed]

L. Robert, F. Nazaret, T. Cutard, and J. J. Orteu, “Use of 3-D digital image correlation to characterize the mechanical behavior of a fiber reinforced refractory castable,” Exp. Mech. 47, 761–773 (2007).

[Crossref]

J.-J. Orteu, “3-D computer vision in experimental mechanics,” Opt. Lasers Eng. 47, 282–291 (2009).

[Crossref]

B. Pan, H. Xie, L. Yang, and Z. Wang, “Accurate measurement of satellite antenna surface using 3D digital image correlation technique,” Strain 45, 194–200 (2009).

[Crossref]

B. Pan, K. M. Qian, H. M. Xie, and A. Asundi, “Two-dimensional digital image correlation for in-plane displacement and strain measurement: a review,” Meas. Sci. Technol. 20, 062001 (2009).

[Crossref]

B. Pan, H. M. Xie, Z. Y. Wang, and K. M. Qian, “Study on subset size selection in digital image correlation for speckle patterns,” Opt. Express 16, 7037–7048 (2008).

[Crossref]
[PubMed]

M. Whelan, E. Hack, T. Siebert, R. Burguete, E. A. Patterson, and Q. Saleem, “On the calibration of optical full-field strain measurement systems,” Appl. Mech. Mater. 3–4, 397–402(2005).

[Crossref]

M. J. McGinnis, S. Pessiki, and H. Turker, “Application of three-dimensional digital image correlation to the core-drilling method,” Exp. Mech. 45, 359–367 (2005).

[Crossref]

P. Luo, Y. Chao, M. Sutton, and W. Peters, “Accurate measurement of three-dimensional deformations in deformable and rigid bodies using computer vision,” Exp. Mech. 33, 123–132(1993).

[Crossref]

F. Barthelat, Z. Wu, B. C. Prorok, and H. D. Espinosa, “Dynamic torsion testing of nanocrystalline coatings using high-speed photography and digital image correlation,” Exp. Mech. 43, 331–340 (2003).

[Crossref]

B. Pan, K. M. Qian, H. M. Xie, and A. Asundi, “Two-dimensional digital image correlation for in-plane displacement and strain measurement: a review,” Meas. Sci. Technol. 20, 062001 (2009).

[Crossref]

B. Pan, H. M. Xie, Z. Y. Wang, and K. M. Qian, “Study on subset size selection in digital image correlation for speckle patterns,” Opt. Express 16, 7037–7048 (2008).

[Crossref]
[PubMed]

F. Remondino and C. Fraser, “Digital camera calibration methods considerations and comparisons,” in International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences (ISPRS, 2006), Vol. 36, pp. 266–272.

Y. Q. Wang, M. Sutton, X. D. Ke, H. Schreier, P. Reu, and T. Miller, “On error assessment in stereo-based deformation measurements,” Exp. Mech. 51, 405–422 (2011).

[Crossref]

L. Robert, F. Nazaret, T. Cutard, and J. J. Orteu, “Use of 3-D digital image correlation to characterize the mechanical behavior of a fiber reinforced refractory castable,” Exp. Mech. 47, 761–773 (2007).

[Crossref]

M. Whelan, E. Hack, T. Siebert, R. Burguete, E. A. Patterson, and Q. Saleem, “On the calibration of optical full-field strain measurement systems,” Appl. Mech. Mater. 3–4, 397–402(2005).

[Crossref]

D. Nelson, A. Makino, and T. Schmidt, “Residual stress determination using hole drilling and 3D image correlation,” Exp. Mech. 46, 31–38 (2006).

[Crossref]

Y. Q. Wang, M. Sutton, X. D. Ke, H. Schreier, P. Reu, and T. Miller, “On error assessment in stereo-based deformation measurements,” Exp. Mech. 51, 405–422 (2011).

[Crossref]

X. D. Ke, H. Schreier, M. Sutton, and Y. Wang, “Error assessment in stereo-based deformation measurements,” Exp. Mech. 51, 423–441 (2011).

[Crossref]

M. Sutton, J. Orteu, and H. Schreier, Image Correlation for Shape, Motion and Deformation Measurements: Basic Concepts, Theory and Applications (Springer Verlag, 2009).

[PubMed]

Y. Q. Wang, M. A. Sutton, H. A. Bruck, and H. W. Schreier, “Quantitative error assessment in pattern matching: effects of intensity pattern noise, interpolation, strain and image contrast on motion measurements,” Strain 45, 160–178 (2009).

[Crossref]

M. A. Sutton, X. Ke, S. M. Lessner, M. Goldbach, M. Yost, F. Zhao, and H. W. Schreier, “Strain field measurements on mouse carotid arteries using microscopic three-dimensional digital image correlation,” J. Biomed. Mater. Res. A 84, 178–190 (2008).

[Crossref]

K. Zhang, B. Xu, L. X. Tang, and H. M. Shi, “Modeling of binocular vision system for 3D reconstruction with improved genetic algorithms,” Int. J. Adv. Manuf. Technol. 29, 722–728(2006).

[Crossref]

T. Siebert, T. Becker, K. Spiltthof, I. Neumann, and R. Krupka, “Error estimations in digital image correlation technique,” Appl. Mech. Mater. 7–8, 265–270 (2007).

[Crossref]

T. Becker, K. Splitthof, T. Siebert, and P. Kletting, “Error estimations of 3D digital image correlation measurements,” Proc. SPIE 6341, 63410F (2006).

[Crossref]

M. Whelan, E. Hack, T. Siebert, R. Burguete, E. A. Patterson, and Q. Saleem, “On the calibration of optical full-field strain measurement systems,” Appl. Mech. Mater. 3–4, 397–402(2005).

[Crossref]

J. Heikkila and O. Silven, “A four-step camera calibration procedure with implicit image correction,” in Proceedings of the 1997 IEEE Computer Society Conference on Computer Vision and Pattern Recognition (IEEE, 1997), pp. 1106–1112.

[Crossref]

T. Siebert, T. Becker, K. Spiltthof, I. Neumann, and R. Krupka, “Error estimations in digital image correlation technique,” Appl. Mech. Mater. 7–8, 265–270 (2007).

[Crossref]

T. Becker, K. Splitthof, T. Siebert, and P. Kletting, “Error estimations of 3D digital image correlation measurements,” Proc. SPIE 6341, 63410F (2006).

[Crossref]

P. Compston, M. Styles, and S. Kalyanasundaram, “Low energy impact damage modes in aluminum foam and polymer foam sandwich structures,” J. Sandw. Struct. Mater. 8, 365–379 (2006).

[Crossref]

X. D. Ke, H. Schreier, M. Sutton, and Y. Wang, “Error assessment in stereo-based deformation measurements,” Exp. Mech. 51, 423–441 (2011).

[Crossref]

Y. Q. Wang, M. Sutton, X. D. Ke, H. Schreier, P. Reu, and T. Miller, “On error assessment in stereo-based deformation measurements,” Exp. Mech. 51, 405–422 (2011).

[Crossref]

V. Tiwari, M. Sutton, and S. McNeill, “Assessment of high speed imaging systems for 2D and 3D deformation measurements: methodology development and validation,” Exp. Mech. 47, 561–579 (2007).

[Crossref]

P. Luo, Y. Chao, M. Sutton, and W. Peters, “Accurate measurement of three-dimensional deformations in deformable and rigid bodies using computer vision,” Exp. Mech. 33, 123–132(1993).

[Crossref]

M. Sutton, J. Orteu, and H. Schreier, Image Correlation for Shape, Motion and Deformation Measurements: Basic Concepts, Theory and Applications (Springer Verlag, 2009).

[PubMed]

Y. Q. Wang, M. A. Sutton, H. A. Bruck, and H. W. Schreier, “Quantitative error assessment in pattern matching: effects of intensity pattern noise, interpolation, strain and image contrast on motion measurements,” Strain 45, 160–178 (2009).

[Crossref]

M. A. Sutton, X. Ke, S. M. Lessner, M. Goldbach, M. Yost, F. Zhao, and H. W. Schreier, “Strain field measurements on mouse carotid arteries using microscopic three-dimensional digital image correlation,” J. Biomed. Mater. Res. A 84, 178–190 (2008).

[Crossref]

M. A. Sutton, J. Yan, X. Deng, C.-S. Cheng, and P. Zavattieri, “Three-dimensional digital image correlation to quantify deformation and crack-opening displacement in ductile aluminum under mixed-mode I/III loading,” Opt. Eng. 46, 051003(2007).

[Crossref]

K. Zhang, B. Xu, L. X. Tang, and H. M. Shi, “Modeling of binocular vision system for 3D reconstruction with improved genetic algorithms,” Int. J. Adv. Manuf. Technol. 29, 722–728(2006).

[Crossref]

V. Tiwari, M. Sutton, and S. McNeill, “Assessment of high speed imaging systems for 2D and 3D deformation measurements: methodology development and validation,” Exp. Mech. 47, 561–579 (2007).

[Crossref]

R. Y. Tsai, “A versatile camera calibration technique for high-accuracy 3D machine vision metrology using off-the-shelf TV cameras and lenses,” IEEE J. Robot. Autom. 3, 323–344(1987).

[Crossref]

M. J. McGinnis, S. Pessiki, and H. Turker, “Application of three-dimensional digital image correlation to the core-drilling method,” Exp. Mech. 45, 359–367 (2005).

[Crossref]

X. D. Ke, H. Schreier, M. Sutton, and Y. Wang, “Error assessment in stereo-based deformation measurements,” Exp. Mech. 51, 423–441 (2011).

[Crossref]

Y. Wang, “Error assessment in 3D computer vision,” in Theses and Dissertations (University of South Carolina, 2010).

Y. Q. Wang, M. Sutton, X. D. Ke, H. Schreier, P. Reu, and T. Miller, “On error assessment in stereo-based deformation measurements,” Exp. Mech. 51, 405–422 (2011).

[Crossref]

Y. Q. Wang, M. A. Sutton, H. A. Bruck, and H. W. Schreier, “Quantitative error assessment in pattern matching: effects of intensity pattern noise, interpolation, strain and image contrast on motion measurements,” Strain 45, 160–178 (2009).

[Crossref]

B. Pan, H. Xie, L. Yang, and Z. Wang, “Accurate measurement of satellite antenna surface using 3D digital image correlation technique,” Strain 45, 194–200 (2009).

[Crossref]

M. Whelan, E. Hack, T. Siebert, R. Burguete, E. A. Patterson, and Q. Saleem, “On the calibration of optical full-field strain measurement systems,” Appl. Mech. Mater. 3–4, 397–402(2005).

[Crossref]

F. Barthelat, Z. Wu, B. C. Prorok, and H. D. Espinosa, “Dynamic torsion testing of nanocrystalline coatings using high-speed photography and digital image correlation,” Exp. Mech. 43, 331–340 (2003).

[Crossref]

Z. Hu, H. Xie, J. Lu, T. Hua, and J. Zhu, “Study of the performance of different subpixel image correlation methods in 3D digital image correlation,” Appl. Opt. 49, 4044–4051(2010).

[Crossref]
[PubMed]

B. Pan, H. Xie, L. Yang, and Z. Wang, “Accurate measurement of satellite antenna surface using 3D digital image correlation technique,” Strain 45, 194–200 (2009).

[Crossref]

B. Pan, K. M. Qian, H. M. Xie, and A. Asundi, “Two-dimensional digital image correlation for in-plane displacement and strain measurement: a review,” Meas. Sci. Technol. 20, 062001 (2009).

[Crossref]

B. Pan, H. M. Xie, Z. Y. Wang, and K. M. Qian, “Study on subset size selection in digital image correlation for speckle patterns,” Opt. Express 16, 7037–7048 (2008).

[Crossref]
[PubMed]

K. Zhang, B. Xu, L. X. Tang, and H. M. Shi, “Modeling of binocular vision system for 3D reconstruction with improved genetic algorithms,” Int. J. Adv. Manuf. Technol. 29, 722–728(2006).

[Crossref]

M. A. Sutton, J. Yan, X. Deng, C.-S. Cheng, and P. Zavattieri, “Three-dimensional digital image correlation to quantify deformation and crack-opening displacement in ductile aluminum under mixed-mode I/III loading,” Opt. Eng. 46, 051003(2007).

[Crossref]

B. Pan, H. Xie, L. Yang, and Z. Wang, “Accurate measurement of satellite antenna surface using 3D digital image correlation technique,” Strain 45, 194–200 (2009).

[Crossref]

Y. B. Guo, Y. Yao, X. G. Di, and IEEE, “Research on structural parameter optimization of binocular vision measuring system for parallel mechanism,” in Proceedings of the IEEE International Conference on Mechatronics and Automation (IEEE, 2006), pp. 1131–1135.

S. Yoneyama, H. Kikuta, A. Kitagawa, and K. Kitamura, “Lens distortion correction for digital image correlation by measuring rigid body displacement,” Opt. Eng. 45, 023602 (2006).

[Crossref]

S. Yoneyama, A. Kitagawa, K. Kitamura, and H. Kikuta, “In-plane displacement measurement using digital image correlation with lens distortion correction,” JSME Int. J. A 49, 458–467 (2006).

[Crossref]

M. A. Sutton, X. Ke, S. M. Lessner, M. Goldbach, M. Yost, F. Zhao, and H. W. Schreier, “Strain field measurements on mouse carotid arteries using microscopic three-dimensional digital image correlation,” J. Biomed. Mater. Res. A 84, 178–190 (2008).

[Crossref]

M. A. Sutton, J. Yan, X. Deng, C.-S. Cheng, and P. Zavattieri, “Three-dimensional digital image correlation to quantify deformation and crack-opening displacement in ductile aluminum under mixed-mode I/III loading,” Opt. Eng. 46, 051003(2007).

[Crossref]

K. Zhang, B. Xu, L. X. Tang, and H. M. Shi, “Modeling of binocular vision system for 3D reconstruction with improved genetic algorithms,” Int. J. Adv. Manuf. Technol. 29, 722–728(2006).

[Crossref]

Z. Y. Zhang, “A flexible new technique for camera calibration,” IEEE Trans. Pattern Anal. Mach. Intell. 22, 1330–1334(2000).

[Crossref]

M. A. Sutton, X. Ke, S. M. Lessner, M. Goldbach, M. Yost, F. Zhao, and H. W. Schreier, “Strain field measurements on mouse carotid arteries using microscopic three-dimensional digital image correlation,” J. Biomed. Mater. Res. A 84, 178–190 (2008).

[Crossref]

T. Siebert, T. Becker, K. Spiltthof, I. Neumann, and R. Krupka, “Error estimations in digital image correlation technique,” Appl. Mech. Mater. 7–8, 265–270 (2007).

[Crossref]

M. Whelan, E. Hack, T. Siebert, R. Burguete, E. A. Patterson, and Q. Saleem, “On the calibration of optical full-field strain measurement systems,” Appl. Mech. Mater. 3–4, 397–402(2005).

[Crossref]

D. Nelson, A. Makino, and T. Schmidt, “Residual stress determination using hole drilling and 3D image correlation,” Exp. Mech. 46, 31–38 (2006).

[Crossref]

P. Luo, Y. Chao, M. Sutton, and W. Peters, “Accurate measurement of three-dimensional deformations in deformable and rigid bodies using computer vision,” Exp. Mech. 33, 123–132(1993).

[Crossref]

F. Barthelat, Z. Wu, B. C. Prorok, and H. D. Espinosa, “Dynamic torsion testing of nanocrystalline coatings using high-speed photography and digital image correlation,” Exp. Mech. 43, 331–340 (2003).

[Crossref]

V. Tiwari, M. Sutton, and S. McNeill, “Assessment of high speed imaging systems for 2D and 3D deformation measurements: methodology development and validation,” Exp. Mech. 47, 561–579 (2007).

[Crossref]

X. D. Ke, H. Schreier, M. Sutton, and Y. Wang, “Error assessment in stereo-based deformation measurements,” Exp. Mech. 51, 423–441 (2011).

[Crossref]

Y. Q. Wang, M. Sutton, X. D. Ke, H. Schreier, P. Reu, and T. Miller, “On error assessment in stereo-based deformation measurements,” Exp. Mech. 51, 405–422 (2011).

[Crossref]

L. Robert, F. Nazaret, T. Cutard, and J. J. Orteu, “Use of 3-D digital image correlation to characterize the mechanical behavior of a fiber reinforced refractory castable,” Exp. Mech. 47, 761–773 (2007).

[Crossref]

M. J. McGinnis, S. Pessiki, and H. Turker, “Application of three-dimensional digital image correlation to the core-drilling method,” Exp. Mech. 45, 359–367 (2005).

[Crossref]

R. Y. Tsai, “A versatile camera calibration technique for high-accuracy 3D machine vision metrology using off-the-shelf TV cameras and lenses,” IEEE J. Robot. Autom. 3, 323–344(1987).

[Crossref]

Z. Y. Zhang, “A flexible new technique for camera calibration,” IEEE Trans. Pattern Anal. Mach. Intell. 22, 1330–1334(2000).

[Crossref]

Y. L. Lay and C. S. Lin, “Lens distortion correction by adjusting image of calibration target,” Indian J. Pure Appl. Phys. 40, 770–774 (2002).

K. Zhang, B. Xu, L. X. Tang, and H. M. Shi, “Modeling of binocular vision system for 3D reconstruction with improved genetic algorithms,” Int. J. Adv. Manuf. Technol. 29, 722–728(2006).

[Crossref]

M. A. Sutton, X. Ke, S. M. Lessner, M. Goldbach, M. Yost, F. Zhao, and H. W. Schreier, “Strain field measurements on mouse carotid arteries using microscopic three-dimensional digital image correlation,” J. Biomed. Mater. Res. A 84, 178–190 (2008).

[Crossref]

P. Compston, M. Styles, and S. Kalyanasundaram, “Low energy impact damage modes in aluminum foam and polymer foam sandwich structures,” J. Sandw. Struct. Mater. 8, 365–379 (2006).

[Crossref]

S. Yoneyama, A. Kitagawa, K. Kitamura, and H. Kikuta, “In-plane displacement measurement using digital image correlation with lens distortion correction,” JSME Int. J. A 49, 458–467 (2006).

[Crossref]

B. Pan, K. M. Qian, H. M. Xie, and A. Asundi, “Two-dimensional digital image correlation for in-plane displacement and strain measurement: a review,” Meas. Sci. Technol. 20, 062001 (2009).

[Crossref]

S. Yoneyama, H. Kikuta, A. Kitagawa, and K. Kitamura, “Lens distortion correction for digital image correlation by measuring rigid body displacement,” Opt. Eng. 45, 023602 (2006).

[Crossref]

M. A. Sutton, J. Yan, X. Deng, C.-S. Cheng, and P. Zavattieri, “Three-dimensional digital image correlation to quantify deformation and crack-opening displacement in ductile aluminum under mixed-mode I/III loading,” Opt. Eng. 46, 051003(2007).

[Crossref]

J.-J. Orteu, “3-D computer vision in experimental mechanics,” Opt. Lasers Eng. 47, 282–291 (2009).

[Crossref]

C. S. Fraser and S. Al-Ajlouni, “Zoom-dependent camera calibration in digital close-range photogrammetry,” Photogramm. Eng. Remote Sensing 72, 1017–1026 (2006).

T. Becker, K. Splitthof, T. Siebert, and P. Kletting, “Error estimations of 3D digital image correlation measurements,” Proc. SPIE 6341, 63410F (2006).

[Crossref]

B. Pan, H. Xie, L. Yang, and Z. Wang, “Accurate measurement of satellite antenna surface using 3D digital image correlation technique,” Strain 45, 194–200 (2009).

[Crossref]

Y. Q. Wang, M. A. Sutton, H. A. Bruck, and H. W. Schreier, “Quantitative error assessment in pattern matching: effects of intensity pattern noise, interpolation, strain and image contrast on motion measurements,” Strain 45, 160–178 (2009).

[Crossref]

C. Bräer-Burchardt, “A simple new method for precise lens distortion correction of low cost camera systems,” in Pattern Recognition, C.Rasmussen, H.Bülthoff, B.Schölkopf, and M.Giese, eds. (Springer, 2004), pp. 570–577.

[Crossref]

M. Sutton, J. Orteu, and H. Schreier, Image Correlation for Shape, Motion and Deformation Measurements: Basic Concepts, Theory and Applications (Springer Verlag, 2009).

[PubMed]

F. Remondino and C. Fraser, “Digital camera calibration methods considerations and comparisons,” in International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences (ISPRS, 2006), Vol. 36, pp. 266–272.

Y. Wang, “Error assessment in 3D computer vision,” in Theses and Dissertations (University of South Carolina, 2010).

J. Heikkila and O. Silven, “A four-step camera calibration procedure with implicit image correction,” in Proceedings of the 1997 IEEE Computer Society Conference on Computer Vision and Pattern Recognition (IEEE, 1997), pp. 1106–1112.

[Crossref]

Y. B. Guo, Y. Yao, X. G. Di, and IEEE, “Research on structural parameter optimization of binocular vision measuring system for parallel mechanism,” in Proceedings of the IEEE International Conference on Mechatronics and Automation (IEEE, 2006), pp. 1131–1135.