Abstract
Three-dimensional (3D) imaging by holographic tomography can be performed for a fixed detector through rotation of either the object or the illumination beam. We have previously presented a paraxial treatment to distinguish between these two approaches using transfer function analysis. In particular, the cutoff of the transfer function when rotating the illumination about one axis was calculated analyt ically using one-dimensional Fourier integration of the defocused transfer function. However, high numerical aperture objectives are usually used in experimental arrangements, and the previous paraxial model is not accurate in this case. Hence, in this analysis, we utilize 3D analytical geometry to derive the imaging behavior for holographic tomography under high-aperture conditions. As expected, the cutoff of the new transfer function leads to a similar peanut shape, but we found that there was no line singularity as was previously observed in the paraxial case. We also present the theory of coherent transfer function for holographic tomography under object rotation while the detector is kept stationary. The derived coherent transfer functions offer quantitative insights into the image formation of a diffractive tomography system.
© 2009 Optical Society of America
Full Article | PDF ArticleMore Like This
Shan Shan Kou and Colin J. R. Sheppard
Opt. Lett. 33(20) 2362-2364 (2008)
Timothy R. Hillman, Thomas Gutzler, Sergey A. Alexandrov, and David D. Sampson
Opt. Express 17(10) 7873-7892 (2009)
Ke Si, Wei Gong, and Colin J. R. Sheppard
Appl. Opt. 48(5) 810-817 (2009)