Abstract

This erratum contains corrections to Optica 7, 252 (2020). [CrossRef]  

© 2020 Optical Society of America under the terms of the OSA Open Access Publishing Agreement

Corrections

27 October 2020: A typographical correction was made to the article-title.

 figure: Fig. 1.

Fig. 1. (b) MTF obtained from the PSF (inset: contrast in log scale).

Download Full Size | PPT Slide | PDF

In Ref. [1], the plot of MTF obtained from the PSF in Fig. 1(b) had a mistake in the horizontal (Resolution) axis. The correct figure is provided here.

This mistake occurred during the post-processing analysis of the MTF due to an incorrect assumption of the total area across which the PSF was measured with our CMOS camera sensor, which ultimately led to an incorrect scaling of the x-axis.

REFERENCE

1. M. Meem, S. Banerji, C. Pies, T. Oberbiermann, A. Majumder, B. Sensale-Rodriguez, and R. Menon, "Large-area, high-numerical-aperture multi-level diffractive lens via inverse design," Optica 7, 252–253 (2020). [CrossRef]  

References

  • View by:
  • |
  • |
  • |

  1. M. Meem, S. Banerji, C. Pies, T. Oberbiermann, A. Majumder, B. Sensale-Rodriguez, and R. Menon, "Large-area, high-numerical-aperture multi-level diffractive lens via inverse design," Optica 7, 252–253 (2020).
    [Crossref]

2020 (1)

Banerji, S.

Majumder, A.

Meem, M.

Menon, R.

Oberbiermann, T.

Pies, C.

Sensale-Rodriguez, B.

Cited By

OSA participates in Crossref's Cited-By Linking service. Citing articles from OSA journals and other participating publishers are listed here.

Alert me when this article is cited.


Figures (1)

Fig. 1.
Fig. 1. (b) MTF obtained from the PSF (inset: contrast in log scale).

Metrics