Abstract

Perovskite is an emerging material for high performance solar cell application with low-cost solution-processable fabrication. As an ink, perovskite composition can be easily modified to create semi-transparent solar cells for window replacement. To enable scalable large-scale production, the spray process is one of the major candidates. In this work, we developed sequential spray deposition (SSD) to create double layer absorbers from different dimensional perovskites. SSD, for the first time, achieves layer-by-layer deposition of different perovskite materials for stacked architecture. To demonstrate the benefits, we spray-coated lower dimension, more stable perovskite onto high performance yet sensitive 3D semi-transparent perovskite. SSD performed under a humid environment (40 - 50% RH) brings about better film stability and retains good performance of 3D perovskite. Sequential spray deposition opens new routes for various stacking designs and large-scale production under economical ambient conditions.

© 2020 Optical Society of America under the terms of the OSA Open Access Publishing Agreement

Full Article  |  PDF Article

References

  • View by:
  • |
  • |
  • |

  1. H. S. Jung and N. G. Park, “Perovskite solar cells: From materials to devices,” Small 11(1), 10–25 (2015).
    [Crossref]
  2. S. A. Veldhuis, P. P. Boix, N. Yantara, M. Li, T. C. Sum, N. Mathews, and S. G. Mhaisalkar, “Perovskite materials for light-emitting diodes and lasers,” Adv. Mater. 28(32), 6804–6834 (2016).
    [Crossref]
  3. J. S. Shaikh, N. S. Shaikh, A. D. Sheikh, S. S. Mali, A. J. Kale, P. Kanjanaboos, C. K. Hong, J. H. Kim, and P. S. Patil, “Perovskite solar cells: In pursuit of efficiency and stability,” Mater. Des. 136, 54–80 (2017).
    [Crossref]
  4. P. P. Boix, S. Agarwala, T. M. Koh, N. Mathews, and S. G. Mhaisalkar, “Perovskite solar cells: Beyond methylammonium lead iodide,” J. Phys. Chem. Lett. 6(5), 898–907 (2015).
    [Crossref]
  5. M. Afzaal and H. M. Yates, “Growth patterns and properties of aerosol-assisted chemical vapor deposition of CH3NH3PbI3 films in a single step,” Surf. Coat. Technol. 321, 336–340 (2017).
    [Crossref]
  6. S. Pramchu, A. P. Jaroenjittichai, and Y. Laosiritaworn, “Surface doping of Sn in orthorhombic CH3NH3PbI3 for potential perovskite solar cells: first principles study,” Surf. Coat. Technol. 306, 285–289 (2016).
    [Crossref]
  7. P. Luo, Y. Zhou, W. Xia, S. Zhou, J. Liu, Y. Lu, C. Xu, and L. Sun, “Colorful, bandgap-tunable, and air-stable CsPb(IxBr1-x)3 inorganic perovskite films via a novel sequential chemical vapor deposition,” Ceram. Int. 44(11), 12783–12788 (2018).
    [Crossref]
  8. J. Ponchai, P. Kaewurai, C. Boonthum, K. Pinsuwan, T. Supasai, S. Sahasithiwat, and P. Kanjanaboos, “Modifying morphology and defects of low-dimensional, semi-transparent perovskite thin films: Via solvent type,” RSC Adv. 9(21), 12047–12054 (2019).
    [Crossref]
  9. Z. Fang and Z. Yi, “First principles study on mixed orthorhombic perovskite CH3NH3Pb(I1-xBrx)3,” Chem. Phys. Lett. 687, 19–22 (2017).
    [Crossref]
  10. L. Yuan, Z. Wang, R. Duan, P. Huang, K. Zhang, Q. Chen, N. K. Allam, Y. Zhou, B. Song, and Y. Li, “Semi-transparent perovskite solar cells: Unveiling the trade-off between transparency and efficiency,” J. Mater. Chem. A 6(40), 19696–19702 (2018).
    [Crossref]
  11. U. Mehmood, A. Al-Ahmed, M. Afzaal, F. A. Al-Sulaiman, and M. Daud, “Recent progress and remaining challenges in organometallic halides based perovskite solar cells,” Renewable Sustainable Energy Rev. 78, 1–14 (2017).
    [Crossref]
  12. Q. M. Hong, R. P. Xu, T. Y. Jin, J. X. Tang, and Y. Q. Li, “Unraveling the light-induced degradation mechanism of CH3NH3PbI3 perovskite films,” Org. Electron. 67, 19–25 (2019).
    [Crossref]
  13. M. Ouafi, B. Jaber, L. Atourki, R. Bekkari, and L. Laânab, “Improving UV stability of MAPbI3 perovskite thin films by bromide incorporation,” J. Alloys Compd. 746, 391–398 (2018).
    [Crossref]
  14. K. Pinsuwan, C. Boonthum, T. Supasai, S. Sahasithiwat, P. Kumnorkaew, and P. Kanjanaboos, “Solar perovskite thin films with enhanced mechanical, thermal, UV, and moisture stability via vacuum-assisted deposition,” J. Mater. Sci. 55(8), 3484–3494 (2020).
    [Crossref]
  15. A. Buin, P. Pietsch, J. Xu, O. Voznyy, A. H. Ip, R. Comin, and E. H. Sargent, “Materials processing routes to trap-free halide perovskites,” Nano Lett. 14(11), 6281–6286 (2014).
    [Crossref]
  16. I. C. Smith, E. T. Hoke, D. Solis-Ibarra, M. D. McGehee, and H. I. Karunadasa, “A layered hybrid perovskite solar-cell absorber with enhanced moisture stability,” Angew. Chem. Int. Ed. 53(42), 11232–11235 (2014).
    [Crossref]
  17. D. H. Cao, C. C. Stoumpos, O. K. Farha, J. T. Hupp, and M. G. Kanatzidis, “2D homologous perovskites as light-absorbing materials for solar cell applications,” J. Am. Chem. Soc. 137(24), 7843–7850 (2015).
    [Crossref]
  18. L. N. Quan, M. Yuan, R. Comin, O. Voznyy, E. M. Beauregard, S. Hoogland, A. Buin, A. R. Kirmani, K. Zhao, A. Amassian, D. H. Kim, and E. H. Sargent, “Ligand-stabilized reduced-dimensionality perovskites,” J. Am. Chem. Soc. 138(8), 2649–2655 (2016).
    [Crossref]
  19. A. Naikaew, P. Kumnorkaew, T. Supasai, S. Suwanna, R. Hunkao, T. Srikhirin, and P. Kanjanaboos, “Enhancing high humidity stability of quasi-2D perovskite thin films through mixed cation doping and solvent engineering,” ChemNanoMat 5(10), 1280–1288 (2019).
    [Crossref]
  20. K. Z. Swe, A. Naikaew, P. Kaewurai, P. Pansa-Ngat, S. Sahasithiwat, L. Kangkaew, S. Rugmai, S. Soontaranon, and P. Kanjanaboos, “Layered perovskite with compact morphology and reduced grain size via vacuum assisted crystallization for luminescence applications,” Opt. Mater. Express 10(5), 1182 (2020).
    [Crossref]
  21. T. M. Koh, V. Shanmugam, X. Guo, S. S. Lim, O. Filonik, E. M. Herzig, P. Müller-Buschbaum, V. Swamy, S. T. Chien, S. G. Mhaisalkar, and N. Mathews, “Enhancing moisture tolerance in efficient hybrid 3D/2D perovskite photovoltaics,” J. Mater. Chem. A 6(5), 2122–2128 (2018).
    [Crossref]
  22. Y. Lin, Y. Bai, Y. Fang, Z. Chen, S. Yang, X. Zheng, S. Tang, Y. Liu, J. Zhao, and J. Huang, “Enhanced thermal stability in perovskite solar cells by assembling 2D/3D stacking structures,” J. Phys. Chem. Lett. 9(3), 654–658 (2018).
    [Crossref]
  23. Y. Lin, Y. Bai, Y. Fang, Q. Wang, Y. Deng, and J. Huang, “Suppressed ion migration in low-dimensional perovskites,” ACS Energy Lett. 2(7), 1571–1572 (2017).
    [Crossref]
  24. F. Li, C. Bao, H. Gao, W. Zhu, T. Yu, J. Yang, G. Fu, X. Zhou, and Z. Zou, “A facile spray-assisted fabrication of homogenous flat CH3NH3PbI3 films for high performance mesostructure perovskite solar cells,” Mater. Lett. 157, 38–41 (2015).
    [Crossref]
  25. M. Ramesh, K. M. Boopathi, T. Y. Huang, Y. C. Huang, C. S. Tsao, and C. W. Chu, “Using an airbrush pen for layer-by-layer growth of continuous perovskite thin films for hybrid solar cells,” ACS Appl. Mater. Interfaces 7(4), 2359–2366 (2015).
    [Crossref]
  26. J. H. Heo, M. H. Lee, M. H. Jang, and S. H. Im, “Highly efficient CH3NH3PbI3-xClx mixed halide perovskite solar cells prepared by re-dissolution and crystal grain growth via spray coating,” J. Mater. Chem. A 4(45), 17636–17642 (2016).
    [Crossref]
  27. H. Chen, X. Ding, X. Pan, T. Hayat, A. Alsaedi, Y. Ding, and S. Dai, “Comprehensive studies of air-brush spray deposition used in fabricating high-efficiency CH3NH3PbI3 perovskite solar cells: Combining theories with practices,” J. Power Sources 402, 82–90 (2018).
    [Crossref]
  28. M. A. Mahmud, T. Duong, Y. Yin, H. T. Pham, D. Walter, J. Peng, Y. Wu, L. Li, H. Shen, N. Wu, N. Mozaffari, G. Andersson, K. R. Catchpole, K. J. Weber, and T. P. White, “Double-sided surface passivation of 3D perovskite film for high-efficiency mixed-dimensional perovskite solar cells,” Adv. Funct. Mater. 30(7), 1907962 (2020).
    [Crossref]
  29. J. P. Correa-Baena, W. Tress, K. Domanski, E. H. Anaraki, S. H. Turren-Cruz, B. Roose, P. P. Boix, M. Grätzel, M. Saliba, A. Abate, and A. Hagfeldt, “Identifying and suppressing interfacial recombination to achieve high open-circuit voltage in perovskite solar cells,” Energy Environ. Sci. 10(5), 1207–1212 (2017).
    [Crossref]
  30. M. Stolterfoht, C. M. Wolff, J. A. Márquez, S. Zhang, C. J. Hages, D. Rothhardt, S. Albrecht, P. L. Burn, P. Meredith, T. Unold, and D. Neher, “Visualization and suppression of interfacial recombination for high-efficiency large-area pin perovskite solar cells,” Nat. Energy 3(10), 847–854 (2018).
    [Crossref]
  31. Z. Wang, Q. Lin, F. P. Chmiel, N. Sakai, L. M. Herz, and H. J. Snaith, “Efficient ambient-air-stable solar cells with 2D-3D heterostructured butylammonium-caesium-formamidinium lead halide perovskites,” Nat. Energy 2(9), 17135 (2017).
    [Crossref]
  32. S. Gharibzadeh, B. Abdollahi Nejand, M. Jakoby, T. Abzieher, D. Hauschild, S. Moghadamzadeh, J. A. Schwenzer, P. Brenner, R. Schmager, A. A. Haghighirad, L. Weinhardt, U. Lemmer, B. S. Richards, I. A. Howard, and U. W. Paetzold, “Record open-circuit voltage wide-bandgap perovskite solar cells utilizing 2D/3D Perovskite Heterostructure,” Adv. Energy Mater. 9(21), 1803699 (2019).
    [Crossref]
  33. W. Fu, J. Wang, L. Zuo, K. Gao, F. Liu, D. S. Ginger, and A. K.-Y. Jen, “Two-dimensional perovskite solar cells with 14.1% power conversion efficiency and 0.68% external radiative efficiency,” ACS Energy Lett. 3(9), 2086–2093 (2018).
    [Crossref]
  34. F. Zhang, H. Lu, J. Tong, J. J. Berry, M. C. Beard, and K. Zhu, “Advances in two-dimensional organic–inorganic hybrid perovskites,” Energy Environ. Sci. 13(4), 1154–1186 (2020).
    [Crossref]
  35. H. Zheng, D. Liu, Y. Wang, Y. Yang, H. Li, T. Zhang, H. Chen, L. Ji, Z. Chen, and S. Li, “Synergistic effect of additives on 2D perovskite film towards efficient and stable solar cell,” Chem. Eng. J. 389, 124266 (2020).
    [Crossref]
  36. T. M. Koh, V. Shanmugam, J. Schlipf, L. Oesinghaus, P. Müller-Buschbaum, N. Ramakrishnan, V. Swamy, N. Mathews, P. P. Boix, and S. G. Mhaisalkar, “Nanostructuring mixed-dimensional perovskites: a route toward tunable, efficient photovoltaics,” Adv. Mater. 28(19), 3653–3661 (2016).
    [Crossref]
  37. C. Ma, C. Leng, Y. Ji, X. Wei, K. Sun, L. Tang, J. Yang, W. Luo, C. Li, Y. Deng, S. Feng, J. Shen, S. Lu, C. Du, and H. Shi, “2D/3D perovskite hybrids as moisture-tolerant and efficient light absorbers for solar cells,” Nanoscale 8(43), 18309–18314 (2016).
    [Crossref]
  38. Y. Zhao, A. M. Nardes, and K. Zhu, “Mesoporous perovskite solar cells: Material composition, charge-carrier dynamics, and device characteristics,” Faraday Discuss. 176, 301–312 (2014).
    [Crossref]
  39. D. Cui, Z. Yang, D. Yang, X. Ren, Y. Liu, Q. Wei, H. Fan, J. Zeng, and S. Liu, “Color-tuned perovskite films prepared for efficient solar cell applications,” J. Phys. Chem. C 120(1), 42–47 (2016).
    [Crossref]
  40. B. El Cohen, M. Wierzbowska, and L. Etgar, “High efficiency and high open circuit voltage in quasi 2D perovskite based solar cells,” Adv. Funct. Mater. 27(5), 1604733 (2017).
    [Crossref]
  41. G. Chai, S. Luo, H. Zhou, and W. A. Daoud, “CH3NH3PbI3-xBrx perovskite solar cells via spray assisted two-step deposition: Impact of bromide on stability and cell performance,” Mater. Des. 125, 222–229 (2017).
    [Crossref]
  42. L. Atourki, E. Vega, B. Marí, M. Mollar, H. Ait Ahsaine, K. Bouabid, and A. Ihlal, “Role of the chemical substitution on the structural and luminescence properties of the mixed halide perovskite thin MAPbI3-x Brx (0 ≤ x ≤ 1) films,” Appl. Surf. Sci. 371, 112–117 (2016).
    [Crossref]
  43. F. Guo, B. Zhang, J. Wang, H. Bai, R. Guo, Y. Huang, and P. Ren, “Facile solvothermal method to synthesize hybrid perovskite CH3NH3PbX3 (X = I, Br, Cl) crystals: publisher’s note,” Opt. Mater. Express 8(2), 210 (2018).
    [Crossref]
  44. Y. Lv, Y. Shi, X. Song, J. Liu, M. Wang, S. Wang, Y. Feng, S. Jin, and C. Hao, “Bromine doping as an efficient strategy to reduce the interfacial defects in hybrid two-dimensional/three-dimensional stacking perovskite solar cells,” ACS Appl. Mater. Interfaces 10(37), 31755–31764 (2018).
    [Crossref]
  45. J. W. Lim, H. Wang, C. H. Choi, H. Kwon, L. N. Quan, W. T. Park, Y. Y. Noh, and D. H. Kim, “Self-powered reduced-dimensionality perovskite photodiodes with controlled crystalline phase and improved stability,” Nano Energy 57, 761–770 (2019).
    [Crossref]
  46. J. Chen, J. Y. Seo, and N. G. Park, “Simultaneous improvement of photovoltaic performance and stability by in situ formation of 2D perovskite at (FAPbI3)0.88(CsPbBr3)0.12/CuSCN interface,” Adv. Energy Mater. 8(12), 1702714 (2018).
    [Crossref]
  47. D. Bae, A. Palmstrom, K. Roelofs, B. Mei, I. Chorkendorff, S. F. Bent, and P. C. K. Vesborg, “Tailoring Mixed-Halide, Wide-Gap Perovskites via Multistep Conversion Process,” ACS Appl. Mater. Interfaces 8(23), 14301–14306 (2016).
    [Crossref]
  48. Z. Liang, S. Zhang, X. Xu, N. Wang, J. Wang, X. Wang, Z. Bi, G. Xu, N. Yuan, and J. Ding, “A large grain size perovskite thin film with a dense structure for planar heterojunction solar cells via spray deposition under ambient conditions,” RSC Adv. 5(74), 60562–60569 (2015).
    [Crossref]
  49. B. El Cohen, M. Wierzbowska, and L. Etgar, “High efficiency quasi 2D lead bromide perovskite solar cells using various barrier molecules,,” Sustain. Energy Fuels 1(9), 1935–1943 (2017).
    [Crossref]
  50. T. Zhao, C. C. Chueh, Q. Chen, A. Rajagopal, and A. K. Y. Jen, “Defect Passivation of Organic-Inorganic Hybrid Perovskites by Diammonium Iodide toward High-Performance Photovoltaic Devices,” ACS Energy Lett. 1(4), 757–763 (2016).
    [Crossref]

2020 (5)

K. Pinsuwan, C. Boonthum, T. Supasai, S. Sahasithiwat, P. Kumnorkaew, and P. Kanjanaboos, “Solar perovskite thin films with enhanced mechanical, thermal, UV, and moisture stability via vacuum-assisted deposition,” J. Mater. Sci. 55(8), 3484–3494 (2020).
[Crossref]

K. Z. Swe, A. Naikaew, P. Kaewurai, P. Pansa-Ngat, S. Sahasithiwat, L. Kangkaew, S. Rugmai, S. Soontaranon, and P. Kanjanaboos, “Layered perovskite with compact morphology and reduced grain size via vacuum assisted crystallization for luminescence applications,” Opt. Mater. Express 10(5), 1182 (2020).
[Crossref]

M. A. Mahmud, T. Duong, Y. Yin, H. T. Pham, D. Walter, J. Peng, Y. Wu, L. Li, H. Shen, N. Wu, N. Mozaffari, G. Andersson, K. R. Catchpole, K. J. Weber, and T. P. White, “Double-sided surface passivation of 3D perovskite film for high-efficiency mixed-dimensional perovskite solar cells,” Adv. Funct. Mater. 30(7), 1907962 (2020).
[Crossref]

F. Zhang, H. Lu, J. Tong, J. J. Berry, M. C. Beard, and K. Zhu, “Advances in two-dimensional organic–inorganic hybrid perovskites,” Energy Environ. Sci. 13(4), 1154–1186 (2020).
[Crossref]

H. Zheng, D. Liu, Y. Wang, Y. Yang, H. Li, T. Zhang, H. Chen, L. Ji, Z. Chen, and S. Li, “Synergistic effect of additives on 2D perovskite film towards efficient and stable solar cell,” Chem. Eng. J. 389, 124266 (2020).
[Crossref]

2019 (5)

A. Naikaew, P. Kumnorkaew, T. Supasai, S. Suwanna, R. Hunkao, T. Srikhirin, and P. Kanjanaboos, “Enhancing high humidity stability of quasi-2D perovskite thin films through mixed cation doping and solvent engineering,” ChemNanoMat 5(10), 1280–1288 (2019).
[Crossref]

Q. M. Hong, R. P. Xu, T. Y. Jin, J. X. Tang, and Y. Q. Li, “Unraveling the light-induced degradation mechanism of CH3NH3PbI3 perovskite films,” Org. Electron. 67, 19–25 (2019).
[Crossref]

J. Ponchai, P. Kaewurai, C. Boonthum, K. Pinsuwan, T. Supasai, S. Sahasithiwat, and P. Kanjanaboos, “Modifying morphology and defects of low-dimensional, semi-transparent perovskite thin films: Via solvent type,” RSC Adv. 9(21), 12047–12054 (2019).
[Crossref]

S. Gharibzadeh, B. Abdollahi Nejand, M. Jakoby, T. Abzieher, D. Hauschild, S. Moghadamzadeh, J. A. Schwenzer, P. Brenner, R. Schmager, A. A. Haghighirad, L. Weinhardt, U. Lemmer, B. S. Richards, I. A. Howard, and U. W. Paetzold, “Record open-circuit voltage wide-bandgap perovskite solar cells utilizing 2D/3D Perovskite Heterostructure,” Adv. Energy Mater. 9(21), 1803699 (2019).
[Crossref]

J. W. Lim, H. Wang, C. H. Choi, H. Kwon, L. N. Quan, W. T. Park, Y. Y. Noh, and D. H. Kim, “Self-powered reduced-dimensionality perovskite photodiodes with controlled crystalline phase and improved stability,” Nano Energy 57, 761–770 (2019).
[Crossref]

2018 (11)

J. Chen, J. Y. Seo, and N. G. Park, “Simultaneous improvement of photovoltaic performance and stability by in situ formation of 2D perovskite at (FAPbI3)0.88(CsPbBr3)0.12/CuSCN interface,” Adv. Energy Mater. 8(12), 1702714 (2018).
[Crossref]

W. Fu, J. Wang, L. Zuo, K. Gao, F. Liu, D. S. Ginger, and A. K.-Y. Jen, “Two-dimensional perovskite solar cells with 14.1% power conversion efficiency and 0.68% external radiative efficiency,” ACS Energy Lett. 3(9), 2086–2093 (2018).
[Crossref]

F. Guo, B. Zhang, J. Wang, H. Bai, R. Guo, Y. Huang, and P. Ren, “Facile solvothermal method to synthesize hybrid perovskite CH3NH3PbX3 (X = I, Br, Cl) crystals: publisher’s note,” Opt. Mater. Express 8(2), 210 (2018).
[Crossref]

Y. Lv, Y. Shi, X. Song, J. Liu, M. Wang, S. Wang, Y. Feng, S. Jin, and C. Hao, “Bromine doping as an efficient strategy to reduce the interfacial defects in hybrid two-dimensional/three-dimensional stacking perovskite solar cells,” ACS Appl. Mater. Interfaces 10(37), 31755–31764 (2018).
[Crossref]

M. Ouafi, B. Jaber, L. Atourki, R. Bekkari, and L. Laânab, “Improving UV stability of MAPbI3 perovskite thin films by bromide incorporation,” J. Alloys Compd. 746, 391–398 (2018).
[Crossref]

L. Yuan, Z. Wang, R. Duan, P. Huang, K. Zhang, Q. Chen, N. K. Allam, Y. Zhou, B. Song, and Y. Li, “Semi-transparent perovskite solar cells: Unveiling the trade-off between transparency and efficiency,” J. Mater. Chem. A 6(40), 19696–19702 (2018).
[Crossref]

P. Luo, Y. Zhou, W. Xia, S. Zhou, J. Liu, Y. Lu, C. Xu, and L. Sun, “Colorful, bandgap-tunable, and air-stable CsPb(IxBr1-x)3 inorganic perovskite films via a novel sequential chemical vapor deposition,” Ceram. Int. 44(11), 12783–12788 (2018).
[Crossref]

H. Chen, X. Ding, X. Pan, T. Hayat, A. Alsaedi, Y. Ding, and S. Dai, “Comprehensive studies of air-brush spray deposition used in fabricating high-efficiency CH3NH3PbI3 perovskite solar cells: Combining theories with practices,” J. Power Sources 402, 82–90 (2018).
[Crossref]

T. M. Koh, V. Shanmugam, X. Guo, S. S. Lim, O. Filonik, E. M. Herzig, P. Müller-Buschbaum, V. Swamy, S. T. Chien, S. G. Mhaisalkar, and N. Mathews, “Enhancing moisture tolerance in efficient hybrid 3D/2D perovskite photovoltaics,” J. Mater. Chem. A 6(5), 2122–2128 (2018).
[Crossref]

Y. Lin, Y. Bai, Y. Fang, Z. Chen, S. Yang, X. Zheng, S. Tang, Y. Liu, J. Zhao, and J. Huang, “Enhanced thermal stability in perovskite solar cells by assembling 2D/3D stacking structures,” J. Phys. Chem. Lett. 9(3), 654–658 (2018).
[Crossref]

M. Stolterfoht, C. M. Wolff, J. A. Márquez, S. Zhang, C. J. Hages, D. Rothhardt, S. Albrecht, P. L. Burn, P. Meredith, T. Unold, and D. Neher, “Visualization and suppression of interfacial recombination for high-efficiency large-area pin perovskite solar cells,” Nat. Energy 3(10), 847–854 (2018).
[Crossref]

2017 (10)

Z. Wang, Q. Lin, F. P. Chmiel, N. Sakai, L. M. Herz, and H. J. Snaith, “Efficient ambient-air-stable solar cells with 2D-3D heterostructured butylammonium-caesium-formamidinium lead halide perovskites,” Nat. Energy 2(9), 17135 (2017).
[Crossref]

J. P. Correa-Baena, W. Tress, K. Domanski, E. H. Anaraki, S. H. Turren-Cruz, B. Roose, P. P. Boix, M. Grätzel, M. Saliba, A. Abate, and A. Hagfeldt, “Identifying and suppressing interfacial recombination to achieve high open-circuit voltage in perovskite solar cells,” Energy Environ. Sci. 10(5), 1207–1212 (2017).
[Crossref]

Y. Lin, Y. Bai, Y. Fang, Q. Wang, Y. Deng, and J. Huang, “Suppressed ion migration in low-dimensional perovskites,” ACS Energy Lett. 2(7), 1571–1572 (2017).
[Crossref]

U. Mehmood, A. Al-Ahmed, M. Afzaal, F. A. Al-Sulaiman, and M. Daud, “Recent progress and remaining challenges in organometallic halides based perovskite solar cells,” Renewable Sustainable Energy Rev. 78, 1–14 (2017).
[Crossref]

Z. Fang and Z. Yi, “First principles study on mixed orthorhombic perovskite CH3NH3Pb(I1-xBrx)3,” Chem. Phys. Lett. 687, 19–22 (2017).
[Crossref]

M. Afzaal and H. M. Yates, “Growth patterns and properties of aerosol-assisted chemical vapor deposition of CH3NH3PbI3 films in a single step,” Surf. Coat. Technol. 321, 336–340 (2017).
[Crossref]

J. S. Shaikh, N. S. Shaikh, A. D. Sheikh, S. S. Mali, A. J. Kale, P. Kanjanaboos, C. K. Hong, J. H. Kim, and P. S. Patil, “Perovskite solar cells: In pursuit of efficiency and stability,” Mater. Des. 136, 54–80 (2017).
[Crossref]

B. El Cohen, M. Wierzbowska, and L. Etgar, “High efficiency quasi 2D lead bromide perovskite solar cells using various barrier molecules,,” Sustain. Energy Fuels 1(9), 1935–1943 (2017).
[Crossref]

B. El Cohen, M. Wierzbowska, and L. Etgar, “High efficiency and high open circuit voltage in quasi 2D perovskite based solar cells,” Adv. Funct. Mater. 27(5), 1604733 (2017).
[Crossref]

G. Chai, S. Luo, H. Zhou, and W. A. Daoud, “CH3NH3PbI3-xBrx perovskite solar cells via spray assisted two-step deposition: Impact of bromide on stability and cell performance,” Mater. Des. 125, 222–229 (2017).
[Crossref]

2016 (10)

L. Atourki, E. Vega, B. Marí, M. Mollar, H. Ait Ahsaine, K. Bouabid, and A. Ihlal, “Role of the chemical substitution on the structural and luminescence properties of the mixed halide perovskite thin MAPbI3-x Brx (0 ≤ x ≤ 1) films,” Appl. Surf. Sci. 371, 112–117 (2016).
[Crossref]

D. Bae, A. Palmstrom, K. Roelofs, B. Mei, I. Chorkendorff, S. F. Bent, and P. C. K. Vesborg, “Tailoring Mixed-Halide, Wide-Gap Perovskites via Multistep Conversion Process,” ACS Appl. Mater. Interfaces 8(23), 14301–14306 (2016).
[Crossref]

T. Zhao, C. C. Chueh, Q. Chen, A. Rajagopal, and A. K. Y. Jen, “Defect Passivation of Organic-Inorganic Hybrid Perovskites by Diammonium Iodide toward High-Performance Photovoltaic Devices,” ACS Energy Lett. 1(4), 757–763 (2016).
[Crossref]

D. Cui, Z. Yang, D. Yang, X. Ren, Y. Liu, Q. Wei, H. Fan, J. Zeng, and S. Liu, “Color-tuned perovskite films prepared for efficient solar cell applications,” J. Phys. Chem. C 120(1), 42–47 (2016).
[Crossref]

S. A. Veldhuis, P. P. Boix, N. Yantara, M. Li, T. C. Sum, N. Mathews, and S. G. Mhaisalkar, “Perovskite materials for light-emitting diodes and lasers,” Adv. Mater. 28(32), 6804–6834 (2016).
[Crossref]

S. Pramchu, A. P. Jaroenjittichai, and Y. Laosiritaworn, “Surface doping of Sn in orthorhombic CH3NH3PbI3 for potential perovskite solar cells: first principles study,” Surf. Coat. Technol. 306, 285–289 (2016).
[Crossref]

J. H. Heo, M. H. Lee, M. H. Jang, and S. H. Im, “Highly efficient CH3NH3PbI3-xClx mixed halide perovskite solar cells prepared by re-dissolution and crystal grain growth via spray coating,” J. Mater. Chem. A 4(45), 17636–17642 (2016).
[Crossref]

L. N. Quan, M. Yuan, R. Comin, O. Voznyy, E. M. Beauregard, S. Hoogland, A. Buin, A. R. Kirmani, K. Zhao, A. Amassian, D. H. Kim, and E. H. Sargent, “Ligand-stabilized reduced-dimensionality perovskites,” J. Am. Chem. Soc. 138(8), 2649–2655 (2016).
[Crossref]

T. M. Koh, V. Shanmugam, J. Schlipf, L. Oesinghaus, P. Müller-Buschbaum, N. Ramakrishnan, V. Swamy, N. Mathews, P. P. Boix, and S. G. Mhaisalkar, “Nanostructuring mixed-dimensional perovskites: a route toward tunable, efficient photovoltaics,” Adv. Mater. 28(19), 3653–3661 (2016).
[Crossref]

C. Ma, C. Leng, Y. Ji, X. Wei, K. Sun, L. Tang, J. Yang, W. Luo, C. Li, Y. Deng, S. Feng, J. Shen, S. Lu, C. Du, and H. Shi, “2D/3D perovskite hybrids as moisture-tolerant and efficient light absorbers for solar cells,” Nanoscale 8(43), 18309–18314 (2016).
[Crossref]

2015 (6)

F. Li, C. Bao, H. Gao, W. Zhu, T. Yu, J. Yang, G. Fu, X. Zhou, and Z. Zou, “A facile spray-assisted fabrication of homogenous flat CH3NH3PbI3 films for high performance mesostructure perovskite solar cells,” Mater. Lett. 157, 38–41 (2015).
[Crossref]

M. Ramesh, K. M. Boopathi, T. Y. Huang, Y. C. Huang, C. S. Tsao, and C. W. Chu, “Using an airbrush pen for layer-by-layer growth of continuous perovskite thin films for hybrid solar cells,” ACS Appl. Mater. Interfaces 7(4), 2359–2366 (2015).
[Crossref]

H. S. Jung and N. G. Park, “Perovskite solar cells: From materials to devices,” Small 11(1), 10–25 (2015).
[Crossref]

P. P. Boix, S. Agarwala, T. M. Koh, N. Mathews, and S. G. Mhaisalkar, “Perovskite solar cells: Beyond methylammonium lead iodide,” J. Phys. Chem. Lett. 6(5), 898–907 (2015).
[Crossref]

D. H. Cao, C. C. Stoumpos, O. K. Farha, J. T. Hupp, and M. G. Kanatzidis, “2D homologous perovskites as light-absorbing materials for solar cell applications,” J. Am. Chem. Soc. 137(24), 7843–7850 (2015).
[Crossref]

Z. Liang, S. Zhang, X. Xu, N. Wang, J. Wang, X. Wang, Z. Bi, G. Xu, N. Yuan, and J. Ding, “A large grain size perovskite thin film with a dense structure for planar heterojunction solar cells via spray deposition under ambient conditions,” RSC Adv. 5(74), 60562–60569 (2015).
[Crossref]

2014 (3)

A. Buin, P. Pietsch, J. Xu, O. Voznyy, A. H. Ip, R. Comin, and E. H. Sargent, “Materials processing routes to trap-free halide perovskites,” Nano Lett. 14(11), 6281–6286 (2014).
[Crossref]

I. C. Smith, E. T. Hoke, D. Solis-Ibarra, M. D. McGehee, and H. I. Karunadasa, “A layered hybrid perovskite solar-cell absorber with enhanced moisture stability,” Angew. Chem. Int. Ed. 53(42), 11232–11235 (2014).
[Crossref]

Y. Zhao, A. M. Nardes, and K. Zhu, “Mesoporous perovskite solar cells: Material composition, charge-carrier dynamics, and device characteristics,” Faraday Discuss. 176, 301–312 (2014).
[Crossref]

Abate, A.

J. P. Correa-Baena, W. Tress, K. Domanski, E. H. Anaraki, S. H. Turren-Cruz, B. Roose, P. P. Boix, M. Grätzel, M. Saliba, A. Abate, and A. Hagfeldt, “Identifying and suppressing interfacial recombination to achieve high open-circuit voltage in perovskite solar cells,” Energy Environ. Sci. 10(5), 1207–1212 (2017).
[Crossref]

Abdollahi Nejand, B.

S. Gharibzadeh, B. Abdollahi Nejand, M. Jakoby, T. Abzieher, D. Hauschild, S. Moghadamzadeh, J. A. Schwenzer, P. Brenner, R. Schmager, A. A. Haghighirad, L. Weinhardt, U. Lemmer, B. S. Richards, I. A. Howard, and U. W. Paetzold, “Record open-circuit voltage wide-bandgap perovskite solar cells utilizing 2D/3D Perovskite Heterostructure,” Adv. Energy Mater. 9(21), 1803699 (2019).
[Crossref]

Abzieher, T.

S. Gharibzadeh, B. Abdollahi Nejand, M. Jakoby, T. Abzieher, D. Hauschild, S. Moghadamzadeh, J. A. Schwenzer, P. Brenner, R. Schmager, A. A. Haghighirad, L. Weinhardt, U. Lemmer, B. S. Richards, I. A. Howard, and U. W. Paetzold, “Record open-circuit voltage wide-bandgap perovskite solar cells utilizing 2D/3D Perovskite Heterostructure,” Adv. Energy Mater. 9(21), 1803699 (2019).
[Crossref]

Afzaal, M.

M. Afzaal and H. M. Yates, “Growth patterns and properties of aerosol-assisted chemical vapor deposition of CH3NH3PbI3 films in a single step,” Surf. Coat. Technol. 321, 336–340 (2017).
[Crossref]

U. Mehmood, A. Al-Ahmed, M. Afzaal, F. A. Al-Sulaiman, and M. Daud, “Recent progress and remaining challenges in organometallic halides based perovskite solar cells,” Renewable Sustainable Energy Rev. 78, 1–14 (2017).
[Crossref]

Agarwala, S.

P. P. Boix, S. Agarwala, T. M. Koh, N. Mathews, and S. G. Mhaisalkar, “Perovskite solar cells: Beyond methylammonium lead iodide,” J. Phys. Chem. Lett. 6(5), 898–907 (2015).
[Crossref]

Ait Ahsaine, H.

L. Atourki, E. Vega, B. Marí, M. Mollar, H. Ait Ahsaine, K. Bouabid, and A. Ihlal, “Role of the chemical substitution on the structural and luminescence properties of the mixed halide perovskite thin MAPbI3-x Brx (0 ≤ x ≤ 1) films,” Appl. Surf. Sci. 371, 112–117 (2016).
[Crossref]

Al-Ahmed, A.

U. Mehmood, A. Al-Ahmed, M. Afzaal, F. A. Al-Sulaiman, and M. Daud, “Recent progress and remaining challenges in organometallic halides based perovskite solar cells,” Renewable Sustainable Energy Rev. 78, 1–14 (2017).
[Crossref]

Albrecht, S.

M. Stolterfoht, C. M. Wolff, J. A. Márquez, S. Zhang, C. J. Hages, D. Rothhardt, S. Albrecht, P. L. Burn, P. Meredith, T. Unold, and D. Neher, “Visualization and suppression of interfacial recombination for high-efficiency large-area pin perovskite solar cells,” Nat. Energy 3(10), 847–854 (2018).
[Crossref]

Allam, N. K.

L. Yuan, Z. Wang, R. Duan, P. Huang, K. Zhang, Q. Chen, N. K. Allam, Y. Zhou, B. Song, and Y. Li, “Semi-transparent perovskite solar cells: Unveiling the trade-off between transparency and efficiency,” J. Mater. Chem. A 6(40), 19696–19702 (2018).
[Crossref]

Alsaedi, A.

H. Chen, X. Ding, X. Pan, T. Hayat, A. Alsaedi, Y. Ding, and S. Dai, “Comprehensive studies of air-brush spray deposition used in fabricating high-efficiency CH3NH3PbI3 perovskite solar cells: Combining theories with practices,” J. Power Sources 402, 82–90 (2018).
[Crossref]

Al-Sulaiman, F. A.

U. Mehmood, A. Al-Ahmed, M. Afzaal, F. A. Al-Sulaiman, and M. Daud, “Recent progress and remaining challenges in organometallic halides based perovskite solar cells,” Renewable Sustainable Energy Rev. 78, 1–14 (2017).
[Crossref]

Amassian, A.

L. N. Quan, M. Yuan, R. Comin, O. Voznyy, E. M. Beauregard, S. Hoogland, A. Buin, A. R. Kirmani, K. Zhao, A. Amassian, D. H. Kim, and E. H. Sargent, “Ligand-stabilized reduced-dimensionality perovskites,” J. Am. Chem. Soc. 138(8), 2649–2655 (2016).
[Crossref]

Anaraki, E. H.

J. P. Correa-Baena, W. Tress, K. Domanski, E. H. Anaraki, S. H. Turren-Cruz, B. Roose, P. P. Boix, M. Grätzel, M. Saliba, A. Abate, and A. Hagfeldt, “Identifying and suppressing interfacial recombination to achieve high open-circuit voltage in perovskite solar cells,” Energy Environ. Sci. 10(5), 1207–1212 (2017).
[Crossref]

Andersson, G.

M. A. Mahmud, T. Duong, Y. Yin, H. T. Pham, D. Walter, J. Peng, Y. Wu, L. Li, H. Shen, N. Wu, N. Mozaffari, G. Andersson, K. R. Catchpole, K. J. Weber, and T. P. White, “Double-sided surface passivation of 3D perovskite film for high-efficiency mixed-dimensional perovskite solar cells,” Adv. Funct. Mater. 30(7), 1907962 (2020).
[Crossref]

Atourki, L.

M. Ouafi, B. Jaber, L. Atourki, R. Bekkari, and L. Laânab, “Improving UV stability of MAPbI3 perovskite thin films by bromide incorporation,” J. Alloys Compd. 746, 391–398 (2018).
[Crossref]

L. Atourki, E. Vega, B. Marí, M. Mollar, H. Ait Ahsaine, K. Bouabid, and A. Ihlal, “Role of the chemical substitution on the structural and luminescence properties of the mixed halide perovskite thin MAPbI3-x Brx (0 ≤ x ≤ 1) films,” Appl. Surf. Sci. 371, 112–117 (2016).
[Crossref]

Bae, D.

D. Bae, A. Palmstrom, K. Roelofs, B. Mei, I. Chorkendorff, S. F. Bent, and P. C. K. Vesborg, “Tailoring Mixed-Halide, Wide-Gap Perovskites via Multistep Conversion Process,” ACS Appl. Mater. Interfaces 8(23), 14301–14306 (2016).
[Crossref]

Bai, H.

Bai, Y.

Y. Lin, Y. Bai, Y. Fang, Z. Chen, S. Yang, X. Zheng, S. Tang, Y. Liu, J. Zhao, and J. Huang, “Enhanced thermal stability in perovskite solar cells by assembling 2D/3D stacking structures,” J. Phys. Chem. Lett. 9(3), 654–658 (2018).
[Crossref]

Y. Lin, Y. Bai, Y. Fang, Q. Wang, Y. Deng, and J. Huang, “Suppressed ion migration in low-dimensional perovskites,” ACS Energy Lett. 2(7), 1571–1572 (2017).
[Crossref]

Bao, C.

F. Li, C. Bao, H. Gao, W. Zhu, T. Yu, J. Yang, G. Fu, X. Zhou, and Z. Zou, “A facile spray-assisted fabrication of homogenous flat CH3NH3PbI3 films for high performance mesostructure perovskite solar cells,” Mater. Lett. 157, 38–41 (2015).
[Crossref]

Beard, M. C.

F. Zhang, H. Lu, J. Tong, J. J. Berry, M. C. Beard, and K. Zhu, “Advances in two-dimensional organic–inorganic hybrid perovskites,” Energy Environ. Sci. 13(4), 1154–1186 (2020).
[Crossref]

Beauregard, E. M.

L. N. Quan, M. Yuan, R. Comin, O. Voznyy, E. M. Beauregard, S. Hoogland, A. Buin, A. R. Kirmani, K. Zhao, A. Amassian, D. H. Kim, and E. H. Sargent, “Ligand-stabilized reduced-dimensionality perovskites,” J. Am. Chem. Soc. 138(8), 2649–2655 (2016).
[Crossref]

Bekkari, R.

M. Ouafi, B. Jaber, L. Atourki, R. Bekkari, and L. Laânab, “Improving UV stability of MAPbI3 perovskite thin films by bromide incorporation,” J. Alloys Compd. 746, 391–398 (2018).
[Crossref]

Bent, S. F.

D. Bae, A. Palmstrom, K. Roelofs, B. Mei, I. Chorkendorff, S. F. Bent, and P. C. K. Vesborg, “Tailoring Mixed-Halide, Wide-Gap Perovskites via Multistep Conversion Process,” ACS Appl. Mater. Interfaces 8(23), 14301–14306 (2016).
[Crossref]

Berry, J. J.

F. Zhang, H. Lu, J. Tong, J. J. Berry, M. C. Beard, and K. Zhu, “Advances in two-dimensional organic–inorganic hybrid perovskites,” Energy Environ. Sci. 13(4), 1154–1186 (2020).
[Crossref]

Bi, Z.

Z. Liang, S. Zhang, X. Xu, N. Wang, J. Wang, X. Wang, Z. Bi, G. Xu, N. Yuan, and J. Ding, “A large grain size perovskite thin film with a dense structure for planar heterojunction solar cells via spray deposition under ambient conditions,” RSC Adv. 5(74), 60562–60569 (2015).
[Crossref]

Boix, P. P.

J. P. Correa-Baena, W. Tress, K. Domanski, E. H. Anaraki, S. H. Turren-Cruz, B. Roose, P. P. Boix, M. Grätzel, M. Saliba, A. Abate, and A. Hagfeldt, “Identifying and suppressing interfacial recombination to achieve high open-circuit voltage in perovskite solar cells,” Energy Environ. Sci. 10(5), 1207–1212 (2017).
[Crossref]

T. M. Koh, V. Shanmugam, J. Schlipf, L. Oesinghaus, P. Müller-Buschbaum, N. Ramakrishnan, V. Swamy, N. Mathews, P. P. Boix, and S. G. Mhaisalkar, “Nanostructuring mixed-dimensional perovskites: a route toward tunable, efficient photovoltaics,” Adv. Mater. 28(19), 3653–3661 (2016).
[Crossref]

S. A. Veldhuis, P. P. Boix, N. Yantara, M. Li, T. C. Sum, N. Mathews, and S. G. Mhaisalkar, “Perovskite materials for light-emitting diodes and lasers,” Adv. Mater. 28(32), 6804–6834 (2016).
[Crossref]

P. P. Boix, S. Agarwala, T. M. Koh, N. Mathews, and S. G. Mhaisalkar, “Perovskite solar cells: Beyond methylammonium lead iodide,” J. Phys. Chem. Lett. 6(5), 898–907 (2015).
[Crossref]

Boonthum, C.

K. Pinsuwan, C. Boonthum, T. Supasai, S. Sahasithiwat, P. Kumnorkaew, and P. Kanjanaboos, “Solar perovskite thin films with enhanced mechanical, thermal, UV, and moisture stability via vacuum-assisted deposition,” J. Mater. Sci. 55(8), 3484–3494 (2020).
[Crossref]

J. Ponchai, P. Kaewurai, C. Boonthum, K. Pinsuwan, T. Supasai, S. Sahasithiwat, and P. Kanjanaboos, “Modifying morphology and defects of low-dimensional, semi-transparent perovskite thin films: Via solvent type,” RSC Adv. 9(21), 12047–12054 (2019).
[Crossref]

Boopathi, K. M.

M. Ramesh, K. M. Boopathi, T. Y. Huang, Y. C. Huang, C. S. Tsao, and C. W. Chu, “Using an airbrush pen for layer-by-layer growth of continuous perovskite thin films for hybrid solar cells,” ACS Appl. Mater. Interfaces 7(4), 2359–2366 (2015).
[Crossref]

Bouabid, K.

L. Atourki, E. Vega, B. Marí, M. Mollar, H. Ait Ahsaine, K. Bouabid, and A. Ihlal, “Role of the chemical substitution on the structural and luminescence properties of the mixed halide perovskite thin MAPbI3-x Brx (0 ≤ x ≤ 1) films,” Appl. Surf. Sci. 371, 112–117 (2016).
[Crossref]

Brenner, P.

S. Gharibzadeh, B. Abdollahi Nejand, M. Jakoby, T. Abzieher, D. Hauschild, S. Moghadamzadeh, J. A. Schwenzer, P. Brenner, R. Schmager, A. A. Haghighirad, L. Weinhardt, U. Lemmer, B. S. Richards, I. A. Howard, and U. W. Paetzold, “Record open-circuit voltage wide-bandgap perovskite solar cells utilizing 2D/3D Perovskite Heterostructure,” Adv. Energy Mater. 9(21), 1803699 (2019).
[Crossref]

Buin, A.

L. N. Quan, M. Yuan, R. Comin, O. Voznyy, E. M. Beauregard, S. Hoogland, A. Buin, A. R. Kirmani, K. Zhao, A. Amassian, D. H. Kim, and E. H. Sargent, “Ligand-stabilized reduced-dimensionality perovskites,” J. Am. Chem. Soc. 138(8), 2649–2655 (2016).
[Crossref]

A. Buin, P. Pietsch, J. Xu, O. Voznyy, A. H. Ip, R. Comin, and E. H. Sargent, “Materials processing routes to trap-free halide perovskites,” Nano Lett. 14(11), 6281–6286 (2014).
[Crossref]

Burn, P. L.

M. Stolterfoht, C. M. Wolff, J. A. Márquez, S. Zhang, C. J. Hages, D. Rothhardt, S. Albrecht, P. L. Burn, P. Meredith, T. Unold, and D. Neher, “Visualization and suppression of interfacial recombination for high-efficiency large-area pin perovskite solar cells,” Nat. Energy 3(10), 847–854 (2018).
[Crossref]

Cao, D. H.

D. H. Cao, C. C. Stoumpos, O. K. Farha, J. T. Hupp, and M. G. Kanatzidis, “2D homologous perovskites as light-absorbing materials for solar cell applications,” J. Am. Chem. Soc. 137(24), 7843–7850 (2015).
[Crossref]

Catchpole, K. R.

M. A. Mahmud, T. Duong, Y. Yin, H. T. Pham, D. Walter, J. Peng, Y. Wu, L. Li, H. Shen, N. Wu, N. Mozaffari, G. Andersson, K. R. Catchpole, K. J. Weber, and T. P. White, “Double-sided surface passivation of 3D perovskite film for high-efficiency mixed-dimensional perovskite solar cells,” Adv. Funct. Mater. 30(7), 1907962 (2020).
[Crossref]

Chai, G.

G. Chai, S. Luo, H. Zhou, and W. A. Daoud, “CH3NH3PbI3-xBrx perovskite solar cells via spray assisted two-step deposition: Impact of bromide on stability and cell performance,” Mater. Des. 125, 222–229 (2017).
[Crossref]

Chen, H.

H. Zheng, D. Liu, Y. Wang, Y. Yang, H. Li, T. Zhang, H. Chen, L. Ji, Z. Chen, and S. Li, “Synergistic effect of additives on 2D perovskite film towards efficient and stable solar cell,” Chem. Eng. J. 389, 124266 (2020).
[Crossref]

H. Chen, X. Ding, X. Pan, T. Hayat, A. Alsaedi, Y. Ding, and S. Dai, “Comprehensive studies of air-brush spray deposition used in fabricating high-efficiency CH3NH3PbI3 perovskite solar cells: Combining theories with practices,” J. Power Sources 402, 82–90 (2018).
[Crossref]

Chen, J.

J. Chen, J. Y. Seo, and N. G. Park, “Simultaneous improvement of photovoltaic performance and stability by in situ formation of 2D perovskite at (FAPbI3)0.88(CsPbBr3)0.12/CuSCN interface,” Adv. Energy Mater. 8(12), 1702714 (2018).
[Crossref]

Chen, Q.

L. Yuan, Z. Wang, R. Duan, P. Huang, K. Zhang, Q. Chen, N. K. Allam, Y. Zhou, B. Song, and Y. Li, “Semi-transparent perovskite solar cells: Unveiling the trade-off between transparency and efficiency,” J. Mater. Chem. A 6(40), 19696–19702 (2018).
[Crossref]

T. Zhao, C. C. Chueh, Q. Chen, A. Rajagopal, and A. K. Y. Jen, “Defect Passivation of Organic-Inorganic Hybrid Perovskites by Diammonium Iodide toward High-Performance Photovoltaic Devices,” ACS Energy Lett. 1(4), 757–763 (2016).
[Crossref]

Chen, Z.

H. Zheng, D. Liu, Y. Wang, Y. Yang, H. Li, T. Zhang, H. Chen, L. Ji, Z. Chen, and S. Li, “Synergistic effect of additives on 2D perovskite film towards efficient and stable solar cell,” Chem. Eng. J. 389, 124266 (2020).
[Crossref]

Y. Lin, Y. Bai, Y. Fang, Z. Chen, S. Yang, X. Zheng, S. Tang, Y. Liu, J. Zhao, and J. Huang, “Enhanced thermal stability in perovskite solar cells by assembling 2D/3D stacking structures,” J. Phys. Chem. Lett. 9(3), 654–658 (2018).
[Crossref]

Chien, S. T.

T. M. Koh, V. Shanmugam, X. Guo, S. S. Lim, O. Filonik, E. M. Herzig, P. Müller-Buschbaum, V. Swamy, S. T. Chien, S. G. Mhaisalkar, and N. Mathews, “Enhancing moisture tolerance in efficient hybrid 3D/2D perovskite photovoltaics,” J. Mater. Chem. A 6(5), 2122–2128 (2018).
[Crossref]

Chmiel, F. P.

Z. Wang, Q. Lin, F. P. Chmiel, N. Sakai, L. M. Herz, and H. J. Snaith, “Efficient ambient-air-stable solar cells with 2D-3D heterostructured butylammonium-caesium-formamidinium lead halide perovskites,” Nat. Energy 2(9), 17135 (2017).
[Crossref]

Choi, C. H.

J. W. Lim, H. Wang, C. H. Choi, H. Kwon, L. N. Quan, W. T. Park, Y. Y. Noh, and D. H. Kim, “Self-powered reduced-dimensionality perovskite photodiodes with controlled crystalline phase and improved stability,” Nano Energy 57, 761–770 (2019).
[Crossref]

Chorkendorff, I.

D. Bae, A. Palmstrom, K. Roelofs, B. Mei, I. Chorkendorff, S. F. Bent, and P. C. K. Vesborg, “Tailoring Mixed-Halide, Wide-Gap Perovskites via Multistep Conversion Process,” ACS Appl. Mater. Interfaces 8(23), 14301–14306 (2016).
[Crossref]

Chu, C. W.

M. Ramesh, K. M. Boopathi, T. Y. Huang, Y. C. Huang, C. S. Tsao, and C. W. Chu, “Using an airbrush pen for layer-by-layer growth of continuous perovskite thin films for hybrid solar cells,” ACS Appl. Mater. Interfaces 7(4), 2359–2366 (2015).
[Crossref]

Chueh, C. C.

T. Zhao, C. C. Chueh, Q. Chen, A. Rajagopal, and A. K. Y. Jen, “Defect Passivation of Organic-Inorganic Hybrid Perovskites by Diammonium Iodide toward High-Performance Photovoltaic Devices,” ACS Energy Lett. 1(4), 757–763 (2016).
[Crossref]

Comin, R.

L. N. Quan, M. Yuan, R. Comin, O. Voznyy, E. M. Beauregard, S. Hoogland, A. Buin, A. R. Kirmani, K. Zhao, A. Amassian, D. H. Kim, and E. H. Sargent, “Ligand-stabilized reduced-dimensionality perovskites,” J. Am. Chem. Soc. 138(8), 2649–2655 (2016).
[Crossref]

A. Buin, P. Pietsch, J. Xu, O. Voznyy, A. H. Ip, R. Comin, and E. H. Sargent, “Materials processing routes to trap-free halide perovskites,” Nano Lett. 14(11), 6281–6286 (2014).
[Crossref]

Correa-Baena, J. P.

J. P. Correa-Baena, W. Tress, K. Domanski, E. H. Anaraki, S. H. Turren-Cruz, B. Roose, P. P. Boix, M. Grätzel, M. Saliba, A. Abate, and A. Hagfeldt, “Identifying and suppressing interfacial recombination to achieve high open-circuit voltage in perovskite solar cells,” Energy Environ. Sci. 10(5), 1207–1212 (2017).
[Crossref]

Cui, D.

D. Cui, Z. Yang, D. Yang, X. Ren, Y. Liu, Q. Wei, H. Fan, J. Zeng, and S. Liu, “Color-tuned perovskite films prepared for efficient solar cell applications,” J. Phys. Chem. C 120(1), 42–47 (2016).
[Crossref]

Dai, S.

H. Chen, X. Ding, X. Pan, T. Hayat, A. Alsaedi, Y. Ding, and S. Dai, “Comprehensive studies of air-brush spray deposition used in fabricating high-efficiency CH3NH3PbI3 perovskite solar cells: Combining theories with practices,” J. Power Sources 402, 82–90 (2018).
[Crossref]

Daoud, W. A.

G. Chai, S. Luo, H. Zhou, and W. A. Daoud, “CH3NH3PbI3-xBrx perovskite solar cells via spray assisted two-step deposition: Impact of bromide on stability and cell performance,” Mater. Des. 125, 222–229 (2017).
[Crossref]

Daud, M.

U. Mehmood, A. Al-Ahmed, M. Afzaal, F. A. Al-Sulaiman, and M. Daud, “Recent progress and remaining challenges in organometallic halides based perovskite solar cells,” Renewable Sustainable Energy Rev. 78, 1–14 (2017).
[Crossref]

Deng, Y.

Y. Lin, Y. Bai, Y. Fang, Q. Wang, Y. Deng, and J. Huang, “Suppressed ion migration in low-dimensional perovskites,” ACS Energy Lett. 2(7), 1571–1572 (2017).
[Crossref]

C. Ma, C. Leng, Y. Ji, X. Wei, K. Sun, L. Tang, J. Yang, W. Luo, C. Li, Y. Deng, S. Feng, J. Shen, S. Lu, C. Du, and H. Shi, “2D/3D perovskite hybrids as moisture-tolerant and efficient light absorbers for solar cells,” Nanoscale 8(43), 18309–18314 (2016).
[Crossref]

Ding, J.

Z. Liang, S. Zhang, X. Xu, N. Wang, J. Wang, X. Wang, Z. Bi, G. Xu, N. Yuan, and J. Ding, “A large grain size perovskite thin film with a dense structure for planar heterojunction solar cells via spray deposition under ambient conditions,” RSC Adv. 5(74), 60562–60569 (2015).
[Crossref]

Ding, X.

H. Chen, X. Ding, X. Pan, T. Hayat, A. Alsaedi, Y. Ding, and S. Dai, “Comprehensive studies of air-brush spray deposition used in fabricating high-efficiency CH3NH3PbI3 perovskite solar cells: Combining theories with practices,” J. Power Sources 402, 82–90 (2018).
[Crossref]

Ding, Y.

H. Chen, X. Ding, X. Pan, T. Hayat, A. Alsaedi, Y. Ding, and S. Dai, “Comprehensive studies of air-brush spray deposition used in fabricating high-efficiency CH3NH3PbI3 perovskite solar cells: Combining theories with practices,” J. Power Sources 402, 82–90 (2018).
[Crossref]

Domanski, K.

J. P. Correa-Baena, W. Tress, K. Domanski, E. H. Anaraki, S. H. Turren-Cruz, B. Roose, P. P. Boix, M. Grätzel, M. Saliba, A. Abate, and A. Hagfeldt, “Identifying and suppressing interfacial recombination to achieve high open-circuit voltage in perovskite solar cells,” Energy Environ. Sci. 10(5), 1207–1212 (2017).
[Crossref]

Du, C.

C. Ma, C. Leng, Y. Ji, X. Wei, K. Sun, L. Tang, J. Yang, W. Luo, C. Li, Y. Deng, S. Feng, J. Shen, S. Lu, C. Du, and H. Shi, “2D/3D perovskite hybrids as moisture-tolerant and efficient light absorbers for solar cells,” Nanoscale 8(43), 18309–18314 (2016).
[Crossref]

Duan, R.

L. Yuan, Z. Wang, R. Duan, P. Huang, K. Zhang, Q. Chen, N. K. Allam, Y. Zhou, B. Song, and Y. Li, “Semi-transparent perovskite solar cells: Unveiling the trade-off between transparency and efficiency,” J. Mater. Chem. A 6(40), 19696–19702 (2018).
[Crossref]

Duong, T.

M. A. Mahmud, T. Duong, Y. Yin, H. T. Pham, D. Walter, J. Peng, Y. Wu, L. Li, H. Shen, N. Wu, N. Mozaffari, G. Andersson, K. R. Catchpole, K. J. Weber, and T. P. White, “Double-sided surface passivation of 3D perovskite film for high-efficiency mixed-dimensional perovskite solar cells,” Adv. Funct. Mater. 30(7), 1907962 (2020).
[Crossref]

El Cohen, B.

B. El Cohen, M. Wierzbowska, and L. Etgar, “High efficiency quasi 2D lead bromide perovskite solar cells using various barrier molecules,,” Sustain. Energy Fuels 1(9), 1935–1943 (2017).
[Crossref]

B. El Cohen, M. Wierzbowska, and L. Etgar, “High efficiency and high open circuit voltage in quasi 2D perovskite based solar cells,” Adv. Funct. Mater. 27(5), 1604733 (2017).
[Crossref]

Etgar, L.

B. El Cohen, M. Wierzbowska, and L. Etgar, “High efficiency and high open circuit voltage in quasi 2D perovskite based solar cells,” Adv. Funct. Mater. 27(5), 1604733 (2017).
[Crossref]

B. El Cohen, M. Wierzbowska, and L. Etgar, “High efficiency quasi 2D lead bromide perovskite solar cells using various barrier molecules,,” Sustain. Energy Fuels 1(9), 1935–1943 (2017).
[Crossref]

Fan, H.

D. Cui, Z. Yang, D. Yang, X. Ren, Y. Liu, Q. Wei, H. Fan, J. Zeng, and S. Liu, “Color-tuned perovskite films prepared for efficient solar cell applications,” J. Phys. Chem. C 120(1), 42–47 (2016).
[Crossref]

Fang, Y.

Y. Lin, Y. Bai, Y. Fang, Z. Chen, S. Yang, X. Zheng, S. Tang, Y. Liu, J. Zhao, and J. Huang, “Enhanced thermal stability in perovskite solar cells by assembling 2D/3D stacking structures,” J. Phys. Chem. Lett. 9(3), 654–658 (2018).
[Crossref]

Y. Lin, Y. Bai, Y. Fang, Q. Wang, Y. Deng, and J. Huang, “Suppressed ion migration in low-dimensional perovskites,” ACS Energy Lett. 2(7), 1571–1572 (2017).
[Crossref]

Fang, Z.

Z. Fang and Z. Yi, “First principles study on mixed orthorhombic perovskite CH3NH3Pb(I1-xBrx)3,” Chem. Phys. Lett. 687, 19–22 (2017).
[Crossref]

Farha, O. K.

D. H. Cao, C. C. Stoumpos, O. K. Farha, J. T. Hupp, and M. G. Kanatzidis, “2D homologous perovskites as light-absorbing materials for solar cell applications,” J. Am. Chem. Soc. 137(24), 7843–7850 (2015).
[Crossref]

Feng, S.

C. Ma, C. Leng, Y. Ji, X. Wei, K. Sun, L. Tang, J. Yang, W. Luo, C. Li, Y. Deng, S. Feng, J. Shen, S. Lu, C. Du, and H. Shi, “2D/3D perovskite hybrids as moisture-tolerant and efficient light absorbers for solar cells,” Nanoscale 8(43), 18309–18314 (2016).
[Crossref]

Feng, Y.

Y. Lv, Y. Shi, X. Song, J. Liu, M. Wang, S. Wang, Y. Feng, S. Jin, and C. Hao, “Bromine doping as an efficient strategy to reduce the interfacial defects in hybrid two-dimensional/three-dimensional stacking perovskite solar cells,” ACS Appl. Mater. Interfaces 10(37), 31755–31764 (2018).
[Crossref]

Filonik, O.

T. M. Koh, V. Shanmugam, X. Guo, S. S. Lim, O. Filonik, E. M. Herzig, P. Müller-Buschbaum, V. Swamy, S. T. Chien, S. G. Mhaisalkar, and N. Mathews, “Enhancing moisture tolerance in efficient hybrid 3D/2D perovskite photovoltaics,” J. Mater. Chem. A 6(5), 2122–2128 (2018).
[Crossref]

Fu, G.

F. Li, C. Bao, H. Gao, W. Zhu, T. Yu, J. Yang, G. Fu, X. Zhou, and Z. Zou, “A facile spray-assisted fabrication of homogenous flat CH3NH3PbI3 films for high performance mesostructure perovskite solar cells,” Mater. Lett. 157, 38–41 (2015).
[Crossref]

Fu, W.

W. Fu, J. Wang, L. Zuo, K. Gao, F. Liu, D. S. Ginger, and A. K.-Y. Jen, “Two-dimensional perovskite solar cells with 14.1% power conversion efficiency and 0.68% external radiative efficiency,” ACS Energy Lett. 3(9), 2086–2093 (2018).
[Crossref]

Gao, H.

F. Li, C. Bao, H. Gao, W. Zhu, T. Yu, J. Yang, G. Fu, X. Zhou, and Z. Zou, “A facile spray-assisted fabrication of homogenous flat CH3NH3PbI3 films for high performance mesostructure perovskite solar cells,” Mater. Lett. 157, 38–41 (2015).
[Crossref]

Gao, K.

W. Fu, J. Wang, L. Zuo, K. Gao, F. Liu, D. S. Ginger, and A. K.-Y. Jen, “Two-dimensional perovskite solar cells with 14.1% power conversion efficiency and 0.68% external radiative efficiency,” ACS Energy Lett. 3(9), 2086–2093 (2018).
[Crossref]

Gharibzadeh, S.

S. Gharibzadeh, B. Abdollahi Nejand, M. Jakoby, T. Abzieher, D. Hauschild, S. Moghadamzadeh, J. A. Schwenzer, P. Brenner, R. Schmager, A. A. Haghighirad, L. Weinhardt, U. Lemmer, B. S. Richards, I. A. Howard, and U. W. Paetzold, “Record open-circuit voltage wide-bandgap perovskite solar cells utilizing 2D/3D Perovskite Heterostructure,” Adv. Energy Mater. 9(21), 1803699 (2019).
[Crossref]

Ginger, D. S.

W. Fu, J. Wang, L. Zuo, K. Gao, F. Liu, D. S. Ginger, and A. K.-Y. Jen, “Two-dimensional perovskite solar cells with 14.1% power conversion efficiency and 0.68% external radiative efficiency,” ACS Energy Lett. 3(9), 2086–2093 (2018).
[Crossref]

Grätzel, M.

J. P. Correa-Baena, W. Tress, K. Domanski, E. H. Anaraki, S. H. Turren-Cruz, B. Roose, P. P. Boix, M. Grätzel, M. Saliba, A. Abate, and A. Hagfeldt, “Identifying and suppressing interfacial recombination to achieve high open-circuit voltage in perovskite solar cells,” Energy Environ. Sci. 10(5), 1207–1212 (2017).
[Crossref]

Guo, F.

Guo, R.

Guo, X.

T. M. Koh, V. Shanmugam, X. Guo, S. S. Lim, O. Filonik, E. M. Herzig, P. Müller-Buschbaum, V. Swamy, S. T. Chien, S. G. Mhaisalkar, and N. Mathews, “Enhancing moisture tolerance in efficient hybrid 3D/2D perovskite photovoltaics,” J. Mater. Chem. A 6(5), 2122–2128 (2018).
[Crossref]

Hages, C. J.

M. Stolterfoht, C. M. Wolff, J. A. Márquez, S. Zhang, C. J. Hages, D. Rothhardt, S. Albrecht, P. L. Burn, P. Meredith, T. Unold, and D. Neher, “Visualization and suppression of interfacial recombination for high-efficiency large-area pin perovskite solar cells,” Nat. Energy 3(10), 847–854 (2018).
[Crossref]

Hagfeldt, A.

J. P. Correa-Baena, W. Tress, K. Domanski, E. H. Anaraki, S. H. Turren-Cruz, B. Roose, P. P. Boix, M. Grätzel, M. Saliba, A. Abate, and A. Hagfeldt, “Identifying and suppressing interfacial recombination to achieve high open-circuit voltage in perovskite solar cells,” Energy Environ. Sci. 10(5), 1207–1212 (2017).
[Crossref]

Haghighirad, A. A.

S. Gharibzadeh, B. Abdollahi Nejand, M. Jakoby, T. Abzieher, D. Hauschild, S. Moghadamzadeh, J. A. Schwenzer, P. Brenner, R. Schmager, A. A. Haghighirad, L. Weinhardt, U. Lemmer, B. S. Richards, I. A. Howard, and U. W. Paetzold, “Record open-circuit voltage wide-bandgap perovskite solar cells utilizing 2D/3D Perovskite Heterostructure,” Adv. Energy Mater. 9(21), 1803699 (2019).
[Crossref]

Hao, C.

Y. Lv, Y. Shi, X. Song, J. Liu, M. Wang, S. Wang, Y. Feng, S. Jin, and C. Hao, “Bromine doping as an efficient strategy to reduce the interfacial defects in hybrid two-dimensional/three-dimensional stacking perovskite solar cells,” ACS Appl. Mater. Interfaces 10(37), 31755–31764 (2018).
[Crossref]

Hauschild, D.

S. Gharibzadeh, B. Abdollahi Nejand, M. Jakoby, T. Abzieher, D. Hauschild, S. Moghadamzadeh, J. A. Schwenzer, P. Brenner, R. Schmager, A. A. Haghighirad, L. Weinhardt, U. Lemmer, B. S. Richards, I. A. Howard, and U. W. Paetzold, “Record open-circuit voltage wide-bandgap perovskite solar cells utilizing 2D/3D Perovskite Heterostructure,” Adv. Energy Mater. 9(21), 1803699 (2019).
[Crossref]

Hayat, T.

H. Chen, X. Ding, X. Pan, T. Hayat, A. Alsaedi, Y. Ding, and S. Dai, “Comprehensive studies of air-brush spray deposition used in fabricating high-efficiency CH3NH3PbI3 perovskite solar cells: Combining theories with practices,” J. Power Sources 402, 82–90 (2018).
[Crossref]

Heo, J. H.

J. H. Heo, M. H. Lee, M. H. Jang, and S. H. Im, “Highly efficient CH3NH3PbI3-xClx mixed halide perovskite solar cells prepared by re-dissolution and crystal grain growth via spray coating,” J. Mater. Chem. A 4(45), 17636–17642 (2016).
[Crossref]

Herz, L. M.

Z. Wang, Q. Lin, F. P. Chmiel, N. Sakai, L. M. Herz, and H. J. Snaith, “Efficient ambient-air-stable solar cells with 2D-3D heterostructured butylammonium-caesium-formamidinium lead halide perovskites,” Nat. Energy 2(9), 17135 (2017).
[Crossref]

Herzig, E. M.

T. M. Koh, V. Shanmugam, X. Guo, S. S. Lim, O. Filonik, E. M. Herzig, P. Müller-Buschbaum, V. Swamy, S. T. Chien, S. G. Mhaisalkar, and N. Mathews, “Enhancing moisture tolerance in efficient hybrid 3D/2D perovskite photovoltaics,” J. Mater. Chem. A 6(5), 2122–2128 (2018).
[Crossref]

Hoke, E. T.

I. C. Smith, E. T. Hoke, D. Solis-Ibarra, M. D. McGehee, and H. I. Karunadasa, “A layered hybrid perovskite solar-cell absorber with enhanced moisture stability,” Angew. Chem. Int. Ed. 53(42), 11232–11235 (2014).
[Crossref]

Hong, C. K.

J. S. Shaikh, N. S. Shaikh, A. D. Sheikh, S. S. Mali, A. J. Kale, P. Kanjanaboos, C. K. Hong, J. H. Kim, and P. S. Patil, “Perovskite solar cells: In pursuit of efficiency and stability,” Mater. Des. 136, 54–80 (2017).
[Crossref]

Hong, Q. M.

Q. M. Hong, R. P. Xu, T. Y. Jin, J. X. Tang, and Y. Q. Li, “Unraveling the light-induced degradation mechanism of CH3NH3PbI3 perovskite films,” Org. Electron. 67, 19–25 (2019).
[Crossref]

Hoogland, S.

L. N. Quan, M. Yuan, R. Comin, O. Voznyy, E. M. Beauregard, S. Hoogland, A. Buin, A. R. Kirmani, K. Zhao, A. Amassian, D. H. Kim, and E. H. Sargent, “Ligand-stabilized reduced-dimensionality perovskites,” J. Am. Chem. Soc. 138(8), 2649–2655 (2016).
[Crossref]

Howard, I. A.

S. Gharibzadeh, B. Abdollahi Nejand, M. Jakoby, T. Abzieher, D. Hauschild, S. Moghadamzadeh, J. A. Schwenzer, P. Brenner, R. Schmager, A. A. Haghighirad, L. Weinhardt, U. Lemmer, B. S. Richards, I. A. Howard, and U. W. Paetzold, “Record open-circuit voltage wide-bandgap perovskite solar cells utilizing 2D/3D Perovskite Heterostructure,” Adv. Energy Mater. 9(21), 1803699 (2019).
[Crossref]

Huang, J.

Y. Lin, Y. Bai, Y. Fang, Z. Chen, S. Yang, X. Zheng, S. Tang, Y. Liu, J. Zhao, and J. Huang, “Enhanced thermal stability in perovskite solar cells by assembling 2D/3D stacking structures,” J. Phys. Chem. Lett. 9(3), 654–658 (2018).
[Crossref]

Y. Lin, Y. Bai, Y. Fang, Q. Wang, Y. Deng, and J. Huang, “Suppressed ion migration in low-dimensional perovskites,” ACS Energy Lett. 2(7), 1571–1572 (2017).
[Crossref]

Huang, P.

L. Yuan, Z. Wang, R. Duan, P. Huang, K. Zhang, Q. Chen, N. K. Allam, Y. Zhou, B. Song, and Y. Li, “Semi-transparent perovskite solar cells: Unveiling the trade-off between transparency and efficiency,” J. Mater. Chem. A 6(40), 19696–19702 (2018).
[Crossref]

Huang, T. Y.

M. Ramesh, K. M. Boopathi, T. Y. Huang, Y. C. Huang, C. S. Tsao, and C. W. Chu, “Using an airbrush pen for layer-by-layer growth of continuous perovskite thin films for hybrid solar cells,” ACS Appl. Mater. Interfaces 7(4), 2359–2366 (2015).
[Crossref]

Huang, Y.

Huang, Y. C.

M. Ramesh, K. M. Boopathi, T. Y. Huang, Y. C. Huang, C. S. Tsao, and C. W. Chu, “Using an airbrush pen for layer-by-layer growth of continuous perovskite thin films for hybrid solar cells,” ACS Appl. Mater. Interfaces 7(4), 2359–2366 (2015).
[Crossref]

Hunkao, R.

A. Naikaew, P. Kumnorkaew, T. Supasai, S. Suwanna, R. Hunkao, T. Srikhirin, and P. Kanjanaboos, “Enhancing high humidity stability of quasi-2D perovskite thin films through mixed cation doping and solvent engineering,” ChemNanoMat 5(10), 1280–1288 (2019).
[Crossref]

Hupp, J. T.

D. H. Cao, C. C. Stoumpos, O. K. Farha, J. T. Hupp, and M. G. Kanatzidis, “2D homologous perovskites as light-absorbing materials for solar cell applications,” J. Am. Chem. Soc. 137(24), 7843–7850 (2015).
[Crossref]

Ihlal, A.

L. Atourki, E. Vega, B. Marí, M. Mollar, H. Ait Ahsaine, K. Bouabid, and A. Ihlal, “Role of the chemical substitution on the structural and luminescence properties of the mixed halide perovskite thin MAPbI3-x Brx (0 ≤ x ≤ 1) films,” Appl. Surf. Sci. 371, 112–117 (2016).
[Crossref]

Im, S. H.

J. H. Heo, M. H. Lee, M. H. Jang, and S. H. Im, “Highly efficient CH3NH3PbI3-xClx mixed halide perovskite solar cells prepared by re-dissolution and crystal grain growth via spray coating,” J. Mater. Chem. A 4(45), 17636–17642 (2016).
[Crossref]

Ip, A. H.

A. Buin, P. Pietsch, J. Xu, O. Voznyy, A. H. Ip, R. Comin, and E. H. Sargent, “Materials processing routes to trap-free halide perovskites,” Nano Lett. 14(11), 6281–6286 (2014).
[Crossref]

Jaber, B.

M. Ouafi, B. Jaber, L. Atourki, R. Bekkari, and L. Laânab, “Improving UV stability of MAPbI3 perovskite thin films by bromide incorporation,” J. Alloys Compd. 746, 391–398 (2018).
[Crossref]

Jakoby, M.

S. Gharibzadeh, B. Abdollahi Nejand, M. Jakoby, T. Abzieher, D. Hauschild, S. Moghadamzadeh, J. A. Schwenzer, P. Brenner, R. Schmager, A. A. Haghighirad, L. Weinhardt, U. Lemmer, B. S. Richards, I. A. Howard, and U. W. Paetzold, “Record open-circuit voltage wide-bandgap perovskite solar cells utilizing 2D/3D Perovskite Heterostructure,” Adv. Energy Mater. 9(21), 1803699 (2019).
[Crossref]

Jang, M. H.

J. H. Heo, M. H. Lee, M. H. Jang, and S. H. Im, “Highly efficient CH3NH3PbI3-xClx mixed halide perovskite solar cells prepared by re-dissolution and crystal grain growth via spray coating,” J. Mater. Chem. A 4(45), 17636–17642 (2016).
[Crossref]

Jaroenjittichai, A. P.

S. Pramchu, A. P. Jaroenjittichai, and Y. Laosiritaworn, “Surface doping of Sn in orthorhombic CH3NH3PbI3 for potential perovskite solar cells: first principles study,” Surf. Coat. Technol. 306, 285–289 (2016).
[Crossref]

Jen, A. K. Y.

T. Zhao, C. C. Chueh, Q. Chen, A. Rajagopal, and A. K. Y. Jen, “Defect Passivation of Organic-Inorganic Hybrid Perovskites by Diammonium Iodide toward High-Performance Photovoltaic Devices,” ACS Energy Lett. 1(4), 757–763 (2016).
[Crossref]

Jen, A. K.-Y.

W. Fu, J. Wang, L. Zuo, K. Gao, F. Liu, D. S. Ginger, and A. K.-Y. Jen, “Two-dimensional perovskite solar cells with 14.1% power conversion efficiency and 0.68% external radiative efficiency,” ACS Energy Lett. 3(9), 2086–2093 (2018).
[Crossref]

Ji, L.

H. Zheng, D. Liu, Y. Wang, Y. Yang, H. Li, T. Zhang, H. Chen, L. Ji, Z. Chen, and S. Li, “Synergistic effect of additives on 2D perovskite film towards efficient and stable solar cell,” Chem. Eng. J. 389, 124266 (2020).
[Crossref]

Ji, Y.

C. Ma, C. Leng, Y. Ji, X. Wei, K. Sun, L. Tang, J. Yang, W. Luo, C. Li, Y. Deng, S. Feng, J. Shen, S. Lu, C. Du, and H. Shi, “2D/3D perovskite hybrids as moisture-tolerant and efficient light absorbers for solar cells,” Nanoscale 8(43), 18309–18314 (2016).
[Crossref]

Jin, S.

Y. Lv, Y. Shi, X. Song, J. Liu, M. Wang, S. Wang, Y. Feng, S. Jin, and C. Hao, “Bromine doping as an efficient strategy to reduce the interfacial defects in hybrid two-dimensional/three-dimensional stacking perovskite solar cells,” ACS Appl. Mater. Interfaces 10(37), 31755–31764 (2018).
[Crossref]

Jin, T. Y.

Q. M. Hong, R. P. Xu, T. Y. Jin, J. X. Tang, and Y. Q. Li, “Unraveling the light-induced degradation mechanism of CH3NH3PbI3 perovskite films,” Org. Electron. 67, 19–25 (2019).
[Crossref]

Jung, H. S.

H. S. Jung and N. G. Park, “Perovskite solar cells: From materials to devices,” Small 11(1), 10–25 (2015).
[Crossref]

Kaewurai, P.

K. Z. Swe, A. Naikaew, P. Kaewurai, P. Pansa-Ngat, S. Sahasithiwat, L. Kangkaew, S. Rugmai, S. Soontaranon, and P. Kanjanaboos, “Layered perovskite with compact morphology and reduced grain size via vacuum assisted crystallization for luminescence applications,” Opt. Mater. Express 10(5), 1182 (2020).
[Crossref]

J. Ponchai, P. Kaewurai, C. Boonthum, K. Pinsuwan, T. Supasai, S. Sahasithiwat, and P. Kanjanaboos, “Modifying morphology and defects of low-dimensional, semi-transparent perovskite thin films: Via solvent type,” RSC Adv. 9(21), 12047–12054 (2019).
[Crossref]

Kale, A. J.

J. S. Shaikh, N. S. Shaikh, A. D. Sheikh, S. S. Mali, A. J. Kale, P. Kanjanaboos, C. K. Hong, J. H. Kim, and P. S. Patil, “Perovskite solar cells: In pursuit of efficiency and stability,” Mater. Des. 136, 54–80 (2017).
[Crossref]

Kanatzidis, M. G.

D. H. Cao, C. C. Stoumpos, O. K. Farha, J. T. Hupp, and M. G. Kanatzidis, “2D homologous perovskites as light-absorbing materials for solar cell applications,” J. Am. Chem. Soc. 137(24), 7843–7850 (2015).
[Crossref]

Kangkaew, L.

Kanjanaboos, P.

K. Z. Swe, A. Naikaew, P. Kaewurai, P. Pansa-Ngat, S. Sahasithiwat, L. Kangkaew, S. Rugmai, S. Soontaranon, and P. Kanjanaboos, “Layered perovskite with compact morphology and reduced grain size via vacuum assisted crystallization for luminescence applications,” Opt. Mater. Express 10(5), 1182 (2020).
[Crossref]

K. Pinsuwan, C. Boonthum, T. Supasai, S. Sahasithiwat, P. Kumnorkaew, and P. Kanjanaboos, “Solar perovskite thin films with enhanced mechanical, thermal, UV, and moisture stability via vacuum-assisted deposition,” J. Mater. Sci. 55(8), 3484–3494 (2020).
[Crossref]

A. Naikaew, P. Kumnorkaew, T. Supasai, S. Suwanna, R. Hunkao, T. Srikhirin, and P. Kanjanaboos, “Enhancing high humidity stability of quasi-2D perovskite thin films through mixed cation doping and solvent engineering,” ChemNanoMat 5(10), 1280–1288 (2019).
[Crossref]

J. Ponchai, P. Kaewurai, C. Boonthum, K. Pinsuwan, T. Supasai, S. Sahasithiwat, and P. Kanjanaboos, “Modifying morphology and defects of low-dimensional, semi-transparent perovskite thin films: Via solvent type,” RSC Adv. 9(21), 12047–12054 (2019).
[Crossref]

J. S. Shaikh, N. S. Shaikh, A. D. Sheikh, S. S. Mali, A. J. Kale, P. Kanjanaboos, C. K. Hong, J. H. Kim, and P. S. Patil, “Perovskite solar cells: In pursuit of efficiency and stability,” Mater. Des. 136, 54–80 (2017).
[Crossref]

Karunadasa, H. I.

I. C. Smith, E. T. Hoke, D. Solis-Ibarra, M. D. McGehee, and H. I. Karunadasa, “A layered hybrid perovskite solar-cell absorber with enhanced moisture stability,” Angew. Chem. Int. Ed. 53(42), 11232–11235 (2014).
[Crossref]

Kim, D. H.

J. W. Lim, H. Wang, C. H. Choi, H. Kwon, L. N. Quan, W. T. Park, Y. Y. Noh, and D. H. Kim, “Self-powered reduced-dimensionality perovskite photodiodes with controlled crystalline phase and improved stability,” Nano Energy 57, 761–770 (2019).
[Crossref]

L. N. Quan, M. Yuan, R. Comin, O. Voznyy, E. M. Beauregard, S. Hoogland, A. Buin, A. R. Kirmani, K. Zhao, A. Amassian, D. H. Kim, and E. H. Sargent, “Ligand-stabilized reduced-dimensionality perovskites,” J. Am. Chem. Soc. 138(8), 2649–2655 (2016).
[Crossref]

Kim, J. H.

J. S. Shaikh, N. S. Shaikh, A. D. Sheikh, S. S. Mali, A. J. Kale, P. Kanjanaboos, C. K. Hong, J. H. Kim, and P. S. Patil, “Perovskite solar cells: In pursuit of efficiency and stability,” Mater. Des. 136, 54–80 (2017).
[Crossref]

Kirmani, A. R.

L. N. Quan, M. Yuan, R. Comin, O. Voznyy, E. M. Beauregard, S. Hoogland, A. Buin, A. R. Kirmani, K. Zhao, A. Amassian, D. H. Kim, and E. H. Sargent, “Ligand-stabilized reduced-dimensionality perovskites,” J. Am. Chem. Soc. 138(8), 2649–2655 (2016).
[Crossref]

Koh, T. M.

T. M. Koh, V. Shanmugam, X. Guo, S. S. Lim, O. Filonik, E. M. Herzig, P. Müller-Buschbaum, V. Swamy, S. T. Chien, S. G. Mhaisalkar, and N. Mathews, “Enhancing moisture tolerance in efficient hybrid 3D/2D perovskite photovoltaics,” J. Mater. Chem. A 6(5), 2122–2128 (2018).
[Crossref]

T. M. Koh, V. Shanmugam, J. Schlipf, L. Oesinghaus, P. Müller-Buschbaum, N. Ramakrishnan, V. Swamy, N. Mathews, P. P. Boix, and S. G. Mhaisalkar, “Nanostructuring mixed-dimensional perovskites: a route toward tunable, efficient photovoltaics,” Adv. Mater. 28(19), 3653–3661 (2016).
[Crossref]

P. P. Boix, S. Agarwala, T. M. Koh, N. Mathews, and S. G. Mhaisalkar, “Perovskite solar cells: Beyond methylammonium lead iodide,” J. Phys. Chem. Lett. 6(5), 898–907 (2015).
[Crossref]

Kumnorkaew, P.

K. Pinsuwan, C. Boonthum, T. Supasai, S. Sahasithiwat, P. Kumnorkaew, and P. Kanjanaboos, “Solar perovskite thin films with enhanced mechanical, thermal, UV, and moisture stability via vacuum-assisted deposition,” J. Mater. Sci. 55(8), 3484–3494 (2020).
[Crossref]

A. Naikaew, P. Kumnorkaew, T. Supasai, S. Suwanna, R. Hunkao, T. Srikhirin, and P. Kanjanaboos, “Enhancing high humidity stability of quasi-2D perovskite thin films through mixed cation doping and solvent engineering,” ChemNanoMat 5(10), 1280–1288 (2019).
[Crossref]

Kwon, H.

J. W. Lim, H. Wang, C. H. Choi, H. Kwon, L. N. Quan, W. T. Park, Y. Y. Noh, and D. H. Kim, “Self-powered reduced-dimensionality perovskite photodiodes with controlled crystalline phase and improved stability,” Nano Energy 57, 761–770 (2019).
[Crossref]

Laânab, L.

M. Ouafi, B. Jaber, L. Atourki, R. Bekkari, and L. Laânab, “Improving UV stability of MAPbI3 perovskite thin films by bromide incorporation,” J. Alloys Compd. 746, 391–398 (2018).
[Crossref]

Laosiritaworn, Y.

S. Pramchu, A. P. Jaroenjittichai, and Y. Laosiritaworn, “Surface doping of Sn in orthorhombic CH3NH3PbI3 for potential perovskite solar cells: first principles study,” Surf. Coat. Technol. 306, 285–289 (2016).
[Crossref]

Lee, M. H.

J. H. Heo, M. H. Lee, M. H. Jang, and S. H. Im, “Highly efficient CH3NH3PbI3-xClx mixed halide perovskite solar cells prepared by re-dissolution and crystal grain growth via spray coating,” J. Mater. Chem. A 4(45), 17636–17642 (2016).
[Crossref]

Lemmer, U.

S. Gharibzadeh, B. Abdollahi Nejand, M. Jakoby, T. Abzieher, D. Hauschild, S. Moghadamzadeh, J. A. Schwenzer, P. Brenner, R. Schmager, A. A. Haghighirad, L. Weinhardt, U. Lemmer, B. S. Richards, I. A. Howard, and U. W. Paetzold, “Record open-circuit voltage wide-bandgap perovskite solar cells utilizing 2D/3D Perovskite Heterostructure,” Adv. Energy Mater. 9(21), 1803699 (2019).
[Crossref]

Leng, C.

C. Ma, C. Leng, Y. Ji, X. Wei, K. Sun, L. Tang, J. Yang, W. Luo, C. Li, Y. Deng, S. Feng, J. Shen, S. Lu, C. Du, and H. Shi, “2D/3D perovskite hybrids as moisture-tolerant and efficient light absorbers for solar cells,” Nanoscale 8(43), 18309–18314 (2016).
[Crossref]

Li, C.

C. Ma, C. Leng, Y. Ji, X. Wei, K. Sun, L. Tang, J. Yang, W. Luo, C. Li, Y. Deng, S. Feng, J. Shen, S. Lu, C. Du, and H. Shi, “2D/3D perovskite hybrids as moisture-tolerant and efficient light absorbers for solar cells,” Nanoscale 8(43), 18309–18314 (2016).
[Crossref]

Li, F.

F. Li, C. Bao, H. Gao, W. Zhu, T. Yu, J. Yang, G. Fu, X. Zhou, and Z. Zou, “A facile spray-assisted fabrication of homogenous flat CH3NH3PbI3 films for high performance mesostructure perovskite solar cells,” Mater. Lett. 157, 38–41 (2015).
[Crossref]

Li, H.

H. Zheng, D. Liu, Y. Wang, Y. Yang, H. Li, T. Zhang, H. Chen, L. Ji, Z. Chen, and S. Li, “Synergistic effect of additives on 2D perovskite film towards efficient and stable solar cell,” Chem. Eng. J. 389, 124266 (2020).
[Crossref]

Li, L.

M. A. Mahmud, T. Duong, Y. Yin, H. T. Pham, D. Walter, J. Peng, Y. Wu, L. Li, H. Shen, N. Wu, N. Mozaffari, G. Andersson, K. R. Catchpole, K. J. Weber, and T. P. White, “Double-sided surface passivation of 3D perovskite film for high-efficiency mixed-dimensional perovskite solar cells,” Adv. Funct. Mater. 30(7), 1907962 (2020).
[Crossref]

Li, M.

S. A. Veldhuis, P. P. Boix, N. Yantara, M. Li, T. C. Sum, N. Mathews, and S. G. Mhaisalkar, “Perovskite materials for light-emitting diodes and lasers,” Adv. Mater. 28(32), 6804–6834 (2016).
[Crossref]

Li, S.

H. Zheng, D. Liu, Y. Wang, Y. Yang, H. Li, T. Zhang, H. Chen, L. Ji, Z. Chen, and S. Li, “Synergistic effect of additives on 2D perovskite film towards efficient and stable solar cell,” Chem. Eng. J. 389, 124266 (2020).
[Crossref]

Li, Y.

L. Yuan, Z. Wang, R. Duan, P. Huang, K. Zhang, Q. Chen, N. K. Allam, Y. Zhou, B. Song, and Y. Li, “Semi-transparent perovskite solar cells: Unveiling the trade-off between transparency and efficiency,” J. Mater. Chem. A 6(40), 19696–19702 (2018).
[Crossref]

Li, Y. Q.

Q. M. Hong, R. P. Xu, T. Y. Jin, J. X. Tang, and Y. Q. Li, “Unraveling the light-induced degradation mechanism of CH3NH3PbI3 perovskite films,” Org. Electron. 67, 19–25 (2019).
[Crossref]

Liang, Z.

Z. Liang, S. Zhang, X. Xu, N. Wang, J. Wang, X. Wang, Z. Bi, G. Xu, N. Yuan, and J. Ding, “A large grain size perovskite thin film with a dense structure for planar heterojunction solar cells via spray deposition under ambient conditions,” RSC Adv. 5(74), 60562–60569 (2015).
[Crossref]

Lim, J. W.

J. W. Lim, H. Wang, C. H. Choi, H. Kwon, L. N. Quan, W. T. Park, Y. Y. Noh, and D. H. Kim, “Self-powered reduced-dimensionality perovskite photodiodes with controlled crystalline phase and improved stability,” Nano Energy 57, 761–770 (2019).
[Crossref]

Lim, S. S.

T. M. Koh, V. Shanmugam, X. Guo, S. S. Lim, O. Filonik, E. M. Herzig, P. Müller-Buschbaum, V. Swamy, S. T. Chien, S. G. Mhaisalkar, and N. Mathews, “Enhancing moisture tolerance in efficient hybrid 3D/2D perovskite photovoltaics,” J. Mater. Chem. A 6(5), 2122–2128 (2018).
[Crossref]

Lin, Q.

Z. Wang, Q. Lin, F. P. Chmiel, N. Sakai, L. M. Herz, and H. J. Snaith, “Efficient ambient-air-stable solar cells with 2D-3D heterostructured butylammonium-caesium-formamidinium lead halide perovskites,” Nat. Energy 2(9), 17135 (2017).
[Crossref]

Lin, Y.

Y. Lin, Y. Bai, Y. Fang, Z. Chen, S. Yang, X. Zheng, S. Tang, Y. Liu, J. Zhao, and J. Huang, “Enhanced thermal stability in perovskite solar cells by assembling 2D/3D stacking structures,” J. Phys. Chem. Lett. 9(3), 654–658 (2018).
[Crossref]

Y. Lin, Y. Bai, Y. Fang, Q. Wang, Y. Deng, and J. Huang, “Suppressed ion migration in low-dimensional perovskites,” ACS Energy Lett. 2(7), 1571–1572 (2017).
[Crossref]

Liu, D.

H. Zheng, D. Liu, Y. Wang, Y. Yang, H. Li, T. Zhang, H. Chen, L. Ji, Z. Chen, and S. Li, “Synergistic effect of additives on 2D perovskite film towards efficient and stable solar cell,” Chem. Eng. J. 389, 124266 (2020).
[Crossref]

Liu, F.

W. Fu, J. Wang, L. Zuo, K. Gao, F. Liu, D. S. Ginger, and A. K.-Y. Jen, “Two-dimensional perovskite solar cells with 14.1% power conversion efficiency and 0.68% external radiative efficiency,” ACS Energy Lett. 3(9), 2086–2093 (2018).
[Crossref]

Liu, J.

P. Luo, Y. Zhou, W. Xia, S. Zhou, J. Liu, Y. Lu, C. Xu, and L. Sun, “Colorful, bandgap-tunable, and air-stable CsPb(IxBr1-x)3 inorganic perovskite films via a novel sequential chemical vapor deposition,” Ceram. Int. 44(11), 12783–12788 (2018).
[Crossref]

Y. Lv, Y. Shi, X. Song, J. Liu, M. Wang, S. Wang, Y. Feng, S. Jin, and C. Hao, “Bromine doping as an efficient strategy to reduce the interfacial defects in hybrid two-dimensional/three-dimensional stacking perovskite solar cells,” ACS Appl. Mater. Interfaces 10(37), 31755–31764 (2018).
[Crossref]

Liu, S.

D. Cui, Z. Yang, D. Yang, X. Ren, Y. Liu, Q. Wei, H. Fan, J. Zeng, and S. Liu, “Color-tuned perovskite films prepared for efficient solar cell applications,” J. Phys. Chem. C 120(1), 42–47 (2016).
[Crossref]

Liu, Y.

Y. Lin, Y. Bai, Y. Fang, Z. Chen, S. Yang, X. Zheng, S. Tang, Y. Liu, J. Zhao, and J. Huang, “Enhanced thermal stability in perovskite solar cells by assembling 2D/3D stacking structures,” J. Phys. Chem. Lett. 9(3), 654–658 (2018).
[Crossref]

D. Cui, Z. Yang, D. Yang, X. Ren, Y. Liu, Q. Wei, H. Fan, J. Zeng, and S. Liu, “Color-tuned perovskite films prepared for efficient solar cell applications,” J. Phys. Chem. C 120(1), 42–47 (2016).
[Crossref]

Lu, H.

F. Zhang, H. Lu, J. Tong, J. J. Berry, M. C. Beard, and K. Zhu, “Advances in two-dimensional organic–inorganic hybrid perovskites,” Energy Environ. Sci. 13(4), 1154–1186 (2020).
[Crossref]

Lu, S.

C. Ma, C. Leng, Y. Ji, X. Wei, K. Sun, L. Tang, J. Yang, W. Luo, C. Li, Y. Deng, S. Feng, J. Shen, S. Lu, C. Du, and H. Shi, “2D/3D perovskite hybrids as moisture-tolerant and efficient light absorbers for solar cells,” Nanoscale 8(43), 18309–18314 (2016).
[Crossref]

Lu, Y.

P. Luo, Y. Zhou, W. Xia, S. Zhou, J. Liu, Y. Lu, C. Xu, and L. Sun, “Colorful, bandgap-tunable, and air-stable CsPb(IxBr1-x)3 inorganic perovskite films via a novel sequential chemical vapor deposition,” Ceram. Int. 44(11), 12783–12788 (2018).
[Crossref]

Luo, P.

P. Luo, Y. Zhou, W. Xia, S. Zhou, J. Liu, Y. Lu, C. Xu, and L. Sun, “Colorful, bandgap-tunable, and air-stable CsPb(IxBr1-x)3 inorganic perovskite films via a novel sequential chemical vapor deposition,” Ceram. Int. 44(11), 12783–12788 (2018).
[Crossref]

Luo, S.

G. Chai, S. Luo, H. Zhou, and W. A. Daoud, “CH3NH3PbI3-xBrx perovskite solar cells via spray assisted two-step deposition: Impact of bromide on stability and cell performance,” Mater. Des. 125, 222–229 (2017).
[Crossref]

Luo, W.

C. Ma, C. Leng, Y. Ji, X. Wei, K. Sun, L. Tang, J. Yang, W. Luo, C. Li, Y. Deng, S. Feng, J. Shen, S. Lu, C. Du, and H. Shi, “2D/3D perovskite hybrids as moisture-tolerant and efficient light absorbers for solar cells,” Nanoscale 8(43), 18309–18314 (2016).
[Crossref]

Lv, Y.

Y. Lv, Y. Shi, X. Song, J. Liu, M. Wang, S. Wang, Y. Feng, S. Jin, and C. Hao, “Bromine doping as an efficient strategy to reduce the interfacial defects in hybrid two-dimensional/three-dimensional stacking perovskite solar cells,” ACS Appl. Mater. Interfaces 10(37), 31755–31764 (2018).
[Crossref]

Ma, C.

C. Ma, C. Leng, Y. Ji, X. Wei, K. Sun, L. Tang, J. Yang, W. Luo, C. Li, Y. Deng, S. Feng, J. Shen, S. Lu, C. Du, and H. Shi, “2D/3D perovskite hybrids as moisture-tolerant and efficient light absorbers for solar cells,” Nanoscale 8(43), 18309–18314 (2016).
[Crossref]

Mahmud, M. A.

M. A. Mahmud, T. Duong, Y. Yin, H. T. Pham, D. Walter, J. Peng, Y. Wu, L. Li, H. Shen, N. Wu, N. Mozaffari, G. Andersson, K. R. Catchpole, K. J. Weber, and T. P. White, “Double-sided surface passivation of 3D perovskite film for high-efficiency mixed-dimensional perovskite solar cells,” Adv. Funct. Mater. 30(7), 1907962 (2020).
[Crossref]

Mali, S. S.

J. S. Shaikh, N. S. Shaikh, A. D. Sheikh, S. S. Mali, A. J. Kale, P. Kanjanaboos, C. K. Hong, J. H. Kim, and P. S. Patil, “Perovskite solar cells: In pursuit of efficiency and stability,” Mater. Des. 136, 54–80 (2017).
[Crossref]

Marí, B.

L. Atourki, E. Vega, B. Marí, M. Mollar, H. Ait Ahsaine, K. Bouabid, and A. Ihlal, “Role of the chemical substitution on the structural and luminescence properties of the mixed halide perovskite thin MAPbI3-x Brx (0 ≤ x ≤ 1) films,” Appl. Surf. Sci. 371, 112–117 (2016).
[Crossref]

Márquez, J. A.

M. Stolterfoht, C. M. Wolff, J. A. Márquez, S. Zhang, C. J. Hages, D. Rothhardt, S. Albrecht, P. L. Burn, P. Meredith, T. Unold, and D. Neher, “Visualization and suppression of interfacial recombination for high-efficiency large-area pin perovskite solar cells,” Nat. Energy 3(10), 847–854 (2018).
[Crossref]

Mathews, N.

T. M. Koh, V. Shanmugam, X. Guo, S. S. Lim, O. Filonik, E. M. Herzig, P. Müller-Buschbaum, V. Swamy, S. T. Chien, S. G. Mhaisalkar, and N. Mathews, “Enhancing moisture tolerance in efficient hybrid 3D/2D perovskite photovoltaics,” J. Mater. Chem. A 6(5), 2122–2128 (2018).
[Crossref]

S. A. Veldhuis, P. P. Boix, N. Yantara, M. Li, T. C. Sum, N. Mathews, and S. G. Mhaisalkar, “Perovskite materials for light-emitting diodes and lasers,” Adv. Mater. 28(32), 6804–6834 (2016).
[Crossref]

T. M. Koh, V. Shanmugam, J. Schlipf, L. Oesinghaus, P. Müller-Buschbaum, N. Ramakrishnan, V. Swamy, N. Mathews, P. P. Boix, and S. G. Mhaisalkar, “Nanostructuring mixed-dimensional perovskites: a route toward tunable, efficient photovoltaics,” Adv. Mater. 28(19), 3653–3661 (2016).
[Crossref]

P. P. Boix, S. Agarwala, T. M. Koh, N. Mathews, and S. G. Mhaisalkar, “Perovskite solar cells: Beyond methylammonium lead iodide,” J. Phys. Chem. Lett. 6(5), 898–907 (2015).
[Crossref]

McGehee, M. D.

I. C. Smith, E. T. Hoke, D. Solis-Ibarra, M. D. McGehee, and H. I. Karunadasa, “A layered hybrid perovskite solar-cell absorber with enhanced moisture stability,” Angew. Chem. Int. Ed. 53(42), 11232–11235 (2014).
[Crossref]

Mehmood, U.

U. Mehmood, A. Al-Ahmed, M. Afzaal, F. A. Al-Sulaiman, and M. Daud, “Recent progress and remaining challenges in organometallic halides based perovskite solar cells,” Renewable Sustainable Energy Rev. 78, 1–14 (2017).
[Crossref]

Mei, B.

D. Bae, A. Palmstrom, K. Roelofs, B. Mei, I. Chorkendorff, S. F. Bent, and P. C. K. Vesborg, “Tailoring Mixed-Halide, Wide-Gap Perovskites via Multistep Conversion Process,” ACS Appl. Mater. Interfaces 8(23), 14301–14306 (2016).
[Crossref]

Meredith, P.

M. Stolterfoht, C. M. Wolff, J. A. Márquez, S. Zhang, C. J. Hages, D. Rothhardt, S. Albrecht, P. L. Burn, P. Meredith, T. Unold, and D. Neher, “Visualization and suppression of interfacial recombination for high-efficiency large-area pin perovskite solar cells,” Nat. Energy 3(10), 847–854 (2018).
[Crossref]

Mhaisalkar, S. G.

T. M. Koh, V. Shanmugam, X. Guo, S. S. Lim, O. Filonik, E. M. Herzig, P. Müller-Buschbaum, V. Swamy, S. T. Chien, S. G. Mhaisalkar, and N. Mathews, “Enhancing moisture tolerance in efficient hybrid 3D/2D perovskite photovoltaics,” J. Mater. Chem. A 6(5), 2122–2128 (2018).
[Crossref]

S. A. Veldhuis, P. P. Boix, N. Yantara, M. Li, T. C. Sum, N. Mathews, and S. G. Mhaisalkar, “Perovskite materials for light-emitting diodes and lasers,” Adv. Mater. 28(32), 6804–6834 (2016).
[Crossref]

T. M. Koh, V. Shanmugam, J. Schlipf, L. Oesinghaus, P. Müller-Buschbaum, N. Ramakrishnan, V. Swamy, N. Mathews, P. P. Boix, and S. G. Mhaisalkar, “Nanostructuring mixed-dimensional perovskites: a route toward tunable, efficient photovoltaics,” Adv. Mater. 28(19), 3653–3661 (2016).
[Crossref]

P. P. Boix, S. Agarwala, T. M. Koh, N. Mathews, and S. G. Mhaisalkar, “Perovskite solar cells: Beyond methylammonium lead iodide,” J. Phys. Chem. Lett. 6(5), 898–907 (2015).
[Crossref]

Moghadamzadeh, S.

S. Gharibzadeh, B. Abdollahi Nejand, M. Jakoby, T. Abzieher, D. Hauschild, S. Moghadamzadeh, J. A. Schwenzer, P. Brenner, R. Schmager, A. A. Haghighirad, L. Weinhardt, U. Lemmer, B. S. Richards, I. A. Howard, and U. W. Paetzold, “Record open-circuit voltage wide-bandgap perovskite solar cells utilizing 2D/3D Perovskite Heterostructure,” Adv. Energy Mater. 9(21), 1803699 (2019).
[Crossref]

Mollar, M.

L. Atourki, E. Vega, B. Marí, M. Mollar, H. Ait Ahsaine, K. Bouabid, and A. Ihlal, “Role of the chemical substitution on the structural and luminescence properties of the mixed halide perovskite thin MAPbI3-x Brx (0 ≤ x ≤ 1) films,” Appl. Surf. Sci. 371, 112–117 (2016).
[Crossref]

Mozaffari, N.

M. A. Mahmud, T. Duong, Y. Yin, H. T. Pham, D. Walter, J. Peng, Y. Wu, L. Li, H. Shen, N. Wu, N. Mozaffari, G. Andersson, K. R. Catchpole, K. J. Weber, and T. P. White, “Double-sided surface passivation of 3D perovskite film for high-efficiency mixed-dimensional perovskite solar cells,” Adv. Funct. Mater. 30(7), 1907962 (2020).
[Crossref]

Müller-Buschbaum, P.

T. M. Koh, V. Shanmugam, X. Guo, S. S. Lim, O. Filonik, E. M. Herzig, P. Müller-Buschbaum, V. Swamy, S. T. Chien, S. G. Mhaisalkar, and N. Mathews, “Enhancing moisture tolerance in efficient hybrid 3D/2D perovskite photovoltaics,” J. Mater. Chem. A 6(5), 2122–2128 (2018).
[Crossref]

T. M. Koh, V. Shanmugam, J. Schlipf, L. Oesinghaus, P. Müller-Buschbaum, N. Ramakrishnan, V. Swamy, N. Mathews, P. P. Boix, and S. G. Mhaisalkar, “Nanostructuring mixed-dimensional perovskites: a route toward tunable, efficient photovoltaics,” Adv. Mater. 28(19), 3653–3661 (2016).
[Crossref]

Naikaew, A.

K. Z. Swe, A. Naikaew, P. Kaewurai, P. Pansa-Ngat, S. Sahasithiwat, L. Kangkaew, S. Rugmai, S. Soontaranon, and P. Kanjanaboos, “Layered perovskite with compact morphology and reduced grain size via vacuum assisted crystallization for luminescence applications,” Opt. Mater. Express 10(5), 1182 (2020).
[Crossref]

A. Naikaew, P. Kumnorkaew, T. Supasai, S. Suwanna, R. Hunkao, T. Srikhirin, and P. Kanjanaboos, “Enhancing high humidity stability of quasi-2D perovskite thin films through mixed cation doping and solvent engineering,” ChemNanoMat 5(10), 1280–1288 (2019).
[Crossref]

Nardes, A. M.

Y. Zhao, A. M. Nardes, and K. Zhu, “Mesoporous perovskite solar cells: Material composition, charge-carrier dynamics, and device characteristics,” Faraday Discuss. 176, 301–312 (2014).
[Crossref]

Neher, D.

M. Stolterfoht, C. M. Wolff, J. A. Márquez, S. Zhang, C. J. Hages, D. Rothhardt, S. Albrecht, P. L. Burn, P. Meredith, T. Unold, and D. Neher, “Visualization and suppression of interfacial recombination for high-efficiency large-area pin perovskite solar cells,” Nat. Energy 3(10), 847–854 (2018).
[Crossref]

Noh, Y. Y.

J. W. Lim, H. Wang, C. H. Choi, H. Kwon, L. N. Quan, W. T. Park, Y. Y. Noh, and D. H. Kim, “Self-powered reduced-dimensionality perovskite photodiodes with controlled crystalline phase and improved stability,” Nano Energy 57, 761–770 (2019).
[Crossref]

Oesinghaus, L.

T. M. Koh, V. Shanmugam, J. Schlipf, L. Oesinghaus, P. Müller-Buschbaum, N. Ramakrishnan, V. Swamy, N. Mathews, P. P. Boix, and S. G. Mhaisalkar, “Nanostructuring mixed-dimensional perovskites: a route toward tunable, efficient photovoltaics,” Adv. Mater. 28(19), 3653–3661 (2016).
[Crossref]

Ouafi, M.

M. Ouafi, B. Jaber, L. Atourki, R. Bekkari, and L. Laânab, “Improving UV stability of MAPbI3 perovskite thin films by bromide incorporation,” J. Alloys Compd. 746, 391–398 (2018).
[Crossref]

Paetzold, U. W.

S. Gharibzadeh, B. Abdollahi Nejand, M. Jakoby, T. Abzieher, D. Hauschild, S. Moghadamzadeh, J. A. Schwenzer, P. Brenner, R. Schmager, A. A. Haghighirad, L. Weinhardt, U. Lemmer, B. S. Richards, I. A. Howard, and U. W. Paetzold, “Record open-circuit voltage wide-bandgap perovskite solar cells utilizing 2D/3D Perovskite Heterostructure,” Adv. Energy Mater. 9(21), 1803699 (2019).
[Crossref]

Palmstrom, A.

D. Bae, A. Palmstrom, K. Roelofs, B. Mei, I. Chorkendorff, S. F. Bent, and P. C. K. Vesborg, “Tailoring Mixed-Halide, Wide-Gap Perovskites via Multistep Conversion Process,” ACS Appl. Mater. Interfaces 8(23), 14301–14306 (2016).
[Crossref]

Pan, X.

H. Chen, X. Ding, X. Pan, T. Hayat, A. Alsaedi, Y. Ding, and S. Dai, “Comprehensive studies of air-brush spray deposition used in fabricating high-efficiency CH3NH3PbI3 perovskite solar cells: Combining theories with practices,” J. Power Sources 402, 82–90 (2018).
[Crossref]

Pansa-Ngat, P.

Park, N. G.

J. Chen, J. Y. Seo, and N. G. Park, “Simultaneous improvement of photovoltaic performance and stability by in situ formation of 2D perovskite at (FAPbI3)0.88(CsPbBr3)0.12/CuSCN interface,” Adv. Energy Mater. 8(12), 1702714 (2018).
[Crossref]

H. S. Jung and N. G. Park, “Perovskite solar cells: From materials to devices,” Small 11(1), 10–25 (2015).
[Crossref]

Park, W. T.

J. W. Lim, H. Wang, C. H. Choi, H. Kwon, L. N. Quan, W. T. Park, Y. Y. Noh, and D. H. Kim, “Self-powered reduced-dimensionality perovskite photodiodes with controlled crystalline phase and improved stability,” Nano Energy 57, 761–770 (2019).
[Crossref]

Patil, P. S.

J. S. Shaikh, N. S. Shaikh, A. D. Sheikh, S. S. Mali, A. J. Kale, P. Kanjanaboos, C. K. Hong, J. H. Kim, and P. S. Patil, “Perovskite solar cells: In pursuit of efficiency and stability,” Mater. Des. 136, 54–80 (2017).
[Crossref]

Peng, J.

M. A. Mahmud, T. Duong, Y. Yin, H. T. Pham, D. Walter, J. Peng, Y. Wu, L. Li, H. Shen, N. Wu, N. Mozaffari, G. Andersson, K. R. Catchpole, K. J. Weber, and T. P. White, “Double-sided surface passivation of 3D perovskite film for high-efficiency mixed-dimensional perovskite solar cells,” Adv. Funct. Mater. 30(7), 1907962 (2020).
[Crossref]

Pham, H. T.

M. A. Mahmud, T. Duong, Y. Yin, H. T. Pham, D. Walter, J. Peng, Y. Wu, L. Li, H. Shen, N. Wu, N. Mozaffari, G. Andersson, K. R. Catchpole, K. J. Weber, and T. P. White, “Double-sided surface passivation of 3D perovskite film for high-efficiency mixed-dimensional perovskite solar cells,” Adv. Funct. Mater. 30(7), 1907962 (2020).
[Crossref]

Pietsch, P.

A. Buin, P. Pietsch, J. Xu, O. Voznyy, A. H. Ip, R. Comin, and E. H. Sargent, “Materials processing routes to trap-free halide perovskites,” Nano Lett. 14(11), 6281–6286 (2014).
[Crossref]

Pinsuwan, K.

K. Pinsuwan, C. Boonthum, T. Supasai, S. Sahasithiwat, P. Kumnorkaew, and P. Kanjanaboos, “Solar perovskite thin films with enhanced mechanical, thermal, UV, and moisture stability via vacuum-assisted deposition,” J. Mater. Sci. 55(8), 3484–3494 (2020).
[Crossref]

J. Ponchai, P. Kaewurai, C. Boonthum, K. Pinsuwan, T. Supasai, S. Sahasithiwat, and P. Kanjanaboos, “Modifying morphology and defects of low-dimensional, semi-transparent perovskite thin films: Via solvent type,” RSC Adv. 9(21), 12047–12054 (2019).
[Crossref]

Ponchai, J.

J. Ponchai, P. Kaewurai, C. Boonthum, K. Pinsuwan, T. Supasai, S. Sahasithiwat, and P. Kanjanaboos, “Modifying morphology and defects of low-dimensional, semi-transparent perovskite thin films: Via solvent type,” RSC Adv. 9(21), 12047–12054 (2019).
[Crossref]

Pramchu, S.

S. Pramchu, A. P. Jaroenjittichai, and Y. Laosiritaworn, “Surface doping of Sn in orthorhombic CH3NH3PbI3 for potential perovskite solar cells: first principles study,” Surf. Coat. Technol. 306, 285–289 (2016).
[Crossref]

Quan, L. N.

J. W. Lim, H. Wang, C. H. Choi, H. Kwon, L. N. Quan, W. T. Park, Y. Y. Noh, and D. H. Kim, “Self-powered reduced-dimensionality perovskite photodiodes with controlled crystalline phase and improved stability,” Nano Energy 57, 761–770 (2019).
[Crossref]

L. N. Quan, M. Yuan, R. Comin, O. Voznyy, E. M. Beauregard, S. Hoogland, A. Buin, A. R. Kirmani, K. Zhao, A. Amassian, D. H. Kim, and E. H. Sargent, “Ligand-stabilized reduced-dimensionality perovskites,” J. Am. Chem. Soc. 138(8), 2649–2655 (2016).
[Crossref]

Rajagopal, A.

T. Zhao, C. C. Chueh, Q. Chen, A. Rajagopal, and A. K. Y. Jen, “Defect Passivation of Organic-Inorganic Hybrid Perovskites by Diammonium Iodide toward High-Performance Photovoltaic Devices,” ACS Energy Lett. 1(4), 757–763 (2016).
[Crossref]

Ramakrishnan, N.

T. M. Koh, V. Shanmugam, J. Schlipf, L. Oesinghaus, P. Müller-Buschbaum, N. Ramakrishnan, V. Swamy, N. Mathews, P. P. Boix, and S. G. Mhaisalkar, “Nanostructuring mixed-dimensional perovskites: a route toward tunable, efficient photovoltaics,” Adv. Mater. 28(19), 3653–3661 (2016).
[Crossref]

Ramesh, M.

M. Ramesh, K. M. Boopathi, T. Y. Huang, Y. C. Huang, C. S. Tsao, and C. W. Chu, “Using an airbrush pen for layer-by-layer growth of continuous perovskite thin films for hybrid solar cells,” ACS Appl. Mater. Interfaces 7(4), 2359–2366 (2015).
[Crossref]

Ren, P.

Ren, X.

D. Cui, Z. Yang, D. Yang, X. Ren, Y. Liu, Q. Wei, H. Fan, J. Zeng, and S. Liu, “Color-tuned perovskite films prepared for efficient solar cell applications,” J. Phys. Chem. C 120(1), 42–47 (2016).
[Crossref]

Richards, B. S.

S. Gharibzadeh, B. Abdollahi Nejand, M. Jakoby, T. Abzieher, D. Hauschild, S. Moghadamzadeh, J. A. Schwenzer, P. Brenner, R. Schmager, A. A. Haghighirad, L. Weinhardt, U. Lemmer, B. S. Richards, I. A. Howard, and U. W. Paetzold, “Record open-circuit voltage wide-bandgap perovskite solar cells utilizing 2D/3D Perovskite Heterostructure,” Adv. Energy Mater. 9(21), 1803699 (2019).
[Crossref]

Roelofs, K.

D. Bae, A. Palmstrom, K. Roelofs, B. Mei, I. Chorkendorff, S. F. Bent, and P. C. K. Vesborg, “Tailoring Mixed-Halide, Wide-Gap Perovskites via Multistep Conversion Process,” ACS Appl. Mater. Interfaces 8(23), 14301–14306 (2016).
[Crossref]

Roose, B.

J. P. Correa-Baena, W. Tress, K. Domanski, E. H. Anaraki, S. H. Turren-Cruz, B. Roose, P. P. Boix, M. Grätzel, M. Saliba, A. Abate, and A. Hagfeldt, “Identifying and suppressing interfacial recombination to achieve high open-circuit voltage in perovskite solar cells,” Energy Environ. Sci. 10(5), 1207–1212 (2017).
[Crossref]

Rothhardt, D.

M. Stolterfoht, C. M. Wolff, J. A. Márquez, S. Zhang, C. J. Hages, D. Rothhardt, S. Albrecht, P. L. Burn, P. Meredith, T. Unold, and D. Neher, “Visualization and suppression of interfacial recombination for high-efficiency large-area pin perovskite solar cells,” Nat. Energy 3(10), 847–854 (2018).
[Crossref]

Rugmai, S.

Sahasithiwat, S.

K. Z. Swe, A. Naikaew, P. Kaewurai, P. Pansa-Ngat, S. Sahasithiwat, L. Kangkaew, S. Rugmai, S. Soontaranon, and P. Kanjanaboos, “Layered perovskite with compact morphology and reduced grain size via vacuum assisted crystallization for luminescence applications,” Opt. Mater. Express 10(5), 1182 (2020).
[Crossref]

K. Pinsuwan, C. Boonthum, T. Supasai, S. Sahasithiwat, P. Kumnorkaew, and P. Kanjanaboos, “Solar perovskite thin films with enhanced mechanical, thermal, UV, and moisture stability via vacuum-assisted deposition,” J. Mater. Sci. 55(8), 3484–3494 (2020).
[Crossref]

J. Ponchai, P. Kaewurai, C. Boonthum, K. Pinsuwan, T. Supasai, S. Sahasithiwat, and P. Kanjanaboos, “Modifying morphology and defects of low-dimensional, semi-transparent perovskite thin films: Via solvent type,” RSC Adv. 9(21), 12047–12054 (2019).
[Crossref]

Sakai, N.

Z. Wang, Q. Lin, F. P. Chmiel, N. Sakai, L. M. Herz, and H. J. Snaith, “Efficient ambient-air-stable solar cells with 2D-3D heterostructured butylammonium-caesium-formamidinium lead halide perovskites,” Nat. Energy 2(9), 17135 (2017).
[Crossref]

Saliba, M.

J. P. Correa-Baena, W. Tress, K. Domanski, E. H. Anaraki, S. H. Turren-Cruz, B. Roose, P. P. Boix, M. Grätzel, M. Saliba, A. Abate, and A. Hagfeldt, “Identifying and suppressing interfacial recombination to achieve high open-circuit voltage in perovskite solar cells,” Energy Environ. Sci. 10(5), 1207–1212 (2017).
[Crossref]

Sargent, E. H.

L. N. Quan, M. Yuan, R. Comin, O. Voznyy, E. M. Beauregard, S. Hoogland, A. Buin, A. R. Kirmani, K. Zhao, A. Amassian, D. H. Kim, and E. H. Sargent, “Ligand-stabilized reduced-dimensionality perovskites,” J. Am. Chem. Soc. 138(8), 2649–2655 (2016).
[Crossref]

A. Buin, P. Pietsch, J. Xu, O. Voznyy, A. H. Ip, R. Comin, and E. H. Sargent, “Materials processing routes to trap-free halide perovskites,” Nano Lett. 14(11), 6281–6286 (2014).
[Crossref]

Schlipf, J.

T. M. Koh, V. Shanmugam, J. Schlipf, L. Oesinghaus, P. Müller-Buschbaum, N. Ramakrishnan, V. Swamy, N. Mathews, P. P. Boix, and S. G. Mhaisalkar, “Nanostructuring mixed-dimensional perovskites: a route toward tunable, efficient photovoltaics,” Adv. Mater. 28(19), 3653–3661 (2016).
[Crossref]

Schmager, R.

S. Gharibzadeh, B. Abdollahi Nejand, M. Jakoby, T. Abzieher, D. Hauschild, S. Moghadamzadeh, J. A. Schwenzer, P. Brenner, R. Schmager, A. A. Haghighirad, L. Weinhardt, U. Lemmer, B. S. Richards, I. A. Howard, and U. W. Paetzold, “Record open-circuit voltage wide-bandgap perovskite solar cells utilizing 2D/3D Perovskite Heterostructure,” Adv. Energy Mater. 9(21), 1803699 (2019).
[Crossref]

Schwenzer, J. A.

S. Gharibzadeh, B. Abdollahi Nejand, M. Jakoby, T. Abzieher, D. Hauschild, S. Moghadamzadeh, J. A. Schwenzer, P. Brenner, R. Schmager, A. A. Haghighirad, L. Weinhardt, U. Lemmer, B. S. Richards, I. A. Howard, and U. W. Paetzold, “Record open-circuit voltage wide-bandgap perovskite solar cells utilizing 2D/3D Perovskite Heterostructure,” Adv. Energy Mater. 9(21), 1803699 (2019).
[Crossref]

Seo, J. Y.

J. Chen, J. Y. Seo, and N. G. Park, “Simultaneous improvement of photovoltaic performance and stability by in situ formation of 2D perovskite at (FAPbI3)0.88(CsPbBr3)0.12/CuSCN interface,” Adv. Energy Mater. 8(12), 1702714 (2018).
[Crossref]

Shaikh, J. S.

J. S. Shaikh, N. S. Shaikh, A. D. Sheikh, S. S. Mali, A. J. Kale, P. Kanjanaboos, C. K. Hong, J. H. Kim, and P. S. Patil, “Perovskite solar cells: In pursuit of efficiency and stability,” Mater. Des. 136, 54–80 (2017).
[Crossref]

Shaikh, N. S.

J. S. Shaikh, N. S. Shaikh, A. D. Sheikh, S. S. Mali, A. J. Kale, P. Kanjanaboos, C. K. Hong, J. H. Kim, and P. S. Patil, “Perovskite solar cells: In pursuit of efficiency and stability,” Mater. Des. 136, 54–80 (2017).
[Crossref]

Shanmugam, V.

T. M. Koh, V. Shanmugam, X. Guo, S. S. Lim, O. Filonik, E. M. Herzig, P. Müller-Buschbaum, V. Swamy, S. T. Chien, S. G. Mhaisalkar, and N. Mathews, “Enhancing moisture tolerance in efficient hybrid 3D/2D perovskite photovoltaics,” J. Mater. Chem. A 6(5), 2122–2128 (2018).
[Crossref]

T. M. Koh, V. Shanmugam, J. Schlipf, L. Oesinghaus, P. Müller-Buschbaum, N. Ramakrishnan, V. Swamy, N. Mathews, P. P. Boix, and S. G. Mhaisalkar, “Nanostructuring mixed-dimensional perovskites: a route toward tunable, efficient photovoltaics,” Adv. Mater. 28(19), 3653–3661 (2016).
[Crossref]

Sheikh, A. D.

J. S. Shaikh, N. S. Shaikh, A. D. Sheikh, S. S. Mali, A. J. Kale, P. Kanjanaboos, C. K. Hong, J. H. Kim, and P. S. Patil, “Perovskite solar cells: In pursuit of efficiency and stability,” Mater. Des. 136, 54–80 (2017).
[Crossref]

Shen, H.

M. A. Mahmud, T. Duong, Y. Yin, H. T. Pham, D. Walter, J. Peng, Y. Wu, L. Li, H. Shen, N. Wu, N. Mozaffari, G. Andersson, K. R. Catchpole, K. J. Weber, and T. P. White, “Double-sided surface passivation of 3D perovskite film for high-efficiency mixed-dimensional perovskite solar cells,” Adv. Funct. Mater. 30(7), 1907962 (2020).
[Crossref]

Shen, J.

C. Ma, C. Leng, Y. Ji, X. Wei, K. Sun, L. Tang, J. Yang, W. Luo, C. Li, Y. Deng, S. Feng, J. Shen, S. Lu, C. Du, and H. Shi, “2D/3D perovskite hybrids as moisture-tolerant and efficient light absorbers for solar cells,” Nanoscale 8(43), 18309–18314 (2016).
[Crossref]

Shi, H.

C. Ma, C. Leng, Y. Ji, X. Wei, K. Sun, L. Tang, J. Yang, W. Luo, C. Li, Y. Deng, S. Feng, J. Shen, S. Lu, C. Du, and H. Shi, “2D/3D perovskite hybrids as moisture-tolerant and efficient light absorbers for solar cells,” Nanoscale 8(43), 18309–18314 (2016).
[Crossref]

Shi, Y.

Y. Lv, Y. Shi, X. Song, J. Liu, M. Wang, S. Wang, Y. Feng, S. Jin, and C. Hao, “Bromine doping as an efficient strategy to reduce the interfacial defects in hybrid two-dimensional/three-dimensional stacking perovskite solar cells,” ACS Appl. Mater. Interfaces 10(37), 31755–31764 (2018).
[Crossref]

Smith, I. C.

I. C. Smith, E. T. Hoke, D. Solis-Ibarra, M. D. McGehee, and H. I. Karunadasa, “A layered hybrid perovskite solar-cell absorber with enhanced moisture stability,” Angew. Chem. Int. Ed. 53(42), 11232–11235 (2014).
[Crossref]

Snaith, H. J.

Z. Wang, Q. Lin, F. P. Chmiel, N. Sakai, L. M. Herz, and H. J. Snaith, “Efficient ambient-air-stable solar cells with 2D-3D heterostructured butylammonium-caesium-formamidinium lead halide perovskites,” Nat. Energy 2(9), 17135 (2017).
[Crossref]

Solis-Ibarra, D.

I. C. Smith, E. T. Hoke, D. Solis-Ibarra, M. D. McGehee, and H. I. Karunadasa, “A layered hybrid perovskite solar-cell absorber with enhanced moisture stability,” Angew. Chem. Int. Ed. 53(42), 11232–11235 (2014).
[Crossref]

Song, B.

L. Yuan, Z. Wang, R. Duan, P. Huang, K. Zhang, Q. Chen, N. K. Allam, Y. Zhou, B. Song, and Y. Li, “Semi-transparent perovskite solar cells: Unveiling the trade-off between transparency and efficiency,” J. Mater. Chem. A 6(40), 19696–19702 (2018).
[Crossref]

Song, X.

Y. Lv, Y. Shi, X. Song, J. Liu, M. Wang, S. Wang, Y. Feng, S. Jin, and C. Hao, “Bromine doping as an efficient strategy to reduce the interfacial defects in hybrid two-dimensional/three-dimensional stacking perovskite solar cells,” ACS Appl. Mater. Interfaces 10(37), 31755–31764 (2018).
[Crossref]

Soontaranon, S.

Srikhirin, T.

A. Naikaew, P. Kumnorkaew, T. Supasai, S. Suwanna, R. Hunkao, T. Srikhirin, and P. Kanjanaboos, “Enhancing high humidity stability of quasi-2D perovskite thin films through mixed cation doping and solvent engineering,” ChemNanoMat 5(10), 1280–1288 (2019).
[Crossref]

Stolterfoht, M.

M. Stolterfoht, C. M. Wolff, J. A. Márquez, S. Zhang, C. J. Hages, D. Rothhardt, S. Albrecht, P. L. Burn, P. Meredith, T. Unold, and D. Neher, “Visualization and suppression of interfacial recombination for high-efficiency large-area pin perovskite solar cells,” Nat. Energy 3(10), 847–854 (2018).
[Crossref]

Stoumpos, C. C.

D. H. Cao, C. C. Stoumpos, O. K. Farha, J. T. Hupp, and M. G. Kanatzidis, “2D homologous perovskites as light-absorbing materials for solar cell applications,” J. Am. Chem. Soc. 137(24), 7843–7850 (2015).
[Crossref]

Sum, T. C.

S. A. Veldhuis, P. P. Boix, N. Yantara, M. Li, T. C. Sum, N. Mathews, and S. G. Mhaisalkar, “Perovskite materials for light-emitting diodes and lasers,” Adv. Mater. 28(32), 6804–6834 (2016).
[Crossref]

Sun, K.

C. Ma, C. Leng, Y. Ji, X. Wei, K. Sun, L. Tang, J. Yang, W. Luo, C. Li, Y. Deng, S. Feng, J. Shen, S. Lu, C. Du, and H. Shi, “2D/3D perovskite hybrids as moisture-tolerant and efficient light absorbers for solar cells,” Nanoscale 8(43), 18309–18314 (2016).
[Crossref]

Sun, L.

P. Luo, Y. Zhou, W. Xia, S. Zhou, J. Liu, Y. Lu, C. Xu, and L. Sun, “Colorful, bandgap-tunable, and air-stable CsPb(IxBr1-x)3 inorganic perovskite films via a novel sequential chemical vapor deposition,” Ceram. Int. 44(11), 12783–12788 (2018).
[Crossref]

Supasai, T.

K. Pinsuwan, C. Boonthum, T. Supasai, S. Sahasithiwat, P. Kumnorkaew, and P. Kanjanaboos, “Solar perovskite thin films with enhanced mechanical, thermal, UV, and moisture stability via vacuum-assisted deposition,” J. Mater. Sci. 55(8), 3484–3494 (2020).
[Crossref]

J. Ponchai, P. Kaewurai, C. Boonthum, K. Pinsuwan, T. Supasai, S. Sahasithiwat, and P. Kanjanaboos, “Modifying morphology and defects of low-dimensional, semi-transparent perovskite thin films: Via solvent type,” RSC Adv. 9(21), 12047–12054 (2019).
[Crossref]

A. Naikaew, P. Kumnorkaew, T. Supasai, S. Suwanna, R. Hunkao, T. Srikhirin, and P. Kanjanaboos, “Enhancing high humidity stability of quasi-2D perovskite thin films through mixed cation doping and solvent engineering,” ChemNanoMat 5(10), 1280–1288 (2019).
[Crossref]

Suwanna, S.

A. Naikaew, P. Kumnorkaew, T. Supasai, S. Suwanna, R. Hunkao, T. Srikhirin, and P. Kanjanaboos, “Enhancing high humidity stability of quasi-2D perovskite thin films through mixed cation doping and solvent engineering,” ChemNanoMat 5(10), 1280–1288 (2019).
[Crossref]

Swamy, V.

T. M. Koh, V. Shanmugam, X. Guo, S. S. Lim, O. Filonik, E. M. Herzig, P. Müller-Buschbaum, V. Swamy, S. T. Chien, S. G. Mhaisalkar, and N. Mathews, “Enhancing moisture tolerance in efficient hybrid 3D/2D perovskite photovoltaics,” J. Mater. Chem. A 6(5), 2122–2128 (2018).
[Crossref]

T. M. Koh, V. Shanmugam, J. Schlipf, L. Oesinghaus, P. Müller-Buschbaum, N. Ramakrishnan, V. Swamy, N. Mathews, P. P. Boix, and S. G. Mhaisalkar, “Nanostructuring mixed-dimensional perovskites: a route toward tunable, efficient photovoltaics,” Adv. Mater. 28(19), 3653–3661 (2016).
[Crossref]

Swe, K. Z.

Tang, J. X.

Q. M. Hong, R. P. Xu, T. Y. Jin, J. X. Tang, and Y. Q. Li, “Unraveling the light-induced degradation mechanism of CH3NH3PbI3 perovskite films,” Org. Electron. 67, 19–25 (2019).
[Crossref]

Tang, L.

C. Ma, C. Leng, Y. Ji, X. Wei, K. Sun, L. Tang, J. Yang, W. Luo, C. Li, Y. Deng, S. Feng, J. Shen, S. Lu, C. Du, and H. Shi, “2D/3D perovskite hybrids as moisture-tolerant and efficient light absorbers for solar cells,” Nanoscale 8(43), 18309–18314 (2016).
[Crossref]

Tang, S.

Y. Lin, Y. Bai, Y. Fang, Z. Chen, S. Yang, X. Zheng, S. Tang, Y. Liu, J. Zhao, and J. Huang, “Enhanced thermal stability in perovskite solar cells by assembling 2D/3D stacking structures,” J. Phys. Chem. Lett. 9(3), 654–658 (2018).
[Crossref]

Tong, J.

F. Zhang, H. Lu, J. Tong, J. J. Berry, M. C. Beard, and K. Zhu, “Advances in two-dimensional organic–inorganic hybrid perovskites,” Energy Environ. Sci. 13(4), 1154–1186 (2020).
[Crossref]

Tress, W.

J. P. Correa-Baena, W. Tress, K. Domanski, E. H. Anaraki, S. H. Turren-Cruz, B. Roose, P. P. Boix, M. Grätzel, M. Saliba, A. Abate, and A. Hagfeldt, “Identifying and suppressing interfacial recombination to achieve high open-circuit voltage in perovskite solar cells,” Energy Environ. Sci. 10(5), 1207–1212 (2017).
[Crossref]

Tsao, C. S.

M. Ramesh, K. M. Boopathi, T. Y. Huang, Y. C. Huang, C. S. Tsao, and C. W. Chu, “Using an airbrush pen for layer-by-layer growth of continuous perovskite thin films for hybrid solar cells,” ACS Appl. Mater. Interfaces 7(4), 2359–2366 (2015).
[Crossref]

Turren-Cruz, S. H.

J. P. Correa-Baena, W. Tress, K. Domanski, E. H. Anaraki, S. H. Turren-Cruz, B. Roose, P. P. Boix, M. Grätzel, M. Saliba, A. Abate, and A. Hagfeldt, “Identifying and suppressing interfacial recombination to achieve high open-circuit voltage in perovskite solar cells,” Energy Environ. Sci. 10(5), 1207–1212 (2017).
[Crossref]

Unold, T.

M. Stolterfoht, C. M. Wolff, J. A. Márquez, S. Zhang, C. J. Hages, D. Rothhardt, S. Albrecht, P. L. Burn, P. Meredith, T. Unold, and D. Neher, “Visualization and suppression of interfacial recombination for high-efficiency large-area pin perovskite solar cells,” Nat. Energy 3(10), 847–854 (2018).
[Crossref]

Vega, E.

L. Atourki, E. Vega, B. Marí, M. Mollar, H. Ait Ahsaine, K. Bouabid, and A. Ihlal, “Role of the chemical substitution on the structural and luminescence properties of the mixed halide perovskite thin MAPbI3-x Brx (0 ≤ x ≤ 1) films,” Appl. Surf. Sci. 371, 112–117 (2016).
[Crossref]

Veldhuis, S. A.

S. A. Veldhuis, P. P. Boix, N. Yantara, M. Li, T. C. Sum, N. Mathews, and S. G. Mhaisalkar, “Perovskite materials for light-emitting diodes and lasers,” Adv. Mater. 28(32), 6804–6834 (2016).
[Crossref]

Vesborg, P. C. K.

D. Bae, A. Palmstrom, K. Roelofs, B. Mei, I. Chorkendorff, S. F. Bent, and P. C. K. Vesborg, “Tailoring Mixed-Halide, Wide-Gap Perovskites via Multistep Conversion Process,” ACS Appl. Mater. Interfaces 8(23), 14301–14306 (2016).
[Crossref]

Voznyy, O.

L. N. Quan, M. Yuan, R. Comin, O. Voznyy, E. M. Beauregard, S. Hoogland, A. Buin, A. R. Kirmani, K. Zhao, A. Amassian, D. H. Kim, and E. H. Sargent, “Ligand-stabilized reduced-dimensionality perovskites,” J. Am. Chem. Soc. 138(8), 2649–2655 (2016).
[Crossref]

A. Buin, P. Pietsch, J. Xu, O. Voznyy, A. H. Ip, R. Comin, and E. H. Sargent, “Materials processing routes to trap-free halide perovskites,” Nano Lett. 14(11), 6281–6286 (2014).
[Crossref]

Walter, D.

M. A. Mahmud, T. Duong, Y. Yin, H. T. Pham, D. Walter, J. Peng, Y. Wu, L. Li, H. Shen, N. Wu, N. Mozaffari, G. Andersson, K. R. Catchpole, K. J. Weber, and T. P. White, “Double-sided surface passivation of 3D perovskite film for high-efficiency mixed-dimensional perovskite solar cells,” Adv. Funct. Mater. 30(7), 1907962 (2020).
[Crossref]

Wang, H.

J. W. Lim, H. Wang, C. H. Choi, H. Kwon, L. N. Quan, W. T. Park, Y. Y. Noh, and D. H. Kim, “Self-powered reduced-dimensionality perovskite photodiodes with controlled crystalline phase and improved stability,” Nano Energy 57, 761–770 (2019).
[Crossref]

Wang, J.

F. Guo, B. Zhang, J. Wang, H. Bai, R. Guo, Y. Huang, and P. Ren, “Facile solvothermal method to synthesize hybrid perovskite CH3NH3PbX3 (X = I, Br, Cl) crystals: publisher’s note,” Opt. Mater. Express 8(2), 210 (2018).
[Crossref]

W. Fu, J. Wang, L. Zuo, K. Gao, F. Liu, D. S. Ginger, and A. K.-Y. Jen, “Two-dimensional perovskite solar cells with 14.1% power conversion efficiency and 0.68% external radiative efficiency,” ACS Energy Lett. 3(9), 2086–2093 (2018).
[Crossref]

Z. Liang, S. Zhang, X. Xu, N. Wang, J. Wang, X. Wang, Z. Bi, G. Xu, N. Yuan, and J. Ding, “A large grain size perovskite thin film with a dense structure for planar heterojunction solar cells via spray deposition under ambient conditions,” RSC Adv. 5(74), 60562–60569 (2015).
[Crossref]

Wang, M.

Y. Lv, Y. Shi, X. Song, J. Liu, M. Wang, S. Wang, Y. Feng, S. Jin, and C. Hao, “Bromine doping as an efficient strategy to reduce the interfacial defects in hybrid two-dimensional/three-dimensional stacking perovskite solar cells,” ACS Appl. Mater. Interfaces 10(37), 31755–31764 (2018).
[Crossref]

Wang, N.

Z. Liang, S. Zhang, X. Xu, N. Wang, J. Wang, X. Wang, Z. Bi, G. Xu, N. Yuan, and J. Ding, “A large grain size perovskite thin film with a dense structure for planar heterojunction solar cells via spray deposition under ambient conditions,” RSC Adv. 5(74), 60562–60569 (2015).
[Crossref]

Wang, Q.

Y. Lin, Y. Bai, Y. Fang, Q. Wang, Y. Deng, and J. Huang, “Suppressed ion migration in low-dimensional perovskites,” ACS Energy Lett. 2(7), 1571–1572 (2017).
[Crossref]

Wang, S.

Y. Lv, Y. Shi, X. Song, J. Liu, M. Wang, S. Wang, Y. Feng, S. Jin, and C. Hao, “Bromine doping as an efficient strategy to reduce the interfacial defects in hybrid two-dimensional/three-dimensional stacking perovskite solar cells,” ACS Appl. Mater. Interfaces 10(37), 31755–31764 (2018).
[Crossref]

Wang, X.

Z. Liang, S. Zhang, X. Xu, N. Wang, J. Wang, X. Wang, Z. Bi, G. Xu, N. Yuan, and J. Ding, “A large grain size perovskite thin film with a dense structure for planar heterojunction solar cells via spray deposition under ambient conditions,” RSC Adv. 5(74), 60562–60569 (2015).
[Crossref]

Wang, Y.

H. Zheng, D. Liu, Y. Wang, Y. Yang, H. Li, T. Zhang, H. Chen, L. Ji, Z. Chen, and S. Li, “Synergistic effect of additives on 2D perovskite film towards efficient and stable solar cell,” Chem. Eng. J. 389, 124266 (2020).
[Crossref]

Wang, Z.

L. Yuan, Z. Wang, R. Duan, P. Huang, K. Zhang, Q. Chen, N. K. Allam, Y. Zhou, B. Song, and Y. Li, “Semi-transparent perovskite solar cells: Unveiling the trade-off between transparency and efficiency,” J. Mater. Chem. A 6(40), 19696–19702 (2018).
[Crossref]

Z. Wang, Q. Lin, F. P. Chmiel, N. Sakai, L. M. Herz, and H. J. Snaith, “Efficient ambient-air-stable solar cells with 2D-3D heterostructured butylammonium-caesium-formamidinium lead halide perovskites,” Nat. Energy 2(9), 17135 (2017).
[Crossref]

Weber, K. J.

M. A. Mahmud, T. Duong, Y. Yin, H. T. Pham, D. Walter, J. Peng, Y. Wu, L. Li, H. Shen, N. Wu, N. Mozaffari, G. Andersson, K. R. Catchpole, K. J. Weber, and T. P. White, “Double-sided surface passivation of 3D perovskite film for high-efficiency mixed-dimensional perovskite solar cells,” Adv. Funct. Mater. 30(7), 1907962 (2020).
[Crossref]

Wei, Q.

D. Cui, Z. Yang, D. Yang, X. Ren, Y. Liu, Q. Wei, H. Fan, J. Zeng, and S. Liu, “Color-tuned perovskite films prepared for efficient solar cell applications,” J. Phys. Chem. C 120(1), 42–47 (2016).
[Crossref]

Wei, X.

C. Ma, C. Leng, Y. Ji, X. Wei, K. Sun, L. Tang, J. Yang, W. Luo, C. Li, Y. Deng, S. Feng, J. Shen, S. Lu, C. Du, and H. Shi, “2D/3D perovskite hybrids as moisture-tolerant and efficient light absorbers for solar cells,” Nanoscale 8(43), 18309–18314 (2016).
[Crossref]

Weinhardt, L.

S. Gharibzadeh, B. Abdollahi Nejand, M. Jakoby, T. Abzieher, D. Hauschild, S. Moghadamzadeh, J. A. Schwenzer, P. Brenner, R. Schmager, A. A. Haghighirad, L. Weinhardt, U. Lemmer, B. S. Richards, I. A. Howard, and U. W. Paetzold, “Record open-circuit voltage wide-bandgap perovskite solar cells utilizing 2D/3D Perovskite Heterostructure,” Adv. Energy Mater. 9(21), 1803699 (2019).
[Crossref]

White, T. P.

M. A. Mahmud, T. Duong, Y. Yin, H. T. Pham, D. Walter, J. Peng, Y. Wu, L. Li, H. Shen, N. Wu, N. Mozaffari, G. Andersson, K. R. Catchpole, K. J. Weber, and T. P. White, “Double-sided surface passivation of 3D perovskite film for high-efficiency mixed-dimensional perovskite solar cells,” Adv. Funct. Mater. 30(7), 1907962 (2020).
[Crossref]

Wierzbowska, M.

B. El Cohen, M. Wierzbowska, and L. Etgar, “High efficiency quasi 2D lead bromide perovskite solar cells using various barrier molecules,,” Sustain. Energy Fuels 1(9), 1935–1943 (2017).
[Crossref]

B. El Cohen, M. Wierzbowska, and L. Etgar, “High efficiency and high open circuit voltage in quasi 2D perovskite based solar cells,” Adv. Funct. Mater. 27(5), 1604733 (2017).
[Crossref]

Wolff, C. M.

M. Stolterfoht, C. M. Wolff, J. A. Márquez, S. Zhang, C. J. Hages, D. Rothhardt, S. Albrecht, P. L. Burn, P. Meredith, T. Unold, and D. Neher, “Visualization and suppression of interfacial recombination for high-efficiency large-area pin perovskite solar cells,” Nat. Energy 3(10), 847–854 (2018).
[Crossref]

Wu, N.

M. A. Mahmud, T. Duong, Y. Yin, H. T. Pham, D. Walter, J. Peng, Y. Wu, L. Li, H. Shen, N. Wu, N. Mozaffari, G. Andersson, K. R. Catchpole, K. J. Weber, and T. P. White, “Double-sided surface passivation of 3D perovskite film for high-efficiency mixed-dimensional perovskite solar cells,” Adv. Funct. Mater. 30(7), 1907962 (2020).
[Crossref]

Wu, Y.

M. A. Mahmud, T. Duong, Y. Yin, H. T. Pham, D. Walter, J. Peng, Y. Wu, L. Li, H. Shen, N. Wu, N. Mozaffari, G. Andersson, K. R. Catchpole, K. J. Weber, and T. P. White, “Double-sided surface passivation of 3D perovskite film for high-efficiency mixed-dimensional perovskite solar cells,” Adv. Funct. Mater. 30(7), 1907962 (2020).
[Crossref]

Xia, W.

P. Luo, Y. Zhou, W. Xia, S. Zhou, J. Liu, Y. Lu, C. Xu, and L. Sun, “Colorful, bandgap-tunable, and air-stable CsPb(IxBr1-x)3 inorganic perovskite films via a novel sequential chemical vapor deposition,” Ceram. Int. 44(11), 12783–12788 (2018).
[Crossref]

Xu, C.

P. Luo, Y. Zhou, W. Xia, S. Zhou, J. Liu, Y. Lu, C. Xu, and L. Sun, “Colorful, bandgap-tunable, and air-stable CsPb(IxBr1-x)3 inorganic perovskite films via a novel sequential chemical vapor deposition,” Ceram. Int. 44(11), 12783–12788 (2018).
[Crossref]

Xu, G.

Z. Liang, S. Zhang, X. Xu, N. Wang, J. Wang, X. Wang, Z. Bi, G. Xu, N. Yuan, and J. Ding, “A large grain size perovskite thin film with a dense structure for planar heterojunction solar cells via spray deposition under ambient conditions,” RSC Adv. 5(74), 60562–60569 (2015).
[Crossref]

Xu, J.

A. Buin, P. Pietsch, J. Xu, O. Voznyy, A. H. Ip, R. Comin, and E. H. Sargent, “Materials processing routes to trap-free halide perovskites,” Nano Lett. 14(11), 6281–6286 (2014).
[Crossref]

Xu, R. P.

Q. M. Hong, R. P. Xu, T. Y. Jin, J. X. Tang, and Y. Q. Li, “Unraveling the light-induced degradation mechanism of CH3NH3PbI3 perovskite films,” Org. Electron. 67, 19–25 (2019).
[Crossref]

Xu, X.

Z. Liang, S. Zhang, X. Xu, N. Wang, J. Wang, X. Wang, Z. Bi, G. Xu, N. Yuan, and J. Ding, “A large grain size perovskite thin film with a dense structure for planar heterojunction solar cells via spray deposition under ambient conditions,” RSC Adv. 5(74), 60562–60569 (2015).
[Crossref]

Yang, D.

D. Cui, Z. Yang, D. Yang, X. Ren, Y. Liu, Q. Wei, H. Fan, J. Zeng, and S. Liu, “Color-tuned perovskite films prepared for efficient solar cell applications,” J. Phys. Chem. C 120(1), 42–47 (2016).
[Crossref]

Yang, J.

C. Ma, C. Leng, Y. Ji, X. Wei, K. Sun, L. Tang, J. Yang, W. Luo, C. Li, Y. Deng, S. Feng, J. Shen, S. Lu, C. Du, and H. Shi, “2D/3D perovskite hybrids as moisture-tolerant and efficient light absorbers for solar cells,” Nanoscale 8(43), 18309–18314 (2016).
[Crossref]

F. Li, C. Bao, H. Gao, W. Zhu, T. Yu, J. Yang, G. Fu, X. Zhou, and Z. Zou, “A facile spray-assisted fabrication of homogenous flat CH3NH3PbI3 films for high performance mesostructure perovskite solar cells,” Mater. Lett. 157, 38–41 (2015).
[Crossref]

Yang, S.

Y. Lin, Y. Bai, Y. Fang, Z. Chen, S. Yang, X. Zheng, S. Tang, Y. Liu, J. Zhao, and J. Huang, “Enhanced thermal stability in perovskite solar cells by assembling 2D/3D stacking structures,” J. Phys. Chem. Lett. 9(3), 654–658 (2018).
[Crossref]

Yang, Y.

H. Zheng, D. Liu, Y. Wang, Y. Yang, H. Li, T. Zhang, H. Chen, L. Ji, Z. Chen, and S. Li, “Synergistic effect of additives on 2D perovskite film towards efficient and stable solar cell,” Chem. Eng. J. 389, 124266 (2020).
[Crossref]

Yang, Z.

D. Cui, Z. Yang, D. Yang, X. Ren, Y. Liu, Q. Wei, H. Fan, J. Zeng, and S. Liu, “Color-tuned perovskite films prepared for efficient solar cell applications,” J. Phys. Chem. C 120(1), 42–47 (2016).
[Crossref]

Yantara, N.

S. A. Veldhuis, P. P. Boix, N. Yantara, M. Li, T. C. Sum, N. Mathews, and S. G. Mhaisalkar, “Perovskite materials for light-emitting diodes and lasers,” Adv. Mater. 28(32), 6804–6834 (2016).
[Crossref]

Yates, H. M.

M. Afzaal and H. M. Yates, “Growth patterns and properties of aerosol-assisted chemical vapor deposition of CH3NH3PbI3 films in a single step,” Surf. Coat. Technol. 321, 336–340 (2017).
[Crossref]

Yi, Z.

Z. Fang and Z. Yi, “First principles study on mixed orthorhombic perovskite CH3NH3Pb(I1-xBrx)3,” Chem. Phys. Lett. 687, 19–22 (2017).
[Crossref]

Yin, Y.

M. A. Mahmud, T. Duong, Y. Yin, H. T. Pham, D. Walter, J. Peng, Y. Wu, L. Li, H. Shen, N. Wu, N. Mozaffari, G. Andersson, K. R. Catchpole, K. J. Weber, and T. P. White, “Double-sided surface passivation of 3D perovskite film for high-efficiency mixed-dimensional perovskite solar cells,” Adv. Funct. Mater. 30(7), 1907962 (2020).
[Crossref]

Yu, T.

F. Li, C. Bao, H. Gao, W. Zhu, T. Yu, J. Yang, G. Fu, X. Zhou, and Z. Zou, “A facile spray-assisted fabrication of homogenous flat CH3NH3PbI3 films for high performance mesostructure perovskite solar cells,” Mater. Lett. 157, 38–41 (2015).
[Crossref]

Yuan, L.

L. Yuan, Z. Wang, R. Duan, P. Huang, K. Zhang, Q. Chen, N. K. Allam, Y. Zhou, B. Song, and Y. Li, “Semi-transparent perovskite solar cells: Unveiling the trade-off between transparency and efficiency,” J. Mater. Chem. A 6(40), 19696–19702 (2018).
[Crossref]

Yuan, M.

L. N. Quan, M. Yuan, R. Comin, O. Voznyy, E. M. Beauregard, S. Hoogland, A. Buin, A. R. Kirmani, K. Zhao, A. Amassian, D. H. Kim, and E. H. Sargent, “Ligand-stabilized reduced-dimensionality perovskites,” J. Am. Chem. Soc. 138(8), 2649–2655 (2016).
[Crossref]

Yuan, N.

Z. Liang, S. Zhang, X. Xu, N. Wang, J. Wang, X. Wang, Z. Bi, G. Xu, N. Yuan, and J. Ding, “A large grain size perovskite thin film with a dense structure for planar heterojunction solar cells via spray deposition under ambient conditions,” RSC Adv. 5(74), 60562–60569 (2015).
[Crossref]

Zeng, J.

D. Cui, Z. Yang, D. Yang, X. Ren, Y. Liu, Q. Wei, H. Fan, J. Zeng, and S. Liu, “Color-tuned perovskite films prepared for efficient solar cell applications,” J. Phys. Chem. C 120(1), 42–47 (2016).
[Crossref]

Zhang, B.

Zhang, F.

F. Zhang, H. Lu, J. Tong, J. J. Berry, M. C. Beard, and K. Zhu, “Advances in two-dimensional organic–inorganic hybrid perovskites,” Energy Environ. Sci. 13(4), 1154–1186 (2020).
[Crossref]

Zhang, K.

L. Yuan, Z. Wang, R. Duan, P. Huang, K. Zhang, Q. Chen, N. K. Allam, Y. Zhou, B. Song, and Y. Li, “Semi-transparent perovskite solar cells: Unveiling the trade-off between transparency and efficiency,” J. Mater. Chem. A 6(40), 19696–19702 (2018).
[Crossref]

Zhang, S.

M. Stolterfoht, C. M. Wolff, J. A. Márquez, S. Zhang, C. J. Hages, D. Rothhardt, S. Albrecht, P. L. Burn, P. Meredith, T. Unold, and D. Neher, “Visualization and suppression of interfacial recombination for high-efficiency large-area pin perovskite solar cells,” Nat. Energy 3(10), 847–854 (2018).
[Crossref]

Z. Liang, S. Zhang, X. Xu, N. Wang, J. Wang, X. Wang, Z. Bi, G. Xu, N. Yuan, and J. Ding, “A large grain size perovskite thin film with a dense structure for planar heterojunction solar cells via spray deposition under ambient conditions,” RSC Adv. 5(74), 60562–60569 (2015).
[Crossref]

Zhang, T.

H. Zheng, D. Liu, Y. Wang, Y. Yang, H. Li, T. Zhang, H. Chen, L. Ji, Z. Chen, and S. Li, “Synergistic effect of additives on 2D perovskite film towards efficient and stable solar cell,” Chem. Eng. J. 389, 124266 (2020).
[Crossref]

Zhao, J.

Y. Lin, Y. Bai, Y. Fang, Z. Chen, S. Yang, X. Zheng, S. Tang, Y. Liu, J. Zhao, and J. Huang, “Enhanced thermal stability in perovskite solar cells by assembling 2D/3D stacking structures,” J. Phys. Chem. Lett. 9(3), 654–658 (2018).
[Crossref]

Zhao, K.

L. N. Quan, M. Yuan, R. Comin, O. Voznyy, E. M. Beauregard, S. Hoogland, A. Buin, A. R. Kirmani, K. Zhao, A. Amassian, D. H. Kim, and E. H. Sargent, “Ligand-stabilized reduced-dimensionality perovskites,” J. Am. Chem. Soc. 138(8), 2649–2655 (2016).
[Crossref]

Zhao, T.

T. Zhao, C. C. Chueh, Q. Chen, A. Rajagopal, and A. K. Y. Jen, “Defect Passivation of Organic-Inorganic Hybrid Perovskites by Diammonium Iodide toward High-Performance Photovoltaic Devices,” ACS Energy Lett. 1(4), 757–763 (2016).
[Crossref]

Zhao, Y.

Y. Zhao, A. M. Nardes, and K. Zhu, “Mesoporous perovskite solar cells: Material composition, charge-carrier dynamics, and device characteristics,” Faraday Discuss. 176, 301–312 (2014).
[Crossref]

Zheng, H.

H. Zheng, D. Liu, Y. Wang, Y. Yang, H. Li, T. Zhang, H. Chen, L. Ji, Z. Chen, and S. Li, “Synergistic effect of additives on 2D perovskite film towards efficient and stable solar cell,” Chem. Eng. J. 389, 124266 (2020).
[Crossref]

Zheng, X.

Y. Lin, Y. Bai, Y. Fang, Z. Chen, S. Yang, X. Zheng, S. Tang, Y. Liu, J. Zhao, and J. Huang, “Enhanced thermal stability in perovskite solar cells by assembling 2D/3D stacking structures,” J. Phys. Chem. Lett. 9(3), 654–658 (2018).
[Crossref]

Zhou, H.

G. Chai, S. Luo, H. Zhou, and W. A. Daoud, “CH3NH3PbI3-xBrx perovskite solar cells via spray assisted two-step deposition: Impact of bromide on stability and cell performance,” Mater. Des. 125, 222–229 (2017).
[Crossref]

Zhou, S.

P. Luo, Y. Zhou, W. Xia, S. Zhou, J. Liu, Y. Lu, C. Xu, and L. Sun, “Colorful, bandgap-tunable, and air-stable CsPb(IxBr1-x)3 inorganic perovskite films via a novel sequential chemical vapor deposition,” Ceram. Int. 44(11), 12783–12788 (2018).
[Crossref]

Zhou, X.

F. Li, C. Bao, H. Gao, W. Zhu, T. Yu, J. Yang, G. Fu, X. Zhou, and Z. Zou, “A facile spray-assisted fabrication of homogenous flat CH3NH3PbI3 films for high performance mesostructure perovskite solar cells,” Mater. Lett. 157, 38–41 (2015).
[Crossref]

Zhou, Y.

P. Luo, Y. Zhou, W. Xia, S. Zhou, J. Liu, Y. Lu, C. Xu, and L. Sun, “Colorful, bandgap-tunable, and air-stable CsPb(IxBr1-x)3 inorganic perovskite films via a novel sequential chemical vapor deposition,” Ceram. Int. 44(11), 12783–12788 (2018).
[Crossref]

L. Yuan, Z. Wang, R. Duan, P. Huang, K. Zhang, Q. Chen, N. K. Allam, Y. Zhou, B. Song, and Y. Li, “Semi-transparent perovskite solar cells: Unveiling the trade-off between transparency and efficiency,” J. Mater. Chem. A 6(40), 19696–19702 (2018).
[Crossref]

Zhu, K.

F. Zhang, H. Lu, J. Tong, J. J. Berry, M. C. Beard, and K. Zhu, “Advances in two-dimensional organic–inorganic hybrid perovskites,” Energy Environ. Sci. 13(4), 1154–1186 (2020).
[Crossref]

Y. Zhao, A. M. Nardes, and K. Zhu, “Mesoporous perovskite solar cells: Material composition, charge-carrier dynamics, and device characteristics,” Faraday Discuss. 176, 301–312 (2014).
[Crossref]

Zhu, W.

F. Li, C. Bao, H. Gao, W. Zhu, T. Yu, J. Yang, G. Fu, X. Zhou, and Z. Zou, “A facile spray-assisted fabrication of homogenous flat CH3NH3PbI3 films for high performance mesostructure perovskite solar cells,” Mater. Lett. 157, 38–41 (2015).
[Crossref]

Zou, Z.

F. Li, C. Bao, H. Gao, W. Zhu, T. Yu, J. Yang, G. Fu, X. Zhou, and Z. Zou, “A facile spray-assisted fabrication of homogenous flat CH3NH3PbI3 films for high performance mesostructure perovskite solar cells,” Mater. Lett. 157, 38–41 (2015).
[Crossref]

Zuo, L.

W. Fu, J. Wang, L. Zuo, K. Gao, F. Liu, D. S. Ginger, and A. K.-Y. Jen, “Two-dimensional perovskite solar cells with 14.1% power conversion efficiency and 0.68% external radiative efficiency,” ACS Energy Lett. 3(9), 2086–2093 (2018).
[Crossref]

ACS Appl. Mater. Interfaces (3)

M. Ramesh, K. M. Boopathi, T. Y. Huang, Y. C. Huang, C. S. Tsao, and C. W. Chu, “Using an airbrush pen for layer-by-layer growth of continuous perovskite thin films for hybrid solar cells,” ACS Appl. Mater. Interfaces 7(4), 2359–2366 (2015).
[Crossref]

Y. Lv, Y. Shi, X. Song, J. Liu, M. Wang, S. Wang, Y. Feng, S. Jin, and C. Hao, “Bromine doping as an efficient strategy to reduce the interfacial defects in hybrid two-dimensional/three-dimensional stacking perovskite solar cells,” ACS Appl. Mater. Interfaces 10(37), 31755–31764 (2018).
[Crossref]

D. Bae, A. Palmstrom, K. Roelofs, B. Mei, I. Chorkendorff, S. F. Bent, and P. C. K. Vesborg, “Tailoring Mixed-Halide, Wide-Gap Perovskites via Multistep Conversion Process,” ACS Appl. Mater. Interfaces 8(23), 14301–14306 (2016).
[Crossref]

ACS Energy Lett. (3)

T. Zhao, C. C. Chueh, Q. Chen, A. Rajagopal, and A. K. Y. Jen, “Defect Passivation of Organic-Inorganic Hybrid Perovskites by Diammonium Iodide toward High-Performance Photovoltaic Devices,” ACS Energy Lett. 1(4), 757–763 (2016).
[Crossref]

Y. Lin, Y. Bai, Y. Fang, Q. Wang, Y. Deng, and J. Huang, “Suppressed ion migration in low-dimensional perovskites,” ACS Energy Lett. 2(7), 1571–1572 (2017).
[Crossref]

W. Fu, J. Wang, L. Zuo, K. Gao, F. Liu, D. S. Ginger, and A. K.-Y. Jen, “Two-dimensional perovskite solar cells with 14.1% power conversion efficiency and 0.68% external radiative efficiency,” ACS Energy Lett. 3(9), 2086–2093 (2018).
[Crossref]

Adv. Energy Mater. (2)

S. Gharibzadeh, B. Abdollahi Nejand, M. Jakoby, T. Abzieher, D. Hauschild, S. Moghadamzadeh, J. A. Schwenzer, P. Brenner, R. Schmager, A. A. Haghighirad, L. Weinhardt, U. Lemmer, B. S. Richards, I. A. Howard, and U. W. Paetzold, “Record open-circuit voltage wide-bandgap perovskite solar cells utilizing 2D/3D Perovskite Heterostructure,” Adv. Energy Mater. 9(21), 1803699 (2019).
[Crossref]

J. Chen, J. Y. Seo, and N. G. Park, “Simultaneous improvement of photovoltaic performance and stability by in situ formation of 2D perovskite at (FAPbI3)0.88(CsPbBr3)0.12/CuSCN interface,” Adv. Energy Mater. 8(12), 1702714 (2018).
[Crossref]

Adv. Funct. Mater. (2)

B. El Cohen, M. Wierzbowska, and L. Etgar, “High efficiency and high open circuit voltage in quasi 2D perovskite based solar cells,” Adv. Funct. Mater. 27(5), 1604733 (2017).
[Crossref]

M. A. Mahmud, T. Duong, Y. Yin, H. T. Pham, D. Walter, J. Peng, Y. Wu, L. Li, H. Shen, N. Wu, N. Mozaffari, G. Andersson, K. R. Catchpole, K. J. Weber, and T. P. White, “Double-sided surface passivation of 3D perovskite film for high-efficiency mixed-dimensional perovskite solar cells,” Adv. Funct. Mater. 30(7), 1907962 (2020).
[Crossref]

Adv. Mater. (2)

T. M. Koh, V. Shanmugam, J. Schlipf, L. Oesinghaus, P. Müller-Buschbaum, N. Ramakrishnan, V. Swamy, N. Mathews, P. P. Boix, and S. G. Mhaisalkar, “Nanostructuring mixed-dimensional perovskites: a route toward tunable, efficient photovoltaics,” Adv. Mater. 28(19), 3653–3661 (2016).
[Crossref]

S. A. Veldhuis, P. P. Boix, N. Yantara, M. Li, T. C. Sum, N. Mathews, and S. G. Mhaisalkar, “Perovskite materials for light-emitting diodes and lasers,” Adv. Mater. 28(32), 6804–6834 (2016).
[Crossref]

Angew. Chem. Int. Ed. (1)

I. C. Smith, E. T. Hoke, D. Solis-Ibarra, M. D. McGehee, and H. I. Karunadasa, “A layered hybrid perovskite solar-cell absorber with enhanced moisture stability,” Angew. Chem. Int. Ed. 53(42), 11232–11235 (2014).
[Crossref]

Appl. Surf. Sci. (1)

L. Atourki, E. Vega, B. Marí, M. Mollar, H. Ait Ahsaine, K. Bouabid, and A. Ihlal, “Role of the chemical substitution on the structural and luminescence properties of the mixed halide perovskite thin MAPbI3-x Brx (0 ≤ x ≤ 1) films,” Appl. Surf. Sci. 371, 112–117 (2016).
[Crossref]

Ceram. Int. (1)

P. Luo, Y. Zhou, W. Xia, S. Zhou, J. Liu, Y. Lu, C. Xu, and L. Sun, “Colorful, bandgap-tunable, and air-stable CsPb(IxBr1-x)3 inorganic perovskite films via a novel sequential chemical vapor deposition,” Ceram. Int. 44(11), 12783–12788 (2018).
[Crossref]

Chem. Eng. J. (1)

H. Zheng, D. Liu, Y. Wang, Y. Yang, H. Li, T. Zhang, H. Chen, L. Ji, Z. Chen, and S. Li, “Synergistic effect of additives on 2D perovskite film towards efficient and stable solar cell,” Chem. Eng. J. 389, 124266 (2020).
[Crossref]

Chem. Phys. Lett. (1)

Z. Fang and Z. Yi, “First principles study on mixed orthorhombic perovskite CH3NH3Pb(I1-xBrx)3,” Chem. Phys. Lett. 687, 19–22 (2017).
[Crossref]

ChemNanoMat (1)

A. Naikaew, P. Kumnorkaew, T. Supasai, S. Suwanna, R. Hunkao, T. Srikhirin, and P. Kanjanaboos, “Enhancing high humidity stability of quasi-2D perovskite thin films through mixed cation doping and solvent engineering,” ChemNanoMat 5(10), 1280–1288 (2019).
[Crossref]

Energy Environ. Sci. (2)

F. Zhang, H. Lu, J. Tong, J. J. Berry, M. C. Beard, and K. Zhu, “Advances in two-dimensional organic–inorganic hybrid perovskites,” Energy Environ. Sci. 13(4), 1154–1186 (2020).
[Crossref]

J. P. Correa-Baena, W. Tress, K. Domanski, E. H. Anaraki, S. H. Turren-Cruz, B. Roose, P. P. Boix, M. Grätzel, M. Saliba, A. Abate, and A. Hagfeldt, “Identifying and suppressing interfacial recombination to achieve high open-circuit voltage in perovskite solar cells,” Energy Environ. Sci. 10(5), 1207–1212 (2017).
[Crossref]

Faraday Discuss. (1)

Y. Zhao, A. M. Nardes, and K. Zhu, “Mesoporous perovskite solar cells: Material composition, charge-carrier dynamics, and device characteristics,” Faraday Discuss. 176, 301–312 (2014).
[Crossref]

J. Alloys Compd. (1)

M. Ouafi, B. Jaber, L. Atourki, R. Bekkari, and L. Laânab, “Improving UV stability of MAPbI3 perovskite thin films by bromide incorporation,” J. Alloys Compd. 746, 391–398 (2018).
[Crossref]

J. Am. Chem. Soc. (2)

D. H. Cao, C. C. Stoumpos, O. K. Farha, J. T. Hupp, and M. G. Kanatzidis, “2D homologous perovskites as light-absorbing materials for solar cell applications,” J. Am. Chem. Soc. 137(24), 7843–7850 (2015).
[Crossref]

L. N. Quan, M. Yuan, R. Comin, O. Voznyy, E. M. Beauregard, S. Hoogland, A. Buin, A. R. Kirmani, K. Zhao, A. Amassian, D. H. Kim, and E. H. Sargent, “Ligand-stabilized reduced-dimensionality perovskites,” J. Am. Chem. Soc. 138(8), 2649–2655 (2016).
[Crossref]

J. Mater. Chem. A (3)

T. M. Koh, V. Shanmugam, X. Guo, S. S. Lim, O. Filonik, E. M. Herzig, P. Müller-Buschbaum, V. Swamy, S. T. Chien, S. G. Mhaisalkar, and N. Mathews, “Enhancing moisture tolerance in efficient hybrid 3D/2D perovskite photovoltaics,” J. Mater. Chem. A 6(5), 2122–2128 (2018).
[Crossref]

L. Yuan, Z. Wang, R. Duan, P. Huang, K. Zhang, Q. Chen, N. K. Allam, Y. Zhou, B. Song, and Y. Li, “Semi-transparent perovskite solar cells: Unveiling the trade-off between transparency and efficiency,” J. Mater. Chem. A 6(40), 19696–19702 (2018).
[Crossref]

J. H. Heo, M. H. Lee, M. H. Jang, and S. H. Im, “Highly efficient CH3NH3PbI3-xClx mixed halide perovskite solar cells prepared by re-dissolution and crystal grain growth via spray coating,” J. Mater. Chem. A 4(45), 17636–17642 (2016).
[Crossref]

J. Mater. Sci. (1)

K. Pinsuwan, C. Boonthum, T. Supasai, S. Sahasithiwat, P. Kumnorkaew, and P. Kanjanaboos, “Solar perovskite thin films with enhanced mechanical, thermal, UV, and moisture stability via vacuum-assisted deposition,” J. Mater. Sci. 55(8), 3484–3494 (2020).
[Crossref]

J. Phys. Chem. C (1)

D. Cui, Z. Yang, D. Yang, X. Ren, Y. Liu, Q. Wei, H. Fan, J. Zeng, and S. Liu, “Color-tuned perovskite films prepared for efficient solar cell applications,” J. Phys. Chem. C 120(1), 42–47 (2016).
[Crossref]

J. Phys. Chem. Lett. (2)

Y. Lin, Y. Bai, Y. Fang, Z. Chen, S. Yang, X. Zheng, S. Tang, Y. Liu, J. Zhao, and J. Huang, “Enhanced thermal stability in perovskite solar cells by assembling 2D/3D stacking structures,” J. Phys. Chem. Lett. 9(3), 654–658 (2018).
[Crossref]

P. P. Boix, S. Agarwala, T. M. Koh, N. Mathews, and S. G. Mhaisalkar, “Perovskite solar cells: Beyond methylammonium lead iodide,” J. Phys. Chem. Lett. 6(5), 898–907 (2015).
[Crossref]

J. Power Sources (1)

H. Chen, X. Ding, X. Pan, T. Hayat, A. Alsaedi, Y. Ding, and S. Dai, “Comprehensive studies of air-brush spray deposition used in fabricating high-efficiency CH3NH3PbI3 perovskite solar cells: Combining theories with practices,” J. Power Sources 402, 82–90 (2018).
[Crossref]

Mater. Des. (2)

J. S. Shaikh, N. S. Shaikh, A. D. Sheikh, S. S. Mali, A. J. Kale, P. Kanjanaboos, C. K. Hong, J. H. Kim, and P. S. Patil, “Perovskite solar cells: In pursuit of efficiency and stability,” Mater. Des. 136, 54–80 (2017).
[Crossref]

G. Chai, S. Luo, H. Zhou, and W. A. Daoud, “CH3NH3PbI3-xBrx perovskite solar cells via spray assisted two-step deposition: Impact of bromide on stability and cell performance,” Mater. Des. 125, 222–229 (2017).
[Crossref]

Mater. Lett. (1)

F. Li, C. Bao, H. Gao, W. Zhu, T. Yu, J. Yang, G. Fu, X. Zhou, and Z. Zou, “A facile spray-assisted fabrication of homogenous flat CH3NH3PbI3 films for high performance mesostructure perovskite solar cells,” Mater. Lett. 157, 38–41 (2015).
[Crossref]

Nano Energy (1)

J. W. Lim, H. Wang, C. H. Choi, H. Kwon, L. N. Quan, W. T. Park, Y. Y. Noh, and D. H. Kim, “Self-powered reduced-dimensionality perovskite photodiodes with controlled crystalline phase and improved stability,” Nano Energy 57, 761–770 (2019).
[Crossref]

Nano Lett. (1)

A. Buin, P. Pietsch, J. Xu, O. Voznyy, A. H. Ip, R. Comin, and E. H. Sargent, “Materials processing routes to trap-free halide perovskites,” Nano Lett. 14(11), 6281–6286 (2014).
[Crossref]

Nanoscale (1)

C. Ma, C. Leng, Y. Ji, X. Wei, K. Sun, L. Tang, J. Yang, W. Luo, C. Li, Y. Deng, S. Feng, J. Shen, S. Lu, C. Du, and H. Shi, “2D/3D perovskite hybrids as moisture-tolerant and efficient light absorbers for solar cells,” Nanoscale 8(43), 18309–18314 (2016).
[Crossref]

Nat. Energy (2)

M. Stolterfoht, C. M. Wolff, J. A. Márquez, S. Zhang, C. J. Hages, D. Rothhardt, S. Albrecht, P. L. Burn, P. Meredith, T. Unold, and D. Neher, “Visualization and suppression of interfacial recombination for high-efficiency large-area pin perovskite solar cells,” Nat. Energy 3(10), 847–854 (2018).
[Crossref]

Z. Wang, Q. Lin, F. P. Chmiel, N. Sakai, L. M. Herz, and H. J. Snaith, “Efficient ambient-air-stable solar cells with 2D-3D heterostructured butylammonium-caesium-formamidinium lead halide perovskites,” Nat. Energy 2(9), 17135 (2017).
[Crossref]

Opt. Mater. Express (2)

Org. Electron. (1)

Q. M. Hong, R. P. Xu, T. Y. Jin, J. X. Tang, and Y. Q. Li, “Unraveling the light-induced degradation mechanism of CH3NH3PbI3 perovskite films,” Org. Electron. 67, 19–25 (2019).
[Crossref]

Renewable Sustainable Energy Rev. (1)

U. Mehmood, A. Al-Ahmed, M. Afzaal, F. A. Al-Sulaiman, and M. Daud, “Recent progress and remaining challenges in organometallic halides based perovskite solar cells,” Renewable Sustainable Energy Rev. 78, 1–14 (2017).
[Crossref]

RSC Adv. (2)

J. Ponchai, P. Kaewurai, C. Boonthum, K. Pinsuwan, T. Supasai, S. Sahasithiwat, and P. Kanjanaboos, “Modifying morphology and defects of low-dimensional, semi-transparent perovskite thin films: Via solvent type,” RSC Adv. 9(21), 12047–12054 (2019).
[Crossref]

Z. Liang, S. Zhang, X. Xu, N. Wang, J. Wang, X. Wang, Z. Bi, G. Xu, N. Yuan, and J. Ding, “A large grain size perovskite thin film with a dense structure for planar heterojunction solar cells via spray deposition under ambient conditions,” RSC Adv. 5(74), 60562–60569 (2015).
[Crossref]

Small (1)

H. S. Jung and N. G. Park, “Perovskite solar cells: From materials to devices,” Small 11(1), 10–25 (2015).
[Crossref]

Surf. Coat. Technol. (2)

M. Afzaal and H. M. Yates, “Growth patterns and properties of aerosol-assisted chemical vapor deposition of CH3NH3PbI3 films in a single step,” Surf. Coat. Technol. 321, 336–340 (2017).
[Crossref]

S. Pramchu, A. P. Jaroenjittichai, and Y. Laosiritaworn, “Surface doping of Sn in orthorhombic CH3NH3PbI3 for potential perovskite solar cells: first principles study,” Surf. Coat. Technol. 306, 285–289 (2016).
[Crossref]

Sustain. Energy Fuels (1)

B. El Cohen, M. Wierzbowska, and L. Etgar, “High efficiency quasi 2D lead bromide perovskite solar cells using various barrier molecules,,” Sustain. Energy Fuels 1(9), 1935–1943 (2017).
[Crossref]

Cited By

OSA participates in Crossref's Cited-By Linking service. Citing articles from OSA journals and other participating publishers are listed here.

Alert me when this article is cited.


Figures (7)

Fig. 1.
Fig. 1. (a) UV-Vis absorption of n∞ (3D), n50 (quasi-2D), n5 (quasi-2D), and n1 (2D) perovskite thin films. The film colors are changed according to dimensionality. (b) X-ray diffraction peaks of perovskite thin films (labeled with *) with different dimensions. PbI2 peaks are labeled with #. (c) Photoluminescence spectra (PL) of n∞, n50, n30, n10, n5, and n1 perovskite thin films. (d) Optical images of n∞, n50, n30, n10, n5, and n1 perovskite thin films.
Fig. 2.
Fig. 2. (a) UV-Vis absorption of single layer (n∞, n50) and double layer n∞/n50 perovskite thin films. (b) Spray setup used for depositing double layer perovskite thin film. (c) Band diagram of double layer n∞/n50 perovskite solar cell versus thickness of each layer of the device. [47] (d) SEM cross-section of different layers in n∞/n50 perovskite solar cell and top surfaces of n∞ and n50 thin films. Top surface images are from two single layer samples both with thickness around 400 nm.
Fig. 3.
Fig. 3. (a) X-ray diffraction peaks of perovskite thin films (labeled with *) with different dimensions. PbI2 peaks are labeled with #. (b) UV-Vis spectroscopy of n∞, n∞/n50, and n50 perovskite before and after 500 hours under 50% RH. (c) Perovskite films heated at 300°C captured 1 minute apart for each frame. (d) Contact angles of distilled water (20 µL droplet) on top of perovskite films.
Fig. 4.
Fig. 4. (a) Power conversion efficiency (PCE), (b) Jsc and Voc, (c) J-V curve of n∞, n∞/n50, and n50 perovskite solar cells.
Fig. 5.
Fig. 5. (a) PCEs of double layer n∞/n50 perovskite solar cell with various n∞ spray times. Spray time of n50 capping layer was fixed at 2 seconds for all samples. (b) PCE of n∞/n50 perovskite solar cell with 9 seconds n∞ perovskite spray time, and various n50 spray times.
Fig. 6.
Fig. 6. SEM cross-sections of n∞, n5 (quasi-2D), and n1(2D) perovskite thin films. All perovskite films were deposited with 50 µL/s spray rate, 4 seconds spray time, and 0.2 M solution in DMF.
Fig. 7.
Fig. 7. SEM surface morphology of (a) 3D, (b) 3D/quasi-2D (n50), and (c) quasi-2D (n50) perovskites.

Tables (3)

Tables Icon

Table 1. Average solar cell parameters of n∞, n∞/n50, and n50 perovskite solar cells.

Tables Icon

Table 2. Average crystallite sizes of n∞, n∞/n50, and n50 perovskite calculated from (110) and (220) planes and average visible transmittance (AVT).

Tables Icon

Table 3. Solar cell parameters from 8 devices for n∞, n∞/n50, and n50 perovskite solar cells under 1 sun illumination.

Metrics