Abstract
Fabry–Perot-based ultrasound sensors at fiber tips have performed high sensitivity and immunity of electromagnetic interference with a relatively compact size. Nevertheless, the reverberation at fiber tips causes a strong noise that degrades the sensing capability. Here we propose a fiber optical-based ultrasound sensor with three design approaches to reduce the reverberation, including designs with an eccentric core, absorptive shield, and arc edge. The effect was experimentally validated with a photoacoustic signal excitation. Compared with bare single-mode fibers in simulation, the low-reverberation design increased the signal-to-noise ratio by 32.1 dB with identical excitation. The experimental results demonstrated the “clean” response with almost invisible reverberations, which was validated by a commercial hydrophone. This research solved the reverberation problems and provided a low-noise design for fiber optic ultrasound sensing.
© 2020 Optical Society of America
Full Article | PDF ArticleMore Like This
Xiangdong Ma, Yiqi Cai, Bo Fu, Lijun Xu, and Jianguo Ma
Opt. Lett. 44(23) 5852-5855 (2019)
Esra Aytac Kipergil, Eleanor Martin, Sunish J. Mathews, Ioannis Papakonstantinou, Erwin J. Alles, and Adrien E. Desjardins
Opt. Lett. 48(10) 2615-2618 (2023)
Di Liu, Yizhi Liang, Long Jin, Huojiao Sun, Linghao Cheng, and Bai-Ou Guan
Opt. Lett. 41(19) 4530-4533 (2016)