Abstract

We experimentally demonstrate the lasing action of a new nanolaser design with a tunnel junction. By using a heavily doped tunnel junction for hole injection, we can replace the p-type contact material of a conventional nanolaser diode with a low-resistance n-type contact layer. This leads to a significant reduction of the device resistance and lowers the threshold voltage from 5 V to around 0.95 V at 77 K. The lasing behavior is verified by the light output versus the injection current (L-I) characterization and second-order coherence function measurements. Because of less Joule heating during current injection, the nanolaser can be operated at temperatures as high as 180 K under CW pumping. The incorporation of heavily doped tunnel junctions may pave the way for other nanoscale cavity design for improved heat management.

© 2019 Optical Society of America

Full Article  |  PDF Article
More Like This
Nano-antenna enhanced waveguide integrated light source based on an MIS tunnel junction

Baohu Huang, Siping Gao, Yan Liu, Jian Wang, Zhenguo Liu, Yongxin Guo, and Weibing Lu
Opt. Lett. 44(9) 2330-2333 (2019)

InGaN blue light emitting micro-diodes with current path defined by tunnel junction

Krzysztof Gibasiewicz, Agata Bojarska-Cieślińska, Grzegorz Muzioł, Czesław Skierbiszewski, Szymon Grzanka, Anna Kafar, Piotr Perlin, Stephen Najda, and Tadeusz Suski
Opt. Lett. 45(15) 4332-4335 (2020)

Telecom InP/InGaAs nanolaser array directly grown on (001) silicon-on-insulator

Yu Han, Wai Kit Ng, Ying Xue, Qiang Li, Kam Sing Wong, and Kei May Lau
Opt. Lett. 44(4) 767-770 (2019)

References

You do not have subscription access to this journal. Citation lists with outbound citation links are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access Optica Member Subscription

Cited By

You do not have subscription access to this journal. Cited by links are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access Optica Member Subscription

Figures (4)

You do not have subscription access to this journal. Figure files are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access Optica Member Subscription

Metrics

You do not have subscription access to this journal. Article level metrics are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access Optica Member Subscription