Abstract

Knowledge of soot particle sizes is important for understanding soot formation and heat transfer in combustion environments. Soot primary particle sizes can be estimated by measuring the decay of time-resolved laser-induced incandescence (TiRe-LII) signals. Existing methods for making planar TiRe-LII measurements require either multiple cameras or time-gate sweeping with multiple laser pulses, making these techniques difficult to apply in turbulent or unsteady combustion environments. Here, we report a technique for planar soot particle sizing using a single high-sensitivity, ultra-high-speed 10 MHz camera with a 50 ns gate and no intensifier. With this method, we demonstrate measurements of background flame luminosity, prompt LII, and TiRe-LII decay signals for particle sizing in a single laser shot. The particle sizing technique is first validated in a laminar non-premixed ethylene flame. Then, the method is applied to measurements in a turbulent ethylene jet flame.

© 2018 Optical Society of America

Two-dimensional soot-particle sizing by time-resolved laser-induced incandescence

Stefan Will, Stephan Schraml, and Alfred Leipertz
Opt. Lett. 20(22) 2342-2344 (1995)

Size distributions of nanoscaled particles and gas temperatures from time-resolved laser-induced-incandescence measurements

Thilo Lehre, Beate Jungfleisch, Rainer Suntz, and Henning Bockhorn
Appl. Opt. 42(12) 2021-2030 (2003)

Laser-induced incandescence for soot diagnostics at high pressures

Max Hofmann, Wolfgang G. Bessler, Christof Schulz, and Helga Jander
Appl. Opt. 42(12) 2052-2062 (2003)

Laser-induced incandescence for soot particle size measurements in premixed flat flames

Boman Axelsson, Robert Collin, and Per-Erik Bengtsson
Appl. Opt. 39(21) 3683-3690 (2000)

Two-dimensional imaging of soot volume fraction by the use of laser-induced incandescence

T. Ni, J. A. Pinson, S. Gupta, and R. J. Santoro
Appl. Opt. 34(30) 7083-7091 (1995)