Singly resonant optical parametric oscillator in periodically poled KTiOPO₄ pumped by a Bessel beam

Abstract

Conical pumping was used in a periodically poled ${\mathrm{KTiOPO}}_4$ optical parametric oscillator for singly resonant idler generation in a nearly diffraction-limited axial beam. A single signal–idler pair was generated over the whole tuning range by use of asymmetric reflectivity of the OPO mirrors. Pump depletion of 40% and total conversion efficiency of 27% were obtained. Additional OPO tuning capability was demonstrated by adjustment of the angle of the conical pump beam.

© 2000 Optical Society of America

Optical parametric oscillator pumped by a Bessel beam

Algis P. Piskarskas, Valerijus Smilgevic̆ius, and Algirdas P. Stabinis
Appl. Opt. 36(30) 7779-7782 (1997)

Continuous-wave, singly-resonant, optical parametric oscillator based on periodically poled KTiOPO₄

T.J. Edwards, G.A. Turnbull, M.H. Dunn, and M. Ebrahimzadeh
Opt. Express 6(3) 58-63 (2000)

Noncollinear double-ring optical parametric oscillators with periodically poled KTiOPO₄

Mikael Tiihonen, Valdas Pasiskevicius, and Fredrik Laurell
Opt. Express 12(22) 5526-5532 (2004)

Single-mode near-infrared optical parametric oscillator amplifier based on periodically poled KTiOPO₄

Glenn W. Baxter, Philip Schlup, Iain T. McKinnie, Jonas Hellström, and Fredrik Laurell
Appl. Opt. 40(36) 6659-6662 (2001)

Femtosecond optical parametric oscillator based on periodically poled KTiOPO₄

Tolga Kartaloǧlu, Kahraman G. Köprülü, Orhan Aytür, Michael Sundheimer, and William P. Risk
Opt. Lett. 23(1) 61-63 (1998)