Abstract

A semiconductor emitter can possibly achieve a sharp cutoff wavelength due to its intrinsic bandgap absorption and almost zero sub-bandgap emission without doping. A germanium-wafer-based selective emitter with front-side antireflection and backside metal coating is studied here for thermophotovoltaic (TPV) energy conversion. Optical simulation predicts the spectral emittance above 0.9 in the wavelengths from 1 to 1.85 µm and below 0.2 in the sub-bandgap range with a sharp cutoff around the bandgap, indicating superior spectral selectivity behavior. This is confirmed by excellent agreement with indirectly measured spectral emittance of the fabricated Ge-based selective emitter sample. Furthermore, the TPV efficiency by pairing the Ge-based selective emitter with a GaSb cell is theoretically analyzed at different temperatures. This Letter facilitates the development of the semiconductor-based selective emitters for enhancing TPV performance.

© 2021 Optical Society of America

Consideration of temperature-dependent emissivity of selective emitters in thermophotovoltaic systems

Rajendra Bhatt, Ivan Kravchenko, and Mool Gupta
Appl. Opt. 59(18) 5457-5462 (2020)

High-efficiency thermophotovoltaic energy conversion enabled by a metamaterial selective emitter

David N. Woolf, Emil A. Kadlec, Don Bethke, Albert D. Grine, John J. Nogan, Jeffrey G. Cederberg, D. Bruce Burckel, Ting Shan Luk, Eric A. Shaner, and Joel M. Hensley
Optica 5(2) 213-218 (2018)

Design and validation of a high-efficiency planar solar thermophotovoltaic system using a spectrally selective emitter

Rajendra Bhatt and Mool Gupta
Opt. Express 28(15) 21869-21890 (2020)

Thermophotovoltaics with spectral and angular selective doped-oxide thermal emitters

Enas Sakr and Peter Bermel
Opt. Express 25(20) A880-A895 (2017)

High efficiency thermophotovoltaic emitter by metamaterial-based nano-pyramid array

Wei Gu, Guihua Tang, and Wenquan Tao
Opt. Express 23(24) 30681-30694 (2015)