Abstract

A 2-μm wavelength laser delivering up to 39-mJ energy, 10ps duration pulses at 100-Hz repetition rate is reported. The system relies on chirped pulse amplification (CPA): a modelocked Er:Tm:Ho fiber-seeder is followed by a Ho:YLF-based regenerative amplifier and a cryogenically cooled Ho:YLF single pass amplifier. Stretching and compressing are performed with large aperture chirped volume Bragg gratings (CVBG). At a peak power of 3.3 GW, the stability was <1%rms over 1 h, confirming high suitability for OPCPA and extreme nonlinear optics applications.

© 2015 Optical Society of America

Full Article  |  PDF Article
More Like This
Table-top high-energy 7  μm OPCPA and 260  mJ Ho:YLF pump laser

U. Elu, T. Steinle, D. Sánchez, L. Maidment, K. Zawilski, P. Schunemann, U. D. Zeitner, C. Simon-Boisson, and J. Biegert
Opt. Lett. 44(13) 3194-3197 (2019)

Ho:YLF chirped pulse amplification at kilohertz repetition rates – 4.3 ps pulses at 2 μm with GW peak power

L. von Grafenstein, M. Bock, D. Ueberschaer, U. Griebner, and T. Elsaesser
Opt. Lett. 41(20) 4668-4671 (2016)

Picosecond 34 mJ pulses at kHz repetition rates from a Ho:YLF amplifier at 2 µm wavelength

Lorenz von Grafenstein, Martin Bock, Dennis Ueberschaer, Uwe Griebner, and Thomas Elsaesser
Opt. Express 23(26) 33142-33149 (2015)

References

You do not have subscription access to this journal. Citation lists with outbound citation links are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access Optica Member Subscription

Cited By

You do not have subscription access to this journal. Cited by links are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access Optica Member Subscription

Figures (5)

You do not have subscription access to this journal. Figure files are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access Optica Member Subscription

Metrics