Abstract

Spatial multiplexer (SMUX) for mode division multiplexing (MDM) has evolved from mode-selective excitation, multiple-spot and photonic-lantern based solutions in order to minimize both mode-dependent loss (MDL) and coupler insertion loss (CIL). This paper discusses the implementation of all the three solutions by compact components in a small footprint. Moreover, the compact SMUX can be manufactured in mass production and packaged to assure high reliability. First, push-pull scheme and center launch based SMUXes are demonstrated on two mostly-popular photonic integration platforms: Silicon-on-insulator (SOI) and Indium Phosphide (InP) for selectively exciting LP01 and LP11 modes. 2-dimensional (2D) top-coupling by using vertical emitters is explored to provide a coupling interface between a few-mode fiber (FMF) and the photonic integrated SMUX. SOI-based grating couplers and InP-based 45° vertical mirrors are proposed and researched as vertical emitters in each platform. Second, a 3-spot SMUX is realized on an InP-based circuit through employing 45° vertical mirrors. Third, as a newly-emerging photonic integration platform, laser-inscribed 3D waveguide (3DW) technology is applied for a fully-packaged dual-channel 6-mode SMUX including two 6-core photonic lantern structures as mode multiplexer and demultiplexer, respectively.

© 2014 Optical Society of America

1. Introduction

The capacity limit of the existing single-mode fiber (SMF) based optical networks due to fiber nonlinearities has been forecasted [1–3]. Spatial division multiplexing (SDM) utilizes the last unexplored physical dimension, space, to avert the network bottleneck looming in the SMF networks [4] and aims to achieve extra high spectral efficiency per fiber. Compared to simply adding parallel SMFs, SDM can be more cost- and energy-efficient through densely integrating transponders, optical amplifiers and other network elements [5,6]. Both mode division multiplexing (MDM) deploying transverse modes guided in few-mode fiber (FMF) and the use of uncoupled fundamental modes or supermodes in multi-core fiber (MCF) are labeled as SDM solutions, which are capable to expand optical fiber capacity by opening the spatial domain next to the wavelength and time domain.

High capacity SDM, combined with WDM transmission trials are listed in Table 1, denoted as number (1) to (10) with an increasing transmission distance. In the top half of the table, all state-of-the-art SDM system trials are realized by MDM. The highest achieved spectral efficiency per fiber core for MDM is 32 bit/s/Hz [7], almost 3 times larger than the maximum capacity that can be offered by an SMF in the same distance. At the end of March 2014, combined SDM and WDM trials with a transmission distance longer than 1000km were only demonstrated with MCFs, listed in the bottom half of the table. Components for MCF based network such as multi-core erbium-doped fiber amplifier (EDFA) [8], MCF compatible reconfigurable optical add/drop multiplexer (ROADM) [9] and MCF loop [10] were demonstrated through directly upgrading the existing SMF based solutions. On the contrary to the MCF trials, although research for few-mode EDFA [11–13], few-mode re-circulation loop [14,15] and low-loss spatial multiplexer (SMUX) [16] achieved big progress recently, non-negligible mode-dependent loss (MDL) and coupler insertion loss (CIL) still exist in these elements, which limit the distance, especially in an accumulated case such as loop measurements. Therefore, it is essential to further explore MDM components with better performance.

Tables Icon

Table 1. High capacity SDM/WDM transmission trials

In this paper, SMUX solutions based on mode-selective excitation, multiple-spot and photonic-lantern are analyzed through matrix representation. All three concepts are researched and experimentally verified with compact SMUX components instead of using bulky optics. First, compact SMUXes which are able to selectively excite LP01 and LP11 modes are demonstrated on both Silicon-on-insulator (SOI) and Indium Phosphide (InP) based circuits. 2-dimensional (2D) top-coupling by using vertical emitters is explored to provide the coupling interface between FMFs and integrated SMUX circuits. SOI-based grating couplers and InP-based 45° vertical mirrors are proposed as vertical emitters in each platform. Moreover, 2D top-coupling layout for selectively exciting four LP modes (LP01, LP11, LP21 and LP02) is proposed and verified by simulations. Second, a 3-spot SMUX is demonstrated on an InP-based circuit, where three 45° vertical mirrors are machined by focused ion beam (FIB) etching. Third, a photonic-lantern based SMUX is demonstrated by laser-inscribed 3D waveguide (3DW) technology. The 3DW device consists of two 6-core photonic-lantern structures for mode multiplexing and demultiplexing and is fully packaged with an FMF and SMF array.

2. Spatial multiplexer (SMUX)

Figure 1 shows the schematic diagram of the SMUX, whose basic functionality is to convert optical powers from a bundle of SMFs into guided modes of an FMF. To discuss and compare different mode multiplexing solutions, matrices are utilized to represent the SMUX, as shown below:

[F1F2FN]F: mode field=[γ1,1γ1,2γ2,1γ2,2γ1,Nγ2,NγN,1γN,2γN,N]Γ: mode conversion[α100α20000αN]A:  internal attenuation[I1I2IN]I: launchfield
where I represents Gaussian-distributed fields from SMFs, F is an array of the fields of fiber modes guided by an FMF and N is the number of total modes. A is a diagonal matrix representing SMUX internal attenuation, which can be caused by splitters inside the device. Γ is the mode conversion matrix, which is quantified with intensity overlap integrals at the coupling plane. The plane locates at the entry facet of the FMF, as shown in Fig. 1. The intensity overlap integral is calculated as:
γi,j=Elaunch,i*Hmode,jdSElaunch,i*Hlaunch,idSEmode,j*Hmode,jdS
where Elaunch,i and Hmode,j are the transverse electric field of the ith launch field at the coupling plane and the transverse magnetic field of the jth fiber mode, respectively. S is the fiber cross-sectional area. The notation * indicates the complex conjugate.

 figure: Fig. 1

Fig. 1 Schematic diagram of the SMUX.

Download Full Size | PPT Slide | PDF

Then, the N × N transfer matrix of the SMUX can be represented as:

H=ΓA

For the purpose to investigate the performance of different kinds of SMUXes, the CIL and MDL are chosen and defined as:

CIL=(λn2)N
MDL=max(λn2)min(λn2)
where λn (n = 1 to N) are singular values of the SMUX transfer matrix H through employing singular value decomposition (SVD).

The phase-plate based SMUX was widely-used [21] and has the advantages such as mode-selective excitation and detection. However, due to the usage of beam combiners, the values of A in Eq. (1) are proportional to N, which results this solution is less scalable to a large mode number. Spot-based SMUX was proposed as a scalable solution, which excites a linear combination of modes instead of one specific mode [22]. Without using the lossy beam combiners, A for the spot-based SMUX can be regarded as an identity matrix and neglected. Therefore, CIL and MDL are determined only by how well spots are arranged. However, unnegligible MDL and CIL still exist for the spot-based SMUX. In order to achieve a potentially lossless solution for mode (de)multiplexing, photonic-lantern based SMUX was proposed [23,24], where N SMFs or waveguides are adiabatically tapered down into a few-mode front-end, guiding N spatial modes. For a photonic-lantern based SMUX, Eq. (1) can be simplified as:

[F1F2FN]=Γ[I1I2IN]=Γ[F1'F2'FN']F:front-endsupermodes
where F’ represents the supermodes at the few-mode front-end. If the supermodes match the guided modes of the FMF, Γ and A in Eq. (3) both become unitary, which gives a unitary H. In this case, lossless mode conversion is realized.

3. Compact solutions for SMUX

In this section, compact SMUX solutions based on mode-selective excitation, multiple-spot and photonic-lantern concepts are presented. Two most popular photonic integration platforms: SOI and InP, and newly-emerging femto-second laser-inscribed 3DW technology are explored for compact SMUXes, which are with small footprints, high reliability and suitable for low-cost device packaging.

3.1 Mode-selective excitation

To selectively launch one specific mode with high coupling efficiency (CE) and low crosstalk to other modes, a field as similar as possible to that of the desired mode needs to be generated [25]. Both amplitude and phase of the generated field determine CE. The LP01 mode field is unipolar, and the LP11 mode has a bipolar field distribution. A push-pull scheme was proposed to excite the LP11 mode where two Gaussian-like spots are used with a phase difference of π [26]. The comparison of the fields of the LP11a mode and the push-pull case is shown in Fig. 2(a). With an extra spot locates at the centre, five spots are able to selectively excite and detect all three spatial modes, see Fig. 2(b). The LP11a and LP11b mode fields are orthogonal, and rotated π/2 with respect to each other in the FMF cross-section area.

 figure: Fig. 2

Fig. 2 (a) Comparison of the fields of the LP11a mode and push-pull case; (b) 5-spot region.

Download Full Size | PPT Slide | PDF

3.1.1 SOI-based grating coupler

Edge-coupling by a spot-size convertor (SSC) or lensed fiber, and top-coupling by a grating coupler are the dominant approaches for coupling between an SOI-based photonic integrated circuit and an SMF. However, it is challenging for the edge-coupling to stack multiple waveguide layers together with a small spacing to realize 2D coupling for SDM, especially for coupling into an FMF, where 2D patterns need to be positioned in a micrometer accuracy. Top-coupling gives more freedom through arranging vertical emitters in 2D. For the purpose of MDM, small grating couplers based on SOI are designed for coupling into FMFs without the use of imaging optics. In order to create a bipolar field for LP11 mode excitation, two 2D grating couplers are driven in a push-pull configuration with opposite phase [26]. To further extend this concept, a full 6-channel integrated SMUX is sketched in Fig. 3(a), where the center 2D grating coupler is for launching or detecting the LP01 mode. The SMUX connects 6 individual SMFs through one-dimensional grating couplers to five 2D grating couplers for FMF coupling. The five small 2D vertical grating couplers excite 6 mode channels: the x- and y-polarization of the LP01 and of the degenerate LP11 modes (LP11a and LP11b). A scanning electron microscope (SEM) image of the region with vertical grating couplers are shown in Fig. 3(b). One integrated SMUX has been packaged with an SMF array for 6 SMF ports and wire-bonded to an electronic circuit, see Fig. 3(c).

 figure: Fig. 3

Fig. 3 (a) Circuit schematics, (b) SEM image of the region of five grating couplers, (c) image of the packaged SOI-based SMUX.

Download Full Size | PPT Slide | PDF

A short step-index (SI) FMF with a core size of 19.4μm is used to test the packaged SMUX. Figure 4(a) shows the launched mode profiles when adding optical power into each SMF input port individually. Voltage is applied to the heater for fine-tuning the phase as launching pure LP11 modes and no phase tuning is needed for LP01 modes excitation. Figure 4(b) shows the measured insertion losses versus wavelength for all 6 channels when the SMUX is used as a mode multiplexer. 20dB insertion loss for the LP01 mode is achieved. The insertion loss for an SMF-to-SMF self-loop including two 1D grating couplers is plotted as a blue curve in Fig. 4(b). It can be calculated that the coupling loss from an SMF to a waveguide via the 1D grating coupler is around 4dB. Besides on-chip losses, main loss comes from the small vertical grating couplers which are with a design of 5 periods. The few period design lowers the light diffraction efficiency of the grating and thus induces a quite high loss. Due to the limited space, the large spacing between the pairs of grating couplers causes more loss for LP11 mode excitation than the LP01 mode excited by the single grating coupler at the centre. By employing the proposed SOI SMUX, 3.072Tb/s (6 spatial and polarization modes×4 WDM×128Gb/s 16QAM) transmission over 30km 3-mode FMF was achieved [27].

 figure: Fig. 4

Fig. 4 (a) Excited mode profiles for all spatial modes in two polarizations and (b) insertion loss for LP01 and LP11 modes versus wavelength.

Download Full Size | PPT Slide | PDF

3.1.2 InP-based 45° vertical mirror

45° vertical mirror based on total internal reflection (TIL) of the surface between a high-index waveguide and air is introduced as a vertical emitter for 2D top-coupling, which is suitable for InP platform. Vertical mirror has a wider bandwidth than the SOI-based grating coupler, which is wavelength dependent due to its periodic structure. The schematic of the 45° mirror is shown in Fig. 5(a). TIR happens at the slanted boundary of air and high-index waveguide. InP-based platform under PARADIGM project [28] is chosen due to its high availability of both active and passive building blocks [29,30]. To deduce the loss from Fresnel diffraction at the top, anti-reflection (AR) layer can be coated. The mirror fabrication is done through focused Ion beam (FIB) etching. The SEM image of a 45° vertical mirror fabricated on an InP waveguide with a width of 4µm is shown in Fig. 5(b). It is measured that coupling loss from the vertical mirror to an SMF is less than 9dB including 1.5dB loss from the Fresnel reflection without the usage of AR coating. Moreover, the power change is less than 0.5dB as varying the state of polarization of input light, which means the mirror is compatible with polarization division multiplexing.

 figure: Fig. 5

Fig. 5 (a) Schematic of the 45° vertical mirror; (b) SEM image of a 45° mirror etched on an InP waveguide.

Download Full Size | PPT Slide | PDF

Figure 6(a) shows the microscope image of a mode-selective excitation SMUX based on InP for LP01 and LP11 modes. The layout of 5 spots, see Fig. 2(b) is realized in the SMUX, where vertical mirrors replace the grating couplers for top-coupling. One mirror located at the center is for launching or detecting LP01 modes. Four mirrors in a outer ring with a radius around 6.8µm are for LP11 modes (LP11a and LP11b) selective excitation. For LP11 mode channel, light is split by a multi-mode interferometer (MMI) based 1×2 splitter. The thermo-optic effect based phase tuner is applied to fine-tune the phase change in one waveguide arm to create the π phase difference for push-pull output. Deeply-etched waveguides with a width of 2µm and etch depth of 1.7µm are used for the mirrors. The mirror machining is done with two FIB fabrication steps: a raw round scan and a fine line scan. It takes 3 minutes for the 1st round scan etching with an acceleration voltage of 30kV and a beam current of 26pA and 4 minutes for the final line scan etching with 9pA. For an SI-FMF with a core diameter of 19.3µm [27], 4% and 7% CE is achieved by simulations for LP01 and LP11 modes, respectively, which results in 3dB MDL and 12 dB CIL. Atoms redeposition on the center waveguide can be observed from the comparison of Figs. 6(b) and 6(c), which is normal in the FIB nanofabrication process. An SEM image of the region with the 5 fabricated mirrors is shown in Fig. 6(d).

 figure: Fig. 6

Fig. 6 (a) Microscope image of an InP-based SMUX circuit; SEM images of the 5-spot region (b) before and (c)-(d) after mirror machining.

Download Full Size | PPT Slide | PDF

3.1.3 High-order modes excitation

This section scales up the mode-selective excitation solution to support four LP modes: LP01, LP11, LP21 and LP02. In the view of spatial modes, there are in total 6 spatial modes which each can have two polarization states, translating into 12 transmission channels.

Figure 7 illustrates the arrangement of 9 spots for selectively exciting each spatial mode which is proposed for the first time. R is the radius of an SI-FMF, guiding 6 spatial modes. All spots have a radius of r and 8 spots are uniformly distributed along a circle with a radius of s. The push-pull scheme is further developed to support LP11 modes, see Figs. 7(b) and 7(c) and LP21 modes, see Figs. 7(d) and 7(e). Unlike the 6-spot arrangement of a spot-based SMUX [31], by using more spots, a high mode extinction ratio is achieved at the same time with excellent mode CE. Due to the circular symmetry of LP01 and LP02 modes, large mode coupling happens with improper launching conditions. Through properly positioning the spots and allocating different intensities and phases to the center spot and outer 8 spots, see Figs. 7(a) and 7(f), the mode profiles of LP01 and LP02 can be nicely matched. In LP01 launch condition, the simulated CE for LP01 and LP02 mode is shown in Fig. 8, with α = 0.28 and variation β and γ1, where α = r/R, β = s/R. γ1 is defined as the ratio of the intensity of each spot arranged in the outer ring to that of the center one. As β = 0.6 and γ1 is around 0.4, >60% LP01 mode CE is achieved and meanwhile no crosstalk to LP02 mode. In LP02 launch condition as shown in Fig. 7(f), >60% CE can also be achieved with β = 0.6 and γ2 = 0.2, see Fig. 9. Figures 10(a) and 10(b) show the CE for LP11a and LP21a mode with corresponding launch condition, respectively, where all the spots share the same intensity but are with different phases. It can be seen that as β = 0.6 and α = 0.28, four LP modes can be selectively excited with around 60% CE, which means less than 2.3dB coupling loss and no mode crosstalk to the other modes in theory due to the mode orthogonality.

 figure: Fig. 7

Fig. 7 The arrangement of 9 spots for selectively exciting each spatial mode.

Download Full Size | PPT Slide | PDF

 figure: Fig. 8

Fig. 8 CE for (a) LP01 and (b) LP02 modes under LP01 launch condition with α = 0.28 and variation β and γ1.

Download Full Size | PPT Slide | PDF

 figure: Fig. 9

Fig. 9 CE for (a) LP01 and (b) LP02 modes under LP02 launch condition with α = 0.28 and variation β and γ2.

Download Full Size | PPT Slide | PDF

 figure: Fig. 10

Fig. 10 CE for (a) LP11a and (b) LP21a modes under corresponding launch condition with variation α and β.

Download Full Size | PPT Slide | PDF

This proposed SMUX has the advantage in mode selectivity at the cost of more complicated circuit design. For simultaneously exciting all modes, optical splitters, phase shifters and combiners are needed to feed each spot with combined optical signals carrying a proper intensity and phase, as illustrated in Fig. 7. To guarantee the high mode extinction ratio, optical fibers or waveguides which deliver the light to the spots cannot couple with each other. SOI- and InP-based optical waveguides are with a high core-cladding index contrast, which enables negligible waveguide crosstalk even in several micrometer gap. Due to the small size of 45° vertical mirrors and premium optical building blocks such as splitters and phase shifters in InP-based platform, InP-based SMUX with 45° vertical mirrors are potentially able to realize the complex structure as shown in Fig. 7.

3.2 Spot-based SMUX

3-spot SMUX is able to provide efficient mode (de)multiplexing for LP01 and LP11 modes through locating 3 launch spots at vertices of an equilateral triangle [32], as shown in Fig. 11(a). The microscope image of a 3-spot SMUX based on InP before mirror etching in FIB post-processing is shown in Fig. 11(b). Left part of the circuit consists of five SSCs for edge-coupling with an SMF array. The purpose of two extreme channels in a loop is to ensure accurate SMF facet alignment. Figure 11(c) shows the SEM image of the merged waveguide region for 3 vertical mirrors. Medium-contrast waveguides with a width of 2µm and etch depth of 0.6µm are used for all three waveguides, which behave single-mode. Top view of the 3-spot region with the etched 45° mirrors is shown in Fig. 11(d). Figure 11(e) gives the SEM image for side view with a tilt of 52°. To acquire best surface roughness for the mirror surface, an acceleration voltage of 30kV and a beam current of 9pA is applied for the 1st round scan etching and the lowest-available beam current of 1.5pA is used for the final line scan etching. The three fabricated 45° vertical mirrors are positioned in a circle with a radius around 3.75µm. With coupling to a low differential-group-delay (DGD) 3-mode FMF [32], it is simulated that the 3-spot SMUX can achieve an MDL of 0.7dB and CIL of 9.8dB. Swept-wavelength interferometer [33] and digital signal processing will be applied to acquire measured results in future work. It should be noticed that Fresnel refraction is not considered on the assumption that AR coating or index-matching epoxy is applied. The MDL and CIL can be further minimized by optimizing the mode profile of the waveguide for mirror machining, which can be realized through modifying waveguide’s layer stack and using adiabatic taper to upscale the waveguide width.

 figure: Fig. 11

Fig. 11 (a) Spots arrangement of a 3-spot SMUX; (b) microscope image of a 3-spot SMUX circuit; SEM images of the 3-spot region (c) before and (d)-(e) after mirror machining.

Download Full Size | PPT Slide | PDF

3.3 3DW photonic-lantern SMUX

In order to achieve a compact and lossless mode (de)multiplexing solution, photonic-lantern based SMUX that merges N single mode waveguides into a few-mode waveguide that supports N spatial modes was proposed in [23] and experimentally verified in [33]. Femto-second laser-inscribed 3DW technology enables inscription of many compact waveguides into a transparent substrate [34], which is ideal to build the photonic-lantern SMUX for coupling between an SMF array on a 1-dimensional pitch to an FMF with a 2D mode pattern [35]. Figures 12(a) and 12(b) show the spot arrangement and the sketch of a 6-core photonic lantern coupling to a 6-mode FMF. In theory optical building blocks such as splitter and arrayed waveguide grating (AWG) can be realized by 3DW technology, which makes this technology potentially can be a photonic integration solution similar as SOI and InP.

 figure: Fig. 12

Fig. 12 (a) Spot arrangement and (b) sketch of a 6-core photonic lantern for mode multiplexing.

Download Full Size | PPT Slide | PDF

In this section, a fully-packaged dual-channel 6-mode SMUX is discussed, which is with two 6-core photonic-lantern structures. Therefore, mode multiplexing and demultiplexing can be realized by a single device. Figure 13(a) shows the sketch of the fully-packaged 6-mode device. Two adiabatically up-tapered 6-mode FMFs with a cladding of 175μm are positioned and assembled in a standard V-groove. SMF array, 3DW device and FMF array are glued together using UV curing epoxy. The mode profile mismatch between the photonic lantern and FMF is solved by up-tapering FMF [35]. The packaged 3DW SMUX has a CIL less than 4dB and an MDL around 3.5dB for each photonic lantern. The picture of the fully-packaged SMUX is shown in Fig. 13(b).

 figure: Fig. 13

Fig. 13 (a) Sketch and (b) picture of the fully-packaged dual-channel 6-mode SMUX realized by 3DW technology.

Download Full Size | PPT Slide | PDF

4. Conclusion

Four different compact SMUXes based on SOI platform, InP platform, and 3DW technology were investigated. To selectively excite LP01 and LP11 modes, a 5-spot layout, extended from the push-pull scheme was realized in both SOI and InP platforms. SOI-based grating couplers and InP-based 45° vertical mirrors were proposed as vertical emitters for FMF-and-circuit vertical coupling. 45° vertical mirrors were machined by FIB etching in post-processing. Subsequently, a 3-spot SMUX was presented based on InP-based 45° vertical mirrors. In order to achieve lossless mode (de)multiplexing, a 3DW SMUX was discussed, which includes two 6-core photonic-lantern structures. The fully-packaged 3DW device gave a measured MDL of 3.5dB and CIL of 4dB for each photonic lantern coupling to an up-tapered 6-mode FMF.

Acknowledgment

This work was supported in part by the European Union FP7 program BROWSE 10015285, the European Union FP7-ICT MODE-GAP project under grant agreement 258033 and the IT R&D program of MKE/KEIT (10043383, Research of Mode-Division Multiplexing Optical Transmission Technology over 10 km Multi-Mode Fiber). We acknowledge help and valuable discussions from Vincent Sleiffer, Barcones Campo, Kevin Williams and Oded Raz with Eindhoven University of Technology; Nicolas K. Fontaine, Roland Ryf with Bell Laboratories, Alcatel-Lucent; Bradley Snyder and Peter O’Brien with Tyndall National Institute, University College Cork. The SOI circuit was fabricated in the framework of ePIXfab set-up by CEA/LETI. The InP circuits were fabricated in PARADIGM multi-project wafer run by Fraunhofer HHI.

References and links

1. R. W. Tkach, “Scaling optical communications for the next decade and beyond,” Bell Labs Tech. J. 14(4), 3–9 (2010). [CrossRef]  

2. A. D. Ellis, “The nonlinear Shannon limit and the need for new fibres,” in (2012), Vol. 8434, p. 84340H–84340H–10.

3. R.-J. Essiambre and R. W. Tkach, “Capacity Trends and Limits of Optical Communication Networks,” Proc. IEEE 100(5), 1035–1055 (2012). [CrossRef]  

4. ModeGap,” http://modegap.eu.

5. P. J. Winzer and G. J. Foschini, “Mode division multiplexed transmission systems,” in Optical Fiber Communication Conference, OSA Technical Digest (online) (Optical Society of America, 2014), p. Th1J.1.

6. P. J. Winzer, “Energy-Efficient Optical Transport Capacity Scaling Through Spatial Multiplexing,” IEEE Photon. Technol. Lett. 23(13), 851–853 (2011). [CrossRef]  

7. R. Ryf, S. Randel, N. K. Fontaine, M. Montoliu, E. Burrows, S. Chandrasekhar, A. H. Gnauck, C. Xie, R.-J. Essiambre, and P. Winzer, “32-bit/s/Hz Spectral Efficiency WDM Transmission over 177-km Few-Mode Fiber,” in Optical Fiber Communication Conference (2013). [CrossRef]  

8. H. Takahashi, T. Tsuritani, E. L. T. de Gabory, T. Ito, W. R. Peng, K. Igarashi, K. Takeshima, Y. Kawaguchi, I. Morita, Y. Tsuchida, Y. Mimura, K. Maeda, T. Saito, K. Watanabe, K. Imamura, R. Sugizaki, and M. Suzuki, “First demonstration of MC-EDFA-repeatered SDM transmission of 40 x 128-Gbit/s PDM-QPSK signals per core over 6,160-km 7-core MCF,” Opt. Express 21(1), 789–795 (2013). [CrossRef]   [PubMed]  

9. M. D. Feuer, L. E. Nelson, K. S. Abedin, X. Zhou, T. F. Taunay, J. F. Fini, B. Zhu, R. Isaac, R. Harel, G. Cohen, and D. M. Marom, “ROADM System for Space Division Multiplexing with Spatial Superchannels,” in Optical Fiber Communication Conference/National Fiber Optic Engineers Conference 2013, OSA Technical Digest (online) (Optical Society of America, 2013), p. PDP5B.8. [CrossRef]  

10. K. Igarashi, T. Tsuritani, I. Morita, Y. Tsuchida, K. Maeda, M. Tadakuma, T. Saito, K. Watanabe, K. Imamura, R. Sugizaki, and M. Suzuki, “1.03-Exabit/skm Super-Nyquist-WDM transmission over 7,326-km seven-core fiber,” in 39th European Conference and Exhibition on Optical Communication (ECOC 2013) (2013), pp. 1–3.

11. V. A. J. M. Sleiffer, Y. Jung, V. Veljanovski, R. G. H. van Uden, M. Kuschnerov, H. Chen, B. Inan, L. G. Nielsen, Y. Sun, D. J. Richardson, S. U. Alam, F. Poletti, J. K. Sahu, A. Dhar, A. M. J. Koonen, B. Corbett, R. Winfield, A. D. Ellis, and H. de Waardt, “73.7 Tb/s (96 x 3 x 256-Gb/s) mode-division-multiplexed DP-16QAM transmission with inline MM-EDFA,” Opt. Express 20(26), B428–B438 (2012). [CrossRef]   [PubMed]  

12. Q. Kang, E. L. Lim, Y. Jung, F. Poletti, S. Alam, and D. J. Richardson, “Design of Four-Mode Erbium Doped Fiber Amplifier with Low Differential Modal Gain for Modal Division Multiplexed Transmissions,” in Optical Fiber Communication Conference/National Fiber Optic Engineers Conference 2013, OSA Technical Digest (online) (Optical Society of America, 2013), p. OTu3G.3. [CrossRef]  

13. Y. Jung, S. Alam, Z. Li, A. Dhar, D. Giles, I. P. Giles, J. K. Sahu, F. Poletti, L. Grüner-Nielsen, and D. J. Richardson, “First demonstration and detailed characterization of a multimode amplifier for space division multiplexed transmission systems,” Opt. Express 19(26), B952–B957 (2011). [CrossRef]   [PubMed]  

14. V. A. J. M. Sleiffer, Y. Jung, M. Kuschnerov, S. U. Alam, D. J. Richardson, L. Grüner-Nielsen, Y. Sun, and H. de Waardt, “Optical chopper-based re-circulating loop for few-mode fiber transmission,” Opt. Lett. 39(5), 1181–1184 (2014). [CrossRef]   [PubMed]  

15. E. Ip, M.-J. Li, K. Bennett, Y.-K. Huang, A. Tanaka, A. Korolev, K. Koreshkov, W. Wood, E. Mateo, J. Hu, and Y. Yano, “146λx6x19-Gbaud Wavelength-and Mode-Division Multiplexed Transmission Over 10x50-km Spans of Few-Mode Fiber With a Gain-Equalized Few-Mode EDFA,” J. Lightwave Technol. 32(4), 790–797 (2014). [CrossRef]  

16. R. Ryf, N. K. Fontaine, M. Montoliu, S. Randel, B. Ercan, H. Chen, S. Chandrasekhar, A. Gnauck, S. G. Leon-Saval, J. Bland-Hawthorn, J. R. Salazar Gil, Y. Sun, and R. Lingle, “Photonic-Lantern-Based Mode Multiplexers for Few-Mode-Fiber Transmission,” in Optical Fiber Communication Conference, OSA Technical Digest (online) (Optical Society of America, 2014), p. W4J.2.

17. E. Ip, M. Li, Y.-K. Huang, A. Tanaka, E. Mateo, W. Wood, J. Hu, Y. Yano, and K. Koreshkov, “146λx6x19-Gbaud Wavelength- and Mode-Division Multiplexed Transmission over 10x50-km Spans of Few-Mode Fiber with a Gain-Equalized Few-Mode EDFA,” in Optical Fiber Communication Conference/National Fiber Optic Engineers Conference 2013, OSA Technical Digest (online) (Optical Society of America, 2013), p. PDP5A.2.

18. T. Kobayashi, H. Takara, A. Sano, T. Mizuno, H. Kawakami, Y. Miyamoto, K. Hiraga, Y. Abe, H. Ono, M. Wada, Y. Sasaki, I. Ishida, K. Takenaga, S. Matsuo, K. Saitoh, M. Yamada, H. Masuda, and T. Morioka, “2 x 344 Tb/s propagation-direction interleaved transmission over 1500-km MCF enhanced by multicarrier full electric-field digital back-propagation,” in 39th European Conference and Exhibition on Optical Communication (ECOC 2013) (2013), pp. 1–3.

19. S. Chandrasekhar, A. H. Gnauck, X. Liu, P. J. Winzer, Y. Pan, E. C. Burrows, T. F. Taunay, B. Zhu, M. Fishteyn, M. F. Yan, J. M. Fini, E. M. Monberg, and F. V. Dimarcello, “WDM/SDM transmission of 10 x 128-Gb/s PDM-QPSK over 2688-km 7-core fiber with a per-fiber net aggregate spectral-efficiency distance product of 40,320 km·b/s/Hz,” Opt. Express 20(2), 706–711 (2012). [CrossRef]   [PubMed]  

20. R. Ryf, R.-J. Essiambre, A. H. Gnauck, S. Randel, M. A. Mestre, C. Schmidt, P. J. Winzer, R. Delbue, P. Pupalaikis, and A. Sureka, “Space-division multiplexed transmission over 4200-km 3-core microstructured fiber,” in Optical Fiber Communication Conference and Exposition (OFC/NFOEC), 2012 and the National Fiber Optic Engineers Conference (2012), pp. 1–3. [CrossRef]  

21. R. Ryf, S. Randel, A. Gnauck, C. Bolle, R. Essiambre, P. J. Winzer, D. W. Peckham, A. McCurdy, and R. Lingle, “Space-division multiplexing over 10 km of three-mode fiber using coherent 6x6 MIMO processing,” in Optical Fiber Communication Conference and Exposition (OFC/NFOEC), 2011 and the National Fiber Optic Engineers Conference (2011), pp. 1–3.

22. R. Ryf, N. K. Fontaine, and R.-J. Essiambre, “Spot-Based Mode Couplers for Mode-Multiplexed Transmission in Few-Mode Fiber,” IEEE Photon. Technol. Lett. 24(21), 1973–1976 (2012). [CrossRef]  

23. N. K. Fontaine, R. Ryf, J. Bland-Hawthorn, and S. G. Leon-Saval, “Geometric requirements for photonic lanterns in space division multiplexing,” Opt. Express 20(24), 27123–27132 (2012). [CrossRef]   [PubMed]  

24. S. Yerolatsitis, I. Gris-Sánchez, and T. A. Birks, “Adiabatically-tapered fiber mode multiplexers,” Opt. Express 22(1), 608–617 (2014). [CrossRef]   [PubMed]  

25. J. Carpenter and T. D. Wilkinson, “Characterization of multimode fiber by selective mode excitation,” J. Lightwave Technol. 30(10), 1386–1392 (2012). [CrossRef]  

26. A. M. J. Koonen, H. Chen, H. P. A. van den Boom, and O. Raz, “Silicon Photonic Integrated Mode Multiplexer and Demultiplexer,” IEEE Photon. Technol. Lett. 24(21), 1961–1964 (2012). [CrossRef]  

27. H. Chen, V. Sleiffer, B. Snyder, M. Kuschnerov, R. van Uden, Y. Jung, C. M. Okonkwo, O. Raz, P. O’Brien, H. de Waardt, and T. Koonen, “Demonstration of a Photonic Integrated Mode Coupler With MDM and WDM Transmission,” IEEE Photon. Technol. Lett. 25(21), 2039–2042 (2013). [CrossRef]  

28. PARADIGM,” http://www.paradigm.jeppix.eu/.

29. M. Wale, J. Van der Tol, X. Leijtens, N. Grote, H. Ambrosius, M. Schell, D. Robbins, M. Smit, and E. Bente, “Generic foundry model for InP-based photonics,” IET Optoelectron. 5(5), 187–194 (2011). [CrossRef]  

30. F. M. Soares, K. Janiak, R. G. Broeke, and N. Grote, “Technology development towards a generic InP-based photonic-integration foundry,” in M. F. Costa, ed. (2011), pp. 800111–800111–7.

31. R. Ryf, N. K. Fontaine, and R.-J. Essiambre, “Spot-based mode coupler for mode-multiplexed transmission in few-mode fiber,” in Photonics Society Summer Topical Meeting Series, 2012 IEEE (2012), pp. 199–200.

32. H. Chen, V. Sleiffer, F. Huijskens, R. van Uden, C. Okonkwo, P. Leoni, M. Kuschnerov, L. Gruner-Nielsen, Y. Sun, H. de Waardt, and T. Koonen, “Employing Prism-Based Three-Spot Mode Couplers for High Capacity MDM/WDM Transmission,” IEEE Photon. Technol. Lett. 25(24), 2474–2477 (2013). [CrossRef]  

33. N. K. Fontaine, “Photonic lantern spatial multiplexers in space-division multiplexing,” in 2013 IEEE Photonics Society Summer Topical Meeting Series (2013), pp. 97–98.

34. K. M. Davis, K. Miura, N. Sugimoto, and K. Hirao, “Writing waveguides in glass with a femtosecond laser,” Opt. Lett. 21(21), 1729–1731 (1996). [CrossRef]   [PubMed]  

35. H. Chen, N. K. Fontaine, R. Ryf, B. Guan, S. J. B. Yoo, and A. M. J. Koonen, “A Fully-packaged 3D-waveguide based Dual-Fiber Spatial-Multiplexer with Up-tapered 6-mode Fiber Pigtails,” in 40th European Conference and Exhibition on Optical Communication (ECOC 2014) (2014), p. We.1.1.4.

References

  • View by:

  1. R. W. Tkach, “Scaling optical communications for the next decade and beyond,” Bell Labs Tech. J. 14(4), 3–9 (2010).
    [Crossref]
  2. A. D. Ellis, “The nonlinear Shannon limit and the need for new fibres,” in (2012), Vol. 8434, p. 84340H–84340H–10.
  3. R.-J. Essiambre and R. W. Tkach, “Capacity Trends and Limits of Optical Communication Networks,” Proc. IEEE 100(5), 1035–1055 (2012).
    [Crossref]
  4. ModeGap,” http://modegap.eu .
  5. P. J. Winzer and G. J. Foschini, “Mode division multiplexed transmission systems,” in Optical Fiber Communication Conference, OSA Technical Digest (online) (Optical Society of America, 2014), p. Th1J.1.
  6. P. J. Winzer, “Energy-Efficient Optical Transport Capacity Scaling Through Spatial Multiplexing,” IEEE Photon. Technol. Lett. 23(13), 851–853 (2011).
    [Crossref]
  7. R. Ryf, S. Randel, N. K. Fontaine, M. Montoliu, E. Burrows, S. Chandrasekhar, A. H. Gnauck, C. Xie, R.-J. Essiambre, and P. Winzer, “32-bit/s/Hz Spectral Efficiency WDM Transmission over 177-km Few-Mode Fiber,” in Optical Fiber Communication Conference (2013).
    [Crossref]
  8. H. Takahashi, T. Tsuritani, E. L. T. de Gabory, T. Ito, W. R. Peng, K. Igarashi, K. Takeshima, Y. Kawaguchi, I. Morita, Y. Tsuchida, Y. Mimura, K. Maeda, T. Saito, K. Watanabe, K. Imamura, R. Sugizaki, and M. Suzuki, “First demonstration of MC-EDFA-repeatered SDM transmission of 40 x 128-Gbit/s PDM-QPSK signals per core over 6,160-km 7-core MCF,” Opt. Express 21(1), 789–795 (2013).
    [Crossref] [PubMed]
  9. M. D. Feuer, L. E. Nelson, K. S. Abedin, X. Zhou, T. F. Taunay, J. F. Fini, B. Zhu, R. Isaac, R. Harel, G. Cohen, and D. M. Marom, “ROADM System for Space Division Multiplexing with Spatial Superchannels,” in Optical Fiber Communication Conference/National Fiber Optic Engineers Conference 2013, OSA Technical Digest (online) (Optical Society of America, 2013), p. PDP5B.8.
    [Crossref]
  10. K. Igarashi, T. Tsuritani, I. Morita, Y. Tsuchida, K. Maeda, M. Tadakuma, T. Saito, K. Watanabe, K. Imamura, R. Sugizaki, and M. Suzuki, “1.03-Exabit/skm Super-Nyquist-WDM transmission over 7,326-km seven-core fiber,” in 39th European Conference and Exhibition on Optical Communication (ECOC 2013) (2013), pp. 1–3.
  11. V. A. J. M. Sleiffer, Y. Jung, V. Veljanovski, R. G. H. van Uden, M. Kuschnerov, H. Chen, B. Inan, L. G. Nielsen, Y. Sun, D. J. Richardson, S. U. Alam, F. Poletti, J. K. Sahu, A. Dhar, A. M. J. Koonen, B. Corbett, R. Winfield, A. D. Ellis, and H. de Waardt, “73.7 Tb/s (96 x 3 x 256-Gb/s) mode-division-multiplexed DP-16QAM transmission with inline MM-EDFA,” Opt. Express 20(26), B428–B438 (2012).
    [Crossref] [PubMed]
  12. Q. Kang, E. L. Lim, Y. Jung, F. Poletti, S. Alam, and D. J. Richardson, “Design of Four-Mode Erbium Doped Fiber Amplifier with Low Differential Modal Gain for Modal Division Multiplexed Transmissions,” in Optical Fiber Communication Conference/National Fiber Optic Engineers Conference 2013, OSA Technical Digest (online) (Optical Society of America, 2013), p. OTu3G.3.
    [Crossref]
  13. Y. Jung, S. Alam, Z. Li, A. Dhar, D. Giles, I. P. Giles, J. K. Sahu, F. Poletti, L. Grüner-Nielsen, and D. J. Richardson, “First demonstration and detailed characterization of a multimode amplifier for space division multiplexed transmission systems,” Opt. Express 19(26), B952–B957 (2011).
    [Crossref] [PubMed]
  14. V. A. J. M. Sleiffer, Y. Jung, M. Kuschnerov, S. U. Alam, D. J. Richardson, L. Grüner-Nielsen, Y. Sun, and H. de Waardt, “Optical chopper-based re-circulating loop for few-mode fiber transmission,” Opt. Lett. 39(5), 1181–1184 (2014).
    [Crossref] [PubMed]
  15. E. Ip, M.-J. Li, K. Bennett, Y.-K. Huang, A. Tanaka, A. Korolev, K. Koreshkov, W. Wood, E. Mateo, J. Hu, and Y. Yano, “146λx6x19-Gbaud Wavelength-and Mode-Division Multiplexed Transmission Over 10x50-km Spans of Few-Mode Fiber With a Gain-Equalized Few-Mode EDFA,” J. Lightwave Technol. 32(4), 790–797 (2014).
    [Crossref]
  16. R. Ryf, N. K. Fontaine, M. Montoliu, S. Randel, B. Ercan, H. Chen, S. Chandrasekhar, A. Gnauck, S. G. Leon-Saval, J. Bland-Hawthorn, J. R. Salazar Gil, Y. Sun, and R. Lingle, “Photonic-Lantern-Based Mode Multiplexers for Few-Mode-Fiber Transmission,” in Optical Fiber Communication Conference, OSA Technical Digest (online) (Optical Society of America, 2014), p. W4J.2.
  17. E. Ip, M. Li, Y.-K. Huang, A. Tanaka, E. Mateo, W. Wood, J. Hu, Y. Yano, and K. Koreshkov, “146λx6x19-Gbaud Wavelength- and Mode-Division Multiplexed Transmission over 10x50-km Spans of Few-Mode Fiber with a Gain-Equalized Few-Mode EDFA,” in Optical Fiber Communication Conference/National Fiber Optic Engineers Conference 2013, OSA Technical Digest (online) (Optical Society of America, 2013), p. PDP5A.2.
  18. T. Kobayashi, H. Takara, A. Sano, T. Mizuno, H. Kawakami, Y. Miyamoto, K. Hiraga, Y. Abe, H. Ono, M. Wada, Y. Sasaki, I. Ishida, K. Takenaga, S. Matsuo, K. Saitoh, M. Yamada, H. Masuda, and T. Morioka, “2 x 344 Tb/s propagation-direction interleaved transmission over 1500-km MCF enhanced by multicarrier full electric-field digital back-propagation,” in 39th European Conference and Exhibition on Optical Communication (ECOC 2013) (2013), pp. 1–3.
  19. S. Chandrasekhar, A. H. Gnauck, X. Liu, P. J. Winzer, Y. Pan, E. C. Burrows, T. F. Taunay, B. Zhu, M. Fishteyn, M. F. Yan, J. M. Fini, E. M. Monberg, and F. V. Dimarcello, “WDM/SDM transmission of 10 x 128-Gb/s PDM-QPSK over 2688-km 7-core fiber with a per-fiber net aggregate spectral-efficiency distance product of 40,320 km·b/s/Hz,” Opt. Express 20(2), 706–711 (2012).
    [Crossref] [PubMed]
  20. R. Ryf, R.-J. Essiambre, A. H. Gnauck, S. Randel, M. A. Mestre, C. Schmidt, P. J. Winzer, R. Delbue, P. Pupalaikis, and A. Sureka, “Space-division multiplexed transmission over 4200-km 3-core microstructured fiber,” in Optical Fiber Communication Conference and Exposition (OFC/NFOEC), 2012 and the National Fiber Optic Engineers Conference (2012), pp. 1–3.
    [Crossref]
  21. R. Ryf, S. Randel, A. Gnauck, C. Bolle, R. Essiambre, P. J. Winzer, D. W. Peckham, A. McCurdy, and R. Lingle, “Space-division multiplexing over 10 km of three-mode fiber using coherent 6x6 MIMO processing,” in Optical Fiber Communication Conference and Exposition (OFC/NFOEC), 2011 and the National Fiber Optic Engineers Conference (2011), pp. 1–3.
  22. R. Ryf, N. K. Fontaine, and R.-J. Essiambre, “Spot-Based Mode Couplers for Mode-Multiplexed Transmission in Few-Mode Fiber,” IEEE Photon. Technol. Lett. 24(21), 1973–1976 (2012).
    [Crossref]
  23. N. K. Fontaine, R. Ryf, J. Bland-Hawthorn, and S. G. Leon-Saval, “Geometric requirements for photonic lanterns in space division multiplexing,” Opt. Express 20(24), 27123–27132 (2012).
    [Crossref] [PubMed]
  24. S. Yerolatsitis, I. Gris-Sánchez, and T. A. Birks, “Adiabatically-tapered fiber mode multiplexers,” Opt. Express 22(1), 608–617 (2014).
    [Crossref] [PubMed]
  25. J. Carpenter and T. D. Wilkinson, “Characterization of multimode fiber by selective mode excitation,” J. Lightwave Technol. 30(10), 1386–1392 (2012).
    [Crossref]
  26. A. M. J. Koonen, H. Chen, H. P. A. van den Boom, and O. Raz, “Silicon Photonic Integrated Mode Multiplexer and Demultiplexer,” IEEE Photon. Technol. Lett. 24(21), 1961–1964 (2012).
    [Crossref]
  27. H. Chen, V. Sleiffer, B. Snyder, M. Kuschnerov, R. van Uden, Y. Jung, C. M. Okonkwo, O. Raz, P. O’Brien, H. de Waardt, and T. Koonen, “Demonstration of a Photonic Integrated Mode Coupler With MDM and WDM Transmission,” IEEE Photon. Technol. Lett. 25(21), 2039–2042 (2013).
    [Crossref]
  28. PARADIGM,” http://www.paradigm.jeppix.eu/ .
  29. M. Wale, J. Van der Tol, X. Leijtens, N. Grote, H. Ambrosius, M. Schell, D. Robbins, M. Smit, and E. Bente, “Generic foundry model for InP-based photonics,” IET Optoelectron. 5(5), 187–194 (2011).
    [Crossref]
  30. F. M. Soares, K. Janiak, R. G. Broeke, and N. Grote, “Technology development towards a generic InP-based photonic-integration foundry,” in M. F. Costa, ed. (2011), pp. 800111–800111–7.
  31. R. Ryf, N. K. Fontaine, and R.-J. Essiambre, “Spot-based mode coupler for mode-multiplexed transmission in few-mode fiber,” in Photonics Society Summer Topical Meeting Series, 2012 IEEE (2012), pp. 199–200.
  32. H. Chen, V. Sleiffer, F. Huijskens, R. van Uden, C. Okonkwo, P. Leoni, M. Kuschnerov, L. Gruner-Nielsen, Y. Sun, H. de Waardt, and T. Koonen, “Employing Prism-Based Three-Spot Mode Couplers for High Capacity MDM/WDM Transmission,” IEEE Photon. Technol. Lett. 25(24), 2474–2477 (2013).
    [Crossref]
  33. N. K. Fontaine, “Photonic lantern spatial multiplexers in space-division multiplexing,” in 2013 IEEE Photonics Society Summer Topical Meeting Series (2013), pp. 97–98.
  34. K. M. Davis, K. Miura, N. Sugimoto, and K. Hirao, “Writing waveguides in glass with a femtosecond laser,” Opt. Lett. 21(21), 1729–1731 (1996).
    [Crossref] [PubMed]
  35. H. Chen, N. K. Fontaine, R. Ryf, B. Guan, S. J. B. Yoo, and A. M. J. Koonen, “A Fully-packaged 3D-waveguide based Dual-Fiber Spatial-Multiplexer with Up-tapered 6-mode Fiber Pigtails,” in 40th European Conference and Exhibition on Optical Communication (ECOC 2014) (2014), p. We.1.1.4.

2014 (3)

2013 (3)

H. Chen, V. Sleiffer, B. Snyder, M. Kuschnerov, R. van Uden, Y. Jung, C. M. Okonkwo, O. Raz, P. O’Brien, H. de Waardt, and T. Koonen, “Demonstration of a Photonic Integrated Mode Coupler With MDM and WDM Transmission,” IEEE Photon. Technol. Lett. 25(21), 2039–2042 (2013).
[Crossref]

H. Chen, V. Sleiffer, F. Huijskens, R. van Uden, C. Okonkwo, P. Leoni, M. Kuschnerov, L. Gruner-Nielsen, Y. Sun, H. de Waardt, and T. Koonen, “Employing Prism-Based Three-Spot Mode Couplers for High Capacity MDM/WDM Transmission,” IEEE Photon. Technol. Lett. 25(24), 2474–2477 (2013).
[Crossref]

H. Takahashi, T. Tsuritani, E. L. T. de Gabory, T. Ito, W. R. Peng, K. Igarashi, K. Takeshima, Y. Kawaguchi, I. Morita, Y. Tsuchida, Y. Mimura, K. Maeda, T. Saito, K. Watanabe, K. Imamura, R. Sugizaki, and M. Suzuki, “First demonstration of MC-EDFA-repeatered SDM transmission of 40 x 128-Gbit/s PDM-QPSK signals per core over 6,160-km 7-core MCF,” Opt. Express 21(1), 789–795 (2013).
[Crossref] [PubMed]

2012 (7)

V. A. J. M. Sleiffer, Y. Jung, V. Veljanovski, R. G. H. van Uden, M. Kuschnerov, H. Chen, B. Inan, L. G. Nielsen, Y. Sun, D. J. Richardson, S. U. Alam, F. Poletti, J. K. Sahu, A. Dhar, A. M. J. Koonen, B. Corbett, R. Winfield, A. D. Ellis, and H. de Waardt, “73.7 Tb/s (96 x 3 x 256-Gb/s) mode-division-multiplexed DP-16QAM transmission with inline MM-EDFA,” Opt. Express 20(26), B428–B438 (2012).
[Crossref] [PubMed]

R.-J. Essiambre and R. W. Tkach, “Capacity Trends and Limits of Optical Communication Networks,” Proc. IEEE 100(5), 1035–1055 (2012).
[Crossref]

S. Chandrasekhar, A. H. Gnauck, X. Liu, P. J. Winzer, Y. Pan, E. C. Burrows, T. F. Taunay, B. Zhu, M. Fishteyn, M. F. Yan, J. M. Fini, E. M. Monberg, and F. V. Dimarcello, “WDM/SDM transmission of 10 x 128-Gb/s PDM-QPSK over 2688-km 7-core fiber with a per-fiber net aggregate spectral-efficiency distance product of 40,320 km·b/s/Hz,” Opt. Express 20(2), 706–711 (2012).
[Crossref] [PubMed]

R. Ryf, N. K. Fontaine, and R.-J. Essiambre, “Spot-Based Mode Couplers for Mode-Multiplexed Transmission in Few-Mode Fiber,” IEEE Photon. Technol. Lett. 24(21), 1973–1976 (2012).
[Crossref]

N. K. Fontaine, R. Ryf, J. Bland-Hawthorn, and S. G. Leon-Saval, “Geometric requirements for photonic lanterns in space division multiplexing,” Opt. Express 20(24), 27123–27132 (2012).
[Crossref] [PubMed]

J. Carpenter and T. D. Wilkinson, “Characterization of multimode fiber by selective mode excitation,” J. Lightwave Technol. 30(10), 1386–1392 (2012).
[Crossref]

A. M. J. Koonen, H. Chen, H. P. A. van den Boom, and O. Raz, “Silicon Photonic Integrated Mode Multiplexer and Demultiplexer,” IEEE Photon. Technol. Lett. 24(21), 1961–1964 (2012).
[Crossref]

2011 (3)

M. Wale, J. Van der Tol, X. Leijtens, N. Grote, H. Ambrosius, M. Schell, D. Robbins, M. Smit, and E. Bente, “Generic foundry model for InP-based photonics,” IET Optoelectron. 5(5), 187–194 (2011).
[Crossref]

P. J. Winzer, “Energy-Efficient Optical Transport Capacity Scaling Through Spatial Multiplexing,” IEEE Photon. Technol. Lett. 23(13), 851–853 (2011).
[Crossref]

Y. Jung, S. Alam, Z. Li, A. Dhar, D. Giles, I. P. Giles, J. K. Sahu, F. Poletti, L. Grüner-Nielsen, and D. J. Richardson, “First demonstration and detailed characterization of a multimode amplifier for space division multiplexed transmission systems,” Opt. Express 19(26), B952–B957 (2011).
[Crossref] [PubMed]

2010 (1)

R. W. Tkach, “Scaling optical communications for the next decade and beyond,” Bell Labs Tech. J. 14(4), 3–9 (2010).
[Crossref]

1996 (1)

Abe, Y.

T. Kobayashi, H. Takara, A. Sano, T. Mizuno, H. Kawakami, Y. Miyamoto, K. Hiraga, Y. Abe, H. Ono, M. Wada, Y. Sasaki, I. Ishida, K. Takenaga, S. Matsuo, K. Saitoh, M. Yamada, H. Masuda, and T. Morioka, “2 x 344 Tb/s propagation-direction interleaved transmission over 1500-km MCF enhanced by multicarrier full electric-field digital back-propagation,” in 39th European Conference and Exhibition on Optical Communication (ECOC 2013) (2013), pp. 1–3.

Alam, S.

Alam, S. U.

Ambrosius, H.

M. Wale, J. Van der Tol, X. Leijtens, N. Grote, H. Ambrosius, M. Schell, D. Robbins, M. Smit, and E. Bente, “Generic foundry model for InP-based photonics,” IET Optoelectron. 5(5), 187–194 (2011).
[Crossref]

Bennett, K.

Bente, E.

M. Wale, J. Van der Tol, X. Leijtens, N. Grote, H. Ambrosius, M. Schell, D. Robbins, M. Smit, and E. Bente, “Generic foundry model for InP-based photonics,” IET Optoelectron. 5(5), 187–194 (2011).
[Crossref]

Birks, T. A.

Bland-Hawthorn, J.

Bolle, C.

R. Ryf, S. Randel, A. Gnauck, C. Bolle, R. Essiambre, P. J. Winzer, D. W. Peckham, A. McCurdy, and R. Lingle, “Space-division multiplexing over 10 km of three-mode fiber using coherent 6x6 MIMO processing,” in Optical Fiber Communication Conference and Exposition (OFC/NFOEC), 2011 and the National Fiber Optic Engineers Conference (2011), pp. 1–3.

Burrows, E.

R. Ryf, S. Randel, N. K. Fontaine, M. Montoliu, E. Burrows, S. Chandrasekhar, A. H. Gnauck, C. Xie, R.-J. Essiambre, and P. Winzer, “32-bit/s/Hz Spectral Efficiency WDM Transmission over 177-km Few-Mode Fiber,” in Optical Fiber Communication Conference (2013).
[Crossref]

Burrows, E. C.

Carpenter, J.

Chandrasekhar, S.

Chen, H.

H. Chen, V. Sleiffer, B. Snyder, M. Kuschnerov, R. van Uden, Y. Jung, C. M. Okonkwo, O. Raz, P. O’Brien, H. de Waardt, and T. Koonen, “Demonstration of a Photonic Integrated Mode Coupler With MDM and WDM Transmission,” IEEE Photon. Technol. Lett. 25(21), 2039–2042 (2013).
[Crossref]

H. Chen, V. Sleiffer, F. Huijskens, R. van Uden, C. Okonkwo, P. Leoni, M. Kuschnerov, L. Gruner-Nielsen, Y. Sun, H. de Waardt, and T. Koonen, “Employing Prism-Based Three-Spot Mode Couplers for High Capacity MDM/WDM Transmission,” IEEE Photon. Technol. Lett. 25(24), 2474–2477 (2013).
[Crossref]

A. M. J. Koonen, H. Chen, H. P. A. van den Boom, and O. Raz, “Silicon Photonic Integrated Mode Multiplexer and Demultiplexer,” IEEE Photon. Technol. Lett. 24(21), 1961–1964 (2012).
[Crossref]

V. A. J. M. Sleiffer, Y. Jung, V. Veljanovski, R. G. H. van Uden, M. Kuschnerov, H. Chen, B. Inan, L. G. Nielsen, Y. Sun, D. J. Richardson, S. U. Alam, F. Poletti, J. K. Sahu, A. Dhar, A. M. J. Koonen, B. Corbett, R. Winfield, A. D. Ellis, and H. de Waardt, “73.7 Tb/s (96 x 3 x 256-Gb/s) mode-division-multiplexed DP-16QAM transmission with inline MM-EDFA,” Opt. Express 20(26), B428–B438 (2012).
[Crossref] [PubMed]

H. Chen, N. K. Fontaine, R. Ryf, B. Guan, S. J. B. Yoo, and A. M. J. Koonen, “A Fully-packaged 3D-waveguide based Dual-Fiber Spatial-Multiplexer with Up-tapered 6-mode Fiber Pigtails,” in 40th European Conference and Exhibition on Optical Communication (ECOC 2014) (2014), p. We.1.1.4.

Corbett, B.

Davis, K. M.

de Gabory, E. L. T.

de Waardt, H.

V. A. J. M. Sleiffer, Y. Jung, M. Kuschnerov, S. U. Alam, D. J. Richardson, L. Grüner-Nielsen, Y. Sun, and H. de Waardt, “Optical chopper-based re-circulating loop for few-mode fiber transmission,” Opt. Lett. 39(5), 1181–1184 (2014).
[Crossref] [PubMed]

H. Chen, V. Sleiffer, F. Huijskens, R. van Uden, C. Okonkwo, P. Leoni, M. Kuschnerov, L. Gruner-Nielsen, Y. Sun, H. de Waardt, and T. Koonen, “Employing Prism-Based Three-Spot Mode Couplers for High Capacity MDM/WDM Transmission,” IEEE Photon. Technol. Lett. 25(24), 2474–2477 (2013).
[Crossref]

H. Chen, V. Sleiffer, B. Snyder, M. Kuschnerov, R. van Uden, Y. Jung, C. M. Okonkwo, O. Raz, P. O’Brien, H. de Waardt, and T. Koonen, “Demonstration of a Photonic Integrated Mode Coupler With MDM and WDM Transmission,” IEEE Photon. Technol. Lett. 25(21), 2039–2042 (2013).
[Crossref]

V. A. J. M. Sleiffer, Y. Jung, V. Veljanovski, R. G. H. van Uden, M. Kuschnerov, H. Chen, B. Inan, L. G. Nielsen, Y. Sun, D. J. Richardson, S. U. Alam, F. Poletti, J. K. Sahu, A. Dhar, A. M. J. Koonen, B. Corbett, R. Winfield, A. D. Ellis, and H. de Waardt, “73.7 Tb/s (96 x 3 x 256-Gb/s) mode-division-multiplexed DP-16QAM transmission with inline MM-EDFA,” Opt. Express 20(26), B428–B438 (2012).
[Crossref] [PubMed]

Delbue, R.

R. Ryf, R.-J. Essiambre, A. H. Gnauck, S. Randel, M. A. Mestre, C. Schmidt, P. J. Winzer, R. Delbue, P. Pupalaikis, and A. Sureka, “Space-division multiplexed transmission over 4200-km 3-core microstructured fiber,” in Optical Fiber Communication Conference and Exposition (OFC/NFOEC), 2012 and the National Fiber Optic Engineers Conference (2012), pp. 1–3.
[Crossref]

Dhar, A.

Dimarcello, F. V.

Ellis, A. D.

Essiambre, R.

R. Ryf, S. Randel, A. Gnauck, C. Bolle, R. Essiambre, P. J. Winzer, D. W. Peckham, A. McCurdy, and R. Lingle, “Space-division multiplexing over 10 km of three-mode fiber using coherent 6x6 MIMO processing,” in Optical Fiber Communication Conference and Exposition (OFC/NFOEC), 2011 and the National Fiber Optic Engineers Conference (2011), pp. 1–3.

Essiambre, R.-J.

R. Ryf, N. K. Fontaine, and R.-J. Essiambre, “Spot-Based Mode Couplers for Mode-Multiplexed Transmission in Few-Mode Fiber,” IEEE Photon. Technol. Lett. 24(21), 1973–1976 (2012).
[Crossref]

R.-J. Essiambre and R. W. Tkach, “Capacity Trends and Limits of Optical Communication Networks,” Proc. IEEE 100(5), 1035–1055 (2012).
[Crossref]

R. Ryf, S. Randel, N. K. Fontaine, M. Montoliu, E. Burrows, S. Chandrasekhar, A. H. Gnauck, C. Xie, R.-J. Essiambre, and P. Winzer, “32-bit/s/Hz Spectral Efficiency WDM Transmission over 177-km Few-Mode Fiber,” in Optical Fiber Communication Conference (2013).
[Crossref]

R. Ryf, R.-J. Essiambre, A. H. Gnauck, S. Randel, M. A. Mestre, C. Schmidt, P. J. Winzer, R. Delbue, P. Pupalaikis, and A. Sureka, “Space-division multiplexed transmission over 4200-km 3-core microstructured fiber,” in Optical Fiber Communication Conference and Exposition (OFC/NFOEC), 2012 and the National Fiber Optic Engineers Conference (2012), pp. 1–3.
[Crossref]

Fini, J. M.

Fishteyn, M.

Fontaine, N. K.

N. K. Fontaine, R. Ryf, J. Bland-Hawthorn, and S. G. Leon-Saval, “Geometric requirements for photonic lanterns in space division multiplexing,” Opt. Express 20(24), 27123–27132 (2012).
[Crossref] [PubMed]

R. Ryf, N. K. Fontaine, and R.-J. Essiambre, “Spot-Based Mode Couplers for Mode-Multiplexed Transmission in Few-Mode Fiber,” IEEE Photon. Technol. Lett. 24(21), 1973–1976 (2012).
[Crossref]

H. Chen, N. K. Fontaine, R. Ryf, B. Guan, S. J. B. Yoo, and A. M. J. Koonen, “A Fully-packaged 3D-waveguide based Dual-Fiber Spatial-Multiplexer with Up-tapered 6-mode Fiber Pigtails,” in 40th European Conference and Exhibition on Optical Communication (ECOC 2014) (2014), p. We.1.1.4.

R. Ryf, S. Randel, N. K. Fontaine, M. Montoliu, E. Burrows, S. Chandrasekhar, A. H. Gnauck, C. Xie, R.-J. Essiambre, and P. Winzer, “32-bit/s/Hz Spectral Efficiency WDM Transmission over 177-km Few-Mode Fiber,” in Optical Fiber Communication Conference (2013).
[Crossref]

Giles, D.

Giles, I. P.

Gnauck, A.

R. Ryf, S. Randel, A. Gnauck, C. Bolle, R. Essiambre, P. J. Winzer, D. W. Peckham, A. McCurdy, and R. Lingle, “Space-division multiplexing over 10 km of three-mode fiber using coherent 6x6 MIMO processing,” in Optical Fiber Communication Conference and Exposition (OFC/NFOEC), 2011 and the National Fiber Optic Engineers Conference (2011), pp. 1–3.

Gnauck, A. H.

S. Chandrasekhar, A. H. Gnauck, X. Liu, P. J. Winzer, Y. Pan, E. C. Burrows, T. F. Taunay, B. Zhu, M. Fishteyn, M. F. Yan, J. M. Fini, E. M. Monberg, and F. V. Dimarcello, “WDM/SDM transmission of 10 x 128-Gb/s PDM-QPSK over 2688-km 7-core fiber with a per-fiber net aggregate spectral-efficiency distance product of 40,320 km·b/s/Hz,” Opt. Express 20(2), 706–711 (2012).
[Crossref] [PubMed]

R. Ryf, R.-J. Essiambre, A. H. Gnauck, S. Randel, M. A. Mestre, C. Schmidt, P. J. Winzer, R. Delbue, P. Pupalaikis, and A. Sureka, “Space-division multiplexed transmission over 4200-km 3-core microstructured fiber,” in Optical Fiber Communication Conference and Exposition (OFC/NFOEC), 2012 and the National Fiber Optic Engineers Conference (2012), pp. 1–3.
[Crossref]

R. Ryf, S. Randel, N. K. Fontaine, M. Montoliu, E. Burrows, S. Chandrasekhar, A. H. Gnauck, C. Xie, R.-J. Essiambre, and P. Winzer, “32-bit/s/Hz Spectral Efficiency WDM Transmission over 177-km Few-Mode Fiber,” in Optical Fiber Communication Conference (2013).
[Crossref]

Gris-Sánchez, I.

Grote, N.

M. Wale, J. Van der Tol, X. Leijtens, N. Grote, H. Ambrosius, M. Schell, D. Robbins, M. Smit, and E. Bente, “Generic foundry model for InP-based photonics,” IET Optoelectron. 5(5), 187–194 (2011).
[Crossref]

Gruner-Nielsen, L.

H. Chen, V. Sleiffer, F. Huijskens, R. van Uden, C. Okonkwo, P. Leoni, M. Kuschnerov, L. Gruner-Nielsen, Y. Sun, H. de Waardt, and T. Koonen, “Employing Prism-Based Three-Spot Mode Couplers for High Capacity MDM/WDM Transmission,” IEEE Photon. Technol. Lett. 25(24), 2474–2477 (2013).
[Crossref]

Grüner-Nielsen, L.

Guan, B.

H. Chen, N. K. Fontaine, R. Ryf, B. Guan, S. J. B. Yoo, and A. M. J. Koonen, “A Fully-packaged 3D-waveguide based Dual-Fiber Spatial-Multiplexer with Up-tapered 6-mode Fiber Pigtails,” in 40th European Conference and Exhibition on Optical Communication (ECOC 2014) (2014), p. We.1.1.4.

Hiraga, K.

T. Kobayashi, H. Takara, A. Sano, T. Mizuno, H. Kawakami, Y. Miyamoto, K. Hiraga, Y. Abe, H. Ono, M. Wada, Y. Sasaki, I. Ishida, K. Takenaga, S. Matsuo, K. Saitoh, M. Yamada, H. Masuda, and T. Morioka, “2 x 344 Tb/s propagation-direction interleaved transmission over 1500-km MCF enhanced by multicarrier full electric-field digital back-propagation,” in 39th European Conference and Exhibition on Optical Communication (ECOC 2013) (2013), pp. 1–3.

Hirao, K.

Hu, J.

Huang, Y.-K.

Huijskens, F.

H. Chen, V. Sleiffer, F. Huijskens, R. van Uden, C. Okonkwo, P. Leoni, M. Kuschnerov, L. Gruner-Nielsen, Y. Sun, H. de Waardt, and T. Koonen, “Employing Prism-Based Three-Spot Mode Couplers for High Capacity MDM/WDM Transmission,” IEEE Photon. Technol. Lett. 25(24), 2474–2477 (2013).
[Crossref]

Igarashi, K.

H. Takahashi, T. Tsuritani, E. L. T. de Gabory, T. Ito, W. R. Peng, K. Igarashi, K. Takeshima, Y. Kawaguchi, I. Morita, Y. Tsuchida, Y. Mimura, K. Maeda, T. Saito, K. Watanabe, K. Imamura, R. Sugizaki, and M. Suzuki, “First demonstration of MC-EDFA-repeatered SDM transmission of 40 x 128-Gbit/s PDM-QPSK signals per core over 6,160-km 7-core MCF,” Opt. Express 21(1), 789–795 (2013).
[Crossref] [PubMed]

K. Igarashi, T. Tsuritani, I. Morita, Y. Tsuchida, K. Maeda, M. Tadakuma, T. Saito, K. Watanabe, K. Imamura, R. Sugizaki, and M. Suzuki, “1.03-Exabit/skm Super-Nyquist-WDM transmission over 7,326-km seven-core fiber,” in 39th European Conference and Exhibition on Optical Communication (ECOC 2013) (2013), pp. 1–3.

Imamura, K.

H. Takahashi, T. Tsuritani, E. L. T. de Gabory, T. Ito, W. R. Peng, K. Igarashi, K. Takeshima, Y. Kawaguchi, I. Morita, Y. Tsuchida, Y. Mimura, K. Maeda, T. Saito, K. Watanabe, K. Imamura, R. Sugizaki, and M. Suzuki, “First demonstration of MC-EDFA-repeatered SDM transmission of 40 x 128-Gbit/s PDM-QPSK signals per core over 6,160-km 7-core MCF,” Opt. Express 21(1), 789–795 (2013).
[Crossref] [PubMed]

K. Igarashi, T. Tsuritani, I. Morita, Y. Tsuchida, K. Maeda, M. Tadakuma, T. Saito, K. Watanabe, K. Imamura, R. Sugizaki, and M. Suzuki, “1.03-Exabit/skm Super-Nyquist-WDM transmission over 7,326-km seven-core fiber,” in 39th European Conference and Exhibition on Optical Communication (ECOC 2013) (2013), pp. 1–3.

Inan, B.

Ip, E.

Ishida, I.

T. Kobayashi, H. Takara, A. Sano, T. Mizuno, H. Kawakami, Y. Miyamoto, K. Hiraga, Y. Abe, H. Ono, M. Wada, Y. Sasaki, I. Ishida, K. Takenaga, S. Matsuo, K. Saitoh, M. Yamada, H. Masuda, and T. Morioka, “2 x 344 Tb/s propagation-direction interleaved transmission over 1500-km MCF enhanced by multicarrier full electric-field digital back-propagation,” in 39th European Conference and Exhibition on Optical Communication (ECOC 2013) (2013), pp. 1–3.

Ito, T.

Jung, Y.

Kawaguchi, Y.

Kawakami, H.

T. Kobayashi, H. Takara, A. Sano, T. Mizuno, H. Kawakami, Y. Miyamoto, K. Hiraga, Y. Abe, H. Ono, M. Wada, Y. Sasaki, I. Ishida, K. Takenaga, S. Matsuo, K. Saitoh, M. Yamada, H. Masuda, and T. Morioka, “2 x 344 Tb/s propagation-direction interleaved transmission over 1500-km MCF enhanced by multicarrier full electric-field digital back-propagation,” in 39th European Conference and Exhibition on Optical Communication (ECOC 2013) (2013), pp. 1–3.

Kobayashi, T.

T. Kobayashi, H. Takara, A. Sano, T. Mizuno, H. Kawakami, Y. Miyamoto, K. Hiraga, Y. Abe, H. Ono, M. Wada, Y. Sasaki, I. Ishida, K. Takenaga, S. Matsuo, K. Saitoh, M. Yamada, H. Masuda, and T. Morioka, “2 x 344 Tb/s propagation-direction interleaved transmission over 1500-km MCF enhanced by multicarrier full electric-field digital back-propagation,” in 39th European Conference and Exhibition on Optical Communication (ECOC 2013) (2013), pp. 1–3.

Koonen, A. M. J.

V. A. J. M. Sleiffer, Y. Jung, V. Veljanovski, R. G. H. van Uden, M. Kuschnerov, H. Chen, B. Inan, L. G. Nielsen, Y. Sun, D. J. Richardson, S. U. Alam, F. Poletti, J. K. Sahu, A. Dhar, A. M. J. Koonen, B. Corbett, R. Winfield, A. D. Ellis, and H. de Waardt, “73.7 Tb/s (96 x 3 x 256-Gb/s) mode-division-multiplexed DP-16QAM transmission with inline MM-EDFA,” Opt. Express 20(26), B428–B438 (2012).
[Crossref] [PubMed]

A. M. J. Koonen, H. Chen, H. P. A. van den Boom, and O. Raz, “Silicon Photonic Integrated Mode Multiplexer and Demultiplexer,” IEEE Photon. Technol. Lett. 24(21), 1961–1964 (2012).
[Crossref]

H. Chen, N. K. Fontaine, R. Ryf, B. Guan, S. J. B. Yoo, and A. M. J. Koonen, “A Fully-packaged 3D-waveguide based Dual-Fiber Spatial-Multiplexer with Up-tapered 6-mode Fiber Pigtails,” in 40th European Conference and Exhibition on Optical Communication (ECOC 2014) (2014), p. We.1.1.4.

Koonen, T.

H. Chen, V. Sleiffer, F. Huijskens, R. van Uden, C. Okonkwo, P. Leoni, M. Kuschnerov, L. Gruner-Nielsen, Y. Sun, H. de Waardt, and T. Koonen, “Employing Prism-Based Three-Spot Mode Couplers for High Capacity MDM/WDM Transmission,” IEEE Photon. Technol. Lett. 25(24), 2474–2477 (2013).
[Crossref]

H. Chen, V. Sleiffer, B. Snyder, M. Kuschnerov, R. van Uden, Y. Jung, C. M. Okonkwo, O. Raz, P. O’Brien, H. de Waardt, and T. Koonen, “Demonstration of a Photonic Integrated Mode Coupler With MDM and WDM Transmission,” IEEE Photon. Technol. Lett. 25(21), 2039–2042 (2013).
[Crossref]

Koreshkov, K.

Korolev, A.

Kuschnerov, M.

V. A. J. M. Sleiffer, Y. Jung, M. Kuschnerov, S. U. Alam, D. J. Richardson, L. Grüner-Nielsen, Y. Sun, and H. de Waardt, “Optical chopper-based re-circulating loop for few-mode fiber transmission,” Opt. Lett. 39(5), 1181–1184 (2014).
[Crossref] [PubMed]

H. Chen, V. Sleiffer, B. Snyder, M. Kuschnerov, R. van Uden, Y. Jung, C. M. Okonkwo, O. Raz, P. O’Brien, H. de Waardt, and T. Koonen, “Demonstration of a Photonic Integrated Mode Coupler With MDM and WDM Transmission,” IEEE Photon. Technol. Lett. 25(21), 2039–2042 (2013).
[Crossref]

H. Chen, V. Sleiffer, F. Huijskens, R. van Uden, C. Okonkwo, P. Leoni, M. Kuschnerov, L. Gruner-Nielsen, Y. Sun, H. de Waardt, and T. Koonen, “Employing Prism-Based Three-Spot Mode Couplers for High Capacity MDM/WDM Transmission,” IEEE Photon. Technol. Lett. 25(24), 2474–2477 (2013).
[Crossref]

V. A. J. M. Sleiffer, Y. Jung, V. Veljanovski, R. G. H. van Uden, M. Kuschnerov, H. Chen, B. Inan, L. G. Nielsen, Y. Sun, D. J. Richardson, S. U. Alam, F. Poletti, J. K. Sahu, A. Dhar, A. M. J. Koonen, B. Corbett, R. Winfield, A. D. Ellis, and H. de Waardt, “73.7 Tb/s (96 x 3 x 256-Gb/s) mode-division-multiplexed DP-16QAM transmission with inline MM-EDFA,” Opt. Express 20(26), B428–B438 (2012).
[Crossref] [PubMed]

Leijtens, X.

M. Wale, J. Van der Tol, X. Leijtens, N. Grote, H. Ambrosius, M. Schell, D. Robbins, M. Smit, and E. Bente, “Generic foundry model for InP-based photonics,” IET Optoelectron. 5(5), 187–194 (2011).
[Crossref]

Leoni, P.

H. Chen, V. Sleiffer, F. Huijskens, R. van Uden, C. Okonkwo, P. Leoni, M. Kuschnerov, L. Gruner-Nielsen, Y. Sun, H. de Waardt, and T. Koonen, “Employing Prism-Based Three-Spot Mode Couplers for High Capacity MDM/WDM Transmission,” IEEE Photon. Technol. Lett. 25(24), 2474–2477 (2013).
[Crossref]

Leon-Saval, S. G.

Li, M.-J.

Li, Z.

Lingle, R.

R. Ryf, S. Randel, A. Gnauck, C. Bolle, R. Essiambre, P. J. Winzer, D. W. Peckham, A. McCurdy, and R. Lingle, “Space-division multiplexing over 10 km of three-mode fiber using coherent 6x6 MIMO processing,” in Optical Fiber Communication Conference and Exposition (OFC/NFOEC), 2011 and the National Fiber Optic Engineers Conference (2011), pp. 1–3.

Liu, X.

Maeda, K.

H. Takahashi, T. Tsuritani, E. L. T. de Gabory, T. Ito, W. R. Peng, K. Igarashi, K. Takeshima, Y. Kawaguchi, I. Morita, Y. Tsuchida, Y. Mimura, K. Maeda, T. Saito, K. Watanabe, K. Imamura, R. Sugizaki, and M. Suzuki, “First demonstration of MC-EDFA-repeatered SDM transmission of 40 x 128-Gbit/s PDM-QPSK signals per core over 6,160-km 7-core MCF,” Opt. Express 21(1), 789–795 (2013).
[Crossref] [PubMed]

K. Igarashi, T. Tsuritani, I. Morita, Y. Tsuchida, K. Maeda, M. Tadakuma, T. Saito, K. Watanabe, K. Imamura, R. Sugizaki, and M. Suzuki, “1.03-Exabit/skm Super-Nyquist-WDM transmission over 7,326-km seven-core fiber,” in 39th European Conference and Exhibition on Optical Communication (ECOC 2013) (2013), pp. 1–3.

Masuda, H.

T. Kobayashi, H. Takara, A. Sano, T. Mizuno, H. Kawakami, Y. Miyamoto, K. Hiraga, Y. Abe, H. Ono, M. Wada, Y. Sasaki, I. Ishida, K. Takenaga, S. Matsuo, K. Saitoh, M. Yamada, H. Masuda, and T. Morioka, “2 x 344 Tb/s propagation-direction interleaved transmission over 1500-km MCF enhanced by multicarrier full electric-field digital back-propagation,” in 39th European Conference and Exhibition on Optical Communication (ECOC 2013) (2013), pp. 1–3.

Mateo, E.

Matsuo, S.

T. Kobayashi, H. Takara, A. Sano, T. Mizuno, H. Kawakami, Y. Miyamoto, K. Hiraga, Y. Abe, H. Ono, M. Wada, Y. Sasaki, I. Ishida, K. Takenaga, S. Matsuo, K. Saitoh, M. Yamada, H. Masuda, and T. Morioka, “2 x 344 Tb/s propagation-direction interleaved transmission over 1500-km MCF enhanced by multicarrier full electric-field digital back-propagation,” in 39th European Conference and Exhibition on Optical Communication (ECOC 2013) (2013), pp. 1–3.

McCurdy, A.

R. Ryf, S. Randel, A. Gnauck, C. Bolle, R. Essiambre, P. J. Winzer, D. W. Peckham, A. McCurdy, and R. Lingle, “Space-division multiplexing over 10 km of three-mode fiber using coherent 6x6 MIMO processing,” in Optical Fiber Communication Conference and Exposition (OFC/NFOEC), 2011 and the National Fiber Optic Engineers Conference (2011), pp. 1–3.

Mestre, M. A.

R. Ryf, R.-J. Essiambre, A. H. Gnauck, S. Randel, M. A. Mestre, C. Schmidt, P. J. Winzer, R. Delbue, P. Pupalaikis, and A. Sureka, “Space-division multiplexed transmission over 4200-km 3-core microstructured fiber,” in Optical Fiber Communication Conference and Exposition (OFC/NFOEC), 2012 and the National Fiber Optic Engineers Conference (2012), pp. 1–3.
[Crossref]

Mimura, Y.

Miura, K.

Miyamoto, Y.

T. Kobayashi, H. Takara, A. Sano, T. Mizuno, H. Kawakami, Y. Miyamoto, K. Hiraga, Y. Abe, H. Ono, M. Wada, Y. Sasaki, I. Ishida, K. Takenaga, S. Matsuo, K. Saitoh, M. Yamada, H. Masuda, and T. Morioka, “2 x 344 Tb/s propagation-direction interleaved transmission over 1500-km MCF enhanced by multicarrier full electric-field digital back-propagation,” in 39th European Conference and Exhibition on Optical Communication (ECOC 2013) (2013), pp. 1–3.

Mizuno, T.

T. Kobayashi, H. Takara, A. Sano, T. Mizuno, H. Kawakami, Y. Miyamoto, K. Hiraga, Y. Abe, H. Ono, M. Wada, Y. Sasaki, I. Ishida, K. Takenaga, S. Matsuo, K. Saitoh, M. Yamada, H. Masuda, and T. Morioka, “2 x 344 Tb/s propagation-direction interleaved transmission over 1500-km MCF enhanced by multicarrier full electric-field digital back-propagation,” in 39th European Conference and Exhibition on Optical Communication (ECOC 2013) (2013), pp. 1–3.

Monberg, E. M.

Montoliu, M.

R. Ryf, S. Randel, N. K. Fontaine, M. Montoliu, E. Burrows, S. Chandrasekhar, A. H. Gnauck, C. Xie, R.-J. Essiambre, and P. Winzer, “32-bit/s/Hz Spectral Efficiency WDM Transmission over 177-km Few-Mode Fiber,” in Optical Fiber Communication Conference (2013).
[Crossref]

Morioka, T.

T. Kobayashi, H. Takara, A. Sano, T. Mizuno, H. Kawakami, Y. Miyamoto, K. Hiraga, Y. Abe, H. Ono, M. Wada, Y. Sasaki, I. Ishida, K. Takenaga, S. Matsuo, K. Saitoh, M. Yamada, H. Masuda, and T. Morioka, “2 x 344 Tb/s propagation-direction interleaved transmission over 1500-km MCF enhanced by multicarrier full electric-field digital back-propagation,” in 39th European Conference and Exhibition on Optical Communication (ECOC 2013) (2013), pp. 1–3.

Morita, I.

H. Takahashi, T. Tsuritani, E. L. T. de Gabory, T. Ito, W. R. Peng, K. Igarashi, K. Takeshima, Y. Kawaguchi, I. Morita, Y. Tsuchida, Y. Mimura, K. Maeda, T. Saito, K. Watanabe, K. Imamura, R. Sugizaki, and M. Suzuki, “First demonstration of MC-EDFA-repeatered SDM transmission of 40 x 128-Gbit/s PDM-QPSK signals per core over 6,160-km 7-core MCF,” Opt. Express 21(1), 789–795 (2013).
[Crossref] [PubMed]

K. Igarashi, T. Tsuritani, I. Morita, Y. Tsuchida, K. Maeda, M. Tadakuma, T. Saito, K. Watanabe, K. Imamura, R. Sugizaki, and M. Suzuki, “1.03-Exabit/skm Super-Nyquist-WDM transmission over 7,326-km seven-core fiber,” in 39th European Conference and Exhibition on Optical Communication (ECOC 2013) (2013), pp. 1–3.

Nielsen, L. G.

O’Brien, P.

H. Chen, V. Sleiffer, B. Snyder, M. Kuschnerov, R. van Uden, Y. Jung, C. M. Okonkwo, O. Raz, P. O’Brien, H. de Waardt, and T. Koonen, “Demonstration of a Photonic Integrated Mode Coupler With MDM and WDM Transmission,” IEEE Photon. Technol. Lett. 25(21), 2039–2042 (2013).
[Crossref]

Okonkwo, C.

H. Chen, V. Sleiffer, F. Huijskens, R. van Uden, C. Okonkwo, P. Leoni, M. Kuschnerov, L. Gruner-Nielsen, Y. Sun, H. de Waardt, and T. Koonen, “Employing Prism-Based Three-Spot Mode Couplers for High Capacity MDM/WDM Transmission,” IEEE Photon. Technol. Lett. 25(24), 2474–2477 (2013).
[Crossref]

Okonkwo, C. M.

H. Chen, V. Sleiffer, B. Snyder, M. Kuschnerov, R. van Uden, Y. Jung, C. M. Okonkwo, O. Raz, P. O’Brien, H. de Waardt, and T. Koonen, “Demonstration of a Photonic Integrated Mode Coupler With MDM and WDM Transmission,” IEEE Photon. Technol. Lett. 25(21), 2039–2042 (2013).
[Crossref]

Ono, H.

T. Kobayashi, H. Takara, A. Sano, T. Mizuno, H. Kawakami, Y. Miyamoto, K. Hiraga, Y. Abe, H. Ono, M. Wada, Y. Sasaki, I. Ishida, K. Takenaga, S. Matsuo, K. Saitoh, M. Yamada, H. Masuda, and T. Morioka, “2 x 344 Tb/s propagation-direction interleaved transmission over 1500-km MCF enhanced by multicarrier full electric-field digital back-propagation,” in 39th European Conference and Exhibition on Optical Communication (ECOC 2013) (2013), pp. 1–3.

Pan, Y.

Peckham, D. W.

R. Ryf, S. Randel, A. Gnauck, C. Bolle, R. Essiambre, P. J. Winzer, D. W. Peckham, A. McCurdy, and R. Lingle, “Space-division multiplexing over 10 km of three-mode fiber using coherent 6x6 MIMO processing,” in Optical Fiber Communication Conference and Exposition (OFC/NFOEC), 2011 and the National Fiber Optic Engineers Conference (2011), pp. 1–3.

Peng, W. R.

Poletti, F.

Pupalaikis, P.

R. Ryf, R.-J. Essiambre, A. H. Gnauck, S. Randel, M. A. Mestre, C. Schmidt, P. J. Winzer, R. Delbue, P. Pupalaikis, and A. Sureka, “Space-division multiplexed transmission over 4200-km 3-core microstructured fiber,” in Optical Fiber Communication Conference and Exposition (OFC/NFOEC), 2012 and the National Fiber Optic Engineers Conference (2012), pp. 1–3.
[Crossref]

Randel, S.

R. Ryf, S. Randel, A. Gnauck, C. Bolle, R. Essiambre, P. J. Winzer, D. W. Peckham, A. McCurdy, and R. Lingle, “Space-division multiplexing over 10 km of three-mode fiber using coherent 6x6 MIMO processing,” in Optical Fiber Communication Conference and Exposition (OFC/NFOEC), 2011 and the National Fiber Optic Engineers Conference (2011), pp. 1–3.

R. Ryf, R.-J. Essiambre, A. H. Gnauck, S. Randel, M. A. Mestre, C. Schmidt, P. J. Winzer, R. Delbue, P. Pupalaikis, and A. Sureka, “Space-division multiplexed transmission over 4200-km 3-core microstructured fiber,” in Optical Fiber Communication Conference and Exposition (OFC/NFOEC), 2012 and the National Fiber Optic Engineers Conference (2012), pp. 1–3.
[Crossref]

R. Ryf, S. Randel, N. K. Fontaine, M. Montoliu, E. Burrows, S. Chandrasekhar, A. H. Gnauck, C. Xie, R.-J. Essiambre, and P. Winzer, “32-bit/s/Hz Spectral Efficiency WDM Transmission over 177-km Few-Mode Fiber,” in Optical Fiber Communication Conference (2013).
[Crossref]

Raz, O.

H. Chen, V. Sleiffer, B. Snyder, M. Kuschnerov, R. van Uden, Y. Jung, C. M. Okonkwo, O. Raz, P. O’Brien, H. de Waardt, and T. Koonen, “Demonstration of a Photonic Integrated Mode Coupler With MDM and WDM Transmission,” IEEE Photon. Technol. Lett. 25(21), 2039–2042 (2013).
[Crossref]

A. M. J. Koonen, H. Chen, H. P. A. van den Boom, and O. Raz, “Silicon Photonic Integrated Mode Multiplexer and Demultiplexer,” IEEE Photon. Technol. Lett. 24(21), 1961–1964 (2012).
[Crossref]

Richardson, D. J.

Robbins, D.

M. Wale, J. Van der Tol, X. Leijtens, N. Grote, H. Ambrosius, M. Schell, D. Robbins, M. Smit, and E. Bente, “Generic foundry model for InP-based photonics,” IET Optoelectron. 5(5), 187–194 (2011).
[Crossref]

Ryf, R.

R. Ryf, N. K. Fontaine, and R.-J. Essiambre, “Spot-Based Mode Couplers for Mode-Multiplexed Transmission in Few-Mode Fiber,” IEEE Photon. Technol. Lett. 24(21), 1973–1976 (2012).
[Crossref]

N. K. Fontaine, R. Ryf, J. Bland-Hawthorn, and S. G. Leon-Saval, “Geometric requirements for photonic lanterns in space division multiplexing,” Opt. Express 20(24), 27123–27132 (2012).
[Crossref] [PubMed]

R. Ryf, S. Randel, A. Gnauck, C. Bolle, R. Essiambre, P. J. Winzer, D. W. Peckham, A. McCurdy, and R. Lingle, “Space-division multiplexing over 10 km of three-mode fiber using coherent 6x6 MIMO processing,” in Optical Fiber Communication Conference and Exposition (OFC/NFOEC), 2011 and the National Fiber Optic Engineers Conference (2011), pp. 1–3.

R. Ryf, R.-J. Essiambre, A. H. Gnauck, S. Randel, M. A. Mestre, C. Schmidt, P. J. Winzer, R. Delbue, P. Pupalaikis, and A. Sureka, “Space-division multiplexed transmission over 4200-km 3-core microstructured fiber,” in Optical Fiber Communication Conference and Exposition (OFC/NFOEC), 2012 and the National Fiber Optic Engineers Conference (2012), pp. 1–3.
[Crossref]

R. Ryf, S. Randel, N. K. Fontaine, M. Montoliu, E. Burrows, S. Chandrasekhar, A. H. Gnauck, C. Xie, R.-J. Essiambre, and P. Winzer, “32-bit/s/Hz Spectral Efficiency WDM Transmission over 177-km Few-Mode Fiber,” in Optical Fiber Communication Conference (2013).
[Crossref]

H. Chen, N. K. Fontaine, R. Ryf, B. Guan, S. J. B. Yoo, and A. M. J. Koonen, “A Fully-packaged 3D-waveguide based Dual-Fiber Spatial-Multiplexer with Up-tapered 6-mode Fiber Pigtails,” in 40th European Conference and Exhibition on Optical Communication (ECOC 2014) (2014), p. We.1.1.4.

Sahu, J. K.

Saito, T.

H. Takahashi, T. Tsuritani, E. L. T. de Gabory, T. Ito, W. R. Peng, K. Igarashi, K. Takeshima, Y. Kawaguchi, I. Morita, Y. Tsuchida, Y. Mimura, K. Maeda, T. Saito, K. Watanabe, K. Imamura, R. Sugizaki, and M. Suzuki, “First demonstration of MC-EDFA-repeatered SDM transmission of 40 x 128-Gbit/s PDM-QPSK signals per core over 6,160-km 7-core MCF,” Opt. Express 21(1), 789–795 (2013).
[Crossref] [PubMed]

K. Igarashi, T. Tsuritani, I. Morita, Y. Tsuchida, K. Maeda, M. Tadakuma, T. Saito, K. Watanabe, K. Imamura, R. Sugizaki, and M. Suzuki, “1.03-Exabit/skm Super-Nyquist-WDM transmission over 7,326-km seven-core fiber,” in 39th European Conference and Exhibition on Optical Communication (ECOC 2013) (2013), pp. 1–3.

Saitoh, K.

T. Kobayashi, H. Takara, A. Sano, T. Mizuno, H. Kawakami, Y. Miyamoto, K. Hiraga, Y. Abe, H. Ono, M. Wada, Y. Sasaki, I. Ishida, K. Takenaga, S. Matsuo, K. Saitoh, M. Yamada, H. Masuda, and T. Morioka, “2 x 344 Tb/s propagation-direction interleaved transmission over 1500-km MCF enhanced by multicarrier full electric-field digital back-propagation,” in 39th European Conference and Exhibition on Optical Communication (ECOC 2013) (2013), pp. 1–3.

Sano, A.

T. Kobayashi, H. Takara, A. Sano, T. Mizuno, H. Kawakami, Y. Miyamoto, K. Hiraga, Y. Abe, H. Ono, M. Wada, Y. Sasaki, I. Ishida, K. Takenaga, S. Matsuo, K. Saitoh, M. Yamada, H. Masuda, and T. Morioka, “2 x 344 Tb/s propagation-direction interleaved transmission over 1500-km MCF enhanced by multicarrier full electric-field digital back-propagation,” in 39th European Conference and Exhibition on Optical Communication (ECOC 2013) (2013), pp. 1–3.

Sasaki, Y.

T. Kobayashi, H. Takara, A. Sano, T. Mizuno, H. Kawakami, Y. Miyamoto, K. Hiraga, Y. Abe, H. Ono, M. Wada, Y. Sasaki, I. Ishida, K. Takenaga, S. Matsuo, K. Saitoh, M. Yamada, H. Masuda, and T. Morioka, “2 x 344 Tb/s propagation-direction interleaved transmission over 1500-km MCF enhanced by multicarrier full electric-field digital back-propagation,” in 39th European Conference and Exhibition on Optical Communication (ECOC 2013) (2013), pp. 1–3.

Schell, M.

M. Wale, J. Van der Tol, X. Leijtens, N. Grote, H. Ambrosius, M. Schell, D. Robbins, M. Smit, and E. Bente, “Generic foundry model for InP-based photonics,” IET Optoelectron. 5(5), 187–194 (2011).
[Crossref]

Schmidt, C.

R. Ryf, R.-J. Essiambre, A. H. Gnauck, S. Randel, M. A. Mestre, C. Schmidt, P. J. Winzer, R. Delbue, P. Pupalaikis, and A. Sureka, “Space-division multiplexed transmission over 4200-km 3-core microstructured fiber,” in Optical Fiber Communication Conference and Exposition (OFC/NFOEC), 2012 and the National Fiber Optic Engineers Conference (2012), pp. 1–3.
[Crossref]

Sleiffer, V.

H. Chen, V. Sleiffer, F. Huijskens, R. van Uden, C. Okonkwo, P. Leoni, M. Kuschnerov, L. Gruner-Nielsen, Y. Sun, H. de Waardt, and T. Koonen, “Employing Prism-Based Three-Spot Mode Couplers for High Capacity MDM/WDM Transmission,” IEEE Photon. Technol. Lett. 25(24), 2474–2477 (2013).
[Crossref]

H. Chen, V. Sleiffer, B. Snyder, M. Kuschnerov, R. van Uden, Y. Jung, C. M. Okonkwo, O. Raz, P. O’Brien, H. de Waardt, and T. Koonen, “Demonstration of a Photonic Integrated Mode Coupler With MDM and WDM Transmission,” IEEE Photon. Technol. Lett. 25(21), 2039–2042 (2013).
[Crossref]

Sleiffer, V. A. J. M.

Smit, M.

M. Wale, J. Van der Tol, X. Leijtens, N. Grote, H. Ambrosius, M. Schell, D. Robbins, M. Smit, and E. Bente, “Generic foundry model for InP-based photonics,” IET Optoelectron. 5(5), 187–194 (2011).
[Crossref]

Snyder, B.

H. Chen, V. Sleiffer, B. Snyder, M. Kuschnerov, R. van Uden, Y. Jung, C. M. Okonkwo, O. Raz, P. O’Brien, H. de Waardt, and T. Koonen, “Demonstration of a Photonic Integrated Mode Coupler With MDM and WDM Transmission,” IEEE Photon. Technol. Lett. 25(21), 2039–2042 (2013).
[Crossref]

Sugimoto, N.

Sugizaki, R.

H. Takahashi, T. Tsuritani, E. L. T. de Gabory, T. Ito, W. R. Peng, K. Igarashi, K. Takeshima, Y. Kawaguchi, I. Morita, Y. Tsuchida, Y. Mimura, K. Maeda, T. Saito, K. Watanabe, K. Imamura, R. Sugizaki, and M. Suzuki, “First demonstration of MC-EDFA-repeatered SDM transmission of 40 x 128-Gbit/s PDM-QPSK signals per core over 6,160-km 7-core MCF,” Opt. Express 21(1), 789–795 (2013).
[Crossref] [PubMed]

K. Igarashi, T. Tsuritani, I. Morita, Y. Tsuchida, K. Maeda, M. Tadakuma, T. Saito, K. Watanabe, K. Imamura, R. Sugizaki, and M. Suzuki, “1.03-Exabit/skm Super-Nyquist-WDM transmission over 7,326-km seven-core fiber,” in 39th European Conference and Exhibition on Optical Communication (ECOC 2013) (2013), pp. 1–3.

Sun, Y.

Sureka, A.

R. Ryf, R.-J. Essiambre, A. H. Gnauck, S. Randel, M. A. Mestre, C. Schmidt, P. J. Winzer, R. Delbue, P. Pupalaikis, and A. Sureka, “Space-division multiplexed transmission over 4200-km 3-core microstructured fiber,” in Optical Fiber Communication Conference and Exposition (OFC/NFOEC), 2012 and the National Fiber Optic Engineers Conference (2012), pp. 1–3.
[Crossref]

Suzuki, M.

H. Takahashi, T. Tsuritani, E. L. T. de Gabory, T. Ito, W. R. Peng, K. Igarashi, K. Takeshima, Y. Kawaguchi, I. Morita, Y. Tsuchida, Y. Mimura, K. Maeda, T. Saito, K. Watanabe, K. Imamura, R. Sugizaki, and M. Suzuki, “First demonstration of MC-EDFA-repeatered SDM transmission of 40 x 128-Gbit/s PDM-QPSK signals per core over 6,160-km 7-core MCF,” Opt. Express 21(1), 789–795 (2013).
[Crossref] [PubMed]

K. Igarashi, T. Tsuritani, I. Morita, Y. Tsuchida, K. Maeda, M. Tadakuma, T. Saito, K. Watanabe, K. Imamura, R. Sugizaki, and M. Suzuki, “1.03-Exabit/skm Super-Nyquist-WDM transmission over 7,326-km seven-core fiber,” in 39th European Conference and Exhibition on Optical Communication (ECOC 2013) (2013), pp. 1–3.

Tadakuma, M.

K. Igarashi, T. Tsuritani, I. Morita, Y. Tsuchida, K. Maeda, M. Tadakuma, T. Saito, K. Watanabe, K. Imamura, R. Sugizaki, and M. Suzuki, “1.03-Exabit/skm Super-Nyquist-WDM transmission over 7,326-km seven-core fiber,” in 39th European Conference and Exhibition on Optical Communication (ECOC 2013) (2013), pp. 1–3.

Takahashi, H.

Takara, H.

T. Kobayashi, H. Takara, A. Sano, T. Mizuno, H. Kawakami, Y. Miyamoto, K. Hiraga, Y. Abe, H. Ono, M. Wada, Y. Sasaki, I. Ishida, K. Takenaga, S. Matsuo, K. Saitoh, M. Yamada, H. Masuda, and T. Morioka, “2 x 344 Tb/s propagation-direction interleaved transmission over 1500-km MCF enhanced by multicarrier full electric-field digital back-propagation,” in 39th European Conference and Exhibition on Optical Communication (ECOC 2013) (2013), pp. 1–3.

Takenaga, K.

T. Kobayashi, H. Takara, A. Sano, T. Mizuno, H. Kawakami, Y. Miyamoto, K. Hiraga, Y. Abe, H. Ono, M. Wada, Y. Sasaki, I. Ishida, K. Takenaga, S. Matsuo, K. Saitoh, M. Yamada, H. Masuda, and T. Morioka, “2 x 344 Tb/s propagation-direction interleaved transmission over 1500-km MCF enhanced by multicarrier full electric-field digital back-propagation,” in 39th European Conference and Exhibition on Optical Communication (ECOC 2013) (2013), pp. 1–3.

Takeshima, K.

Tanaka, A.

Taunay, T. F.

Tkach, R. W.

R.-J. Essiambre and R. W. Tkach, “Capacity Trends and Limits of Optical Communication Networks,” Proc. IEEE 100(5), 1035–1055 (2012).
[Crossref]

R. W. Tkach, “Scaling optical communications for the next decade and beyond,” Bell Labs Tech. J. 14(4), 3–9 (2010).
[Crossref]

Tsuchida, Y.

H. Takahashi, T. Tsuritani, E. L. T. de Gabory, T. Ito, W. R. Peng, K. Igarashi, K. Takeshima, Y. Kawaguchi, I. Morita, Y. Tsuchida, Y. Mimura, K. Maeda, T. Saito, K. Watanabe, K. Imamura, R. Sugizaki, and M. Suzuki, “First demonstration of MC-EDFA-repeatered SDM transmission of 40 x 128-Gbit/s PDM-QPSK signals per core over 6,160-km 7-core MCF,” Opt. Express 21(1), 789–795 (2013).
[Crossref] [PubMed]

K. Igarashi, T. Tsuritani, I. Morita, Y. Tsuchida, K. Maeda, M. Tadakuma, T. Saito, K. Watanabe, K. Imamura, R. Sugizaki, and M. Suzuki, “1.03-Exabit/skm Super-Nyquist-WDM transmission over 7,326-km seven-core fiber,” in 39th European Conference and Exhibition on Optical Communication (ECOC 2013) (2013), pp. 1–3.

Tsuritani, T.

H. Takahashi, T. Tsuritani, E. L. T. de Gabory, T. Ito, W. R. Peng, K. Igarashi, K. Takeshima, Y. Kawaguchi, I. Morita, Y. Tsuchida, Y. Mimura, K. Maeda, T. Saito, K. Watanabe, K. Imamura, R. Sugizaki, and M. Suzuki, “First demonstration of MC-EDFA-repeatered SDM transmission of 40 x 128-Gbit/s PDM-QPSK signals per core over 6,160-km 7-core MCF,” Opt. Express 21(1), 789–795 (2013).
[Crossref] [PubMed]

K. Igarashi, T. Tsuritani, I. Morita, Y. Tsuchida, K. Maeda, M. Tadakuma, T. Saito, K. Watanabe, K. Imamura, R. Sugizaki, and M. Suzuki, “1.03-Exabit/skm Super-Nyquist-WDM transmission over 7,326-km seven-core fiber,” in 39th European Conference and Exhibition on Optical Communication (ECOC 2013) (2013), pp. 1–3.

van den Boom, H. P. A.

A. M. J. Koonen, H. Chen, H. P. A. van den Boom, and O. Raz, “Silicon Photonic Integrated Mode Multiplexer and Demultiplexer,” IEEE Photon. Technol. Lett. 24(21), 1961–1964 (2012).
[Crossref]

Van der Tol, J.

M. Wale, J. Van der Tol, X. Leijtens, N. Grote, H. Ambrosius, M. Schell, D. Robbins, M. Smit, and E. Bente, “Generic foundry model for InP-based photonics,” IET Optoelectron. 5(5), 187–194 (2011).
[Crossref]

van Uden, R.

H. Chen, V. Sleiffer, F. Huijskens, R. van Uden, C. Okonkwo, P. Leoni, M. Kuschnerov, L. Gruner-Nielsen, Y. Sun, H. de Waardt, and T. Koonen, “Employing Prism-Based Three-Spot Mode Couplers for High Capacity MDM/WDM Transmission,” IEEE Photon. Technol. Lett. 25(24), 2474–2477 (2013).
[Crossref]

H. Chen, V. Sleiffer, B. Snyder, M. Kuschnerov, R. van Uden, Y. Jung, C. M. Okonkwo, O. Raz, P. O’Brien, H. de Waardt, and T. Koonen, “Demonstration of a Photonic Integrated Mode Coupler With MDM and WDM Transmission,” IEEE Photon. Technol. Lett. 25(21), 2039–2042 (2013).
[Crossref]

van Uden, R. G. H.

Veljanovski, V.

Wada, M.

T. Kobayashi, H. Takara, A. Sano, T. Mizuno, H. Kawakami, Y. Miyamoto, K. Hiraga, Y. Abe, H. Ono, M. Wada, Y. Sasaki, I. Ishida, K. Takenaga, S. Matsuo, K. Saitoh, M. Yamada, H. Masuda, and T. Morioka, “2 x 344 Tb/s propagation-direction interleaved transmission over 1500-km MCF enhanced by multicarrier full electric-field digital back-propagation,” in 39th European Conference and Exhibition on Optical Communication (ECOC 2013) (2013), pp. 1–3.

Wale, M.

M. Wale, J. Van der Tol, X. Leijtens, N. Grote, H. Ambrosius, M. Schell, D. Robbins, M. Smit, and E. Bente, “Generic foundry model for InP-based photonics,” IET Optoelectron. 5(5), 187–194 (2011).
[Crossref]

Watanabe, K.

H. Takahashi, T. Tsuritani, E. L. T. de Gabory, T. Ito, W. R. Peng, K. Igarashi, K. Takeshima, Y. Kawaguchi, I. Morita, Y. Tsuchida, Y. Mimura, K. Maeda, T. Saito, K. Watanabe, K. Imamura, R. Sugizaki, and M. Suzuki, “First demonstration of MC-EDFA-repeatered SDM transmission of 40 x 128-Gbit/s PDM-QPSK signals per core over 6,160-km 7-core MCF,” Opt. Express 21(1), 789–795 (2013).
[Crossref] [PubMed]

K. Igarashi, T. Tsuritani, I. Morita, Y. Tsuchida, K. Maeda, M. Tadakuma, T. Saito, K. Watanabe, K. Imamura, R. Sugizaki, and M. Suzuki, “1.03-Exabit/skm Super-Nyquist-WDM transmission over 7,326-km seven-core fiber,” in 39th European Conference and Exhibition on Optical Communication (ECOC 2013) (2013), pp. 1–3.

Wilkinson, T. D.

Winfield, R.

Winzer, P.

R. Ryf, S. Randel, N. K. Fontaine, M. Montoliu, E. Burrows, S. Chandrasekhar, A. H. Gnauck, C. Xie, R.-J. Essiambre, and P. Winzer, “32-bit/s/Hz Spectral Efficiency WDM Transmission over 177-km Few-Mode Fiber,” in Optical Fiber Communication Conference (2013).
[Crossref]

Winzer, P. J.

S. Chandrasekhar, A. H. Gnauck, X. Liu, P. J. Winzer, Y. Pan, E. C. Burrows, T. F. Taunay, B. Zhu, M. Fishteyn, M. F. Yan, J. M. Fini, E. M. Monberg, and F. V. Dimarcello, “WDM/SDM transmission of 10 x 128-Gb/s PDM-QPSK over 2688-km 7-core fiber with a per-fiber net aggregate spectral-efficiency distance product of 40,320 km·b/s/Hz,” Opt. Express 20(2), 706–711 (2012).
[Crossref] [PubMed]

P. J. Winzer, “Energy-Efficient Optical Transport Capacity Scaling Through Spatial Multiplexing,” IEEE Photon. Technol. Lett. 23(13), 851–853 (2011).
[Crossref]

R. Ryf, R.-J. Essiambre, A. H. Gnauck, S. Randel, M. A. Mestre, C. Schmidt, P. J. Winzer, R. Delbue, P. Pupalaikis, and A. Sureka, “Space-division multiplexed transmission over 4200-km 3-core microstructured fiber,” in Optical Fiber Communication Conference and Exposition (OFC/NFOEC), 2012 and the National Fiber Optic Engineers Conference (2012), pp. 1–3.
[Crossref]

R. Ryf, S. Randel, A. Gnauck, C. Bolle, R. Essiambre, P. J. Winzer, D. W. Peckham, A. McCurdy, and R. Lingle, “Space-division multiplexing over 10 km of three-mode fiber using coherent 6x6 MIMO processing,” in Optical Fiber Communication Conference and Exposition (OFC/NFOEC), 2011 and the National Fiber Optic Engineers Conference (2011), pp. 1–3.

Wood, W.

Xie, C.

R. Ryf, S. Randel, N. K. Fontaine, M. Montoliu, E. Burrows, S. Chandrasekhar, A. H. Gnauck, C. Xie, R.-J. Essiambre, and P. Winzer, “32-bit/s/Hz Spectral Efficiency WDM Transmission over 177-km Few-Mode Fiber,” in Optical Fiber Communication Conference (2013).
[Crossref]

Yamada, M.

T. Kobayashi, H. Takara, A. Sano, T. Mizuno, H. Kawakami, Y. Miyamoto, K. Hiraga, Y. Abe, H. Ono, M. Wada, Y. Sasaki, I. Ishida, K. Takenaga, S. Matsuo, K. Saitoh, M. Yamada, H. Masuda, and T. Morioka, “2 x 344 Tb/s propagation-direction interleaved transmission over 1500-km MCF enhanced by multicarrier full electric-field digital back-propagation,” in 39th European Conference and Exhibition on Optical Communication (ECOC 2013) (2013), pp. 1–3.

Yan, M. F.

Yano, Y.

Yerolatsitis, S.

Yoo, S. J. B.

H. Chen, N. K. Fontaine, R. Ryf, B. Guan, S. J. B. Yoo, and A. M. J. Koonen, “A Fully-packaged 3D-waveguide based Dual-Fiber Spatial-Multiplexer with Up-tapered 6-mode Fiber Pigtails,” in 40th European Conference and Exhibition on Optical Communication (ECOC 2014) (2014), p. We.1.1.4.

Zhu, B.

Bell Labs Tech. J. (1)

R. W. Tkach, “Scaling optical communications for the next decade and beyond,” Bell Labs Tech. J. 14(4), 3–9 (2010).
[Crossref]

IEEE Photon. Technol. Lett. (5)

P. J. Winzer, “Energy-Efficient Optical Transport Capacity Scaling Through Spatial Multiplexing,” IEEE Photon. Technol. Lett. 23(13), 851–853 (2011).
[Crossref]

R. Ryf, N. K. Fontaine, and R.-J. Essiambre, “Spot-Based Mode Couplers for Mode-Multiplexed Transmission in Few-Mode Fiber,” IEEE Photon. Technol. Lett. 24(21), 1973–1976 (2012).
[Crossref]

A. M. J. Koonen, H. Chen, H. P. A. van den Boom, and O. Raz, “Silicon Photonic Integrated Mode Multiplexer and Demultiplexer,” IEEE Photon. Technol. Lett. 24(21), 1961–1964 (2012).
[Crossref]

H. Chen, V. Sleiffer, B. Snyder, M. Kuschnerov, R. van Uden, Y. Jung, C. M. Okonkwo, O. Raz, P. O’Brien, H. de Waardt, and T. Koonen, “Demonstration of a Photonic Integrated Mode Coupler With MDM and WDM Transmission,” IEEE Photon. Technol. Lett. 25(21), 2039–2042 (2013).
[Crossref]

H. Chen, V. Sleiffer, F. Huijskens, R. van Uden, C. Okonkwo, P. Leoni, M. Kuschnerov, L. Gruner-Nielsen, Y. Sun, H. de Waardt, and T. Koonen, “Employing Prism-Based Three-Spot Mode Couplers for High Capacity MDM/WDM Transmission,” IEEE Photon. Technol. Lett. 25(24), 2474–2477 (2013).
[Crossref]

IET Optoelectron. (1)

M. Wale, J. Van der Tol, X. Leijtens, N. Grote, H. Ambrosius, M. Schell, D. Robbins, M. Smit, and E. Bente, “Generic foundry model for InP-based photonics,” IET Optoelectron. 5(5), 187–194 (2011).
[Crossref]

J. Lightwave Technol. (2)

Opt. Express (6)

V. A. J. M. Sleiffer, Y. Jung, V. Veljanovski, R. G. H. van Uden, M. Kuschnerov, H. Chen, B. Inan, L. G. Nielsen, Y. Sun, D. J. Richardson, S. U. Alam, F. Poletti, J. K. Sahu, A. Dhar, A. M. J. Koonen, B. Corbett, R. Winfield, A. D. Ellis, and H. de Waardt, “73.7 Tb/s (96 x 3 x 256-Gb/s) mode-division-multiplexed DP-16QAM transmission with inline MM-EDFA,” Opt. Express 20(26), B428–B438 (2012).
[Crossref] [PubMed]

Y. Jung, S. Alam, Z. Li, A. Dhar, D. Giles, I. P. Giles, J. K. Sahu, F. Poletti, L. Grüner-Nielsen, and D. J. Richardson, “First demonstration and detailed characterization of a multimode amplifier for space division multiplexed transmission systems,” Opt. Express 19(26), B952–B957 (2011).
[Crossref] [PubMed]

H. Takahashi, T. Tsuritani, E. L. T. de Gabory, T. Ito, W. R. Peng, K. Igarashi, K. Takeshima, Y. Kawaguchi, I. Morita, Y. Tsuchida, Y. Mimura, K. Maeda, T. Saito, K. Watanabe, K. Imamura, R. Sugizaki, and M. Suzuki, “First demonstration of MC-EDFA-repeatered SDM transmission of 40 x 128-Gbit/s PDM-QPSK signals per core over 6,160-km 7-core MCF,” Opt. Express 21(1), 789–795 (2013).
[Crossref] [PubMed]

N. K. Fontaine, R. Ryf, J. Bland-Hawthorn, and S. G. Leon-Saval, “Geometric requirements for photonic lanterns in space division multiplexing,” Opt. Express 20(24), 27123–27132 (2012).
[Crossref] [PubMed]

S. Yerolatsitis, I. Gris-Sánchez, and T. A. Birks, “Adiabatically-tapered fiber mode multiplexers,” Opt. Express 22(1), 608–617 (2014).
[Crossref] [PubMed]

S. Chandrasekhar, A. H. Gnauck, X. Liu, P. J. Winzer, Y. Pan, E. C. Burrows, T. F. Taunay, B. Zhu, M. Fishteyn, M. F. Yan, J. M. Fini, E. M. Monberg, and F. V. Dimarcello, “WDM/SDM transmission of 10 x 128-Gb/s PDM-QPSK over 2688-km 7-core fiber with a per-fiber net aggregate spectral-efficiency distance product of 40,320 km·b/s/Hz,” Opt. Express 20(2), 706–711 (2012).
[Crossref] [PubMed]

Opt. Lett. (2)

Proc. IEEE (1)

R.-J. Essiambre and R. W. Tkach, “Capacity Trends and Limits of Optical Communication Networks,” Proc. IEEE 100(5), 1035–1055 (2012).
[Crossref]

Other (17)

ModeGap,” http://modegap.eu .

P. J. Winzer and G. J. Foschini, “Mode division multiplexed transmission systems,” in Optical Fiber Communication Conference, OSA Technical Digest (online) (Optical Society of America, 2014), p. Th1J.1.

A. D. Ellis, “The nonlinear Shannon limit and the need for new fibres,” in (2012), Vol. 8434, p. 84340H–84340H–10.

M. D. Feuer, L. E. Nelson, K. S. Abedin, X. Zhou, T. F. Taunay, J. F. Fini, B. Zhu, R. Isaac, R. Harel, G. Cohen, and D. M. Marom, “ROADM System for Space Division Multiplexing with Spatial Superchannels,” in Optical Fiber Communication Conference/National Fiber Optic Engineers Conference 2013, OSA Technical Digest (online) (Optical Society of America, 2013), p. PDP5B.8.
[Crossref]

K. Igarashi, T. Tsuritani, I. Morita, Y. Tsuchida, K. Maeda, M. Tadakuma, T. Saito, K. Watanabe, K. Imamura, R. Sugizaki, and M. Suzuki, “1.03-Exabit/skm Super-Nyquist-WDM transmission over 7,326-km seven-core fiber,” in 39th European Conference and Exhibition on Optical Communication (ECOC 2013) (2013), pp. 1–3.

R. Ryf, S. Randel, N. K. Fontaine, M. Montoliu, E. Burrows, S. Chandrasekhar, A. H. Gnauck, C. Xie, R.-J. Essiambre, and P. Winzer, “32-bit/s/Hz Spectral Efficiency WDM Transmission over 177-km Few-Mode Fiber,” in Optical Fiber Communication Conference (2013).
[Crossref]

Q. Kang, E. L. Lim, Y. Jung, F. Poletti, S. Alam, and D. J. Richardson, “Design of Four-Mode Erbium Doped Fiber Amplifier with Low Differential Modal Gain for Modal Division Multiplexed Transmissions,” in Optical Fiber Communication Conference/National Fiber Optic Engineers Conference 2013, OSA Technical Digest (online) (Optical Society of America, 2013), p. OTu3G.3.
[Crossref]

R. Ryf, N. K. Fontaine, M. Montoliu, S. Randel, B. Ercan, H. Chen, S. Chandrasekhar, A. Gnauck, S. G. Leon-Saval, J. Bland-Hawthorn, J. R. Salazar Gil, Y. Sun, and R. Lingle, “Photonic-Lantern-Based Mode Multiplexers for Few-Mode-Fiber Transmission,” in Optical Fiber Communication Conference, OSA Technical Digest (online) (Optical Society of America, 2014), p. W4J.2.

E. Ip, M. Li, Y.-K. Huang, A. Tanaka, E. Mateo, W. Wood, J. Hu, Y. Yano, and K. Koreshkov, “146λx6x19-Gbaud Wavelength- and Mode-Division Multiplexed Transmission over 10x50-km Spans of Few-Mode Fiber with a Gain-Equalized Few-Mode EDFA,” in Optical Fiber Communication Conference/National Fiber Optic Engineers Conference 2013, OSA Technical Digest (online) (Optical Society of America, 2013), p. PDP5A.2.

T. Kobayashi, H. Takara, A. Sano, T. Mizuno, H. Kawakami, Y. Miyamoto, K. Hiraga, Y. Abe, H. Ono, M. Wada, Y. Sasaki, I. Ishida, K. Takenaga, S. Matsuo, K. Saitoh, M. Yamada, H. Masuda, and T. Morioka, “2 x 344 Tb/s propagation-direction interleaved transmission over 1500-km MCF enhanced by multicarrier full electric-field digital back-propagation,” in 39th European Conference and Exhibition on Optical Communication (ECOC 2013) (2013), pp. 1–3.

H. Chen, N. K. Fontaine, R. Ryf, B. Guan, S. J. B. Yoo, and A. M. J. Koonen, “A Fully-packaged 3D-waveguide based Dual-Fiber Spatial-Multiplexer with Up-tapered 6-mode Fiber Pigtails,” in 40th European Conference and Exhibition on Optical Communication (ECOC 2014) (2014), p. We.1.1.4.

N. K. Fontaine, “Photonic lantern spatial multiplexers in space-division multiplexing,” in 2013 IEEE Photonics Society Summer Topical Meeting Series (2013), pp. 97–98.

R. Ryf, R.-J. Essiambre, A. H. Gnauck, S. Randel, M. A. Mestre, C. Schmidt, P. J. Winzer, R. Delbue, P. Pupalaikis, and A. Sureka, “Space-division multiplexed transmission over 4200-km 3-core microstructured fiber,” in Optical Fiber Communication Conference and Exposition (OFC/NFOEC), 2012 and the National Fiber Optic Engineers Conference (2012), pp. 1–3.
[Crossref]

R. Ryf, S. Randel, A. Gnauck, C. Bolle, R. Essiambre, P. J. Winzer, D. W. Peckham, A. McCurdy, and R. Lingle, “Space-division multiplexing over 10 km of three-mode fiber using coherent 6x6 MIMO processing,” in Optical Fiber Communication Conference and Exposition (OFC/NFOEC), 2011 and the National Fiber Optic Engineers Conference (2011), pp. 1–3.

F. M. Soares, K. Janiak, R. G. Broeke, and N. Grote, “Technology development towards a generic InP-based photonic-integration foundry,” in M. F. Costa, ed. (2011), pp. 800111–800111–7.

R. Ryf, N. K. Fontaine, and R.-J. Essiambre, “Spot-based mode coupler for mode-multiplexed transmission in few-mode fiber,” in Photonics Society Summer Topical Meeting Series, 2012 IEEE (2012), pp. 199–200.

PARADIGM,” http://www.paradigm.jeppix.eu/ .

Cited By

Optica participates in Crossref's Cited-By Linking service. Citing articles from Optica Publishing Group journals and other participating publishers are listed here.

Alert me when this article is cited.


Figures (13)

Fig. 1
Fig. 1 Schematic diagram of the SMUX.
Fig. 2
Fig. 2 (a) Comparison of the fields of the LP11a mode and push-pull case; (b) 5-spot region.
Fig. 3
Fig. 3 (a) Circuit schematics, (b) SEM image of the region of five grating couplers, (c) image of the packaged SOI-based SMUX.
Fig. 4
Fig. 4 (a) Excited mode profiles for all spatial modes in two polarizations and (b) insertion loss for LP01 and LP11 modes versus wavelength.
Fig. 5
Fig. 5 (a) Schematic of the 45° vertical mirror; (b) SEM image of a 45° mirror etched on an InP waveguide.
Fig. 6
Fig. 6 (a) Microscope image of an InP-based SMUX circuit; SEM images of the 5-spot region (b) before and (c)-(d) after mirror machining.
Fig. 7
Fig. 7 The arrangement of 9 spots for selectively exciting each spatial mode.
Fig. 8
Fig. 8 CE for (a) LP01 and (b) LP02 modes under LP01 launch condition with α = 0.28 and variation β and γ1.
Fig. 9
Fig. 9 CE for (a) LP01 and (b) LP02 modes under LP02 launch condition with α = 0.28 and variation β and γ2.
Fig. 10
Fig. 10 CE for (a) LP11a and (b) LP21a modes under corresponding launch condition with variation α and β.
Fig. 11
Fig. 11 (a) Spots arrangement of a 3-spot SMUX; (b) microscope image of a 3-spot SMUX circuit; SEM images of the 3-spot region (c) before and (d)-(e) after mirror machining.
Fig. 12
Fig. 12 (a) Spot arrangement and (b) sketch of a 6-core photonic lantern for mode multiplexing.
Fig. 13
Fig. 13 (a) Sketch and (b) picture of the fully-packaged dual-channel 6-mode SMUX realized by 3DW technology.

Tables (1)

Tables Icon

Table 1 High capacity SDM/WDM transmission trials

Equations (6)

Equations on this page are rendered with MathJax. Learn more.

[ F 1 F 2 F N ] F: mode  field = [ γ 1,1 γ 1,2 γ 2,1 γ 2,2 γ 1,N γ 2,N γ N,1 γ N,2 γ N,N ] Γ:  mode conversion [ α 1 0 0 α 2 0 0 0 0 α N ] A:   internal attenuation [ I 1 I 2 I N ] I: launch field
γ i,j = E launch,i * H mode,j dS E launch,i * H launch,i dS E mode,j * H mode,j dS
H=ΓA
CIL= ( λ n 2 ) N
MDL= max( λ n 2 ) min( λ n 2 )
[ F 1 F 2 F N ]=Γ[ I 1 I 2 I N ]=Γ [ F 1 ' F 2 ' F N ' ] F : front-end supermodes

Metrics