Absorption and dispersion signals of D2 lines of rubidium atoms in a vapor cell have been experimentally investigated with the modulation transfer spectrum (MTS). Normal dispersion was observed at the transitions of Fg→Fe=Fg-1 and Fg→Fe=Fg; anomalous dispersion, at transitions of Fg→Fe=Fg+1; and crossover resonance, by the transitions of Fg→Fe=Fg-1 and Fg→Fe=Fg. The signal lineshape of the MTS and the detector phase are addressed accurately.
© 2003 Optical Society of America
With the modulation transfer spectrum (MTS), the modulation of a pump beam can be transferred to a counterpropagating (and originally unmodulated) probe beam in a nonlinear medium –. Modulation transfer occurs because the probe and two frequency components of the modulated pump, such as the carrier and one sideband, undergo four-wave mixing as a result of the nonlinear susceptibility of the medium. If the susceptibility is sufficiently strong, this interaction produces a fourth beam, which, in the case of counterpropagating pump and probe beams, is a sideband for the probe. The sidebands generated in the probe field and the probe field itself produce a photocurrent at the modulation frequency in a photodetector. By use of a phase-sensitive detection scheme, it is therefore possible to recover the dispersion and absorption components of the subresonance related to the in-phase and quadrature-demodulated components, respectively. These signals are odd functions of the frequency detuning between the laser frequency and the resonance frequency. Because modulation transfer is a purely nonlinear phenomenon, it is insensitive to the background absorption of the medium and is consequently particularly well suited to applications in which one wishes to lock a laser to a well-defined frequency reference. The applicability of the MTS in the laser frequency standards has been well demonstrated during the past couple of years in frequency-doubled YAG lasers, which are precisely stabilized to the molecular iodine transitions , . The MTS method has also been used on the Rb  and Cs  atomic species for applications in metrology. It has been pointed that the intensity relationship of the signals obtained by the MTS in different transitions is different from that in the absorption spectrum signals , , but this phenomenon has not been explained so far. The usual technology in the MTS via saturated absorption centers on using frequency modulation (FM) to produce the sidebands on the pump beam. This is primarily because in practice it is relatively simple to frequency modulate a beam at high frequencies with electro-optic modulators. High frequencies are desirable because the laser amplitude noise is reduced, which allows better signal-to-noise ratios. However, when the modulation frequency is lower than the sub-Doppler linewidth, both the absorption and the dispersion signals have a high slope which crossed the center of the resonance (frequency discriminator) and can therefore obtain optimum signals for laser frequency locking to the resonance center.
In this paper, we experimentally investigate the absorption and dispersion signals of Rb D2 lines in a vapor cell with the MTS. The pump-saturating beam is frequency shifted by 110 MHz and, at the same time, is frequency modulated (100 kHz) with an acousto-optic modulator (AOM). A lock-in amplifier is employed to demodulate the signal of the MTS accurately at different detector phases. The anomalous and normal dispersions in coherently prepared degenerate two-level atomic transitions has been observed. The maximum signals of the MTS as well as the corresponding detector phases are given. To the best of our knowledge, this is the first experiment using the MTS to investigate the characteristic of absorption and dispersion of Rb. The signal strength of the MTS at different atomic transitions is also analyzed.
The MTS is generally observed by means of detecting the beat between the probe field and the induced sidebands with a phase sensitive detector. When a frequency-modulated pump beam is used, the beat signal on the detector is of the form 
where is the Lorentzian function describing the absorption and . Here Jn is the nth-order Bessel function, β is the modulation index (the ratio of the modulation depth to the modulation frequency), Γ is the natural line width, ωm is the modulation frequency, Δ is the frequency shift between pump and probe beams, ω-ω0 is the frequency detuning from line center, and ϕ is the detector phase with respect to the modulation field applied to the pump beam. C and B are constants that depend on the properties of atomic transitions. When the modulation frequency ωm is lower than the sub-Doppler linewidth Γ, the absorption lineshape (in-phase component) of the MTS is a dispersion-like signal that is proportional to the derivative of the original absorption lineshape of the driven two-level atomic transitions versus the frequency, and the dispersion lineshape (in-quadrature component) is just the original dispersion lineshape of the atomic transitions as shown Fig. 1. Both the absorption and dispersion signals show the same lineshape and have a high slope crossing the center of the resonance. Thus Eq. (1) is simplified to
From Eq. (2), the maximum signal amplitude is obtained at tan(ϕ)=Y/X. Phase angle ϕ may be adjusted accurately owing to use of the lock-in amplifier in our experiment, so in-phase omponent X and in-quadrature component Y may be measured, respectively.
The experimental setup for the MTS is illustrated in Fig. 2. Two Faraday isolators (40 dB) in series are placed in the output of a master-oscillator power amplifier (MOPA) semiconductor laser system (TuiOptics TA100) in order to avoid optical feedback. A small percentage (B2) of the output beam (~1 mW) is picked off by a beam splitter (BS) for the MTS, which is then is separated by a polarizing beam splitter (PBS1) into parts 1 and 2. The beam 1 (~0.3 mW) and beam 2 (~50 µW) serve as the pump and probe lights for the MTS of Rb atoms, respectively. The two beams collinearly counterpropagate in a 3-cm-long Rb glass cell. The Rb cell is magnet-shielded with a µ-metal shielding. To reduce the disturbance of the optical feedback from the photodetector to the MTS, the pump beam is frequency shifted by 110 MHz with an AOM (Crystal Technology, Inc., Model 3110). Unlike ordinary MTS technology in which the pump beam is phase modulated by means of an EOM, in our scheme the frequency modulation is also implemented with the same AOM. The voltage-controlled oscillator (VCO) with the dc offset control voltage is used to produce the rf output at 110 MHz. A small (60 mV, 100 kHz) sinusoidal oscillation is added on the VCO control voltage, which forms a frequency modulation of ±180 kHz on the pump beam. The sidebands generated in the probe field and the probe field itself are detected by a PIN photodiode detector (PD) after passing through the polarized beam splitter (PBS2). A lock-in amplifier (Stanford Research Systems Model: SR830 DSP) phase-sensitively demodulates this beat signal to provide dispersion-shaped MTS signal. The saturated absorption signal is observed simultaneously by means of dividing a part of the photocurrent from the detector on an oscilloscope.
Figure 3 shows the recorded spectra on the oscilloscope when the frequency of the laser diode is scanned over the transition Fg=3→Fe of the D2 line of 85Rb (780nm) for the different polarizations (90°, ~ 60°, and ~ 40° with respect to the polarization of the pump light) of the probe beam, in which the saturated absorption signal and the in-phase and in-quadrature components of the MTS are simultaneously recorded. From comparison among the upper traces of Figs. 3(a)–3(c) it can be seen that the saturated absorption signal of Fg=3→Fe=4 is changed from positive peak (enhanced transmission) to negative peak (enhanced absorption) when the angle between probe and pump beam polarizations are changed from orthogonal to parallel. Similar peculiarities in the saturated absorption lineshapes have been studied in previous papers , . Optical pumping of the pump beam increases the dipole coupling strength of probe beam with the same polarization and is therefore responsible for the increase in absorption. Conversely, the probe beam orthogonal to that of pump beam counteracts this pump process, leading to a decrease of the effective dipole moment and hence an increase in transmission. The middle traces of Figs. 3(a)–3(c) are the in-phase component X of the MTS whose amplitude and sign for the transition Fg=3→Fe=4 sensitively depended on the saturated absorption signal.
The in-quadrature (dispersion) components Y of the MTS in Figs. 3(a)–3(c) are independent on the saturated absorption signal. The closed transition Fg=3→Fe=4 has larger anomalous dispersion than the open transition Fg=3→Fe=2 and Fe=3. Although the steep anomalous dispersion in a coherently prepared degenerate Fg=3→Fe=4 two-level 85Rb atomic system were given with a model recently used to study subnatural electromagnetically induced absorption (EIA) resonances ,, our experimental results demonstrate this characteristic in a different way. The crossover resonance CO2-3 by the transition Fg=3→Fe=2 and Fe=3 also has anomalous dispersion with low strength.
The spectra of the transition Fg=2→Fe of the D2 line of 85Rb for the probe beam with the linear polarization perpendicular to that of pump beam are shown in Fig. 4. The saturated absorption signal of the closed Fg=2→Fe=1 transition is a negative peak, thus the inphase component X of the MTS is the negative sign. Because of the normal dispersion of the Fg=2→Fe=1 and Fe=2 transitions , , the in-quadrature components Y have a positive sign. However, the crossover resonance CO1-2 has larger anomalous dispersion, and its in-quadrature components Y have a negative sign. In a case similar to that of the D2 line of 85Rb, the D2 line of 87Rb has the same experimental results. When we know the strength and sign of the in-phase X and in-quadrature components Y, the maximum signal strength of the MTS and the corresponding detector phase can be determined exactly.
In summary, we have experimentally investigated the absorption and dispersion signals of Rb D2 lines in a vapor cell with the modulation transfer spectrum (MTS). When the modulation frequency is lower than the sub-Doppler linewidth, the strength and sign for the in-phase component of the MTS depend on the shape profile of the original absorption signal and for the in-quadrature component on the dispersion of the degenerate two-level atomic transitions. The normal dispersion was observed at the transitions of Fg→Fe=Fg-1 and Fg→Fe=Fg; the anomalous dispersions, at transitions of Fg→Fe=Fg+1; and the crossover resonance, by the transitions of Fg→Fe=Fg-1 and Fg→Fe=Fg. For the closed transitions the dispersion signal is larger. It was pointed out in Ref.  that the intensity relationship in the signal obtained by the MTS is somewhat different from that in the original absorption signal, and the authors did not present a reasonable explanation for this. From above analyses we deem that this is because, as discussed in Ref. , the detector phase and dispersion of the degenerate two-level atomic transitions was not considered. Our experiments shows that the transition of Fg=4→Fe=5 of Cs is a closed transition and has large anomalous dispersion, which results in the MTS lineshape signal of Fg=4→Fe=5 with an enhanced efficiency as observed in Ref. . In our experiment, we use a single-passed AOM for providing the pump-beam modulation. This modulation introduces the amplitude modulation that results from pointing fluctuations of the beam. It has been observed that dispersion-shaped MTS signals are unsymmetrical as shown in Figs. 3 and 4 . However, addressing the signal lineshape of the MTS accurately is important for frequency-locking applications in our research.
This research was supported by the National Fundamental Research Program (No. 2001CB309304), the National Natural Science Foundation of China (Approval Nos. 60178012 and 60238010), and the Shanxi Province Young Science Foundation (No. 20021014).
References and links
2. G. Camy, Ch. Borde, and M. Ducloy, “Hererodyne saturation spectroscopy through frequency modulation of the saturating beam,” Opt. Commun. 41, 325 (1982). [CrossRef]
3. M. Ducloy and D. Bloch, “Polarization properties of phase-conjugate mirrors: angular dependence and disorienting collision effects in resonant backward four-wave mixing for Doppler-broadened degenerate transitions,” Phys. Rev. A 30, 3107–3122 (1984). [CrossRef]
4. L. S. Ma and J. L. Hall, “Optical hererodyne spectroscopy enhanced by an external optical cavity toward improved working standards,” IEEE J. Quantum Electron. 26, 2006–2012 (1990). [CrossRef]
5. E. Jaatinen, “Theoretical determination of maximum signal levels obtainable with modulation transfer spectroscopy,” Opt. Commun. 120, 91–97 (1995). [CrossRef]
6. M. L. Eickhoff and J. L. Hall, “Optical frequency standard at 532nm,” IEEE Trans. Instrum. Meas. 44, 155–158 (1995). [CrossRef]
7. J. Ye, L. Robertsson, S. Picard, L. S. Ma, and J. L. Hall, “Absolute frequency atlas of molecular I-2 lines at 532 nm,” IEEE Trans. Instrum. Meas. 48, 544–549 (1999). [CrossRef]
8. F. L. Hong, J. Ishikawa, J. Yoda, J. Ye, L. S. Ma, and J. L. Hall, “Frequency comparison of I-127(2)-stabilized Nd:YAG lasers,” IEEE Trans. Instrum. Meas. 48, 532–536 (1999). [CrossRef]
9. F. L. Hong, J. Ishikawa, Z. Y. Bi, J. Zhang, K. Seta, A. Onae, J. Yoda, and H. Matsumoto, “Portable I-2-stabilized Nd : YAG laser for international comparisons,” IEEE Trans. Instrum. Meas. 50, 486–489 (2001). [CrossRef]
10. N. Ito, “Doppler-free modulation transfer spectroscopy of rubidium 52S1/2-62P1/2 transitions using a frequencydoubled diode laser blue-light source,” Rev. Sci. Instrum. 71, 2655–2662 (2000). [CrossRef]
11. F. Bertinetto, P. Cordiale, and G. Galzerano, “Frequency stabilization of DBR diode laser against Cs absorption lines at 852nm using the modulation transfer method,” IEEE Trans. Instrum. Meas. 50, 490–492 (2001). [CrossRef]
12. O. Schmidt, K. M. Knaak, R. Wynands, and D. Meschede, “Cesium saturation spectroscopy revisited—how to reverse peaks and observe narrow resonances,” Appl. Phys. B 59, 167–178 (1994). [CrossRef]
13. K. B. Im, H. Y. Jung, C. H. Oh, S. H. Song, P. S. Kim, and H. S. Lee, “Saturated absorption signals for the Cs D2 line,” Phys. Rev. A 63, 034501 (2001). [CrossRef]
14. A. M. Akulshin, S. Barreiro, and A. Lezama, “Steep anomalous dispersion in coherently prepared Rb vapor,” Phys. Rev. Lett. 83, 4277–4280 (1999). [CrossRef]
15. A. Lezama, S. Barreiro, and A. M. Akulshin, “Electromagnetically induced absorption,” Phys. Rev. A. 59, 4732–4735 (1999). [CrossRef]