Abstract

Abstract

The value of Δ in Fig.7 and Fig.8 was wrongly printed.

© 1999 Optical Society of America

Full Article  |  PDF Article
Related Articles
Biphotonic process for recording holograms with continuous-wave lasers in the near infrared: erratum

C. Carre, D. Ritzenthaler, D. J. Lougnot, and J. P. Fouassier
Opt. Lett. 13(3) 254-254 (1988)

Errata to: Geometric Optics of Thermal Blooming in Gases. Part 1

P. V. Avizonis, C. B. Hogge, R. R. Butts, and J. R. Kenemuth
Appl. Opt. 11(9) 2105-2105 (1972)

Amplified spontaneous emission and optical gain measurements from pyrromethene 567 – doped polymer waveguides and quasi-waveguides: erratum

A. Costela, O. García, L. Cerdán, I. García-Moreno, and R. Sastre
Opt. Express 16(10) 7587-7587 (2008)

References

  • View by:
  • |

  1. R. Kapoor and G. S. Agarwal, ”Finite beam curvature related patterns in a saturable medium,”Opt. Express 4, 161-166 (1999), http://epubs.osa.org/oearchive/source/8500.htm
    [Crossref] [PubMed]

Other (1)

R. Kapoor and G. S. Agarwal, ”Finite beam curvature related patterns in a saturable medium,”Opt. Express 4, 161-166 (1999), http://epubs.osa.org/oearchive/source/8500.htm
[Crossref] [PubMed]

Cited By

OSA participates in Crossref's Cited-By Linking service. Citing articles from OSA journals and other participating publishers are listed here.

Alert me when this article is cited.


Figures (2)

 Figure 7
Figure 7

Patterns obtained with propagation of a diverging elliptic-Gaussian beam through a defocusing nonlinear medium. The medium was placed at several positions after the beam waist. Δ = 18, α = 300, G 0 = 30, and q = [ z 0 + .12 i , z 0 + .21 i ] cm. Aperture was 12 times of the input beam size along both the axes. The successive frames (from left to right) are for z 0 = −3.0, -4.0 and -5.0 cm.

Figure 8
Figure 8

Patterns obtained with propagation of a converging elliptic-Gaussian beam through a defocusing nonlinear medium. The medium was placed at several positions before the beam waist. Δ = 18, α = 300, G 0 = 30, and q = [ z 0 + .12 i , z 0 + .21 i ] cm. Aperture was 12 times of the input beam size along both the axes. The successive frames (from left to right) are for z 0 = 3.0, 4.0 and 5.0 cm.

Metrics