Abstract

A highly sensitive refractive index sensor based on surface plasmon resonance in a side-polished low-index polymer optical fiber is proposed for biosensing. Benefitting from the low refractive index of the fiber core, the sensitivity of the device can reach ~44567 nm/RIU theoretically for aqueous solutions, at the expense of a lowered upper detection limit that is down to ~1.340. The sensor is fabricated by coating 55-nm-thick Au-film on the polished surface of a graded-index perfluorinated polymer optical fiber. Results show that the sensor exhibits a sensitivity of ~22779 nm/RIU at 1.335 with a figure of merit of 61.2. When employed for glucose sensing, the sensor presents an averaged sensitivity of 24.50 nm/wt%, or 0.46 nm/mM. This device is expected to have potential applications in cost-effective bio- and chemical-sensing.

© 2018 Optical Society of America under the terms of the OSA Open Access Publishing Agreement

Full Article  |  PDF Article
OSA Recommended Articles
Highly sensitive multi-core flat fiber surface plasmon resonance refractive index sensor

Ahmmed A. Rifat, G. A. Mahdiraji, Yong Meng Sua, Rajib Ahmed, Y. G. Shee, and F. R. Mahamd Adikan
Opt. Express 24(3) 2485-2495 (2016)

Surface plasmon resonance biosensor based on gold-coated side-polished hexagonal structure photonic crystal fiber

Tiesheng Wu, Yu Shao, Ying Wang, Shaoqing Cao, Weiping Cao, Feng Zhang, Changrui Liao, Jun He, Yijian Huang, Maoxiang Hou, and Yiping Wang
Opt. Express 25(17) 20313-20322 (2017)

Side-polished multimode fiber biosensor based on surface plasmon resonance with halogen light

Hong-Yu Lin, Woo-Hu Tsai, Yu-Chia Tsao, and Bor-Chiou Sheu
Appl. Opt. 46(5) 800-806 (2007)

References

  • View by:
  • |
  • |
  • |

  1. R. W. Wood, “XLII. On a remarkable case of uneven distribution of light in a diffraction grating spectrum,” Philos. Mag. 4(21), 269–275 (1902).
  2. G. Mie, “Beiträge zur Optik trüber Medien, speziell kolloidaler Metallösungen,” Ann. Phys. 2330(3), 377–445 (1908).
    [Crossref]
  3. K. V. Sreekanth, Y. Alapan, M. ElKabbash, E. Ilker, M. Hinczewski, U. A. Gurkan, A. De Luca, and G. Strangi, “Extreme sensitivity biosensing platform based on hyperbolic metamaterials,” Nat. Mater. 15(6), 621–627 (2016).
    [Crossref] [PubMed]
  4. A. Otto, “Excitation of nonradiative surface plasma waves in silver by the method of frustrated total reflection,” Z. Phys. 216(4), 398–410 (1968).
    [Crossref]
  5. E. Kretschmann and H. Raether, “Notizen: Radiative Decay of Non Radiative Surface Plasmons Excited by Light,” Z. Natur. A 23(12), 2315–2316 (1968).
  6. B. Liedberg, C. Nylander, and I. Lunström, “Surface plasmon resonance for gas detection and biosensing,” Sens. Actuators B Chem. 4(83), 299–304 (1983).
    [Crossref]
  7. R. C. Jorgenson and S. S. Yee, “A fiber-optic chemical sensor based on surface plasmon resonance,” Sens. Actuators B Chem. 12(3), 213–220 (1993).
    [Crossref]
  8. M. H. Chiu, S. F. Wang, R. S. Chang, and B. C. Sheu, “D-type fiber biosensor based on surface-plasmon resonance technology and heterodyne interferometry,” Opt. Lett. 30(3), 233–235 (2005).
    [Crossref] [PubMed]
  9. W.-H. Tsai, Y.-C. Tsao, H.-Y. Lin, and B.-C. Sheu, “Cross-point analysis for a multimode fiber sensor based on surface plasmon resonance,” Opt. Lett. 30(17), 2209–2211 (2005).
    [Crossref] [PubMed]
  10. K. Gasior, T. Martynkien, M. Napiorkowski, K. Zolnacz, P. Mergo, and W. Urbanczyk, “A surface plasmon resonance sensor based on a single mode D-shape polymer optical fiber,” J. Opt. 19(2), 025001 (2017).
    [Crossref]
  11. L. Coelho, J. M. M. M. de Almeida, J. L. Santos, R. A. S. Ferreira, P. S. André, and D. Viegas, “Sensing Structure Based on Surface Plasmon Resonance in Chemically Etched Single Mode Optical Fibres,” Plasmonics 10(2), 319–327 (2015).
    [Crossref]
  12. L. C. C. Coelho, H. Moayyed, J. L. Santos, and D. Viegas, “Multiplexing of Surface Plasmon Resonance Sensing Devices on Etched Single-Mode Fiber,” J. Lightwave Technol. 33(2), 432–438 (2015).
    [Crossref]
  13. Y. C. Kim, W. Peng, S. Banerji, and K. S. Booksh, “Tapered fiber optic surface plasmon resonance sensor for analyses of vapor and liquid phases,” Opt. Lett. 30(17), 2218–2220 (2005).
    [Crossref] [PubMed]
  14. J. Zhao, S. Cao, C. Liao, Y. Wang, G. Wang, X. Xu, C. Fu, G. Xu, J. Lian, and Y. Wang, “Surface plasmon resonance refractive sensor based on silver-coated side-polished fiber,” Sens. Actuators B Chem. 230, 206–211 (2016).
    [Crossref]
  15. T. Wu, Y. Shao, Y. Wang, S. Cao, W. Cao, F. Zhang, C. Liao, J. He, Y. Huang, M. Hou, and Y. Wang, “Surface plasmon resonance biosensor based on gold-coated side-polished hexagonal structure photonic crystal fiber,” Opt. Express 25(17), 20313–20322 (2017).
    [Crossref] [PubMed]
  16. T. Huang, “Highly Sensitive SPR Sensor Based on D-shaped Photonic Crystal Fiber Coated with Indium Tin Oxide at Near-Infrared Wavelength,” Plasmonics 12(3), 1–6 (2016).
  17. Z. Liu, Y. Wei, Y. Zhang, Y. Zhang, E. Zhao, J. Yang, and L. Yuan, “Twin-core fiber SPR sensor,” Opt. Lett. 40(12), 2826–2829 (2015).
    [Crossref] [PubMed]
  18. Y. Wang, J. Dong, Y. Luo, J. Tang, H. Lu, J. Yu, H. Guan, J. Zhang, and Z. Chen, “Indium Tin Oxide Coated Two-Mode Fiber for Enhanced SPR Sensor in Near-Infrared Region,” IEEE Sens. J. 9(6), 1 (2017).
  19. P. B. Johnson and R. W. Christy, “Optical Constants of the Noble Metals,” Phys. Rev. B 6(12), 4370–4379 (1972).
    [Crossref]
  20. Y. C. Lin, “Characteristics of optical fiber refractive index sensor based on surface plasmon resonance,” Microw. Opt. Technol. Lett. 55(3), 574–576 (2013).
    [Crossref]
  21. T. Wieduwilt, K. Kirsch, J. Dellith, R. Willsch, and H. Bartelt, “Optical fiber micro-taper with circular symmetric gold coating for sensor applications based on surface plasmon resonance,” Plasmonics 8(2), 545–554 (2013).
    [Crossref]
  22. M. Hautakorpi, M. Mattinen, and H. Ludvigsen, “Surface-plasmon-resonance sensor based on three-hole microstructured optical fiber,” Opt. Express 16(12), 8427–8432 (2008).
    [Crossref] [PubMed]
  23. M. D. Baiad and R. Kashyap, “Concatenation of surface plasmon resonance sensors in a single optical fiber using tilted fiber Bragg gratings,” Opt. Lett. 40(1), 115–118 (2015).
    [Crossref] [PubMed]
  24. https://refractiveindex.info/?shelf=main&book=H2O&page=Hale .

2017 (3)

K. Gasior, T. Martynkien, M. Napiorkowski, K. Zolnacz, P. Mergo, and W. Urbanczyk, “A surface plasmon resonance sensor based on a single mode D-shape polymer optical fiber,” J. Opt. 19(2), 025001 (2017).
[Crossref]

Y. Wang, J. Dong, Y. Luo, J. Tang, H. Lu, J. Yu, H. Guan, J. Zhang, and Z. Chen, “Indium Tin Oxide Coated Two-Mode Fiber for Enhanced SPR Sensor in Near-Infrared Region,” IEEE Sens. J. 9(6), 1 (2017).

T. Wu, Y. Shao, Y. Wang, S. Cao, W. Cao, F. Zhang, C. Liao, J. He, Y. Huang, M. Hou, and Y. Wang, “Surface plasmon resonance biosensor based on gold-coated side-polished hexagonal structure photonic crystal fiber,” Opt. Express 25(17), 20313–20322 (2017).
[Crossref] [PubMed]

2016 (3)

J. Zhao, S. Cao, C. Liao, Y. Wang, G. Wang, X. Xu, C. Fu, G. Xu, J. Lian, and Y. Wang, “Surface plasmon resonance refractive sensor based on silver-coated side-polished fiber,” Sens. Actuators B Chem. 230, 206–211 (2016).
[Crossref]

T. Huang, “Highly Sensitive SPR Sensor Based on D-shaped Photonic Crystal Fiber Coated with Indium Tin Oxide at Near-Infrared Wavelength,” Plasmonics 12(3), 1–6 (2016).

K. V. Sreekanth, Y. Alapan, M. ElKabbash, E. Ilker, M. Hinczewski, U. A. Gurkan, A. De Luca, and G. Strangi, “Extreme sensitivity biosensing platform based on hyperbolic metamaterials,” Nat. Mater. 15(6), 621–627 (2016).
[Crossref] [PubMed]

2015 (4)

2013 (2)

Y. C. Lin, “Characteristics of optical fiber refractive index sensor based on surface plasmon resonance,” Microw. Opt. Technol. Lett. 55(3), 574–576 (2013).
[Crossref]

T. Wieduwilt, K. Kirsch, J. Dellith, R. Willsch, and H. Bartelt, “Optical fiber micro-taper with circular symmetric gold coating for sensor applications based on surface plasmon resonance,” Plasmonics 8(2), 545–554 (2013).
[Crossref]

2008 (1)

2005 (3)

1993 (1)

R. C. Jorgenson and S. S. Yee, “A fiber-optic chemical sensor based on surface plasmon resonance,” Sens. Actuators B Chem. 12(3), 213–220 (1993).
[Crossref]

1983 (1)

B. Liedberg, C. Nylander, and I. Lunström, “Surface plasmon resonance for gas detection and biosensing,” Sens. Actuators B Chem. 4(83), 299–304 (1983).
[Crossref]

1972 (1)

P. B. Johnson and R. W. Christy, “Optical Constants of the Noble Metals,” Phys. Rev. B 6(12), 4370–4379 (1972).
[Crossref]

1968 (2)

A. Otto, “Excitation of nonradiative surface plasma waves in silver by the method of frustrated total reflection,” Z. Phys. 216(4), 398–410 (1968).
[Crossref]

E. Kretschmann and H. Raether, “Notizen: Radiative Decay of Non Radiative Surface Plasmons Excited by Light,” Z. Natur. A 23(12), 2315–2316 (1968).

1908 (1)

G. Mie, “Beiträge zur Optik trüber Medien, speziell kolloidaler Metallösungen,” Ann. Phys. 2330(3), 377–445 (1908).
[Crossref]

1902 (1)

R. W. Wood, “XLII. On a remarkable case of uneven distribution of light in a diffraction grating spectrum,” Philos. Mag. 4(21), 269–275 (1902).

Alapan, Y.

K. V. Sreekanth, Y. Alapan, M. ElKabbash, E. Ilker, M. Hinczewski, U. A. Gurkan, A. De Luca, and G. Strangi, “Extreme sensitivity biosensing platform based on hyperbolic metamaterials,” Nat. Mater. 15(6), 621–627 (2016).
[Crossref] [PubMed]

André, P. S.

L. Coelho, J. M. M. M. de Almeida, J. L. Santos, R. A. S. Ferreira, P. S. André, and D. Viegas, “Sensing Structure Based on Surface Plasmon Resonance in Chemically Etched Single Mode Optical Fibres,” Plasmonics 10(2), 319–327 (2015).
[Crossref]

Baiad, M. D.

Banerji, S.

Bartelt, H.

T. Wieduwilt, K. Kirsch, J. Dellith, R. Willsch, and H. Bartelt, “Optical fiber micro-taper with circular symmetric gold coating for sensor applications based on surface plasmon resonance,” Plasmonics 8(2), 545–554 (2013).
[Crossref]

Booksh, K. S.

Cao, S.

T. Wu, Y. Shao, Y. Wang, S. Cao, W. Cao, F. Zhang, C. Liao, J. He, Y. Huang, M. Hou, and Y. Wang, “Surface plasmon resonance biosensor based on gold-coated side-polished hexagonal structure photonic crystal fiber,” Opt. Express 25(17), 20313–20322 (2017).
[Crossref] [PubMed]

J. Zhao, S. Cao, C. Liao, Y. Wang, G. Wang, X. Xu, C. Fu, G. Xu, J. Lian, and Y. Wang, “Surface plasmon resonance refractive sensor based on silver-coated side-polished fiber,” Sens. Actuators B Chem. 230, 206–211 (2016).
[Crossref]

Cao, W.

Chang, R. S.

Chen, Z.

Y. Wang, J. Dong, Y. Luo, J. Tang, H. Lu, J. Yu, H. Guan, J. Zhang, and Z. Chen, “Indium Tin Oxide Coated Two-Mode Fiber for Enhanced SPR Sensor in Near-Infrared Region,” IEEE Sens. J. 9(6), 1 (2017).

Chiu, M. H.

Christy, R. W.

P. B. Johnson and R. W. Christy, “Optical Constants of the Noble Metals,” Phys. Rev. B 6(12), 4370–4379 (1972).
[Crossref]

Coelho, L.

L. Coelho, J. M. M. M. de Almeida, J. L. Santos, R. A. S. Ferreira, P. S. André, and D. Viegas, “Sensing Structure Based on Surface Plasmon Resonance in Chemically Etched Single Mode Optical Fibres,” Plasmonics 10(2), 319–327 (2015).
[Crossref]

Coelho, L. C. C.

de Almeida, J. M. M. M.

L. Coelho, J. M. M. M. de Almeida, J. L. Santos, R. A. S. Ferreira, P. S. André, and D. Viegas, “Sensing Structure Based on Surface Plasmon Resonance in Chemically Etched Single Mode Optical Fibres,” Plasmonics 10(2), 319–327 (2015).
[Crossref]

De Luca, A.

K. V. Sreekanth, Y. Alapan, M. ElKabbash, E. Ilker, M. Hinczewski, U. A. Gurkan, A. De Luca, and G. Strangi, “Extreme sensitivity biosensing platform based on hyperbolic metamaterials,” Nat. Mater. 15(6), 621–627 (2016).
[Crossref] [PubMed]

Dellith, J.

T. Wieduwilt, K. Kirsch, J. Dellith, R. Willsch, and H. Bartelt, “Optical fiber micro-taper with circular symmetric gold coating for sensor applications based on surface plasmon resonance,” Plasmonics 8(2), 545–554 (2013).
[Crossref]

Dong, J.

Y. Wang, J. Dong, Y. Luo, J. Tang, H. Lu, J. Yu, H. Guan, J. Zhang, and Z. Chen, “Indium Tin Oxide Coated Two-Mode Fiber for Enhanced SPR Sensor in Near-Infrared Region,” IEEE Sens. J. 9(6), 1 (2017).

ElKabbash, M.

K. V. Sreekanth, Y. Alapan, M. ElKabbash, E. Ilker, M. Hinczewski, U. A. Gurkan, A. De Luca, and G. Strangi, “Extreme sensitivity biosensing platform based on hyperbolic metamaterials,” Nat. Mater. 15(6), 621–627 (2016).
[Crossref] [PubMed]

Ferreira, R. A. S.

L. Coelho, J. M. M. M. de Almeida, J. L. Santos, R. A. S. Ferreira, P. S. André, and D. Viegas, “Sensing Structure Based on Surface Plasmon Resonance in Chemically Etched Single Mode Optical Fibres,” Plasmonics 10(2), 319–327 (2015).
[Crossref]

Fu, C.

J. Zhao, S. Cao, C. Liao, Y. Wang, G. Wang, X. Xu, C. Fu, G. Xu, J. Lian, and Y. Wang, “Surface plasmon resonance refractive sensor based on silver-coated side-polished fiber,” Sens. Actuators B Chem. 230, 206–211 (2016).
[Crossref]

Gasior, K.

K. Gasior, T. Martynkien, M. Napiorkowski, K. Zolnacz, P. Mergo, and W. Urbanczyk, “A surface plasmon resonance sensor based on a single mode D-shape polymer optical fiber,” J. Opt. 19(2), 025001 (2017).
[Crossref]

Guan, H.

Y. Wang, J. Dong, Y. Luo, J. Tang, H. Lu, J. Yu, H. Guan, J. Zhang, and Z. Chen, “Indium Tin Oxide Coated Two-Mode Fiber for Enhanced SPR Sensor in Near-Infrared Region,” IEEE Sens. J. 9(6), 1 (2017).

Gurkan, U. A.

K. V. Sreekanth, Y. Alapan, M. ElKabbash, E. Ilker, M. Hinczewski, U. A. Gurkan, A. De Luca, and G. Strangi, “Extreme sensitivity biosensing platform based on hyperbolic metamaterials,” Nat. Mater. 15(6), 621–627 (2016).
[Crossref] [PubMed]

Hautakorpi, M.

He, J.

Hinczewski, M.

K. V. Sreekanth, Y. Alapan, M. ElKabbash, E. Ilker, M. Hinczewski, U. A. Gurkan, A. De Luca, and G. Strangi, “Extreme sensitivity biosensing platform based on hyperbolic metamaterials,” Nat. Mater. 15(6), 621–627 (2016).
[Crossref] [PubMed]

Hou, M.

Huang, T.

T. Huang, “Highly Sensitive SPR Sensor Based on D-shaped Photonic Crystal Fiber Coated with Indium Tin Oxide at Near-Infrared Wavelength,” Plasmonics 12(3), 1–6 (2016).

Huang, Y.

Ilker, E.

K. V. Sreekanth, Y. Alapan, M. ElKabbash, E. Ilker, M. Hinczewski, U. A. Gurkan, A. De Luca, and G. Strangi, “Extreme sensitivity biosensing platform based on hyperbolic metamaterials,” Nat. Mater. 15(6), 621–627 (2016).
[Crossref] [PubMed]

Johnson, P. B.

P. B. Johnson and R. W. Christy, “Optical Constants of the Noble Metals,” Phys. Rev. B 6(12), 4370–4379 (1972).
[Crossref]

Jorgenson, R. C.

R. C. Jorgenson and S. S. Yee, “A fiber-optic chemical sensor based on surface plasmon resonance,” Sens. Actuators B Chem. 12(3), 213–220 (1993).
[Crossref]

Kashyap, R.

Kim, Y. C.

Kirsch, K.

T. Wieduwilt, K. Kirsch, J. Dellith, R. Willsch, and H. Bartelt, “Optical fiber micro-taper with circular symmetric gold coating for sensor applications based on surface plasmon resonance,” Plasmonics 8(2), 545–554 (2013).
[Crossref]

Kretschmann, E.

E. Kretschmann and H. Raether, “Notizen: Radiative Decay of Non Radiative Surface Plasmons Excited by Light,” Z. Natur. A 23(12), 2315–2316 (1968).

Lian, J.

J. Zhao, S. Cao, C. Liao, Y. Wang, G. Wang, X. Xu, C. Fu, G. Xu, J. Lian, and Y. Wang, “Surface plasmon resonance refractive sensor based on silver-coated side-polished fiber,” Sens. Actuators B Chem. 230, 206–211 (2016).
[Crossref]

Liao, C.

T. Wu, Y. Shao, Y. Wang, S. Cao, W. Cao, F. Zhang, C. Liao, J. He, Y. Huang, M. Hou, and Y. Wang, “Surface plasmon resonance biosensor based on gold-coated side-polished hexagonal structure photonic crystal fiber,” Opt. Express 25(17), 20313–20322 (2017).
[Crossref] [PubMed]

J. Zhao, S. Cao, C. Liao, Y. Wang, G. Wang, X. Xu, C. Fu, G. Xu, J. Lian, and Y. Wang, “Surface plasmon resonance refractive sensor based on silver-coated side-polished fiber,” Sens. Actuators B Chem. 230, 206–211 (2016).
[Crossref]

Liedberg, B.

B. Liedberg, C. Nylander, and I. Lunström, “Surface plasmon resonance for gas detection and biosensing,” Sens. Actuators B Chem. 4(83), 299–304 (1983).
[Crossref]

Lin, H.-Y.

Lin, Y. C.

Y. C. Lin, “Characteristics of optical fiber refractive index sensor based on surface plasmon resonance,” Microw. Opt. Technol. Lett. 55(3), 574–576 (2013).
[Crossref]

Liu, Z.

Lu, H.

Y. Wang, J. Dong, Y. Luo, J. Tang, H. Lu, J. Yu, H. Guan, J. Zhang, and Z. Chen, “Indium Tin Oxide Coated Two-Mode Fiber for Enhanced SPR Sensor in Near-Infrared Region,” IEEE Sens. J. 9(6), 1 (2017).

Ludvigsen, H.

Lunström, I.

B. Liedberg, C. Nylander, and I. Lunström, “Surface plasmon resonance for gas detection and biosensing,” Sens. Actuators B Chem. 4(83), 299–304 (1983).
[Crossref]

Luo, Y.

Y. Wang, J. Dong, Y. Luo, J. Tang, H. Lu, J. Yu, H. Guan, J. Zhang, and Z. Chen, “Indium Tin Oxide Coated Two-Mode Fiber for Enhanced SPR Sensor in Near-Infrared Region,” IEEE Sens. J. 9(6), 1 (2017).

Martynkien, T.

K. Gasior, T. Martynkien, M. Napiorkowski, K. Zolnacz, P. Mergo, and W. Urbanczyk, “A surface plasmon resonance sensor based on a single mode D-shape polymer optical fiber,” J. Opt. 19(2), 025001 (2017).
[Crossref]

Mattinen, M.

Mergo, P.

K. Gasior, T. Martynkien, M. Napiorkowski, K. Zolnacz, P. Mergo, and W. Urbanczyk, “A surface plasmon resonance sensor based on a single mode D-shape polymer optical fiber,” J. Opt. 19(2), 025001 (2017).
[Crossref]

Mie, G.

G. Mie, “Beiträge zur Optik trüber Medien, speziell kolloidaler Metallösungen,” Ann. Phys. 2330(3), 377–445 (1908).
[Crossref]

Moayyed, H.

Napiorkowski, M.

K. Gasior, T. Martynkien, M. Napiorkowski, K. Zolnacz, P. Mergo, and W. Urbanczyk, “A surface plasmon resonance sensor based on a single mode D-shape polymer optical fiber,” J. Opt. 19(2), 025001 (2017).
[Crossref]

Nylander, C.

B. Liedberg, C. Nylander, and I. Lunström, “Surface plasmon resonance for gas detection and biosensing,” Sens. Actuators B Chem. 4(83), 299–304 (1983).
[Crossref]

Otto, A.

A. Otto, “Excitation of nonradiative surface plasma waves in silver by the method of frustrated total reflection,” Z. Phys. 216(4), 398–410 (1968).
[Crossref]

Peng, W.

Raether, H.

E. Kretschmann and H. Raether, “Notizen: Radiative Decay of Non Radiative Surface Plasmons Excited by Light,” Z. Natur. A 23(12), 2315–2316 (1968).

Santos, J. L.

L. Coelho, J. M. M. M. de Almeida, J. L. Santos, R. A. S. Ferreira, P. S. André, and D. Viegas, “Sensing Structure Based on Surface Plasmon Resonance in Chemically Etched Single Mode Optical Fibres,” Plasmonics 10(2), 319–327 (2015).
[Crossref]

L. C. C. Coelho, H. Moayyed, J. L. Santos, and D. Viegas, “Multiplexing of Surface Plasmon Resonance Sensing Devices on Etched Single-Mode Fiber,” J. Lightwave Technol. 33(2), 432–438 (2015).
[Crossref]

Shao, Y.

Sheu, B. C.

Sheu, B.-C.

Sreekanth, K. V.

K. V. Sreekanth, Y. Alapan, M. ElKabbash, E. Ilker, M. Hinczewski, U. A. Gurkan, A. De Luca, and G. Strangi, “Extreme sensitivity biosensing platform based on hyperbolic metamaterials,” Nat. Mater. 15(6), 621–627 (2016).
[Crossref] [PubMed]

Strangi, G.

K. V. Sreekanth, Y. Alapan, M. ElKabbash, E. Ilker, M. Hinczewski, U. A. Gurkan, A. De Luca, and G. Strangi, “Extreme sensitivity biosensing platform based on hyperbolic metamaterials,” Nat. Mater. 15(6), 621–627 (2016).
[Crossref] [PubMed]

Tang, J.

Y. Wang, J. Dong, Y. Luo, J. Tang, H. Lu, J. Yu, H. Guan, J. Zhang, and Z. Chen, “Indium Tin Oxide Coated Two-Mode Fiber for Enhanced SPR Sensor in Near-Infrared Region,” IEEE Sens. J. 9(6), 1 (2017).

Tsai, W.-H.

Tsao, Y.-C.

Urbanczyk, W.

K. Gasior, T. Martynkien, M. Napiorkowski, K. Zolnacz, P. Mergo, and W. Urbanczyk, “A surface plasmon resonance sensor based on a single mode D-shape polymer optical fiber,” J. Opt. 19(2), 025001 (2017).
[Crossref]

Viegas, D.

L. Coelho, J. M. M. M. de Almeida, J. L. Santos, R. A. S. Ferreira, P. S. André, and D. Viegas, “Sensing Structure Based on Surface Plasmon Resonance in Chemically Etched Single Mode Optical Fibres,” Plasmonics 10(2), 319–327 (2015).
[Crossref]

L. C. C. Coelho, H. Moayyed, J. L. Santos, and D. Viegas, “Multiplexing of Surface Plasmon Resonance Sensing Devices on Etched Single-Mode Fiber,” J. Lightwave Technol. 33(2), 432–438 (2015).
[Crossref]

Wang, G.

J. Zhao, S. Cao, C. Liao, Y. Wang, G. Wang, X. Xu, C. Fu, G. Xu, J. Lian, and Y. Wang, “Surface plasmon resonance refractive sensor based on silver-coated side-polished fiber,” Sens. Actuators B Chem. 230, 206–211 (2016).
[Crossref]

Wang, S. F.

Wang, Y.

Y. Wang, J. Dong, Y. Luo, J. Tang, H. Lu, J. Yu, H. Guan, J. Zhang, and Z. Chen, “Indium Tin Oxide Coated Two-Mode Fiber for Enhanced SPR Sensor in Near-Infrared Region,” IEEE Sens. J. 9(6), 1 (2017).

T. Wu, Y. Shao, Y. Wang, S. Cao, W. Cao, F. Zhang, C. Liao, J. He, Y. Huang, M. Hou, and Y. Wang, “Surface plasmon resonance biosensor based on gold-coated side-polished hexagonal structure photonic crystal fiber,” Opt. Express 25(17), 20313–20322 (2017).
[Crossref] [PubMed]

T. Wu, Y. Shao, Y. Wang, S. Cao, W. Cao, F. Zhang, C. Liao, J. He, Y. Huang, M. Hou, and Y. Wang, “Surface plasmon resonance biosensor based on gold-coated side-polished hexagonal structure photonic crystal fiber,” Opt. Express 25(17), 20313–20322 (2017).
[Crossref] [PubMed]

J. Zhao, S. Cao, C. Liao, Y. Wang, G. Wang, X. Xu, C. Fu, G. Xu, J. Lian, and Y. Wang, “Surface plasmon resonance refractive sensor based on silver-coated side-polished fiber,” Sens. Actuators B Chem. 230, 206–211 (2016).
[Crossref]

J. Zhao, S. Cao, C. Liao, Y. Wang, G. Wang, X. Xu, C. Fu, G. Xu, J. Lian, and Y. Wang, “Surface plasmon resonance refractive sensor based on silver-coated side-polished fiber,” Sens. Actuators B Chem. 230, 206–211 (2016).
[Crossref]

Wei, Y.

Wieduwilt, T.

T. Wieduwilt, K. Kirsch, J. Dellith, R. Willsch, and H. Bartelt, “Optical fiber micro-taper with circular symmetric gold coating for sensor applications based on surface plasmon resonance,” Plasmonics 8(2), 545–554 (2013).
[Crossref]

Willsch, R.

T. Wieduwilt, K. Kirsch, J. Dellith, R. Willsch, and H. Bartelt, “Optical fiber micro-taper with circular symmetric gold coating for sensor applications based on surface plasmon resonance,” Plasmonics 8(2), 545–554 (2013).
[Crossref]

Wood, R. W.

R. W. Wood, “XLII. On a remarkable case of uneven distribution of light in a diffraction grating spectrum,” Philos. Mag. 4(21), 269–275 (1902).

Wu, T.

Xu, G.

J. Zhao, S. Cao, C. Liao, Y. Wang, G. Wang, X. Xu, C. Fu, G. Xu, J. Lian, and Y. Wang, “Surface plasmon resonance refractive sensor based on silver-coated side-polished fiber,” Sens. Actuators B Chem. 230, 206–211 (2016).
[Crossref]

Xu, X.

J. Zhao, S. Cao, C. Liao, Y. Wang, G. Wang, X. Xu, C. Fu, G. Xu, J. Lian, and Y. Wang, “Surface plasmon resonance refractive sensor based on silver-coated side-polished fiber,” Sens. Actuators B Chem. 230, 206–211 (2016).
[Crossref]

Yang, J.

Yee, S. S.

R. C. Jorgenson and S. S. Yee, “A fiber-optic chemical sensor based on surface plasmon resonance,” Sens. Actuators B Chem. 12(3), 213–220 (1993).
[Crossref]

Yu, J.

Y. Wang, J. Dong, Y. Luo, J. Tang, H. Lu, J. Yu, H. Guan, J. Zhang, and Z. Chen, “Indium Tin Oxide Coated Two-Mode Fiber for Enhanced SPR Sensor in Near-Infrared Region,” IEEE Sens. J. 9(6), 1 (2017).

Yuan, L.

Zhang, F.

Zhang, J.

Y. Wang, J. Dong, Y. Luo, J. Tang, H. Lu, J. Yu, H. Guan, J. Zhang, and Z. Chen, “Indium Tin Oxide Coated Two-Mode Fiber for Enhanced SPR Sensor in Near-Infrared Region,” IEEE Sens. J. 9(6), 1 (2017).

Zhang, Y.

Zhao, E.

Zhao, J.

J. Zhao, S. Cao, C. Liao, Y. Wang, G. Wang, X. Xu, C. Fu, G. Xu, J. Lian, and Y. Wang, “Surface plasmon resonance refractive sensor based on silver-coated side-polished fiber,” Sens. Actuators B Chem. 230, 206–211 (2016).
[Crossref]

Zolnacz, K.

K. Gasior, T. Martynkien, M. Napiorkowski, K. Zolnacz, P. Mergo, and W. Urbanczyk, “A surface plasmon resonance sensor based on a single mode D-shape polymer optical fiber,” J. Opt. 19(2), 025001 (2017).
[Crossref]

Ann. Phys. (1)

G. Mie, “Beiträge zur Optik trüber Medien, speziell kolloidaler Metallösungen,” Ann. Phys. 2330(3), 377–445 (1908).
[Crossref]

IEEE Sens. J. (1)

Y. Wang, J. Dong, Y. Luo, J. Tang, H. Lu, J. Yu, H. Guan, J. Zhang, and Z. Chen, “Indium Tin Oxide Coated Two-Mode Fiber for Enhanced SPR Sensor in Near-Infrared Region,” IEEE Sens. J. 9(6), 1 (2017).

J. Lightwave Technol. (1)

J. Opt. (1)

K. Gasior, T. Martynkien, M. Napiorkowski, K. Zolnacz, P. Mergo, and W. Urbanczyk, “A surface plasmon resonance sensor based on a single mode D-shape polymer optical fiber,” J. Opt. 19(2), 025001 (2017).
[Crossref]

Microw. Opt. Technol. Lett. (1)

Y. C. Lin, “Characteristics of optical fiber refractive index sensor based on surface plasmon resonance,” Microw. Opt. Technol. Lett. 55(3), 574–576 (2013).
[Crossref]

Nat. Mater. (1)

K. V. Sreekanth, Y. Alapan, M. ElKabbash, E. Ilker, M. Hinczewski, U. A. Gurkan, A. De Luca, and G. Strangi, “Extreme sensitivity biosensing platform based on hyperbolic metamaterials,” Nat. Mater. 15(6), 621–627 (2016).
[Crossref] [PubMed]

Opt. Express (2)

Opt. Lett. (5)

Philos. Mag. (1)

R. W. Wood, “XLII. On a remarkable case of uneven distribution of light in a diffraction grating spectrum,” Philos. Mag. 4(21), 269–275 (1902).

Phys. Rev. B (1)

P. B. Johnson and R. W. Christy, “Optical Constants of the Noble Metals,” Phys. Rev. B 6(12), 4370–4379 (1972).
[Crossref]

Plasmonics (3)

T. Wieduwilt, K. Kirsch, J. Dellith, R. Willsch, and H. Bartelt, “Optical fiber micro-taper with circular symmetric gold coating for sensor applications based on surface plasmon resonance,” Plasmonics 8(2), 545–554 (2013).
[Crossref]

T. Huang, “Highly Sensitive SPR Sensor Based on D-shaped Photonic Crystal Fiber Coated with Indium Tin Oxide at Near-Infrared Wavelength,” Plasmonics 12(3), 1–6 (2016).

L. Coelho, J. M. M. M. de Almeida, J. L. Santos, R. A. S. Ferreira, P. S. André, and D. Viegas, “Sensing Structure Based on Surface Plasmon Resonance in Chemically Etched Single Mode Optical Fibres,” Plasmonics 10(2), 319–327 (2015).
[Crossref]

Sens. Actuators B Chem. (3)

J. Zhao, S. Cao, C. Liao, Y. Wang, G. Wang, X. Xu, C. Fu, G. Xu, J. Lian, and Y. Wang, “Surface plasmon resonance refractive sensor based on silver-coated side-polished fiber,” Sens. Actuators B Chem. 230, 206–211 (2016).
[Crossref]

B. Liedberg, C. Nylander, and I. Lunström, “Surface plasmon resonance for gas detection and biosensing,” Sens. Actuators B Chem. 4(83), 299–304 (1983).
[Crossref]

R. C. Jorgenson and S. S. Yee, “A fiber-optic chemical sensor based on surface plasmon resonance,” Sens. Actuators B Chem. 12(3), 213–220 (1993).
[Crossref]

Z. Natur. A (1)

E. Kretschmann and H. Raether, “Notizen: Radiative Decay of Non Radiative Surface Plasmons Excited by Light,” Z. Natur. A 23(12), 2315–2316 (1968).

Z. Phys. (1)

A. Otto, “Excitation of nonradiative surface plasma waves in silver by the method of frustrated total reflection,” Z. Phys. 216(4), 398–410 (1968).
[Crossref]

Other (1)

https://refractiveindex.info/?shelf=main&book=H2O&page=Hale .

Cited By

OSA participates in Crossref's Cited-By Linking service. Citing articles from OSA journals and other participating publishers are listed here.

Alert me when this article is cited.


Figures (5)

Fig. 1
Fig. 1 Dispersion curves for a traditional Kretschmann prism configuration.
Fig. 2
Fig. 2 Schematic diagram of the experimental setup for RI measurements. Insets: cross-section geometry (top-left) and SEM image (top-right) of the sensor.
Fig. 3
Fig. 3 (a) Experimentally obtained transmission spectra, (b) SPR resonant wavelengths in experiment.
Fig. 4
Fig. 4 (a) Simulated loss spectra of the proposed sensor with surrounding RI changing from 1.3000 to 1.3350. (b) SPR resonant wavelengths in simulation.
Fig. 5
Fig. 5 (a) Normalized transmission spectra and (b) resonant wavelengths of the SPR sensor for different mass concentrations of glucose solutions.

Equations (2)

Equations on this page are rendered with MathJax. Learn more.

n core =a 1 +a 2 λ -2 +a 3 λ -4 ,
α loss =8.686 k 0 Im[ n eff ](dB/m),

Metrics