Abstract

It is known that Bessel beam generation with a non-ideal axicon induces beam pattern distortions. In this paper, we introduce a simple method for non-ideal axicon-generated Bessel beam reconstruction by tilting the axicon perpendicular to its optical axis. We found an optimum axicon tilt angle where beam distortions can be compensated by inducing additional astigmatic aberrations. At optimal tilt angle, the central spot symmetry and focal depth was increased. By this method we could control crack formation symmetry in the bulk of glass, which is essential for many transparent material processing applications.

© 2018 Optical Society of America under the terms of the OSA Open Access Publishing Agreement

Full Article  |  PDF Article
OSA Recommended Articles
Non-ideal axicon-generated Bessel beam application for intra-volume glass modification

Juozas Dudutis, Paulius GeČys, and Gediminas RaČiukaitis
Opt. Express 24(25) 28433-28443 (2016)

Tunable Bessel light modes: engineering the axial propagation

Tomáš Čižmár and Kishan Dholakia
Opt. Express 17(18) 15558-15570 (2009)

High speed cleaving of crystals with ultrafast Bessel beams

L. Rapp, R. Meyer, L. Furfaro, C. Billet, R. Giust, and F. Courvoisier
Opt. Express 25(8) 9312-9317 (2017)

References

  • View by:
  • |
  • |
  • |

  1. J. Lopez, K. Mishchik, B. Chassagne, C. Javaux-Leger, C. Honninger, E. Mottay, and R. Kling, “Glass cutting using ultrashort pulsed Bessel beams,” in Proceedings of International Congress on Applications of Laser & Electro-Optics (ICALEO), (2015), pp. 60–69.
  2. M. Kumkar, L. Bauer, S. Russ, M. Wendel, J. Kleiner, D. Grossmann, K. Bergner, and S. Nolte, “Comparison of different processes for separation of glass and crystals using ultrashort pulsed lasers,” Proc. SPIE 8972, 897214 (2014).
    [Crossref]
  3. F. Ahmed, M. S. Lee, H. Sekita, T. Sumiyoshi, and M. Kamata, “Display glass cutting by femtosecond laser induced single shot periodic void array,” Appl. Phys., A Mater. Sci. Process. 93(1), 189–192 (2008).
    [Crossref]
  4. M. K. Bhuyan, O. Jedrkiewicz, V. Sabonis, M. Mikutis, S. Recchia, A. Aprea, M. Bollani, and P. Di Trapani, “High-speed laser-assisted cutting of strong transparent materials using picosecond Bessel beams,” Appl. Phys., A Mater. Sci. Process. 120(2), 443–446 (2015).
    [Crossref]
  5. J. Durnin, “Exact solutions for nondiffracting beams. I. The scalar theory,” J. Opt. Soc. Am. A 4(4), 651–654 (1987).
    [Crossref]
  6. J. Durnin, J. Miceli, and J. H. Eberly, “Diffraction-free beams,” Phys. Rev. Lett. 58(15), 1499–1501 (1987).
    [Crossref] [PubMed]
  7. E. Stankevičius, M. Garliauskas, M. Gedvilas, and G. Račiukaitis, “Bessel-like beam array formation by periodical arrangement of the polymeric round-tip microstructures,” Opt. Express 23(22), 28557–28566 (2015).
    [Crossref] [PubMed]
  8. M. Duocastella and C. B. Arnold, “Bessel and annular beams for materials processing,” Laser Photonics Rev. 6(5), 607–621 (2012).
    [Crossref]
  9. O. Brzobohatý, T. Cizmár, and P. Zemánek, “High quality quasi-Bessel beam generated by round-tip axicon,” Opt. Express 16(17), 12688–12700 (2008).
    [Crossref] [PubMed]
  10. P. Wu, C. Sui, and W. Huang, “Theoretical analysis of a quasi-Bessel beam for laser ablation,” Photon. Res. 2(3), 82–86 (2014).
    [Crossref]
  11. S. Akturk, B. Zhou, B. Pasquiou, M. Franco, and A. Mysyrowicz, “Intensity distribution around the focal regions of real axicons,” Opt. Commun. 281(17), 4240–4244 (2008).
    [Crossref]
  12. X. Zeng and F. Wu, “Effect of elliptical manufacture error of an axicon on the diffraction-free beam patterns,” Opt. Eng. 47(8), 083401 (2008).
    [Crossref]
  13. J. Dudutis, P. GeČys, and G. RaČiukaitis, “Non-ideal axicon-generated Bessel beam application for intra-volume glass modification,” Opt. Express 24(25), 28433–28443 (2016).
    [Crossref] [PubMed]
  14. R. Meyer, M. Jacquot, R. Giust, J. Safioui, L. Rapp, L. Furfaro, P.-A. Lacourt, J. M. Dudley, and F. Courvoisier, “Single-shot ultrafast laser processing of high-aspect-ratio nanochannels using elliptical Bessel beams,” Opt. Lett. 42(21), 4307–4310 (2017).
    [Crossref] [PubMed]
  15. R. Meyer, R. Giust, M. Jacquot, J. M. Dudley, and F. Courvoisier, “Submicron-quality cleaving of glass with elliptical ultrafast Bessel beams,” Appl. Phys. Lett. 111(23), 231108 (2017).
    [Crossref]
  16. L. Rapp, R. Meyer, L. Furfaro, C. Billet, R. Giust, and F. Courvoisier, “High speed cleaving of crystals with ultrafast Bessel beams,” Opt. Express 25(8), 9312–9317 (2017).
    [Crossref] [PubMed]
  17. K. Mishchik, R. Beuton, O. Dematteo Caulier, S. Skupin, B. Chimier, G. Duchateau, B. Chassagne, R. Kling, C. Hönninger, E. Mottay, and J. Lopez, “Improved laser glass cutting by spatio-temporal control of energy deposition using bursts of femtosecond pulses,” Opt. Express 25(26), 33271–33282 (2017).
    [Crossref]
  18. Y. Matsuoka, Y. Kizuka, and T. Inoue, “The characteristics of laser micro drilling using a Bessel beam,” Appl. Phys., A Mater. Sci. Process. 84(4), 423–430 (2006).
    [Crossref]
  19. S. Mitra, M. Chanal, R. Clady, A. Mouskeftaras, and D. Grojo, “Millijoule femtosecond micro-Bessel beams for ultra-high aspect ratio machining,” Appl. Opt. 54(24), 7358–7365 (2015).
    [Crossref] [PubMed]
  20. M. Mikutis, T. Kudrius, G. Slekys, D. Paipulas, and S. Juodkazis, “High 90% efficiency Bragg gratings formed in fused silica by femtosecond Gauss-Bessel laser beams,” Opt. Mater. Express 3(11), 1862–1871 (2013).
    [Crossref]
  21. C. Parigger, Y. Tang, D. H. Plemmons, and J. W. Lewis, “Spherical aberration effects in lens-axicon doublets: theoretical study,” Appl. Opt. 36(31), 8214–8221 (1997).
    [Crossref] [PubMed]
  22. Z. Bin and L. Zhu, “Diffraction property of an axicon in oblique illumination,” Appl. Opt. 37(13), 2563–2568 (1998).
    [Crossref] [PubMed]
  23. A. Thaning, Z. Jaroszewicz, and A. T. Friberg, “Diffractive axicons in oblique illumination: analysis and experiments and comparison with elliptical axicons,” Appl. Opt. 42(1), 9–17 (2003).
    [Crossref] [PubMed]
  24. J. Dudutis, P. Gečys, and G. Račiukaitis, “Modification of glass using an axicon-generated non-symmetrical Bessel-Gaussian beam,” Proc. SPIE 10091, 100910 (2017).
    [Crossref]
  25. D. G. Voelz, Computational Fourier Optics: A MATLAB Tutorial (SPIE, 2011).
  26. M. K. Bhuyan, F. Courvoisier, P. A. Lacourt, M. Jacquot, L. Furfaro, M. J. Withford, and J. M. Dudley, “High aspect ratio taper-free microchannel fabrication using femtosecond Bessel beams,” Opt. Express 18(2), 566–574 (2010).
    [Crossref] [PubMed]

2017 (5)

2016 (1)

2015 (3)

2014 (2)

P. Wu, C. Sui, and W. Huang, “Theoretical analysis of a quasi-Bessel beam for laser ablation,” Photon. Res. 2(3), 82–86 (2014).
[Crossref]

M. Kumkar, L. Bauer, S. Russ, M. Wendel, J. Kleiner, D. Grossmann, K. Bergner, and S. Nolte, “Comparison of different processes for separation of glass and crystals using ultrashort pulsed lasers,” Proc. SPIE 8972, 897214 (2014).
[Crossref]

2013 (1)

2012 (1)

M. Duocastella and C. B. Arnold, “Bessel and annular beams for materials processing,” Laser Photonics Rev. 6(5), 607–621 (2012).
[Crossref]

2010 (1)

2008 (4)

O. Brzobohatý, T. Cizmár, and P. Zemánek, “High quality quasi-Bessel beam generated by round-tip axicon,” Opt. Express 16(17), 12688–12700 (2008).
[Crossref] [PubMed]

S. Akturk, B. Zhou, B. Pasquiou, M. Franco, and A. Mysyrowicz, “Intensity distribution around the focal regions of real axicons,” Opt. Commun. 281(17), 4240–4244 (2008).
[Crossref]

X. Zeng and F. Wu, “Effect of elliptical manufacture error of an axicon on the diffraction-free beam patterns,” Opt. Eng. 47(8), 083401 (2008).
[Crossref]

F. Ahmed, M. S. Lee, H. Sekita, T. Sumiyoshi, and M. Kamata, “Display glass cutting by femtosecond laser induced single shot periodic void array,” Appl. Phys., A Mater. Sci. Process. 93(1), 189–192 (2008).
[Crossref]

2006 (1)

Y. Matsuoka, Y. Kizuka, and T. Inoue, “The characteristics of laser micro drilling using a Bessel beam,” Appl. Phys., A Mater. Sci. Process. 84(4), 423–430 (2006).
[Crossref]

2003 (1)

1998 (1)

1997 (1)

1987 (2)

J. Durnin, “Exact solutions for nondiffracting beams. I. The scalar theory,” J. Opt. Soc. Am. A 4(4), 651–654 (1987).
[Crossref]

J. Durnin, J. Miceli, and J. H. Eberly, “Diffraction-free beams,” Phys. Rev. Lett. 58(15), 1499–1501 (1987).
[Crossref] [PubMed]

Ahmed, F.

F. Ahmed, M. S. Lee, H. Sekita, T. Sumiyoshi, and M. Kamata, “Display glass cutting by femtosecond laser induced single shot periodic void array,” Appl. Phys., A Mater. Sci. Process. 93(1), 189–192 (2008).
[Crossref]

Akturk, S.

S. Akturk, B. Zhou, B. Pasquiou, M. Franco, and A. Mysyrowicz, “Intensity distribution around the focal regions of real axicons,” Opt. Commun. 281(17), 4240–4244 (2008).
[Crossref]

Aprea, A.

M. K. Bhuyan, O. Jedrkiewicz, V. Sabonis, M. Mikutis, S. Recchia, A. Aprea, M. Bollani, and P. Di Trapani, “High-speed laser-assisted cutting of strong transparent materials using picosecond Bessel beams,” Appl. Phys., A Mater. Sci. Process. 120(2), 443–446 (2015).
[Crossref]

Arnold, C. B.

M. Duocastella and C. B. Arnold, “Bessel and annular beams for materials processing,” Laser Photonics Rev. 6(5), 607–621 (2012).
[Crossref]

Bauer, L.

M. Kumkar, L. Bauer, S. Russ, M. Wendel, J. Kleiner, D. Grossmann, K. Bergner, and S. Nolte, “Comparison of different processes for separation of glass and crystals using ultrashort pulsed lasers,” Proc. SPIE 8972, 897214 (2014).
[Crossref]

Bergner, K.

M. Kumkar, L. Bauer, S. Russ, M. Wendel, J. Kleiner, D. Grossmann, K. Bergner, and S. Nolte, “Comparison of different processes for separation of glass and crystals using ultrashort pulsed lasers,” Proc. SPIE 8972, 897214 (2014).
[Crossref]

Beuton, R.

Bhuyan, M. K.

M. K. Bhuyan, O. Jedrkiewicz, V. Sabonis, M. Mikutis, S. Recchia, A. Aprea, M. Bollani, and P. Di Trapani, “High-speed laser-assisted cutting of strong transparent materials using picosecond Bessel beams,” Appl. Phys., A Mater. Sci. Process. 120(2), 443–446 (2015).
[Crossref]

M. K. Bhuyan, F. Courvoisier, P. A. Lacourt, M. Jacquot, L. Furfaro, M. J. Withford, and J. M. Dudley, “High aspect ratio taper-free microchannel fabrication using femtosecond Bessel beams,” Opt. Express 18(2), 566–574 (2010).
[Crossref] [PubMed]

Billet, C.

Bin, Z.

Bollani, M.

M. K. Bhuyan, O. Jedrkiewicz, V. Sabonis, M. Mikutis, S. Recchia, A. Aprea, M. Bollani, and P. Di Trapani, “High-speed laser-assisted cutting of strong transparent materials using picosecond Bessel beams,” Appl. Phys., A Mater. Sci. Process. 120(2), 443–446 (2015).
[Crossref]

Brzobohatý, O.

Chanal, M.

Chassagne, B.

K. Mishchik, R. Beuton, O. Dematteo Caulier, S. Skupin, B. Chimier, G. Duchateau, B. Chassagne, R. Kling, C. Hönninger, E. Mottay, and J. Lopez, “Improved laser glass cutting by spatio-temporal control of energy deposition using bursts of femtosecond pulses,” Opt. Express 25(26), 33271–33282 (2017).
[Crossref]

J. Lopez, K. Mishchik, B. Chassagne, C. Javaux-Leger, C. Honninger, E. Mottay, and R. Kling, “Glass cutting using ultrashort pulsed Bessel beams,” in Proceedings of International Congress on Applications of Laser & Electro-Optics (ICALEO), (2015), pp. 60–69.

Chimier, B.

Cizmár, T.

Clady, R.

Courvoisier, F.

Dematteo Caulier, O.

Di Trapani, P.

M. K. Bhuyan, O. Jedrkiewicz, V. Sabonis, M. Mikutis, S. Recchia, A. Aprea, M. Bollani, and P. Di Trapani, “High-speed laser-assisted cutting of strong transparent materials using picosecond Bessel beams,” Appl. Phys., A Mater. Sci. Process. 120(2), 443–446 (2015).
[Crossref]

Duchateau, G.

Dudley, J. M.

Dudutis, J.

J. Dudutis, P. Gečys, and G. Račiukaitis, “Modification of glass using an axicon-generated non-symmetrical Bessel-Gaussian beam,” Proc. SPIE 10091, 100910 (2017).
[Crossref]

J. Dudutis, P. GeČys, and G. RaČiukaitis, “Non-ideal axicon-generated Bessel beam application for intra-volume glass modification,” Opt. Express 24(25), 28433–28443 (2016).
[Crossref] [PubMed]

Duocastella, M.

M. Duocastella and C. B. Arnold, “Bessel and annular beams for materials processing,” Laser Photonics Rev. 6(5), 607–621 (2012).
[Crossref]

Durnin, J.

J. Durnin, “Exact solutions for nondiffracting beams. I. The scalar theory,” J. Opt. Soc. Am. A 4(4), 651–654 (1987).
[Crossref]

J. Durnin, J. Miceli, and J. H. Eberly, “Diffraction-free beams,” Phys. Rev. Lett. 58(15), 1499–1501 (1987).
[Crossref] [PubMed]

Eberly, J. H.

J. Durnin, J. Miceli, and J. H. Eberly, “Diffraction-free beams,” Phys. Rev. Lett. 58(15), 1499–1501 (1987).
[Crossref] [PubMed]

Franco, M.

S. Akturk, B. Zhou, B. Pasquiou, M. Franco, and A. Mysyrowicz, “Intensity distribution around the focal regions of real axicons,” Opt. Commun. 281(17), 4240–4244 (2008).
[Crossref]

Friberg, A. T.

Furfaro, L.

Garliauskas, M.

Gecys, P.

J. Dudutis, P. Gečys, and G. Račiukaitis, “Modification of glass using an axicon-generated non-symmetrical Bessel-Gaussian beam,” Proc. SPIE 10091, 100910 (2017).
[Crossref]

J. Dudutis, P. GeČys, and G. RaČiukaitis, “Non-ideal axicon-generated Bessel beam application for intra-volume glass modification,” Opt. Express 24(25), 28433–28443 (2016).
[Crossref] [PubMed]

Gedvilas, M.

Giust, R.

Grojo, D.

Grossmann, D.

M. Kumkar, L. Bauer, S. Russ, M. Wendel, J. Kleiner, D. Grossmann, K. Bergner, and S. Nolte, “Comparison of different processes for separation of glass and crystals using ultrashort pulsed lasers,” Proc. SPIE 8972, 897214 (2014).
[Crossref]

Honninger, C.

J. Lopez, K. Mishchik, B. Chassagne, C. Javaux-Leger, C. Honninger, E. Mottay, and R. Kling, “Glass cutting using ultrashort pulsed Bessel beams,” in Proceedings of International Congress on Applications of Laser & Electro-Optics (ICALEO), (2015), pp. 60–69.

Hönninger, C.

Huang, W.

Inoue, T.

Y. Matsuoka, Y. Kizuka, and T. Inoue, “The characteristics of laser micro drilling using a Bessel beam,” Appl. Phys., A Mater. Sci. Process. 84(4), 423–430 (2006).
[Crossref]

Jacquot, M.

Jaroszewicz, Z.

Javaux-Leger, C.

J. Lopez, K. Mishchik, B. Chassagne, C. Javaux-Leger, C. Honninger, E. Mottay, and R. Kling, “Glass cutting using ultrashort pulsed Bessel beams,” in Proceedings of International Congress on Applications of Laser & Electro-Optics (ICALEO), (2015), pp. 60–69.

Jedrkiewicz, O.

M. K. Bhuyan, O. Jedrkiewicz, V. Sabonis, M. Mikutis, S. Recchia, A. Aprea, M. Bollani, and P. Di Trapani, “High-speed laser-assisted cutting of strong transparent materials using picosecond Bessel beams,” Appl. Phys., A Mater. Sci. Process. 120(2), 443–446 (2015).
[Crossref]

Juodkazis, S.

Kamata, M.

F. Ahmed, M. S. Lee, H. Sekita, T. Sumiyoshi, and M. Kamata, “Display glass cutting by femtosecond laser induced single shot periodic void array,” Appl. Phys., A Mater. Sci. Process. 93(1), 189–192 (2008).
[Crossref]

Kizuka, Y.

Y. Matsuoka, Y. Kizuka, and T. Inoue, “The characteristics of laser micro drilling using a Bessel beam,” Appl. Phys., A Mater. Sci. Process. 84(4), 423–430 (2006).
[Crossref]

Kleiner, J.

M. Kumkar, L. Bauer, S. Russ, M. Wendel, J. Kleiner, D. Grossmann, K. Bergner, and S. Nolte, “Comparison of different processes for separation of glass and crystals using ultrashort pulsed lasers,” Proc. SPIE 8972, 897214 (2014).
[Crossref]

Kling, R.

K. Mishchik, R. Beuton, O. Dematteo Caulier, S. Skupin, B. Chimier, G. Duchateau, B. Chassagne, R. Kling, C. Hönninger, E. Mottay, and J. Lopez, “Improved laser glass cutting by spatio-temporal control of energy deposition using bursts of femtosecond pulses,” Opt. Express 25(26), 33271–33282 (2017).
[Crossref]

J. Lopez, K. Mishchik, B. Chassagne, C. Javaux-Leger, C. Honninger, E. Mottay, and R. Kling, “Glass cutting using ultrashort pulsed Bessel beams,” in Proceedings of International Congress on Applications of Laser & Electro-Optics (ICALEO), (2015), pp. 60–69.

Kudrius, T.

Kumkar, M.

M. Kumkar, L. Bauer, S. Russ, M. Wendel, J. Kleiner, D. Grossmann, K. Bergner, and S. Nolte, “Comparison of different processes for separation of glass and crystals using ultrashort pulsed lasers,” Proc. SPIE 8972, 897214 (2014).
[Crossref]

Lacourt, P. A.

Lacourt, P.-A.

Lee, M. S.

F. Ahmed, M. S. Lee, H. Sekita, T. Sumiyoshi, and M. Kamata, “Display glass cutting by femtosecond laser induced single shot periodic void array,” Appl. Phys., A Mater. Sci. Process. 93(1), 189–192 (2008).
[Crossref]

Lewis, J. W.

Lopez, J.

K. Mishchik, R. Beuton, O. Dematteo Caulier, S. Skupin, B. Chimier, G. Duchateau, B. Chassagne, R. Kling, C. Hönninger, E. Mottay, and J. Lopez, “Improved laser glass cutting by spatio-temporal control of energy deposition using bursts of femtosecond pulses,” Opt. Express 25(26), 33271–33282 (2017).
[Crossref]

J. Lopez, K. Mishchik, B. Chassagne, C. Javaux-Leger, C. Honninger, E. Mottay, and R. Kling, “Glass cutting using ultrashort pulsed Bessel beams,” in Proceedings of International Congress on Applications of Laser & Electro-Optics (ICALEO), (2015), pp. 60–69.

Matsuoka, Y.

Y. Matsuoka, Y. Kizuka, and T. Inoue, “The characteristics of laser micro drilling using a Bessel beam,” Appl. Phys., A Mater. Sci. Process. 84(4), 423–430 (2006).
[Crossref]

Meyer, R.

Miceli, J.

J. Durnin, J. Miceli, and J. H. Eberly, “Diffraction-free beams,” Phys. Rev. Lett. 58(15), 1499–1501 (1987).
[Crossref] [PubMed]

Mikutis, M.

M. K. Bhuyan, O. Jedrkiewicz, V. Sabonis, M. Mikutis, S. Recchia, A. Aprea, M. Bollani, and P. Di Trapani, “High-speed laser-assisted cutting of strong transparent materials using picosecond Bessel beams,” Appl. Phys., A Mater. Sci. Process. 120(2), 443–446 (2015).
[Crossref]

M. Mikutis, T. Kudrius, G. Slekys, D. Paipulas, and S. Juodkazis, “High 90% efficiency Bragg gratings formed in fused silica by femtosecond Gauss-Bessel laser beams,” Opt. Mater. Express 3(11), 1862–1871 (2013).
[Crossref]

Mishchik, K.

K. Mishchik, R. Beuton, O. Dematteo Caulier, S. Skupin, B. Chimier, G. Duchateau, B. Chassagne, R. Kling, C. Hönninger, E. Mottay, and J. Lopez, “Improved laser glass cutting by spatio-temporal control of energy deposition using bursts of femtosecond pulses,” Opt. Express 25(26), 33271–33282 (2017).
[Crossref]

J. Lopez, K. Mishchik, B. Chassagne, C. Javaux-Leger, C. Honninger, E. Mottay, and R. Kling, “Glass cutting using ultrashort pulsed Bessel beams,” in Proceedings of International Congress on Applications of Laser & Electro-Optics (ICALEO), (2015), pp. 60–69.

Mitra, S.

Mottay, E.

K. Mishchik, R. Beuton, O. Dematteo Caulier, S. Skupin, B. Chimier, G. Duchateau, B. Chassagne, R. Kling, C. Hönninger, E. Mottay, and J. Lopez, “Improved laser glass cutting by spatio-temporal control of energy deposition using bursts of femtosecond pulses,” Opt. Express 25(26), 33271–33282 (2017).
[Crossref]

J. Lopez, K. Mishchik, B. Chassagne, C. Javaux-Leger, C. Honninger, E. Mottay, and R. Kling, “Glass cutting using ultrashort pulsed Bessel beams,” in Proceedings of International Congress on Applications of Laser & Electro-Optics (ICALEO), (2015), pp. 60–69.

Mouskeftaras, A.

Mysyrowicz, A.

S. Akturk, B. Zhou, B. Pasquiou, M. Franco, and A. Mysyrowicz, “Intensity distribution around the focal regions of real axicons,” Opt. Commun. 281(17), 4240–4244 (2008).
[Crossref]

Nolte, S.

M. Kumkar, L. Bauer, S. Russ, M. Wendel, J. Kleiner, D. Grossmann, K. Bergner, and S. Nolte, “Comparison of different processes for separation of glass and crystals using ultrashort pulsed lasers,” Proc. SPIE 8972, 897214 (2014).
[Crossref]

Paipulas, D.

Parigger, C.

Pasquiou, B.

S. Akturk, B. Zhou, B. Pasquiou, M. Franco, and A. Mysyrowicz, “Intensity distribution around the focal regions of real axicons,” Opt. Commun. 281(17), 4240–4244 (2008).
[Crossref]

Plemmons, D. H.

Raciukaitis, G.

Rapp, L.

Recchia, S.

M. K. Bhuyan, O. Jedrkiewicz, V. Sabonis, M. Mikutis, S. Recchia, A. Aprea, M. Bollani, and P. Di Trapani, “High-speed laser-assisted cutting of strong transparent materials using picosecond Bessel beams,” Appl. Phys., A Mater. Sci. Process. 120(2), 443–446 (2015).
[Crossref]

Russ, S.

M. Kumkar, L. Bauer, S. Russ, M. Wendel, J. Kleiner, D. Grossmann, K. Bergner, and S. Nolte, “Comparison of different processes for separation of glass and crystals using ultrashort pulsed lasers,” Proc. SPIE 8972, 897214 (2014).
[Crossref]

Sabonis, V.

M. K. Bhuyan, O. Jedrkiewicz, V. Sabonis, M. Mikutis, S. Recchia, A. Aprea, M. Bollani, and P. Di Trapani, “High-speed laser-assisted cutting of strong transparent materials using picosecond Bessel beams,” Appl. Phys., A Mater. Sci. Process. 120(2), 443–446 (2015).
[Crossref]

Safioui, J.

Sekita, H.

F. Ahmed, M. S. Lee, H. Sekita, T. Sumiyoshi, and M. Kamata, “Display glass cutting by femtosecond laser induced single shot periodic void array,” Appl. Phys., A Mater. Sci. Process. 93(1), 189–192 (2008).
[Crossref]

Skupin, S.

Slekys, G.

Stankevicius, E.

Sui, C.

Sumiyoshi, T.

F. Ahmed, M. S. Lee, H. Sekita, T. Sumiyoshi, and M. Kamata, “Display glass cutting by femtosecond laser induced single shot periodic void array,” Appl. Phys., A Mater. Sci. Process. 93(1), 189–192 (2008).
[Crossref]

Tang, Y.

Thaning, A.

Wendel, M.

M. Kumkar, L. Bauer, S. Russ, M. Wendel, J. Kleiner, D. Grossmann, K. Bergner, and S. Nolte, “Comparison of different processes for separation of glass and crystals using ultrashort pulsed lasers,” Proc. SPIE 8972, 897214 (2014).
[Crossref]

Withford, M. J.

Wu, F.

X. Zeng and F. Wu, “Effect of elliptical manufacture error of an axicon on the diffraction-free beam patterns,” Opt. Eng. 47(8), 083401 (2008).
[Crossref]

Wu, P.

Zemánek, P.

Zeng, X.

X. Zeng and F. Wu, “Effect of elliptical manufacture error of an axicon on the diffraction-free beam patterns,” Opt. Eng. 47(8), 083401 (2008).
[Crossref]

Zhou, B.

S. Akturk, B. Zhou, B. Pasquiou, M. Franco, and A. Mysyrowicz, “Intensity distribution around the focal regions of real axicons,” Opt. Commun. 281(17), 4240–4244 (2008).
[Crossref]

Zhu, L.

Appl. Opt. (4)

Appl. Phys. Lett. (1)

R. Meyer, R. Giust, M. Jacquot, J. M. Dudley, and F. Courvoisier, “Submicron-quality cleaving of glass with elliptical ultrafast Bessel beams,” Appl. Phys. Lett. 111(23), 231108 (2017).
[Crossref]

Appl. Phys., A Mater. Sci. Process. (3)

Y. Matsuoka, Y. Kizuka, and T. Inoue, “The characteristics of laser micro drilling using a Bessel beam,” Appl. Phys., A Mater. Sci. Process. 84(4), 423–430 (2006).
[Crossref]

F. Ahmed, M. S. Lee, H. Sekita, T. Sumiyoshi, and M. Kamata, “Display glass cutting by femtosecond laser induced single shot periodic void array,” Appl. Phys., A Mater. Sci. Process. 93(1), 189–192 (2008).
[Crossref]

M. K. Bhuyan, O. Jedrkiewicz, V. Sabonis, M. Mikutis, S. Recchia, A. Aprea, M. Bollani, and P. Di Trapani, “High-speed laser-assisted cutting of strong transparent materials using picosecond Bessel beams,” Appl. Phys., A Mater. Sci. Process. 120(2), 443–446 (2015).
[Crossref]

J. Opt. Soc. Am. A (1)

Laser Photonics Rev. (1)

M. Duocastella and C. B. Arnold, “Bessel and annular beams for materials processing,” Laser Photonics Rev. 6(5), 607–621 (2012).
[Crossref]

Opt. Commun. (1)

S. Akturk, B. Zhou, B. Pasquiou, M. Franco, and A. Mysyrowicz, “Intensity distribution around the focal regions of real axicons,” Opt. Commun. 281(17), 4240–4244 (2008).
[Crossref]

Opt. Eng. (1)

X. Zeng and F. Wu, “Effect of elliptical manufacture error of an axicon on the diffraction-free beam patterns,” Opt. Eng. 47(8), 083401 (2008).
[Crossref]

Opt. Express (6)

Opt. Lett. (1)

Opt. Mater. Express (1)

Photon. Res. (1)

Phys. Rev. Lett. (1)

J. Durnin, J. Miceli, and J. H. Eberly, “Diffraction-free beams,” Phys. Rev. Lett. 58(15), 1499–1501 (1987).
[Crossref] [PubMed]

Proc. SPIE (2)

M. Kumkar, L. Bauer, S. Russ, M. Wendel, J. Kleiner, D. Grossmann, K. Bergner, and S. Nolte, “Comparison of different processes for separation of glass and crystals using ultrashort pulsed lasers,” Proc. SPIE 8972, 897214 (2014).
[Crossref]

J. Dudutis, P. Gečys, and G. Račiukaitis, “Modification of glass using an axicon-generated non-symmetrical Bessel-Gaussian beam,” Proc. SPIE 10091, 100910 (2017).
[Crossref]

Other (2)

D. G. Voelz, Computational Fourier Optics: A MATLAB Tutorial (SPIE, 2011).

J. Lopez, K. Mishchik, B. Chassagne, C. Javaux-Leger, C. Honninger, E. Mottay, and R. Kling, “Glass cutting using ultrashort pulsed Bessel beams,” in Proceedings of International Congress on Applications of Laser & Electro-Optics (ICALEO), (2015), pp. 60–69.

Cited By

OSA participates in Crossref's Cited-By Linking service. Citing articles from OSA journals and other participating publishers are listed here.

Alert me when this article is cited.


Figures (6)

Fig. 1
Fig. 1 In (a) the axicon profile and cross-section ellipticity versus transverse distance to the optical axis. In (b, c) axicon rotation around its axis and tilt operation. In (d) the optical demagnification system.
Fig. 2
Fig. 2 Non-tilted axicon-generated Bessel beam distribution behind the conical lens. In (a) the beam intensity distribution in the XZ plane, generated by the oblate tip axicon with variable cross-section ellipticity. (b) Bessel beam central core ellipticity. In (c) Bessel beam distribution in the XY plane at Z distance equal to 18 mm and 26 mm. The axicon placement is at the top of the image at Z position equal to 0.
Fig. 3
Fig. 3 Tilted axicon-generated Bessel beam distribution measurement behind the conical lens. In (a) simulated and experimentally measured Bessel beam patterns versus axicon tilt angle. (b) The beam ellipticity in the XY plane versus axicon tilt angle.
Fig. 4
Fig. 4 In (a) Bessel beam core ellipticity versus distance Z for 0 and 10 deg tilt. (c) On-axis intensity of the Bessel beam generated with 0 and 10 deg tilted axicon. The axicon placement is on the left of the image at Z position equal to 0. The measurements were performed behind the conical lens.
Fig. 5
Fig. 5 Side view of the Bessel beam induced single-shot modifications in glass at XZ and YZ observation planes for different axicon tilt angles. Beam propagation direction from left to right.
Fig. 6
Fig. 6 Laser-induced modification behavior versus axicon tilt angle. In (a) Top view of the axicon rotation procedure. (b) Laser-induced modification behavior when rotation axis is perpendicular to the major axis of the ellipse-shaped axicon cross-section. In (c) Top view of the axicon rotation procedure. (d) Laser-induced modification behavior when rotation axis is parallel to the major axis of the ellipse-shaped axicon cross-section.

Equations (10)

Equations on this page are rendered with MathJax. Learn more.

ellip(x,y)=Bexp( x 2 + y 2 t )+elli p 0 .
I(r) J 0 2 (2.4048r/ r 0 ).
U 1 (x,y)= U 0 exp( x 2 + y 2 ω 0 2 +ik(n1)d(x,y) ),
U 2 (x,y)= 1 { ( U 1 (x,y))H( f X 2 + f Y 2 ) },
H( f X , f Y )= e jkz exp[ jπλz|( f X 2 + f Y 2 ) ],
z =zcosαxsinα, x =zsinα+xcosα, y =y.
( d(x,y)+ d(x,y) x Δx )sinα+(x+Δx)cosα=x, Δx= x(1cosα)d(x,y)sinα d(x,y) x sinα+cosα x(1cosα)d(x,y)sinα cosα .
d ' tilted (x,y)=d(x+Δx,y)cosα(x+Δx)sinα.
d tilted (x,y)= d tilted (x,y)+xtanα=d(x+Δx,y)cosα(x+Δx)sinα+xtanα.
x =xcosβxsinβ, y'=xsinβycosβ.

Metrics