Abstract

A technique using RGB color filters is proposed for creating high-quality full-color computer-generated holograms (CGHs). The fringe of these CGHs is composed of more than a billion pixels. The CGHs reconstruct full-parallax three-dimensional color images with a deep sensation of depth caused by natural motion parallax. The simulation technique as well as the principle and challenges of high-quality full-color reconstruction are presented to address the design of filter properties suitable for large-scaled CGHs. Optical reconstructions of actual fabricated full-color CGHs are demonstrated in order to verify the proposed techniques.

© 2017 Optical Society of America

Full Article  |  PDF Article
OSA Recommended Articles
Full parallax viewing-angle enhanced computer-generated holographic 3D display system using integral lens array

Kyongsik Choi, Joohwan Kim, Yongjun Lim, and Byoungho Lee
Opt. Express 13(26) 10494-10502 (2005)

Full-color computer-generated holograms using 3-D Fourier spectra

Yusuke Sando, Masahide Itoh, and Toyohiko Yatagai
Opt. Express 12(25) 6246-6251 (2004)

Rendering of specular surfaces in polygon-based computer-generated holograms

Hirohito Nishi, Kyoji Matsushima, and Sumio Nakahara
Appl. Opt. 50(34) H245-H252 (2011)

References

  • View by:
  • |
  • |
  • |

  1. K. Matsushima and S. Nakahara, “Extremely high-definition full-parallax computer-generated hologram created by the polygon-based method,” Appl. Opt. 48(34), H54–H63 (2009).
    [Crossref] [PubMed]
  2. K. Matsushima, Y. Arima, and S. Nakahara, “Digitized holography: modern holography for 3D imaging of virtual and real objects,” Appl. Opt. 50(34), H278–H284 (2011).
    [Crossref] [PubMed]
  3. K. Matsushima, H. Nishi, and S. Nakahara, “Simple wave-field rendering for photorealistic reconstruction in polygon-based high-definition computer holography,” J. Electron. Imaging 21(2), 023002 (2012).
    [Crossref]
  4. K. Matsushima and S. Nakahara, “Stepping closer to the perfect 3D digital image,” SPIE Newsroom (2012).
  5. K. Matsushima, M. Nakamura, and S. Nakahara, “Silhouette method for hidden surface removal in computer holography and its acceleration using the switch-back technique,” Opt. Express 22(20), 24450–24465 (2014).
    [Crossref] [PubMed]
  6. F. Yang, Y. Murakami, and M. Yamaguchi, “Digital color management in full-color holographic three-dimensional printer,” Appl. Opt. 51(19), 4343–4352 (2012).
    [Crossref] [PubMed]
  7. H. Kang, T. Yamaguchi, and H. Yoshikawa, “Accurate phase-added stereogram to improve the coherent stereogram,” Appl. Opt. 47(19), D44–D54 (2008).
    [Crossref] [PubMed]
  8. H. Zhang, Y. Zhao, L. Cao, and G. Jin, “Fully computed holographic stereogram based algorithm for computer-generated holograms with accurate depth cues,” Opt. Express 23(4), 3901–3913 (2015).
    [Crossref] [PubMed]
  9. Y. Kim, E. Stoykova, H. Kang, S. Hong, J. Park, J. Park, and J. Hong, “Seamless full color holographic printing method based on spatial partitioning of SLM,” Opt. Express 23(1), 172–182 (2015).
    [Crossref] [PubMed]
  10. M. Oikawa, T. Shimobaba, T. Yoda, H. Nakayama, A. Shiraki, N. Masuda, and T. Ito, “Time-division color electroholography using one-chip RGB LED and synchronizing controller,” Opt. Express 19(13), 12008–12013 (2011).
    [Crossref] [PubMed]
  11. H. Sasaki, K. Yamamoto, Y. Ichihashi, and T. Senoh, “Image size scalable full-parallax coloured three-dimensional video by electronic holography,” Sci. Rep. 4, 4000 (2014).
    [PubMed]
  12. H. Sasaki, K. Yamamoto, K. Wakunami, Y. Ichihashi, R. Oi, and T. Senoh, “Large size three-dimensional video by electronic holography using multiple spatial light modulators,” Sci. Rep. 4, 6177 (2014).
    [Crossref] [PubMed]
  13. W. Zaperty, M. Kujawinska, T. Kozacki, and B. Wisniowski, “Wide angle, color holographic 3D display with multi-source based holographic content,” Proc. SPIE 9385, 93850E (2015).
    [Crossref]
  14. Y. Takaki, Y. Matsumoto, and T. Nakajima, “Color image generation for screen-scanning holographic display,” Opt. Express 23(21), 26986–26998 (2015).
    [Crossref] [PubMed]
  15. F. Yaraş, H. Kang, and L. Onural, “Real-time phase-only color holographic video display system using LED illumination,” Appl. Opt. 48(34), H48–H53 (2009).
    [Crossref] [PubMed]
  16. H. Nakayama, N. Takada, Y. Ichihashi, S. Awazu, T. Shimobaba, N. Masuda, and T. Ito, “Real-time color electroholography using multiple graphics processing units and multiple high-definition liquid-crystal display panels,” Appl. Opt. 49(31), 5993–5996 (2010).
    [Crossref]
  17. T. Miyaoka, K. Matsushima, and S. Nakahara, “Optimization of design-wavelength for unobtrusive chromatic aberration in high-definition color computer holography,” Proc. SPIE 9386, 93860N (2015).
    [Crossref]
  18. T. Kämpfe, E. B. Kley, A. Tünnermann, and P. Dannberg, “Design and fabrication of stacked, computer generated holograms for multicolor image generation,” Appl. Opt. 46(22), 5482–5488 (2007).
    [Crossref] [PubMed]
  19. T. Ito and K. Okano, “Color electroholography by three colored reference lights simultaneously incident upon one hologram panel,” Opt. Express 12(18), 4320–4325 (2004).
    [Crossref] [PubMed]
  20. G. Xue, J. Liu, X. Li, J. Jia, Z. Zhang, B. Hu, and Y. Wang, “Multiplexing encoding method for full-color dynamic 3D holographic display,” Opt. Express 22(15), 18473–18482 (2014).
    [Crossref] [PubMed]
  21. M. Makowski, M. Sypek, I. Ducin, A. Fajst, A. Siemion, J. Suszek, and A. Kolodziejczyk, “Experimental evaluation of a full-color compact lensless holographic display,” Opt. Express 17(23), 20840–20846 (2009).
    [Crossref] [PubMed]
  22. A. Jesacher, S. Bernet, and M. Ritsch-Marte, “Colour hologram projection with an SLM by exploiting its full phase modulation range,” Opt. Express 22(17), 20530–20541 (2014).
    [Crossref] [PubMed]
  23. Y. Kajiki, M. Okamoto, T. Ando, K. Yamasaki, and E. Shimizu, “Computer-generated color holograms using RGB color filters,” Proc. SPIE 3293, 125–130 (1998).
    [Crossref]
  24. S. Iwami and Y. Sakamoto, “A study of glasses-type color CGH using a color filter considering reduction of blurring,” Proc. SPIE 7233, 723317 (2009).
    [Crossref]
  25. T. Kozacki and M. Chlipala, “Color holographic display with white light LED source and single phase only SLM,” Opt. Express 24(3), 2189–2199 (2016).
    [Crossref] [PubMed]
  26. Y. Tsuchiyama, K. Matsushima, S. Nakahara, and Y. Sakamoto, “Full-color high-definition CGH using color filter and filter design based on simulation,” in Imaging and Applied Optics 2016, OSA Technical Digest (online) (Optical Society of America, 2016), paper DW5I.4.
    [Crossref]
  27. K. Matsushima and T. Shimobaba, “Band-limited angular spectrum method for numerical simulation of free-space propagation in far and near fields,” Opt. Express 17(22), 19662–19673 (2009).
    [Crossref] [PubMed]
  28. R. P. Muffoletto, J. M. Tyler, and J. E. Tohline, “Shifted Fresnel diffraction for computational holography,” Opt. Express 15(9), 5631–5640 (2007).
    [Crossref] [PubMed]
  29. K. Matsushima, “Shifted angular spectrum method for off-axis numerical propagation,” Opt. Express 18(17), 18453–18463 (2010).
    [Crossref] [PubMed]
  30. K. Matsushima, H. Schimmel, and F. Wyrowski, “Fast calculation method for optical diffraction on tilted planes by use of the angular spectrum of plane waves,” J. Opt. Soc. Am. A 20(9), 1755–1762 (2003).
    [Crossref] [PubMed]
  31. K. Matsushima, “Computer-generated holograms for three-dimensional surface objects with shade and texture,” Appl. Opt. 44(22), 4607–4614 (2005).
    [Crossref] [PubMed]

2016 (1)

2015 (5)

2014 (5)

2012 (2)

F. Yang, Y. Murakami, and M. Yamaguchi, “Digital color management in full-color holographic three-dimensional printer,” Appl. Opt. 51(19), 4343–4352 (2012).
[Crossref] [PubMed]

K. Matsushima, H. Nishi, and S. Nakahara, “Simple wave-field rendering for photorealistic reconstruction in polygon-based high-definition computer holography,” J. Electron. Imaging 21(2), 023002 (2012).
[Crossref]

2011 (2)

2010 (2)

2009 (5)

2008 (1)

2007 (2)

2005 (1)

2004 (1)

2003 (1)

1998 (1)

Y. Kajiki, M. Okamoto, T. Ando, K. Yamasaki, and E. Shimizu, “Computer-generated color holograms using RGB color filters,” Proc. SPIE 3293, 125–130 (1998).
[Crossref]

Ando, T.

Y. Kajiki, M. Okamoto, T. Ando, K. Yamasaki, and E. Shimizu, “Computer-generated color holograms using RGB color filters,” Proc. SPIE 3293, 125–130 (1998).
[Crossref]

Arima, Y.

Awazu, S.

Bernet, S.

Cao, L.

Chlipala, M.

Dannberg, P.

Ducin, I.

Fajst, A.

Hong, J.

Hong, S.

Hu, B.

Ichihashi, Y.

H. Sasaki, K. Yamamoto, Y. Ichihashi, and T. Senoh, “Image size scalable full-parallax coloured three-dimensional video by electronic holography,” Sci. Rep. 4, 4000 (2014).
[PubMed]

H. Sasaki, K. Yamamoto, K. Wakunami, Y. Ichihashi, R. Oi, and T. Senoh, “Large size three-dimensional video by electronic holography using multiple spatial light modulators,” Sci. Rep. 4, 6177 (2014).
[Crossref] [PubMed]

H. Nakayama, N. Takada, Y. Ichihashi, S. Awazu, T. Shimobaba, N. Masuda, and T. Ito, “Real-time color electroholography using multiple graphics processing units and multiple high-definition liquid-crystal display panels,” Appl. Opt. 49(31), 5993–5996 (2010).
[Crossref]

Ito, T.

Iwami, S.

S. Iwami and Y. Sakamoto, “A study of glasses-type color CGH using a color filter considering reduction of blurring,” Proc. SPIE 7233, 723317 (2009).
[Crossref]

Jesacher, A.

Jia, J.

Jin, G.

Kajiki, Y.

Y. Kajiki, M. Okamoto, T. Ando, K. Yamasaki, and E. Shimizu, “Computer-generated color holograms using RGB color filters,” Proc. SPIE 3293, 125–130 (1998).
[Crossref]

Kämpfe, T.

Kang, H.

Kim, Y.

Kley, E. B.

Kolodziejczyk, A.

Kozacki, T.

T. Kozacki and M. Chlipala, “Color holographic display with white light LED source and single phase only SLM,” Opt. Express 24(3), 2189–2199 (2016).
[Crossref] [PubMed]

W. Zaperty, M. Kujawinska, T. Kozacki, and B. Wisniowski, “Wide angle, color holographic 3D display with multi-source based holographic content,” Proc. SPIE 9385, 93850E (2015).
[Crossref]

Kujawinska, M.

W. Zaperty, M. Kujawinska, T. Kozacki, and B. Wisniowski, “Wide angle, color holographic 3D display with multi-source based holographic content,” Proc. SPIE 9385, 93850E (2015).
[Crossref]

Li, X.

Liu, J.

Makowski, M.

Masuda, N.

Matsumoto, Y.

Matsushima, K.

T. Miyaoka, K. Matsushima, and S. Nakahara, “Optimization of design-wavelength for unobtrusive chromatic aberration in high-definition color computer holography,” Proc. SPIE 9386, 93860N (2015).
[Crossref]

K. Matsushima, M. Nakamura, and S. Nakahara, “Silhouette method for hidden surface removal in computer holography and its acceleration using the switch-back technique,” Opt. Express 22(20), 24450–24465 (2014).
[Crossref] [PubMed]

K. Matsushima, H. Nishi, and S. Nakahara, “Simple wave-field rendering for photorealistic reconstruction in polygon-based high-definition computer holography,” J. Electron. Imaging 21(2), 023002 (2012).
[Crossref]

K. Matsushima, Y. Arima, and S. Nakahara, “Digitized holography: modern holography for 3D imaging of virtual and real objects,” Appl. Opt. 50(34), H278–H284 (2011).
[Crossref] [PubMed]

K. Matsushima, “Shifted angular spectrum method for off-axis numerical propagation,” Opt. Express 18(17), 18453–18463 (2010).
[Crossref] [PubMed]

K. Matsushima and S. Nakahara, “Extremely high-definition full-parallax computer-generated hologram created by the polygon-based method,” Appl. Opt. 48(34), H54–H63 (2009).
[Crossref] [PubMed]

K. Matsushima and T. Shimobaba, “Band-limited angular spectrum method for numerical simulation of free-space propagation in far and near fields,” Opt. Express 17(22), 19662–19673 (2009).
[Crossref] [PubMed]

K. Matsushima, “Computer-generated holograms for three-dimensional surface objects with shade and texture,” Appl. Opt. 44(22), 4607–4614 (2005).
[Crossref] [PubMed]

K. Matsushima, H. Schimmel, and F. Wyrowski, “Fast calculation method for optical diffraction on tilted planes by use of the angular spectrum of plane waves,” J. Opt. Soc. Am. A 20(9), 1755–1762 (2003).
[Crossref] [PubMed]

K. Matsushima and S. Nakahara, “Stepping closer to the perfect 3D digital image,” SPIE Newsroom (2012).

Miyaoka, T.

T. Miyaoka, K. Matsushima, and S. Nakahara, “Optimization of design-wavelength for unobtrusive chromatic aberration in high-definition color computer holography,” Proc. SPIE 9386, 93860N (2015).
[Crossref]

Muffoletto, R. P.

Murakami, Y.

Nakahara, S.

T. Miyaoka, K. Matsushima, and S. Nakahara, “Optimization of design-wavelength for unobtrusive chromatic aberration in high-definition color computer holography,” Proc. SPIE 9386, 93860N (2015).
[Crossref]

K. Matsushima, M. Nakamura, and S. Nakahara, “Silhouette method for hidden surface removal in computer holography and its acceleration using the switch-back technique,” Opt. Express 22(20), 24450–24465 (2014).
[Crossref] [PubMed]

K. Matsushima, H. Nishi, and S. Nakahara, “Simple wave-field rendering for photorealistic reconstruction in polygon-based high-definition computer holography,” J. Electron. Imaging 21(2), 023002 (2012).
[Crossref]

K. Matsushima, Y. Arima, and S. Nakahara, “Digitized holography: modern holography for 3D imaging of virtual and real objects,” Appl. Opt. 50(34), H278–H284 (2011).
[Crossref] [PubMed]

K. Matsushima and S. Nakahara, “Extremely high-definition full-parallax computer-generated hologram created by the polygon-based method,” Appl. Opt. 48(34), H54–H63 (2009).
[Crossref] [PubMed]

K. Matsushima and S. Nakahara, “Stepping closer to the perfect 3D digital image,” SPIE Newsroom (2012).

Nakajima, T.

Nakamura, M.

Nakayama, H.

Nishi, H.

K. Matsushima, H. Nishi, and S. Nakahara, “Simple wave-field rendering for photorealistic reconstruction in polygon-based high-definition computer holography,” J. Electron. Imaging 21(2), 023002 (2012).
[Crossref]

Oi, R.

H. Sasaki, K. Yamamoto, K. Wakunami, Y. Ichihashi, R. Oi, and T. Senoh, “Large size three-dimensional video by electronic holography using multiple spatial light modulators,” Sci. Rep. 4, 6177 (2014).
[Crossref] [PubMed]

Oikawa, M.

Okamoto, M.

Y. Kajiki, M. Okamoto, T. Ando, K. Yamasaki, and E. Shimizu, “Computer-generated color holograms using RGB color filters,” Proc. SPIE 3293, 125–130 (1998).
[Crossref]

Okano, K.

Onural, L.

Park, J.

Ritsch-Marte, M.

Sakamoto, Y.

S. Iwami and Y. Sakamoto, “A study of glasses-type color CGH using a color filter considering reduction of blurring,” Proc. SPIE 7233, 723317 (2009).
[Crossref]

Sasaki, H.

H. Sasaki, K. Yamamoto, K. Wakunami, Y. Ichihashi, R. Oi, and T. Senoh, “Large size three-dimensional video by electronic holography using multiple spatial light modulators,” Sci. Rep. 4, 6177 (2014).
[Crossref] [PubMed]

H. Sasaki, K. Yamamoto, Y. Ichihashi, and T. Senoh, “Image size scalable full-parallax coloured three-dimensional video by electronic holography,” Sci. Rep. 4, 4000 (2014).
[PubMed]

Schimmel, H.

Senoh, T.

H. Sasaki, K. Yamamoto, Y. Ichihashi, and T. Senoh, “Image size scalable full-parallax coloured three-dimensional video by electronic holography,” Sci. Rep. 4, 4000 (2014).
[PubMed]

H. Sasaki, K. Yamamoto, K. Wakunami, Y. Ichihashi, R. Oi, and T. Senoh, “Large size three-dimensional video by electronic holography using multiple spatial light modulators,” Sci. Rep. 4, 6177 (2014).
[Crossref] [PubMed]

Shimizu, E.

Y. Kajiki, M. Okamoto, T. Ando, K. Yamasaki, and E. Shimizu, “Computer-generated color holograms using RGB color filters,” Proc. SPIE 3293, 125–130 (1998).
[Crossref]

Shimobaba, T.

Shiraki, A.

Siemion, A.

Stoykova, E.

Suszek, J.

Sypek, M.

Takada, N.

Takaki, Y.

Tohline, J. E.

Tünnermann, A.

Tyler, J. M.

Wakunami, K.

H. Sasaki, K. Yamamoto, K. Wakunami, Y. Ichihashi, R. Oi, and T. Senoh, “Large size three-dimensional video by electronic holography using multiple spatial light modulators,” Sci. Rep. 4, 6177 (2014).
[Crossref] [PubMed]

Wang, Y.

Wisniowski, B.

W. Zaperty, M. Kujawinska, T. Kozacki, and B. Wisniowski, “Wide angle, color holographic 3D display with multi-source based holographic content,” Proc. SPIE 9385, 93850E (2015).
[Crossref]

Wyrowski, F.

Xue, G.

Yamaguchi, M.

Yamaguchi, T.

Yamamoto, K.

H. Sasaki, K. Yamamoto, K. Wakunami, Y. Ichihashi, R. Oi, and T. Senoh, “Large size three-dimensional video by electronic holography using multiple spatial light modulators,” Sci. Rep. 4, 6177 (2014).
[Crossref] [PubMed]

H. Sasaki, K. Yamamoto, Y. Ichihashi, and T. Senoh, “Image size scalable full-parallax coloured three-dimensional video by electronic holography,” Sci. Rep. 4, 4000 (2014).
[PubMed]

Yamasaki, K.

Y. Kajiki, M. Okamoto, T. Ando, K. Yamasaki, and E. Shimizu, “Computer-generated color holograms using RGB color filters,” Proc. SPIE 3293, 125–130 (1998).
[Crossref]

Yang, F.

Yaras, F.

Yoda, T.

Yoshikawa, H.

Zaperty, W.

W. Zaperty, M. Kujawinska, T. Kozacki, and B. Wisniowski, “Wide angle, color holographic 3D display with multi-source based holographic content,” Proc. SPIE 9385, 93850E (2015).
[Crossref]

Zhang, H.

Zhang, Z.

Zhao, Y.

Appl. Opt. (8)

K. Matsushima and S. Nakahara, “Extremely high-definition full-parallax computer-generated hologram created by the polygon-based method,” Appl. Opt. 48(34), H54–H63 (2009).
[Crossref] [PubMed]

K. Matsushima, Y. Arima, and S. Nakahara, “Digitized holography: modern holography for 3D imaging of virtual and real objects,” Appl. Opt. 50(34), H278–H284 (2011).
[Crossref] [PubMed]

F. Yang, Y. Murakami, and M. Yamaguchi, “Digital color management in full-color holographic three-dimensional printer,” Appl. Opt. 51(19), 4343–4352 (2012).
[Crossref] [PubMed]

H. Kang, T. Yamaguchi, and H. Yoshikawa, “Accurate phase-added stereogram to improve the coherent stereogram,” Appl. Opt. 47(19), D44–D54 (2008).
[Crossref] [PubMed]

F. Yaraş, H. Kang, and L. Onural, “Real-time phase-only color holographic video display system using LED illumination,” Appl. Opt. 48(34), H48–H53 (2009).
[Crossref] [PubMed]

H. Nakayama, N. Takada, Y. Ichihashi, S. Awazu, T. Shimobaba, N. Masuda, and T. Ito, “Real-time color electroholography using multiple graphics processing units and multiple high-definition liquid-crystal display panels,” Appl. Opt. 49(31), 5993–5996 (2010).
[Crossref]

T. Kämpfe, E. B. Kley, A. Tünnermann, and P. Dannberg, “Design and fabrication of stacked, computer generated holograms for multicolor image generation,” Appl. Opt. 46(22), 5482–5488 (2007).
[Crossref] [PubMed]

K. Matsushima, “Computer-generated holograms for three-dimensional surface objects with shade and texture,” Appl. Opt. 44(22), 4607–4614 (2005).
[Crossref] [PubMed]

J. Electron. Imaging (1)

K. Matsushima, H. Nishi, and S. Nakahara, “Simple wave-field rendering for photorealistic reconstruction in polygon-based high-definition computer holography,” J. Electron. Imaging 21(2), 023002 (2012).
[Crossref]

J. Opt. Soc. Am. A (1)

Opt. Express (13)

Y. Takaki, Y. Matsumoto, and T. Nakajima, “Color image generation for screen-scanning holographic display,” Opt. Express 23(21), 26986–26998 (2015).
[Crossref] [PubMed]

T. Kozacki and M. Chlipala, “Color holographic display with white light LED source and single phase only SLM,” Opt. Express 24(3), 2189–2199 (2016).
[Crossref] [PubMed]

K. Matsushima and T. Shimobaba, “Band-limited angular spectrum method for numerical simulation of free-space propagation in far and near fields,” Opt. Express 17(22), 19662–19673 (2009).
[Crossref] [PubMed]

R. P. Muffoletto, J. M. Tyler, and J. E. Tohline, “Shifted Fresnel diffraction for computational holography,” Opt. Express 15(9), 5631–5640 (2007).
[Crossref] [PubMed]

K. Matsushima, “Shifted angular spectrum method for off-axis numerical propagation,” Opt. Express 18(17), 18453–18463 (2010).
[Crossref] [PubMed]

H. Zhang, Y. Zhao, L. Cao, and G. Jin, “Fully computed holographic stereogram based algorithm for computer-generated holograms with accurate depth cues,” Opt. Express 23(4), 3901–3913 (2015).
[Crossref] [PubMed]

Y. Kim, E. Stoykova, H. Kang, S. Hong, J. Park, J. Park, and J. Hong, “Seamless full color holographic printing method based on spatial partitioning of SLM,” Opt. Express 23(1), 172–182 (2015).
[Crossref] [PubMed]

M. Oikawa, T. Shimobaba, T. Yoda, H. Nakayama, A. Shiraki, N. Masuda, and T. Ito, “Time-division color electroholography using one-chip RGB LED and synchronizing controller,” Opt. Express 19(13), 12008–12013 (2011).
[Crossref] [PubMed]

T. Ito and K. Okano, “Color electroholography by three colored reference lights simultaneously incident upon one hologram panel,” Opt. Express 12(18), 4320–4325 (2004).
[Crossref] [PubMed]

G. Xue, J. Liu, X. Li, J. Jia, Z. Zhang, B. Hu, and Y. Wang, “Multiplexing encoding method for full-color dynamic 3D holographic display,” Opt. Express 22(15), 18473–18482 (2014).
[Crossref] [PubMed]

M. Makowski, M. Sypek, I. Ducin, A. Fajst, A. Siemion, J. Suszek, and A. Kolodziejczyk, “Experimental evaluation of a full-color compact lensless holographic display,” Opt. Express 17(23), 20840–20846 (2009).
[Crossref] [PubMed]

A. Jesacher, S. Bernet, and M. Ritsch-Marte, “Colour hologram projection with an SLM by exploiting its full phase modulation range,” Opt. Express 22(17), 20530–20541 (2014).
[Crossref] [PubMed]

K. Matsushima, M. Nakamura, and S. Nakahara, “Silhouette method for hidden surface removal in computer holography and its acceleration using the switch-back technique,” Opt. Express 22(20), 24450–24465 (2014).
[Crossref] [PubMed]

Proc. SPIE (4)

W. Zaperty, M. Kujawinska, T. Kozacki, and B. Wisniowski, “Wide angle, color holographic 3D display with multi-source based holographic content,” Proc. SPIE 9385, 93850E (2015).
[Crossref]

T. Miyaoka, K. Matsushima, and S. Nakahara, “Optimization of design-wavelength for unobtrusive chromatic aberration in high-definition color computer holography,” Proc. SPIE 9386, 93860N (2015).
[Crossref]

Y. Kajiki, M. Okamoto, T. Ando, K. Yamasaki, and E. Shimizu, “Computer-generated color holograms using RGB color filters,” Proc. SPIE 3293, 125–130 (1998).
[Crossref]

S. Iwami and Y. Sakamoto, “A study of glasses-type color CGH using a color filter considering reduction of blurring,” Proc. SPIE 7233, 723317 (2009).
[Crossref]

Sci. Rep. (2)

H. Sasaki, K. Yamamoto, Y. Ichihashi, and T. Senoh, “Image size scalable full-parallax coloured three-dimensional video by electronic holography,” Sci. Rep. 4, 4000 (2014).
[PubMed]

H. Sasaki, K. Yamamoto, K. Wakunami, Y. Ichihashi, R. Oi, and T. Senoh, “Large size three-dimensional video by electronic holography using multiple spatial light modulators,” Sci. Rep. 4, 6177 (2014).
[Crossref] [PubMed]

Other (2)

K. Matsushima and S. Nakahara, “Stepping closer to the perfect 3D digital image,” SPIE Newsroom (2012).

Y. Tsuchiyama, K. Matsushima, S. Nakahara, and Y. Sakamoto, “Full-color high-definition CGH using color filter and filter design based on simulation,” in Imaging and Applied Optics 2016, OSA Technical Digest (online) (Optical Society of America, 2016), paper DW5I.4.
[Crossref]

Supplementary Material (2)

NameDescription
» Visualization 1: MP4 (11118 KB)      Movie of optical reconstruction of CGH "Color Cube"
» Visualization 2: MP4 (12742 KB)      Movie of optical reconstruction of CGH "Casino Chips"

Cited By

OSA participates in Crossref's Cited-By Linking service. Citing articles from OSA journals and other participating publishers are listed here.

Alert me when this article is cited.


Figures (15)

Fig. 1
Fig. 1

Optical reconstruction example of a high-definition CGH made of a photomask [4].

Fig. 2
Fig. 2

Principle of full-color reconstruction of high-definition CGHs using RGB color filters.

Fig. 3
Fig. 3

Filtering of illumination light for each fringe block corresponding to its color.

Fig. 4
Fig. 4

Layered structure of a full-color high-definition CGH for (a) transmission and (b) reflection illumination.

Fig. 5
Fig. 5

Spectral examples of (a) measured LED outputs and (b) effective illumination estimated in single- and multi-chip LEDs. Note that the peak values of the outputs of the multi-chip LED and the effective illumination are normalized to unity.

Fig. 6
Fig. 6

Simulation model of a reflection-type color CGH with RGB color filters.

Fig. 7
Fig. 7

Procedure for producing numerically-reconstructed full-color images.

Fig. 8
Fig. 8

Examples of simulated reconstruction of a test CGH composed of 32K × 32K pixels. The guard gap width is (a) 10 μm, (b) 20 μm (adopted), (c) 40 μm, and (d) 60 μm. The stripe width is 80 μm.

Fig. 9
Fig. 9

Spectra of (a) transmittance of the designed RGB color filters and (b) the effective illuminations estimated from the spectra in (a).

Fig. 10
Fig. 10

Examples of spectra of RGB color filters and the effective illuminations estimated by the corresponding filter spectra. These are not used in actual full-color high-definition CGHs.

Fig. 11
Fig. 11

Three-dimensional scene of the full-color CGH called “Color Cube.”

Fig. 12
Fig. 12

(a) Simulated and (b) optical reconstruction of the full-color high-definition CGH “Color Cube” with the horizontally-striped color filters. (c) Another example of optical reconstruction of the same CGH. The photograph is taken from a different angle.

Fig. 13
Fig. 13

Optical reconstruction of the full-color CGH “Color Cube” with the vertically-striped color filters. Pictures are taken from (a) a distant view and (b)–(d) close-up views from different angles (see Visualization 1).

Fig. 14
Fig. 14

Setup for optical reconstruction of the full-color high-definition CGHs.

Fig. 15
Fig. 15

Optical reconstruction images of the full-color CGH “Casino Chips” at (a) close-up and (b) distant views (see Visualization 2).

Tables (2)

Tables Icon

Table 1 Parameters used for creating the full-color CGHs.

Tables Icon

Table 2 Parameters used for simulated full-color reconstruction.

Equations (7)

Equations on this page are rendered with MathJax. Learn more.

I C (x,y)=Bin{ Re[ O R * (x,y; λ C ) ] },
I(x,y)= C=R,G,B Bl k C { I C (x,y) } ,
u out (x,y;λ)=[ I(x,y) r Cr +{ 1I(x,y) } r glass ]× u in (x,y;λ),
u in (x,y;λ)=Pro p d { C=R,G,B Bl k C { L(x,y;λ) }× t C (λ) },
U(x,y;λ)= C=R,G,B Bl k C { Pro p +d { u out (x,y;λ) } }× t C (λ) +L(x,y;λ)× r CF ,
P( x , y ;λ)=Pro p off { U(x,y;λ) },
I SCR ( x , y ;λ)= | Pro p +s { Rot{ P( x , y ;λ)) } f lens ( x , y ) } | 2 ,

Metrics