Abstract

This work presents color holographic display, which is based on a single phase only spatial light modulator (SLM). In the display entire area of the SLM is illuminated by an on-axis white light beam generated by a single large LED. The holographic display fully utilizes SLM bandwidth and has capability of full-color, full frame rate imaging of outstanding quality. This is achieved through: (i) optimal use of the source coherence volume, (ii) application of the single white light LED source, (iii) a development of a novel concept of color multiplexing technique with color filter mask in Fourier plane of the SLM, (iv) and a complex coding with improved diffraction efficiency. Within experimental part of the paper we show single color, full-color holographic 2D and 3D images generated for reconstruction depth exceeding 10 cm.

© 2016 Optical Society of America

Full Article  |  PDF Article
OSA Recommended Articles
Single SLM full-color holographic 3-D display based on sampling and selective frequency-filtering methods

Shu-Feng Lin and Eun-Soo Kim
Opt. Express 25(10) 11389-11404 (2017)

Full-color holographic display with increased-viewing-angle [Invited]

Zhenxiang Zeng, Huadong Zheng, Yingjie Yu, Anand K. Asundi, and Sergiy Valyukh
Appl. Opt. 56(13) F112-F120 (2017)

Real-time phase-only color holographic video display system using LED illumination

Fahri Yaraş, Hoonjong Kang, and Levent Onural
Appl. Opt. 48(34) H48-H53 (2009)

References

  • View by:
  • |
  • |
  • |

  1. G. Xue, J. Liu, X. Li, J. Jia, Z. Zhang, B. Hu, and Y. Wang, “Multiplexing encoding method for full-color dynamic 3D holographic display,” Opt. Express 22(15), 18473–18482 (2014).
    [Crossref] [PubMed]
  2. H. Sasaki, K. Yamamoto, Y. Ichihashi, and T. Senoh, “Image size scalable full-parallax coloured three-dimensional video by electronic holography,” Sci. Rep. 4, 4000 (2014).
    [PubMed]
  3. K. Hong, J. Yeom, C. Jang, J. Hong, and B. Lee, “Full-color lens-array holographic optical element for three-dimensional optical see-through augmented reality,” Opt. Lett. 39(1), 127–130 (2014).
    [Crossref] [PubMed]
  4. W. Harm, A. Jesacher, G. Thalhammer, S. Bernet, and M. Ritsch-Marte, “How to use a phase-only spatial light modulator as a color display,” Opt. Lett. 40(4), 581–584 (2015).
    [Crossref] [PubMed]
  5. T. Kozacki, M. Kujawińska, G. Finke, W. Zaperty, and B. M. Hennelly, “Holographic capture and display systems in circular configurations,” J. Display Technol. 8(4), 225–232 (2012).
    [Crossref]
  6. T. Inoue and Y. Takaki, “Table screen 360-degree holographic display using circular viewing-zone scanning,” Opt. Express 23(5), 6533–6542 (2015).
    [Crossref] [PubMed]
  7. J.-Y. Son, J.-W. Kim, K.-A. Moon, J.-H. Kim, and O. Chernyshov, “Viewing conditions of multiplexed holographic images,” Opt. Lasers Eng. 71, 66–73 (2015).
    [Crossref]
  8. T. Kozacki, G. Finke, P. Garbat, W. Zaperty, and M. Kujawińska, “Wide angle holographic display system with spatiotemporal multiplexing,” Opt. Express 20(25), 27473–27481 (2012).
    [Crossref] [PubMed]
  9. J.-S. Chen and D. P. Chu, “Improved layer-based method for rapid hologram generation and real-time interactive holographic display applications,” Opt. Express 23(14), 18143–18155 (2015).
    [Crossref] [PubMed]
  10. A. Symeonidou, D. Blinder, A. Munteanu, and P. Schelkens, “Computer-generated holograms by multiple wavefront recording plane method with occlusion culling,” Opt. Express 23(17), 22149–22161 (2015).
    [Crossref] [PubMed]
  11. H. Takagi, K. Nakamura, T. Goto, P. B. Lim, and M. Inoue, “Magneto-optic spatial light modulator with submicron-size magnetic pixels for wide-viewing-angle holographic displays,” Opt. Lett. 39(11), 3344–3347 (2014).
    [Crossref] [PubMed]
  12. H. Choo, M. Park, H. Kim, C. Bae, B. G. Chae, H. Kim, K. Moon, and J. Kim, “Real-time pupil tracking backlight system for holographic 3D display,” Chin. Opt. Lett. 12, 10–13 (2014).
  13. T. Leportier, M. C. Park, Y. S. Kim, and T. Kim, “Converting optical scanning holograms of real objects to binary Fourier holograms using an iterative direct binary search algorithm,” Opt. Express 23(3), 3403–3411 (2015).
    [Crossref] [PubMed]
  14. P. L. Makowski, T. Kozacki, P. Zdankowski, and W. Zaperty, “Synthetic aperture Fourier holography for wide- angle holographic display of real scenes,” Appl. Opt. 54(12), 3658–3665 (2015).
    [Crossref]
  15. A. Pelagotti, M. Paturzo, M. Locatelli, A. Geltrude, R. Meucci, A. Finizio, and P. Ferraro, “An automatic method for assembling a large synthetic aperture digital hologram,” Opt. Express 20(5), 4830–4839 (2012).
    [Crossref] [PubMed]
  16. P. Memmolo, M. Leo, C. Distante, M. Paturzo, and P. Ferraro, “Coding color three-dimensional scenes and joining different objects by adaptive transformations in digital holography,” J. Display Technol. 11(10), 854–860 (2015).
    [Crossref]
  17. M. Paturzo, P. Memmolo, A. Finizio, R. Näsänen, T. J. Naughton, and P. Ferraro, “Synthesis and display of dynamic holographic 3D scenes with real-world objects,” Opt. Express 18(9), 8806–8815 (2010).
    [Crossref] [PubMed]
  18. X. Li, J. Liu, J. Jia, Y. Pan, and Y. Wang, “3D dynamic holographic display by modulating complex amplitude experimentally,” Opt. Express 21(18), 20577–20587 (2013).
    [Crossref] [PubMed]
  19. S. Reichelt, R. Häussler, G. Fütterer, N. Leister, H. Kato, N. Usukura, and Y. Kanbayashi, “Full-range, complex spatial light modulator for real-time holography,” Opt. Lett. 37(11), 1955–1957 (2012).
    [Crossref] [PubMed]
  20. M. Kujawinska, T. Kozacki, C. Falldorf, T. Meeser, B. M. Hennelly, P. Garbat, W. Zaperty, M. Niemelä, G. Finke, M. Kowiel, and T. Naughton, “Multiwavefront digital holographic television,” Opt. Express 22(3), 2324–2336 (2014).
    [Crossref] [PubMed]
  21. M. Makowski, I. Ducin, K. Kakarenko, J. Suszek, M. Sypek, and A. Kolodziejczyk, “Simple holographic projection in color,” Opt. Express 20(22), 25130–25136 (2012).
    [Crossref] [PubMed]
  22. T. Shimobaba, M. Makowski, T. Kakue, M. Oikawa, N. Okada, Y. Endo, R. Hirayama, and T. Ito, “Lensless zoomable holographic projection using scaled Fresnel diffraction,” Opt. Express 21(21), 25285–25290 (2013).
    [Crossref] [PubMed]
  23. Y. Kim, E. Stoykova, H. Kang, S. Hong, J. Park, J. Park, and J. Hong, “Seamless full color holographic printing method based on spatial partitioning of SLM,” Opt. Express 23(1), 172–182 (2015).
    [Crossref] [PubMed]
  24. F. Yaraş, H. Kang, and L. Onural, “Real-time phase-only color holographic video display system using LED illumination,” Appl. Opt. 48(34), H48–H53 (2009).
    [Crossref] [PubMed]
  25. K. Takano and K. Sato, “Color electro-holographic display using a single white light source and a focal adjustment method,” Opt. Eng. 41(10), 2427 (2002).
    [Crossref]
  26. A. Shiraki, N. Takada, M. Niwa, Y. Ichihashi, T. Shimobaba, N. Masuda, and T. Ito, “Simplified electroholographic color reconstruction system using graphics processing unit and liquid crystal display projector,” Opt. Express 17(18), 16038–16045 (2009).
    [Crossref] [PubMed]
  27. M. Oikawa, T. Shimobaba, T. Yoda, H. Nakayama, A. Shiraki, N. Masuda, and T. Ito, “Time-division color electroholography using one-chip RGB LED and synchronizing controller,” Opt. Express 19(13), 12008–12013 (2011).
    [Crossref] [PubMed]
  28. E. Moon, M. Kim, J. Roh, H. Kim, and J. Hahn, “Holographic head-mounted display with RGB light emitting diode light source,” Opt. Express 22(6), 6526–6534 (2014).
    [Crossref] [PubMed]
  29. T. Ito and K. Okano, “Color electroholography by three colored reference lights simultaneously incident upon one hologram panel,” Opt. Express 12(18), 4320–4325 (2004).
    [Crossref] [PubMed]
  30. A. Jesacher, S. Bernet, and M. Ritsch-Marte, “Colour hologram projection with an SLM by exploiting its full phase modulation range,” Opt. Express 22(17), 20530–20541 (2014).
    [Crossref] [PubMed]
  31. O. Kopylov, A. Bañas, M. Villangca, D. Palima, and J. Glückstad, “GPC light shaping a supercontinuum source,” Opt. Express 23(3), 1894–1905 (2015).
    [Crossref] [PubMed]
  32. T. Kozacki and R. Jóźwicki, “Near field hologram registration with partially coherent illumination,” Opt. Commun. 237(4-6), 235–242 (2004).
    [Crossref]
  33. U. Gopinathan, G. Pedrini, and W. Osten, “Coherence effects in digital in-line holographic microscopy,” J. Opt. Soc. Am. A 25(10), 2459–2466 (2008).
    [Crossref] [PubMed]
  34. M. Chlipała and T. Kozacki, “Resolution limits in holographic display with LED illumination,” Proc. SPIE 9527, 95270A (2015).
    [Crossref]
  35. H. Kang, T. Yamaguchi, and H. Yoshikawa, “Accurate phase-added stereogram to improve the coherent stereogram,” Appl. Opt. 47(19), D44–D54 (2008).
    [Crossref] [PubMed]

2015 (11)

W. Harm, A. Jesacher, G. Thalhammer, S. Bernet, and M. Ritsch-Marte, “How to use a phase-only spatial light modulator as a color display,” Opt. Lett. 40(4), 581–584 (2015).
[Crossref] [PubMed]

J.-S. Chen and D. P. Chu, “Improved layer-based method for rapid hologram generation and real-time interactive holographic display applications,” Opt. Express 23(14), 18143–18155 (2015).
[Crossref] [PubMed]

A. Symeonidou, D. Blinder, A. Munteanu, and P. Schelkens, “Computer-generated holograms by multiple wavefront recording plane method with occlusion culling,” Opt. Express 23(17), 22149–22161 (2015).
[Crossref] [PubMed]

T. Inoue and Y. Takaki, “Table screen 360-degree holographic display using circular viewing-zone scanning,” Opt. Express 23(5), 6533–6542 (2015).
[Crossref] [PubMed]

J.-Y. Son, J.-W. Kim, K.-A. Moon, J.-H. Kim, and O. Chernyshov, “Viewing conditions of multiplexed holographic images,” Opt. Lasers Eng. 71, 66–73 (2015).
[Crossref]

T. Leportier, M. C. Park, Y. S. Kim, and T. Kim, “Converting optical scanning holograms of real objects to binary Fourier holograms using an iterative direct binary search algorithm,” Opt. Express 23(3), 3403–3411 (2015).
[Crossref] [PubMed]

P. L. Makowski, T. Kozacki, P. Zdankowski, and W. Zaperty, “Synthetic aperture Fourier holography for wide- angle holographic display of real scenes,” Appl. Opt. 54(12), 3658–3665 (2015).
[Crossref]

P. Memmolo, M. Leo, C. Distante, M. Paturzo, and P. Ferraro, “Coding color three-dimensional scenes and joining different objects by adaptive transformations in digital holography,” J. Display Technol. 11(10), 854–860 (2015).
[Crossref]

Y. Kim, E. Stoykova, H. Kang, S. Hong, J. Park, J. Park, and J. Hong, “Seamless full color holographic printing method based on spatial partitioning of SLM,” Opt. Express 23(1), 172–182 (2015).
[Crossref] [PubMed]

O. Kopylov, A. Bañas, M. Villangca, D. Palima, and J. Glückstad, “GPC light shaping a supercontinuum source,” Opt. Express 23(3), 1894–1905 (2015).
[Crossref] [PubMed]

M. Chlipała and T. Kozacki, “Resolution limits in holographic display with LED illumination,” Proc. SPIE 9527, 95270A (2015).
[Crossref]

2014 (8)

A. Jesacher, S. Bernet, and M. Ritsch-Marte, “Colour hologram projection with an SLM by exploiting its full phase modulation range,” Opt. Express 22(17), 20530–20541 (2014).
[Crossref] [PubMed]

M. Kujawinska, T. Kozacki, C. Falldorf, T. Meeser, B. M. Hennelly, P. Garbat, W. Zaperty, M. Niemelä, G. Finke, M. Kowiel, and T. Naughton, “Multiwavefront digital holographic television,” Opt. Express 22(3), 2324–2336 (2014).
[Crossref] [PubMed]

E. Moon, M. Kim, J. Roh, H. Kim, and J. Hahn, “Holographic head-mounted display with RGB light emitting diode light source,” Opt. Express 22(6), 6526–6534 (2014).
[Crossref] [PubMed]

H. Takagi, K. Nakamura, T. Goto, P. B. Lim, and M. Inoue, “Magneto-optic spatial light modulator with submicron-size magnetic pixels for wide-viewing-angle holographic displays,” Opt. Lett. 39(11), 3344–3347 (2014).
[Crossref] [PubMed]

H. Choo, M. Park, H. Kim, C. Bae, B. G. Chae, H. Kim, K. Moon, and J. Kim, “Real-time pupil tracking backlight system for holographic 3D display,” Chin. Opt. Lett. 12, 10–13 (2014).

G. Xue, J. Liu, X. Li, J. Jia, Z. Zhang, B. Hu, and Y. Wang, “Multiplexing encoding method for full-color dynamic 3D holographic display,” Opt. Express 22(15), 18473–18482 (2014).
[Crossref] [PubMed]

H. Sasaki, K. Yamamoto, Y. Ichihashi, and T. Senoh, “Image size scalable full-parallax coloured three-dimensional video by electronic holography,” Sci. Rep. 4, 4000 (2014).
[PubMed]

K. Hong, J. Yeom, C. Jang, J. Hong, and B. Lee, “Full-color lens-array holographic optical element for three-dimensional optical see-through augmented reality,” Opt. Lett. 39(1), 127–130 (2014).
[Crossref] [PubMed]

2013 (2)

2012 (5)

2011 (1)

2010 (1)

2009 (2)

2008 (2)

2004 (2)

T. Kozacki and R. Jóźwicki, “Near field hologram registration with partially coherent illumination,” Opt. Commun. 237(4-6), 235–242 (2004).
[Crossref]

T. Ito and K. Okano, “Color electroholography by three colored reference lights simultaneously incident upon one hologram panel,” Opt. Express 12(18), 4320–4325 (2004).
[Crossref] [PubMed]

2002 (1)

K. Takano and K. Sato, “Color electro-holographic display using a single white light source and a focal adjustment method,” Opt. Eng. 41(10), 2427 (2002).
[Crossref]

Bae, C.

H. Choo, M. Park, H. Kim, C. Bae, B. G. Chae, H. Kim, K. Moon, and J. Kim, “Real-time pupil tracking backlight system for holographic 3D display,” Chin. Opt. Lett. 12, 10–13 (2014).

Bañas, A.

Bernet, S.

Blinder, D.

Chae, B. G.

H. Choo, M. Park, H. Kim, C. Bae, B. G. Chae, H. Kim, K. Moon, and J. Kim, “Real-time pupil tracking backlight system for holographic 3D display,” Chin. Opt. Lett. 12, 10–13 (2014).

Chen, J.-S.

Chernyshov, O.

J.-Y. Son, J.-W. Kim, K.-A. Moon, J.-H. Kim, and O. Chernyshov, “Viewing conditions of multiplexed holographic images,” Opt. Lasers Eng. 71, 66–73 (2015).
[Crossref]

Chlipala, M.

M. Chlipała and T. Kozacki, “Resolution limits in holographic display with LED illumination,” Proc. SPIE 9527, 95270A (2015).
[Crossref]

Choo, H.

H. Choo, M. Park, H. Kim, C. Bae, B. G. Chae, H. Kim, K. Moon, and J. Kim, “Real-time pupil tracking backlight system for holographic 3D display,” Chin. Opt. Lett. 12, 10–13 (2014).

Chu, D. P.

Distante, C.

Ducin, I.

Endo, Y.

Falldorf, C.

Ferraro, P.

Finizio, A.

Finke, G.

Fütterer, G.

Garbat, P.

Geltrude, A.

Glückstad, J.

Gopinathan, U.

Goto, T.

Hahn, J.

Harm, W.

Häussler, R.

Hennelly, B. M.

Hirayama, R.

Hong, J.

Hong, K.

Hong, S.

Hu, B.

Ichihashi, Y.

Inoue, M.

Inoue, T.

Ito, T.

Jang, C.

Jesacher, A.

Jia, J.

Józwicki, R.

T. Kozacki and R. Jóźwicki, “Near field hologram registration with partially coherent illumination,” Opt. Commun. 237(4-6), 235–242 (2004).
[Crossref]

Kakarenko, K.

Kakue, T.

Kanbayashi, Y.

Kang, H.

Kato, H.

Kim, H.

H. Choo, M. Park, H. Kim, C. Bae, B. G. Chae, H. Kim, K. Moon, and J. Kim, “Real-time pupil tracking backlight system for holographic 3D display,” Chin. Opt. Lett. 12, 10–13 (2014).

H. Choo, M. Park, H. Kim, C. Bae, B. G. Chae, H. Kim, K. Moon, and J. Kim, “Real-time pupil tracking backlight system for holographic 3D display,” Chin. Opt. Lett. 12, 10–13 (2014).

E. Moon, M. Kim, J. Roh, H. Kim, and J. Hahn, “Holographic head-mounted display with RGB light emitting diode light source,” Opt. Express 22(6), 6526–6534 (2014).
[Crossref] [PubMed]

Kim, J.

H. Choo, M. Park, H. Kim, C. Bae, B. G. Chae, H. Kim, K. Moon, and J. Kim, “Real-time pupil tracking backlight system for holographic 3D display,” Chin. Opt. Lett. 12, 10–13 (2014).

Kim, J.-H.

J.-Y. Son, J.-W. Kim, K.-A. Moon, J.-H. Kim, and O. Chernyshov, “Viewing conditions of multiplexed holographic images,” Opt. Lasers Eng. 71, 66–73 (2015).
[Crossref]

Kim, J.-W.

J.-Y. Son, J.-W. Kim, K.-A. Moon, J.-H. Kim, and O. Chernyshov, “Viewing conditions of multiplexed holographic images,” Opt. Lasers Eng. 71, 66–73 (2015).
[Crossref]

Kim, M.

Kim, T.

Kim, Y.

Kim, Y. S.

Kolodziejczyk, A.

Kopylov, O.

Kowiel, M.

Kozacki, T.

Kujawinska, M.

Lee, B.

Leister, N.

Leo, M.

Leportier, T.

Li, X.

Lim, P. B.

Liu, J.

Locatelli, M.

Makowski, M.

Makowski, P. L.

Masuda, N.

Meeser, T.

Memmolo, P.

Meucci, R.

Moon, E.

Moon, K.

H. Choo, M. Park, H. Kim, C. Bae, B. G. Chae, H. Kim, K. Moon, and J. Kim, “Real-time pupil tracking backlight system for holographic 3D display,” Chin. Opt. Lett. 12, 10–13 (2014).

Moon, K.-A.

J.-Y. Son, J.-W. Kim, K.-A. Moon, J.-H. Kim, and O. Chernyshov, “Viewing conditions of multiplexed holographic images,” Opt. Lasers Eng. 71, 66–73 (2015).
[Crossref]

Munteanu, A.

Nakamura, K.

Nakayama, H.

Näsänen, R.

Naughton, T.

Naughton, T. J.

Niemelä, M.

Niwa, M.

Oikawa, M.

Okada, N.

Okano, K.

Onural, L.

Osten, W.

Palima, D.

Pan, Y.

Park, J.

Park, M.

H. Choo, M. Park, H. Kim, C. Bae, B. G. Chae, H. Kim, K. Moon, and J. Kim, “Real-time pupil tracking backlight system for holographic 3D display,” Chin. Opt. Lett. 12, 10–13 (2014).

Park, M. C.

Paturzo, M.

Pedrini, G.

Pelagotti, A.

Reichelt, S.

Ritsch-Marte, M.

Roh, J.

Sasaki, H.

H. Sasaki, K. Yamamoto, Y. Ichihashi, and T. Senoh, “Image size scalable full-parallax coloured three-dimensional video by electronic holography,” Sci. Rep. 4, 4000 (2014).
[PubMed]

Sato, K.

K. Takano and K. Sato, “Color electro-holographic display using a single white light source and a focal adjustment method,” Opt. Eng. 41(10), 2427 (2002).
[Crossref]

Schelkens, P.

Senoh, T.

H. Sasaki, K. Yamamoto, Y. Ichihashi, and T. Senoh, “Image size scalable full-parallax coloured three-dimensional video by electronic holography,” Sci. Rep. 4, 4000 (2014).
[PubMed]

Shimobaba, T.

Shiraki, A.

Son, J.-Y.

J.-Y. Son, J.-W. Kim, K.-A. Moon, J.-H. Kim, and O. Chernyshov, “Viewing conditions of multiplexed holographic images,” Opt. Lasers Eng. 71, 66–73 (2015).
[Crossref]

Stoykova, E.

Suszek, J.

Symeonidou, A.

Sypek, M.

Takada, N.

Takagi, H.

Takaki, Y.

Takano, K.

K. Takano and K. Sato, “Color electro-holographic display using a single white light source and a focal adjustment method,” Opt. Eng. 41(10), 2427 (2002).
[Crossref]

Thalhammer, G.

Usukura, N.

Villangca, M.

Wang, Y.

Xue, G.

Yamaguchi, T.

Yamamoto, K.

H. Sasaki, K. Yamamoto, Y. Ichihashi, and T. Senoh, “Image size scalable full-parallax coloured three-dimensional video by electronic holography,” Sci. Rep. 4, 4000 (2014).
[PubMed]

Yaras, F.

Yeom, J.

Yoda, T.

Yoshikawa, H.

Zaperty, W.

Zdankowski, P.

Zhang, Z.

Appl. Opt. (3)

Chin. Opt. Lett. (1)

H. Choo, M. Park, H. Kim, C. Bae, B. G. Chae, H. Kim, K. Moon, and J. Kim, “Real-time pupil tracking backlight system for holographic 3D display,” Chin. Opt. Lett. 12, 10–13 (2014).

J. Display Technol. (2)

J. Opt. Soc. Am. A (1)

Opt. Commun. (1)

T. Kozacki and R. Jóźwicki, “Near field hologram registration with partially coherent illumination,” Opt. Commun. 237(4-6), 235–242 (2004).
[Crossref]

Opt. Eng. (1)

K. Takano and K. Sato, “Color electro-holographic display using a single white light source and a focal adjustment method,” Opt. Eng. 41(10), 2427 (2002).
[Crossref]

Opt. Express (19)

A. Shiraki, N. Takada, M. Niwa, Y. Ichihashi, T. Shimobaba, N. Masuda, and T. Ito, “Simplified electroholographic color reconstruction system using graphics processing unit and liquid crystal display projector,” Opt. Express 17(18), 16038–16045 (2009).
[Crossref] [PubMed]

M. Makowski, I. Ducin, K. Kakarenko, J. Suszek, M. Sypek, and A. Kolodziejczyk, “Simple holographic projection in color,” Opt. Express 20(22), 25130–25136 (2012).
[Crossref] [PubMed]

T. Kozacki, G. Finke, P. Garbat, W. Zaperty, and M. Kujawińska, “Wide angle holographic display system with spatiotemporal multiplexing,” Opt. Express 20(25), 27473–27481 (2012).
[Crossref] [PubMed]

X. Li, J. Liu, J. Jia, Y. Pan, and Y. Wang, “3D dynamic holographic display by modulating complex amplitude experimentally,” Opt. Express 21(18), 20577–20587 (2013).
[Crossref] [PubMed]

T. Shimobaba, M. Makowski, T. Kakue, M. Oikawa, N. Okada, Y. Endo, R. Hirayama, and T. Ito, “Lensless zoomable holographic projection using scaled Fresnel diffraction,” Opt. Express 21(21), 25285–25290 (2013).
[Crossref] [PubMed]

M. Paturzo, P. Memmolo, A. Finizio, R. Näsänen, T. J. Naughton, and P. Ferraro, “Synthesis and display of dynamic holographic 3D scenes with real-world objects,” Opt. Express 18(9), 8806–8815 (2010).
[Crossref] [PubMed]

M. Oikawa, T. Shimobaba, T. Yoda, H. Nakayama, A. Shiraki, N. Masuda, and T. Ito, “Time-division color electroholography using one-chip RGB LED and synchronizing controller,” Opt. Express 19(13), 12008–12013 (2011).
[Crossref] [PubMed]

A. Pelagotti, M. Paturzo, M. Locatelli, A. Geltrude, R. Meucci, A. Finizio, and P. Ferraro, “An automatic method for assembling a large synthetic aperture digital hologram,” Opt. Express 20(5), 4830–4839 (2012).
[Crossref] [PubMed]

J.-S. Chen and D. P. Chu, “Improved layer-based method for rapid hologram generation and real-time interactive holographic display applications,” Opt. Express 23(14), 18143–18155 (2015).
[Crossref] [PubMed]

A. Symeonidou, D. Blinder, A. Munteanu, and P. Schelkens, “Computer-generated holograms by multiple wavefront recording plane method with occlusion culling,” Opt. Express 23(17), 22149–22161 (2015).
[Crossref] [PubMed]

G. Xue, J. Liu, X. Li, J. Jia, Z. Zhang, B. Hu, and Y. Wang, “Multiplexing encoding method for full-color dynamic 3D holographic display,” Opt. Express 22(15), 18473–18482 (2014).
[Crossref] [PubMed]

A. Jesacher, S. Bernet, and M. Ritsch-Marte, “Colour hologram projection with an SLM by exploiting its full phase modulation range,” Opt. Express 22(17), 20530–20541 (2014).
[Crossref] [PubMed]

Y. Kim, E. Stoykova, H. Kang, S. Hong, J. Park, J. Park, and J. Hong, “Seamless full color holographic printing method based on spatial partitioning of SLM,” Opt. Express 23(1), 172–182 (2015).
[Crossref] [PubMed]

O. Kopylov, A. Bañas, M. Villangca, D. Palima, and J. Glückstad, “GPC light shaping a supercontinuum source,” Opt. Express 23(3), 1894–1905 (2015).
[Crossref] [PubMed]

T. Leportier, M. C. Park, Y. S. Kim, and T. Kim, “Converting optical scanning holograms of real objects to binary Fourier holograms using an iterative direct binary search algorithm,” Opt. Express 23(3), 3403–3411 (2015).
[Crossref] [PubMed]

M. Kujawinska, T. Kozacki, C. Falldorf, T. Meeser, B. M. Hennelly, P. Garbat, W. Zaperty, M. Niemelä, G. Finke, M. Kowiel, and T. Naughton, “Multiwavefront digital holographic television,” Opt. Express 22(3), 2324–2336 (2014).
[Crossref] [PubMed]

E. Moon, M. Kim, J. Roh, H. Kim, and J. Hahn, “Holographic head-mounted display with RGB light emitting diode light source,” Opt. Express 22(6), 6526–6534 (2014).
[Crossref] [PubMed]

T. Ito and K. Okano, “Color electroholography by three colored reference lights simultaneously incident upon one hologram panel,” Opt. Express 12(18), 4320–4325 (2004).
[Crossref] [PubMed]

T. Inoue and Y. Takaki, “Table screen 360-degree holographic display using circular viewing-zone scanning,” Opt. Express 23(5), 6533–6542 (2015).
[Crossref] [PubMed]

Opt. Lasers Eng. (1)

J.-Y. Son, J.-W. Kim, K.-A. Moon, J.-H. Kim, and O. Chernyshov, “Viewing conditions of multiplexed holographic images,” Opt. Lasers Eng. 71, 66–73 (2015).
[Crossref]

Opt. Lett. (4)

Proc. SPIE (1)

M. Chlipała and T. Kozacki, “Resolution limits in holographic display with LED illumination,” Proc. SPIE 9527, 95270A (2015).
[Crossref]

Sci. Rep. (1)

H. Sasaki, K. Yamamoto, Y. Ichihashi, and T. Senoh, “Image size scalable full-parallax coloured three-dimensional video by electronic holography,” Sci. Rep. 4, 4000 (2014).
[PubMed]

Supplementary Material (2)

NameDescription
» Visualization 1: AVI (8219 KB)      Rotating Dog object
» Visualization 2: AVI (1443 KB)      Walking Dog object

Cited By

OSA participates in Crossref's Cited-By Linking service. Citing articles from OSA journals and other participating publishers are listed here.

Alert me when this article is cited.


Figures (7)

Fig. 1
Fig. 1

a) Color holographic display system based on the FDM with white light and large size incoherent LED source; b) Normalized output power spectrum of each of the RGB channels.

Fig. 2
Fig. 2

Diagram of the FDM coding of RGB component holograms into white light hologram; Left column ‘Real domain’ represents RGB input holographic images; Column ‘Frequency domain’ illustrates generation of a real hologram; Right column ‘Real domain’ represents post processing part of the FDM coding: nonlinear correction, phase conversion.

Fig. 3
Fig. 3

Accuracy of the CF procedure for amplitude linearization.

Fig. 4
Fig. 4

a) Phase line responses used for corresponding RGB component holograms; b) Measured phase responses of calibrated SLM wavelengths: 445, 532, 660 [nm].

Fig. 5
Fig. 5

a) Captured images of white light reconstruction of hologram generated for gray Gargoyle projection photo. Photos of reconstructions of corresponding RGB components b) R, c) G, and d) B.

Fig. 6
Fig. 6

White light reconstructions of baboon and Rubik’s cube projection photos designed and captured for different reconstruction distances; a) and b) presents the images captured for holograms designed for reconstruction distance zrec = 0 mm. The images have dimensions 7.2 × 7.2 [mm].

Fig. 7
Fig. 7

White light reconstructions of 3D object designed for two different depths; (a) – (e) center of the object is 10 mm from the SLM, while for (f) – (j) 50 mm. The images were captured with CCD for different in-focus positions: (a) and (f) – nose, (b) and (g) right eye, (c) and (h) neck with locket, (d) and (i) bottom, (e) and (j) tail. The images have dimensions 7.2 × 7.2 [mm]. See Visualization 1 and Visualization 2 illustrating rotating and walking dog, respectively. For both visualizations the camera is placed at zrec = 15 mm.

Equations (8)

Equations on this page are rendered with MathJax. Learn more.

Δ Y BR,BG =F( λ R,G λ B )/6Δ.
1 4Δ < f x < 1 4Δ ,and 1 6Δ <fy< 1 6Δ .
u real (x)=0.5 p=R,G,B β p u BL,p (x)exp{2πix f m,p }+ β p u ¯ BL,p (x)exp{2πix f m,p },
u(x)=exp{i u real (x)}.
u(x)=0.5 p=R,G,B q= J q { β p | u BL,p (x) |}×exp{2πiqx f m,p + iqArg{ u BL,p (x)}}.
u r (x)=0.5 p=R,G,B J 1 { β p | u BL,p (x) |}×exp{2πix f m,p + iArg{ u BL,p (x)}}.
u r (x)=0.5 p=R,G,B β p u BL,p (x)exp{2πix f m,p } = 0.5 p=R,G,B J 1 {CF( β p | u BL,p (x) |)}×exp{2πix f m,p + iArg{ u BL,p (x)}},
J 1 (CF( β p | u BLc,p (x) |))= β p | u BL,p (x) |,

Metrics