Abstract

A miniature fiber-optic Fabry-Perot is built on the tip of a single mode fiber with a thin silk fibroin film as the diaphragm for pressure measurement. The silk fibroin film is regenerated from aqueous silk fibroin solution obtained by an environmentally benign fabrication process, which exhibits excellent optical and physicochemical properties, such as transparency in visible and near infrared region, membrane-forming ability, good adhesion, and high mechanical strength. The resulted Fabry-Perot pressure sensor is therefore highly biocompatible and shows good airtightness with a response of 12.3 nm/kPa in terms of cavity length change.

© 2016 Optical Society of America

Full Article  |  PDF Article
OSA Recommended Articles
High-sensitivity fiber-tip pressure sensor with graphene diaphragm

Jun Ma, Wei Jin, Hoi Lut Ho, and Ji Yan Dai
Opt. Lett. 37(13) 2493-2495 (2012)

Sub-micron silica diaphragm-based fiber-tip Fabry–Perot interferometer for pressure measurement

Changrui Liao, Shen Liu, Lei Xu, Chao Wang, Yiping Wang, Zhengyong Li, Qiao Wang, and D. N. Wang
Opt. Lett. 39(10) 2827-2830 (2014)

All-fiber high-sensitivity pressure sensor with SiO2 diaphragm

Denis Donlagic and Edvard Cibula
Opt. Lett. 30(16) 2071-2073 (2005)

References

  • View by:
  • |
  • |
  • |

  1. C. A. Mills, M. Navarro, E. Engel, E. Martinez, M. P. Ginebra, J. Planell, A. Errachid, and J. Samitier, “Transparent micro- and nanopatterned poly(lactic acid) for biomedical applications,” J. Biomed. Mater. Res. A 76(4), 781–787 (2006).
    [Crossref] [PubMed]
  2. T.-G. Cha, B. A. Baker, M. D. Sauffer, J. Salgado, D. Jaroch, J. L. Rickus, D. M. Porterfield, and J. H. Choi, “Optical nanosensor architecture for cell-signaling molecules using DNA aptamer-coated carbon nanotubes,” ACS Nano 5(5), 4236–4244 (2011).
    [Crossref] [PubMed]
  3. Q. Wang, J. Y. Zhu, and J. M. Considine, “Strong and optically transparent films prepared using cellulosic solid residue recovered from cellulose nanocrystals production waste stream,” ACS Appl. Mater. Interfaces 5(7), 2527–2534 (2013).
    [Crossref] [PubMed]
  4. L. H. Chen, T. Li, C. C. Chan, R. Menon, P. Balamurali, M. Shaillender, B. Neu, X. M. Ang, P. Zu, W. C. Wong, and K. C. Leong, “Chitosan based fiber-optic Fabry-Perot humidity sensor,” Sens. Actuators B Chem. 169, 167–172 (2012).
    [Crossref]
  5. L. Yu, K. Dean, and L. Li, “Polymer blends and composites from renewable resources,” Prog. Polym. Sci. 31(6), 576–602 (2006).
    [Crossref]
  6. C. Jiang, X. Wang, R. Gunawidjaja, Y.-H. Lin, M. K. Gupta, D. L. Kaplan, R. R. Naik, and V. V. Tsukruk, “Mechanical properties of robust ultrathin silk fibroin films,” Adv. Funct. Mater. 17(13), 2229–2237 (2007).
    [Crossref]
  7. H. Tao, D. L. Kaplan, and F. G. Omenetto, “Silk materials - a road to sustainable high technology,” Adv. Mater. 24(21), 2824–2837 (2012).
    [Crossref] [PubMed]
  8. P. Domachuk, H. Perry, J. J. Amsden, D. L. Kaplan, and F. G. Omenetto, “Bioactive “self-sensing” optical systems,” Appl. Phys. Lett. 95(25), 253702 (2009).
    [Crossref] [PubMed]
  9. F. Galeotti, A. Andicsova, S. Yunus, and C. Botta, “Precise surface patterning of silk fibroin films by breath figures,” Soft Matter 8(17), 4815–4821 (2012).
    [Crossref]
  10. J. Ma, W. Jin, H. L. Ho, and J. Y. Dai, “High-sensitivity Fiber-Tip pressure sensor with graphene diaphragm,” Opt. Lett. 37(13), 2493–2495 (2012).
    [Crossref] [PubMed]
  11. C. Liao, S. Liu, L. Xu, C. Wang, Y. Wang, Z. Li, Q. Wang, and D. N. Wang, “Sub-micron silica diaphragm-based fiber-tip Fabry-Perot interferometer for pressure measurement,” Opt. Lett. 39(10), 2827–2830 (2014).
    [Crossref] [PubMed]
  12. J. Eom, C.-J. Park, B. H. Lee, J.-H. Lee, I.-B. Kwon, and E. Chung, “Fiber optic Fabry-Perot pressure based on lensed fiber and polymeric diaphragm,” Sens. Actuators A Phys. 225, 25–32 (2015).
    [Crossref]
  13. X. Wu and O. Solgaard, “Short-cavity multimode fiber-tip Fabry-Pérot sensors,” Opt. Express 21(12), 14487–14499 (2013).
    [Crossref] [PubMed]
  14. L. H. Chen, C. C. Chan, W. Yuan, S. K. Goh, and J. Sun, “High performance chitosan diaphragm-based fiber-optic acoustic sensor,” Sens. Actuators A Phys. 163(1), 42–47 (2010).
    [Crossref]
  15. B. Feng, R. Y. Hong, L. S. Wang, L. Guo, H. Z. Li, J. Ding, Y. Zheng, and D. G. Wei, “Synthesis of Fe3O4/APTES/PEG diacid functionalized magnetic nanoparticles for MR imaging,” Colloid Surface A 328(1-3), 52–59 (2008).
    [Crossref]
  16. V. K. S. Hsiao, J. R. Waldeisen, Y. Zheng, P. F. Lloyd, T. J. Bunning, and T. J. Huang, “Aminopropyltriethoxysilane (APTES)-functionalized nanoporous polymeric gratings: fabrication and application in biosensing,” J. Mater. Chem. 17(46), 4896–4901 (2007).
    [Crossref]

2015 (1)

J. Eom, C.-J. Park, B. H. Lee, J.-H. Lee, I.-B. Kwon, and E. Chung, “Fiber optic Fabry-Perot pressure based on lensed fiber and polymeric diaphragm,” Sens. Actuators A Phys. 225, 25–32 (2015).
[Crossref]

2014 (1)

2013 (2)

X. Wu and O. Solgaard, “Short-cavity multimode fiber-tip Fabry-Pérot sensors,” Opt. Express 21(12), 14487–14499 (2013).
[Crossref] [PubMed]

Q. Wang, J. Y. Zhu, and J. M. Considine, “Strong and optically transparent films prepared using cellulosic solid residue recovered from cellulose nanocrystals production waste stream,” ACS Appl. Mater. Interfaces 5(7), 2527–2534 (2013).
[Crossref] [PubMed]

2012 (4)

L. H. Chen, T. Li, C. C. Chan, R. Menon, P. Balamurali, M. Shaillender, B. Neu, X. M. Ang, P. Zu, W. C. Wong, and K. C. Leong, “Chitosan based fiber-optic Fabry-Perot humidity sensor,” Sens. Actuators B Chem. 169, 167–172 (2012).
[Crossref]

H. Tao, D. L. Kaplan, and F. G. Omenetto, “Silk materials - a road to sustainable high technology,” Adv. Mater. 24(21), 2824–2837 (2012).
[Crossref] [PubMed]

F. Galeotti, A. Andicsova, S. Yunus, and C. Botta, “Precise surface patterning of silk fibroin films by breath figures,” Soft Matter 8(17), 4815–4821 (2012).
[Crossref]

J. Ma, W. Jin, H. L. Ho, and J. Y. Dai, “High-sensitivity Fiber-Tip pressure sensor with graphene diaphragm,” Opt. Lett. 37(13), 2493–2495 (2012).
[Crossref] [PubMed]

2011 (1)

T.-G. Cha, B. A. Baker, M. D. Sauffer, J. Salgado, D. Jaroch, J. L. Rickus, D. M. Porterfield, and J. H. Choi, “Optical nanosensor architecture for cell-signaling molecules using DNA aptamer-coated carbon nanotubes,” ACS Nano 5(5), 4236–4244 (2011).
[Crossref] [PubMed]

2010 (1)

L. H. Chen, C. C. Chan, W. Yuan, S. K. Goh, and J. Sun, “High performance chitosan diaphragm-based fiber-optic acoustic sensor,” Sens. Actuators A Phys. 163(1), 42–47 (2010).
[Crossref]

2009 (1)

P. Domachuk, H. Perry, J. J. Amsden, D. L. Kaplan, and F. G. Omenetto, “Bioactive “self-sensing” optical systems,” Appl. Phys. Lett. 95(25), 253702 (2009).
[Crossref] [PubMed]

2008 (1)

B. Feng, R. Y. Hong, L. S. Wang, L. Guo, H. Z. Li, J. Ding, Y. Zheng, and D. G. Wei, “Synthesis of Fe3O4/APTES/PEG diacid functionalized magnetic nanoparticles for MR imaging,” Colloid Surface A 328(1-3), 52–59 (2008).
[Crossref]

2007 (2)

V. K. S. Hsiao, J. R. Waldeisen, Y. Zheng, P. F. Lloyd, T. J. Bunning, and T. J. Huang, “Aminopropyltriethoxysilane (APTES)-functionalized nanoporous polymeric gratings: fabrication and application in biosensing,” J. Mater. Chem. 17(46), 4896–4901 (2007).
[Crossref]

C. Jiang, X. Wang, R. Gunawidjaja, Y.-H. Lin, M. K. Gupta, D. L. Kaplan, R. R. Naik, and V. V. Tsukruk, “Mechanical properties of robust ultrathin silk fibroin films,” Adv. Funct. Mater. 17(13), 2229–2237 (2007).
[Crossref]

2006 (2)

C. A. Mills, M. Navarro, E. Engel, E. Martinez, M. P. Ginebra, J. Planell, A. Errachid, and J. Samitier, “Transparent micro- and nanopatterned poly(lactic acid) for biomedical applications,” J. Biomed. Mater. Res. A 76(4), 781–787 (2006).
[Crossref] [PubMed]

L. Yu, K. Dean, and L. Li, “Polymer blends and composites from renewable resources,” Prog. Polym. Sci. 31(6), 576–602 (2006).
[Crossref]

Amsden, J. J.

P. Domachuk, H. Perry, J. J. Amsden, D. L. Kaplan, and F. G. Omenetto, “Bioactive “self-sensing” optical systems,” Appl. Phys. Lett. 95(25), 253702 (2009).
[Crossref] [PubMed]

Andicsova, A.

F. Galeotti, A. Andicsova, S. Yunus, and C. Botta, “Precise surface patterning of silk fibroin films by breath figures,” Soft Matter 8(17), 4815–4821 (2012).
[Crossref]

Ang, X. M.

L. H. Chen, T. Li, C. C. Chan, R. Menon, P. Balamurali, M. Shaillender, B. Neu, X. M. Ang, P. Zu, W. C. Wong, and K. C. Leong, “Chitosan based fiber-optic Fabry-Perot humidity sensor,” Sens. Actuators B Chem. 169, 167–172 (2012).
[Crossref]

Baker, B. A.

T.-G. Cha, B. A. Baker, M. D. Sauffer, J. Salgado, D. Jaroch, J. L. Rickus, D. M. Porterfield, and J. H. Choi, “Optical nanosensor architecture for cell-signaling molecules using DNA aptamer-coated carbon nanotubes,” ACS Nano 5(5), 4236–4244 (2011).
[Crossref] [PubMed]

Balamurali, P.

L. H. Chen, T. Li, C. C. Chan, R. Menon, P. Balamurali, M. Shaillender, B. Neu, X. M. Ang, P. Zu, W. C. Wong, and K. C. Leong, “Chitosan based fiber-optic Fabry-Perot humidity sensor,” Sens. Actuators B Chem. 169, 167–172 (2012).
[Crossref]

Botta, C.

F. Galeotti, A. Andicsova, S. Yunus, and C. Botta, “Precise surface patterning of silk fibroin films by breath figures,” Soft Matter 8(17), 4815–4821 (2012).
[Crossref]

Bunning, T. J.

V. K. S. Hsiao, J. R. Waldeisen, Y. Zheng, P. F. Lloyd, T. J. Bunning, and T. J. Huang, “Aminopropyltriethoxysilane (APTES)-functionalized nanoporous polymeric gratings: fabrication and application in biosensing,” J. Mater. Chem. 17(46), 4896–4901 (2007).
[Crossref]

Cha, T.-G.

T.-G. Cha, B. A. Baker, M. D. Sauffer, J. Salgado, D. Jaroch, J. L. Rickus, D. M. Porterfield, and J. H. Choi, “Optical nanosensor architecture for cell-signaling molecules using DNA aptamer-coated carbon nanotubes,” ACS Nano 5(5), 4236–4244 (2011).
[Crossref] [PubMed]

Chan, C. C.

L. H. Chen, T. Li, C. C. Chan, R. Menon, P. Balamurali, M. Shaillender, B. Neu, X. M. Ang, P. Zu, W. C. Wong, and K. C. Leong, “Chitosan based fiber-optic Fabry-Perot humidity sensor,” Sens. Actuators B Chem. 169, 167–172 (2012).
[Crossref]

L. H. Chen, C. C. Chan, W. Yuan, S. K. Goh, and J. Sun, “High performance chitosan diaphragm-based fiber-optic acoustic sensor,” Sens. Actuators A Phys. 163(1), 42–47 (2010).
[Crossref]

Chen, L. H.

L. H. Chen, T. Li, C. C. Chan, R. Menon, P. Balamurali, M. Shaillender, B. Neu, X. M. Ang, P. Zu, W. C. Wong, and K. C. Leong, “Chitosan based fiber-optic Fabry-Perot humidity sensor,” Sens. Actuators B Chem. 169, 167–172 (2012).
[Crossref]

L. H. Chen, C. C. Chan, W. Yuan, S. K. Goh, and J. Sun, “High performance chitosan diaphragm-based fiber-optic acoustic sensor,” Sens. Actuators A Phys. 163(1), 42–47 (2010).
[Crossref]

Choi, J. H.

T.-G. Cha, B. A. Baker, M. D. Sauffer, J. Salgado, D. Jaroch, J. L. Rickus, D. M. Porterfield, and J. H. Choi, “Optical nanosensor architecture for cell-signaling molecules using DNA aptamer-coated carbon nanotubes,” ACS Nano 5(5), 4236–4244 (2011).
[Crossref] [PubMed]

Chung, E.

J. Eom, C.-J. Park, B. H. Lee, J.-H. Lee, I.-B. Kwon, and E. Chung, “Fiber optic Fabry-Perot pressure based on lensed fiber and polymeric diaphragm,” Sens. Actuators A Phys. 225, 25–32 (2015).
[Crossref]

Considine, J. M.

Q. Wang, J. Y. Zhu, and J. M. Considine, “Strong and optically transparent films prepared using cellulosic solid residue recovered from cellulose nanocrystals production waste stream,” ACS Appl. Mater. Interfaces 5(7), 2527–2534 (2013).
[Crossref] [PubMed]

Dai, J. Y.

Dean, K.

L. Yu, K. Dean, and L. Li, “Polymer blends and composites from renewable resources,” Prog. Polym. Sci. 31(6), 576–602 (2006).
[Crossref]

Ding, J.

B. Feng, R. Y. Hong, L. S. Wang, L. Guo, H. Z. Li, J. Ding, Y. Zheng, and D. G. Wei, “Synthesis of Fe3O4/APTES/PEG diacid functionalized magnetic nanoparticles for MR imaging,” Colloid Surface A 328(1-3), 52–59 (2008).
[Crossref]

Domachuk, P.

P. Domachuk, H. Perry, J. J. Amsden, D. L. Kaplan, and F. G. Omenetto, “Bioactive “self-sensing” optical systems,” Appl. Phys. Lett. 95(25), 253702 (2009).
[Crossref] [PubMed]

Engel, E.

C. A. Mills, M. Navarro, E. Engel, E. Martinez, M. P. Ginebra, J. Planell, A. Errachid, and J. Samitier, “Transparent micro- and nanopatterned poly(lactic acid) for biomedical applications,” J. Biomed. Mater. Res. A 76(4), 781–787 (2006).
[Crossref] [PubMed]

Eom, J.

J. Eom, C.-J. Park, B. H. Lee, J.-H. Lee, I.-B. Kwon, and E. Chung, “Fiber optic Fabry-Perot pressure based on lensed fiber and polymeric diaphragm,” Sens. Actuators A Phys. 225, 25–32 (2015).
[Crossref]

Errachid, A.

C. A. Mills, M. Navarro, E. Engel, E. Martinez, M. P. Ginebra, J. Planell, A. Errachid, and J. Samitier, “Transparent micro- and nanopatterned poly(lactic acid) for biomedical applications,” J. Biomed. Mater. Res. A 76(4), 781–787 (2006).
[Crossref] [PubMed]

Feng, B.

B. Feng, R. Y. Hong, L. S. Wang, L. Guo, H. Z. Li, J. Ding, Y. Zheng, and D. G. Wei, “Synthesis of Fe3O4/APTES/PEG diacid functionalized magnetic nanoparticles for MR imaging,” Colloid Surface A 328(1-3), 52–59 (2008).
[Crossref]

Galeotti, F.

F. Galeotti, A. Andicsova, S. Yunus, and C. Botta, “Precise surface patterning of silk fibroin films by breath figures,” Soft Matter 8(17), 4815–4821 (2012).
[Crossref]

Ginebra, M. P.

C. A. Mills, M. Navarro, E. Engel, E. Martinez, M. P. Ginebra, J. Planell, A. Errachid, and J. Samitier, “Transparent micro- and nanopatterned poly(lactic acid) for biomedical applications,” J. Biomed. Mater. Res. A 76(4), 781–787 (2006).
[Crossref] [PubMed]

Goh, S. K.

L. H. Chen, C. C. Chan, W. Yuan, S. K. Goh, and J. Sun, “High performance chitosan diaphragm-based fiber-optic acoustic sensor,” Sens. Actuators A Phys. 163(1), 42–47 (2010).
[Crossref]

Gunawidjaja, R.

C. Jiang, X. Wang, R. Gunawidjaja, Y.-H. Lin, M. K. Gupta, D. L. Kaplan, R. R. Naik, and V. V. Tsukruk, “Mechanical properties of robust ultrathin silk fibroin films,” Adv. Funct. Mater. 17(13), 2229–2237 (2007).
[Crossref]

Guo, L.

B. Feng, R. Y. Hong, L. S. Wang, L. Guo, H. Z. Li, J. Ding, Y. Zheng, and D. G. Wei, “Synthesis of Fe3O4/APTES/PEG diacid functionalized magnetic nanoparticles for MR imaging,” Colloid Surface A 328(1-3), 52–59 (2008).
[Crossref]

Gupta, M. K.

C. Jiang, X. Wang, R. Gunawidjaja, Y.-H. Lin, M. K. Gupta, D. L. Kaplan, R. R. Naik, and V. V. Tsukruk, “Mechanical properties of robust ultrathin silk fibroin films,” Adv. Funct. Mater. 17(13), 2229–2237 (2007).
[Crossref]

Ho, H. L.

Hong, R. Y.

B. Feng, R. Y. Hong, L. S. Wang, L. Guo, H. Z. Li, J. Ding, Y. Zheng, and D. G. Wei, “Synthesis of Fe3O4/APTES/PEG diacid functionalized magnetic nanoparticles for MR imaging,” Colloid Surface A 328(1-3), 52–59 (2008).
[Crossref]

Hsiao, V. K. S.

V. K. S. Hsiao, J. R. Waldeisen, Y. Zheng, P. F. Lloyd, T. J. Bunning, and T. J. Huang, “Aminopropyltriethoxysilane (APTES)-functionalized nanoporous polymeric gratings: fabrication and application in biosensing,” J. Mater. Chem. 17(46), 4896–4901 (2007).
[Crossref]

Huang, T. J.

V. K. S. Hsiao, J. R. Waldeisen, Y. Zheng, P. F. Lloyd, T. J. Bunning, and T. J. Huang, “Aminopropyltriethoxysilane (APTES)-functionalized nanoporous polymeric gratings: fabrication and application in biosensing,” J. Mater. Chem. 17(46), 4896–4901 (2007).
[Crossref]

Jaroch, D.

T.-G. Cha, B. A. Baker, M. D. Sauffer, J. Salgado, D. Jaroch, J. L. Rickus, D. M. Porterfield, and J. H. Choi, “Optical nanosensor architecture for cell-signaling molecules using DNA aptamer-coated carbon nanotubes,” ACS Nano 5(5), 4236–4244 (2011).
[Crossref] [PubMed]

Jiang, C.

C. Jiang, X. Wang, R. Gunawidjaja, Y.-H. Lin, M. K. Gupta, D. L. Kaplan, R. R. Naik, and V. V. Tsukruk, “Mechanical properties of robust ultrathin silk fibroin films,” Adv. Funct. Mater. 17(13), 2229–2237 (2007).
[Crossref]

Jin, W.

Kaplan, D. L.

H. Tao, D. L. Kaplan, and F. G. Omenetto, “Silk materials - a road to sustainable high technology,” Adv. Mater. 24(21), 2824–2837 (2012).
[Crossref] [PubMed]

P. Domachuk, H. Perry, J. J. Amsden, D. L. Kaplan, and F. G. Omenetto, “Bioactive “self-sensing” optical systems,” Appl. Phys. Lett. 95(25), 253702 (2009).
[Crossref] [PubMed]

C. Jiang, X. Wang, R. Gunawidjaja, Y.-H. Lin, M. K. Gupta, D. L. Kaplan, R. R. Naik, and V. V. Tsukruk, “Mechanical properties of robust ultrathin silk fibroin films,” Adv. Funct. Mater. 17(13), 2229–2237 (2007).
[Crossref]

Kwon, I.-B.

J. Eom, C.-J. Park, B. H. Lee, J.-H. Lee, I.-B. Kwon, and E. Chung, “Fiber optic Fabry-Perot pressure based on lensed fiber and polymeric diaphragm,” Sens. Actuators A Phys. 225, 25–32 (2015).
[Crossref]

Lee, B. H.

J. Eom, C.-J. Park, B. H. Lee, J.-H. Lee, I.-B. Kwon, and E. Chung, “Fiber optic Fabry-Perot pressure based on lensed fiber and polymeric diaphragm,” Sens. Actuators A Phys. 225, 25–32 (2015).
[Crossref]

Lee, J.-H.

J. Eom, C.-J. Park, B. H. Lee, J.-H. Lee, I.-B. Kwon, and E. Chung, “Fiber optic Fabry-Perot pressure based on lensed fiber and polymeric diaphragm,” Sens. Actuators A Phys. 225, 25–32 (2015).
[Crossref]

Leong, K. C.

L. H. Chen, T. Li, C. C. Chan, R. Menon, P. Balamurali, M. Shaillender, B. Neu, X. M. Ang, P. Zu, W. C. Wong, and K. C. Leong, “Chitosan based fiber-optic Fabry-Perot humidity sensor,” Sens. Actuators B Chem. 169, 167–172 (2012).
[Crossref]

Li, H. Z.

B. Feng, R. Y. Hong, L. S. Wang, L. Guo, H. Z. Li, J. Ding, Y. Zheng, and D. G. Wei, “Synthesis of Fe3O4/APTES/PEG diacid functionalized magnetic nanoparticles for MR imaging,” Colloid Surface A 328(1-3), 52–59 (2008).
[Crossref]

Li, L.

L. Yu, K. Dean, and L. Li, “Polymer blends and composites from renewable resources,” Prog. Polym. Sci. 31(6), 576–602 (2006).
[Crossref]

Li, T.

L. H. Chen, T. Li, C. C. Chan, R. Menon, P. Balamurali, M. Shaillender, B. Neu, X. M. Ang, P. Zu, W. C. Wong, and K. C. Leong, “Chitosan based fiber-optic Fabry-Perot humidity sensor,” Sens. Actuators B Chem. 169, 167–172 (2012).
[Crossref]

Li, Z.

Liao, C.

Lin, Y.-H.

C. Jiang, X. Wang, R. Gunawidjaja, Y.-H. Lin, M. K. Gupta, D. L. Kaplan, R. R. Naik, and V. V. Tsukruk, “Mechanical properties of robust ultrathin silk fibroin films,” Adv. Funct. Mater. 17(13), 2229–2237 (2007).
[Crossref]

Liu, S.

Lloyd, P. F.

V. K. S. Hsiao, J. R. Waldeisen, Y. Zheng, P. F. Lloyd, T. J. Bunning, and T. J. Huang, “Aminopropyltriethoxysilane (APTES)-functionalized nanoporous polymeric gratings: fabrication and application in biosensing,” J. Mater. Chem. 17(46), 4896–4901 (2007).
[Crossref]

Ma, J.

Martinez, E.

C. A. Mills, M. Navarro, E. Engel, E. Martinez, M. P. Ginebra, J. Planell, A. Errachid, and J. Samitier, “Transparent micro- and nanopatterned poly(lactic acid) for biomedical applications,” J. Biomed. Mater. Res. A 76(4), 781–787 (2006).
[Crossref] [PubMed]

Menon, R.

L. H. Chen, T. Li, C. C. Chan, R. Menon, P. Balamurali, M. Shaillender, B. Neu, X. M. Ang, P. Zu, W. C. Wong, and K. C. Leong, “Chitosan based fiber-optic Fabry-Perot humidity sensor,” Sens. Actuators B Chem. 169, 167–172 (2012).
[Crossref]

Mills, C. A.

C. A. Mills, M. Navarro, E. Engel, E. Martinez, M. P. Ginebra, J. Planell, A. Errachid, and J. Samitier, “Transparent micro- and nanopatterned poly(lactic acid) for biomedical applications,” J. Biomed. Mater. Res. A 76(4), 781–787 (2006).
[Crossref] [PubMed]

Naik, R. R.

C. Jiang, X. Wang, R. Gunawidjaja, Y.-H. Lin, M. K. Gupta, D. L. Kaplan, R. R. Naik, and V. V. Tsukruk, “Mechanical properties of robust ultrathin silk fibroin films,” Adv. Funct. Mater. 17(13), 2229–2237 (2007).
[Crossref]

Navarro, M.

C. A. Mills, M. Navarro, E. Engel, E. Martinez, M. P. Ginebra, J. Planell, A. Errachid, and J. Samitier, “Transparent micro- and nanopatterned poly(lactic acid) for biomedical applications,” J. Biomed. Mater. Res. A 76(4), 781–787 (2006).
[Crossref] [PubMed]

Neu, B.

L. H. Chen, T. Li, C. C. Chan, R. Menon, P. Balamurali, M. Shaillender, B. Neu, X. M. Ang, P. Zu, W. C. Wong, and K. C. Leong, “Chitosan based fiber-optic Fabry-Perot humidity sensor,” Sens. Actuators B Chem. 169, 167–172 (2012).
[Crossref]

Omenetto, F. G.

H. Tao, D. L. Kaplan, and F. G. Omenetto, “Silk materials - a road to sustainable high technology,” Adv. Mater. 24(21), 2824–2837 (2012).
[Crossref] [PubMed]

P. Domachuk, H. Perry, J. J. Amsden, D. L. Kaplan, and F. G. Omenetto, “Bioactive “self-sensing” optical systems,” Appl. Phys. Lett. 95(25), 253702 (2009).
[Crossref] [PubMed]

Park, C.-J.

J. Eom, C.-J. Park, B. H. Lee, J.-H. Lee, I.-B. Kwon, and E. Chung, “Fiber optic Fabry-Perot pressure based on lensed fiber and polymeric diaphragm,” Sens. Actuators A Phys. 225, 25–32 (2015).
[Crossref]

Perry, H.

P. Domachuk, H. Perry, J. J. Amsden, D. L. Kaplan, and F. G. Omenetto, “Bioactive “self-sensing” optical systems,” Appl. Phys. Lett. 95(25), 253702 (2009).
[Crossref] [PubMed]

Planell, J.

C. A. Mills, M. Navarro, E. Engel, E. Martinez, M. P. Ginebra, J. Planell, A. Errachid, and J. Samitier, “Transparent micro- and nanopatterned poly(lactic acid) for biomedical applications,” J. Biomed. Mater. Res. A 76(4), 781–787 (2006).
[Crossref] [PubMed]

Porterfield, D. M.

T.-G. Cha, B. A. Baker, M. D. Sauffer, J. Salgado, D. Jaroch, J. L. Rickus, D. M. Porterfield, and J. H. Choi, “Optical nanosensor architecture for cell-signaling molecules using DNA aptamer-coated carbon nanotubes,” ACS Nano 5(5), 4236–4244 (2011).
[Crossref] [PubMed]

Rickus, J. L.

T.-G. Cha, B. A. Baker, M. D. Sauffer, J. Salgado, D. Jaroch, J. L. Rickus, D. M. Porterfield, and J. H. Choi, “Optical nanosensor architecture for cell-signaling molecules using DNA aptamer-coated carbon nanotubes,” ACS Nano 5(5), 4236–4244 (2011).
[Crossref] [PubMed]

Salgado, J.

T.-G. Cha, B. A. Baker, M. D. Sauffer, J. Salgado, D. Jaroch, J. L. Rickus, D. M. Porterfield, and J. H. Choi, “Optical nanosensor architecture for cell-signaling molecules using DNA aptamer-coated carbon nanotubes,” ACS Nano 5(5), 4236–4244 (2011).
[Crossref] [PubMed]

Samitier, J.

C. A. Mills, M. Navarro, E. Engel, E. Martinez, M. P. Ginebra, J. Planell, A. Errachid, and J. Samitier, “Transparent micro- and nanopatterned poly(lactic acid) for biomedical applications,” J. Biomed. Mater. Res. A 76(4), 781–787 (2006).
[Crossref] [PubMed]

Sauffer, M. D.

T.-G. Cha, B. A. Baker, M. D. Sauffer, J. Salgado, D. Jaroch, J. L. Rickus, D. M. Porterfield, and J. H. Choi, “Optical nanosensor architecture for cell-signaling molecules using DNA aptamer-coated carbon nanotubes,” ACS Nano 5(5), 4236–4244 (2011).
[Crossref] [PubMed]

Shaillender, M.

L. H. Chen, T. Li, C. C. Chan, R. Menon, P. Balamurali, M. Shaillender, B. Neu, X. M. Ang, P. Zu, W. C. Wong, and K. C. Leong, “Chitosan based fiber-optic Fabry-Perot humidity sensor,” Sens. Actuators B Chem. 169, 167–172 (2012).
[Crossref]

Solgaard, O.

Sun, J.

L. H. Chen, C. C. Chan, W. Yuan, S. K. Goh, and J. Sun, “High performance chitosan diaphragm-based fiber-optic acoustic sensor,” Sens. Actuators A Phys. 163(1), 42–47 (2010).
[Crossref]

Tao, H.

H. Tao, D. L. Kaplan, and F. G. Omenetto, “Silk materials - a road to sustainable high technology,” Adv. Mater. 24(21), 2824–2837 (2012).
[Crossref] [PubMed]

Tsukruk, V. V.

C. Jiang, X. Wang, R. Gunawidjaja, Y.-H. Lin, M. K. Gupta, D. L. Kaplan, R. R. Naik, and V. V. Tsukruk, “Mechanical properties of robust ultrathin silk fibroin films,” Adv. Funct. Mater. 17(13), 2229–2237 (2007).
[Crossref]

Waldeisen, J. R.

V. K. S. Hsiao, J. R. Waldeisen, Y. Zheng, P. F. Lloyd, T. J. Bunning, and T. J. Huang, “Aminopropyltriethoxysilane (APTES)-functionalized nanoporous polymeric gratings: fabrication and application in biosensing,” J. Mater. Chem. 17(46), 4896–4901 (2007).
[Crossref]

Wang, C.

Wang, D. N.

Wang, L. S.

B. Feng, R. Y. Hong, L. S. Wang, L. Guo, H. Z. Li, J. Ding, Y. Zheng, and D. G. Wei, “Synthesis of Fe3O4/APTES/PEG diacid functionalized magnetic nanoparticles for MR imaging,” Colloid Surface A 328(1-3), 52–59 (2008).
[Crossref]

Wang, Q.

C. Liao, S. Liu, L. Xu, C. Wang, Y. Wang, Z. Li, Q. Wang, and D. N. Wang, “Sub-micron silica diaphragm-based fiber-tip Fabry-Perot interferometer for pressure measurement,” Opt. Lett. 39(10), 2827–2830 (2014).
[Crossref] [PubMed]

Q. Wang, J. Y. Zhu, and J. M. Considine, “Strong and optically transparent films prepared using cellulosic solid residue recovered from cellulose nanocrystals production waste stream,” ACS Appl. Mater. Interfaces 5(7), 2527–2534 (2013).
[Crossref] [PubMed]

Wang, X.

C. Jiang, X. Wang, R. Gunawidjaja, Y.-H. Lin, M. K. Gupta, D. L. Kaplan, R. R. Naik, and V. V. Tsukruk, “Mechanical properties of robust ultrathin silk fibroin films,” Adv. Funct. Mater. 17(13), 2229–2237 (2007).
[Crossref]

Wang, Y.

Wei, D. G.

B. Feng, R. Y. Hong, L. S. Wang, L. Guo, H. Z. Li, J. Ding, Y. Zheng, and D. G. Wei, “Synthesis of Fe3O4/APTES/PEG diacid functionalized magnetic nanoparticles for MR imaging,” Colloid Surface A 328(1-3), 52–59 (2008).
[Crossref]

Wong, W. C.

L. H. Chen, T. Li, C. C. Chan, R. Menon, P. Balamurali, M. Shaillender, B. Neu, X. M. Ang, P. Zu, W. C. Wong, and K. C. Leong, “Chitosan based fiber-optic Fabry-Perot humidity sensor,” Sens. Actuators B Chem. 169, 167–172 (2012).
[Crossref]

Wu, X.

Xu, L.

Yu, L.

L. Yu, K. Dean, and L. Li, “Polymer blends and composites from renewable resources,” Prog. Polym. Sci. 31(6), 576–602 (2006).
[Crossref]

Yuan, W.

L. H. Chen, C. C. Chan, W. Yuan, S. K. Goh, and J. Sun, “High performance chitosan diaphragm-based fiber-optic acoustic sensor,” Sens. Actuators A Phys. 163(1), 42–47 (2010).
[Crossref]

Yunus, S.

F. Galeotti, A. Andicsova, S. Yunus, and C. Botta, “Precise surface patterning of silk fibroin films by breath figures,” Soft Matter 8(17), 4815–4821 (2012).
[Crossref]

Zheng, Y.

B. Feng, R. Y. Hong, L. S. Wang, L. Guo, H. Z. Li, J. Ding, Y. Zheng, and D. G. Wei, “Synthesis of Fe3O4/APTES/PEG diacid functionalized magnetic nanoparticles for MR imaging,” Colloid Surface A 328(1-3), 52–59 (2008).
[Crossref]

V. K. S. Hsiao, J. R. Waldeisen, Y. Zheng, P. F. Lloyd, T. J. Bunning, and T. J. Huang, “Aminopropyltriethoxysilane (APTES)-functionalized nanoporous polymeric gratings: fabrication and application in biosensing,” J. Mater. Chem. 17(46), 4896–4901 (2007).
[Crossref]

Zhu, J. Y.

Q. Wang, J. Y. Zhu, and J. M. Considine, “Strong and optically transparent films prepared using cellulosic solid residue recovered from cellulose nanocrystals production waste stream,” ACS Appl. Mater. Interfaces 5(7), 2527–2534 (2013).
[Crossref] [PubMed]

Zu, P.

L. H. Chen, T. Li, C. C. Chan, R. Menon, P. Balamurali, M. Shaillender, B. Neu, X. M. Ang, P. Zu, W. C. Wong, and K. C. Leong, “Chitosan based fiber-optic Fabry-Perot humidity sensor,” Sens. Actuators B Chem. 169, 167–172 (2012).
[Crossref]

ACS Appl. Mater. Interfaces (1)

Q. Wang, J. Y. Zhu, and J. M. Considine, “Strong and optically transparent films prepared using cellulosic solid residue recovered from cellulose nanocrystals production waste stream,” ACS Appl. Mater. Interfaces 5(7), 2527–2534 (2013).
[Crossref] [PubMed]

ACS Nano (1)

T.-G. Cha, B. A. Baker, M. D. Sauffer, J. Salgado, D. Jaroch, J. L. Rickus, D. M. Porterfield, and J. H. Choi, “Optical nanosensor architecture for cell-signaling molecules using DNA aptamer-coated carbon nanotubes,” ACS Nano 5(5), 4236–4244 (2011).
[Crossref] [PubMed]

Adv. Funct. Mater. (1)

C. Jiang, X. Wang, R. Gunawidjaja, Y.-H. Lin, M. K. Gupta, D. L. Kaplan, R. R. Naik, and V. V. Tsukruk, “Mechanical properties of robust ultrathin silk fibroin films,” Adv. Funct. Mater. 17(13), 2229–2237 (2007).
[Crossref]

Adv. Mater. (1)

H. Tao, D. L. Kaplan, and F. G. Omenetto, “Silk materials - a road to sustainable high technology,” Adv. Mater. 24(21), 2824–2837 (2012).
[Crossref] [PubMed]

Appl. Phys. Lett. (1)

P. Domachuk, H. Perry, J. J. Amsden, D. L. Kaplan, and F. G. Omenetto, “Bioactive “self-sensing” optical systems,” Appl. Phys. Lett. 95(25), 253702 (2009).
[Crossref] [PubMed]

Colloid Surface A (1)

B. Feng, R. Y. Hong, L. S. Wang, L. Guo, H. Z. Li, J. Ding, Y. Zheng, and D. G. Wei, “Synthesis of Fe3O4/APTES/PEG diacid functionalized magnetic nanoparticles for MR imaging,” Colloid Surface A 328(1-3), 52–59 (2008).
[Crossref]

J. Biomed. Mater. Res. A (1)

C. A. Mills, M. Navarro, E. Engel, E. Martinez, M. P. Ginebra, J. Planell, A. Errachid, and J. Samitier, “Transparent micro- and nanopatterned poly(lactic acid) for biomedical applications,” J. Biomed. Mater. Res. A 76(4), 781–787 (2006).
[Crossref] [PubMed]

J. Mater. Chem. (1)

V. K. S. Hsiao, J. R. Waldeisen, Y. Zheng, P. F. Lloyd, T. J. Bunning, and T. J. Huang, “Aminopropyltriethoxysilane (APTES)-functionalized nanoporous polymeric gratings: fabrication and application in biosensing,” J. Mater. Chem. 17(46), 4896–4901 (2007).
[Crossref]

Opt. Express (1)

Opt. Lett. (2)

Prog. Polym. Sci. (1)

L. Yu, K. Dean, and L. Li, “Polymer blends and composites from renewable resources,” Prog. Polym. Sci. 31(6), 576–602 (2006).
[Crossref]

Sens. Actuators A Phys. (2)

J. Eom, C.-J. Park, B. H. Lee, J.-H. Lee, I.-B. Kwon, and E. Chung, “Fiber optic Fabry-Perot pressure based on lensed fiber and polymeric diaphragm,” Sens. Actuators A Phys. 225, 25–32 (2015).
[Crossref]

L. H. Chen, C. C. Chan, W. Yuan, S. K. Goh, and J. Sun, “High performance chitosan diaphragm-based fiber-optic acoustic sensor,” Sens. Actuators A Phys. 163(1), 42–47 (2010).
[Crossref]

Sens. Actuators B Chem. (1)

L. H. Chen, T. Li, C. C. Chan, R. Menon, P. Balamurali, M. Shaillender, B. Neu, X. M. Ang, P. Zu, W. C. Wong, and K. C. Leong, “Chitosan based fiber-optic Fabry-Perot humidity sensor,” Sens. Actuators B Chem. 169, 167–172 (2012).
[Crossref]

Soft Matter (1)

F. Galeotti, A. Andicsova, S. Yunus, and C. Botta, “Precise surface patterning of silk fibroin films by breath figures,” Soft Matter 8(17), 4815–4821 (2012).
[Crossref]

Cited By

OSA participates in Crossref's Cited-By Linking service. Citing articles from OSA journals and other participating publishers are listed here.

Alert me when this article is cited.


Figures (7)

Fig. 1
Fig. 1

The preparation of aqueous silk fibroin solution. (a) Silk fibers of silkworm cocoons. (b) Degumming. (c) Dialysis of dissolved silk fibroin. (d) The resulted aqueous silk fibroin solution.

Fig. 2
Fig. 2

(a) Attaching a silk fibroin film to one end of the ferrule by dipping the ferrule in the silk fibroin solution. (b) The surface processing of the ferrule using APTES. (c) The schematic of the fabricated silk fibroin diaphragm-based fiber-tip Fabry-Perot pressure sensor. (d) The image of the ferrule end-face covering a silk fibroin film.

Fig. 3
Fig. 3

Experiment setup of the pressure measurement by a silk fibroin diaphragm-based fiber-tip Fabry-Perot pressure sensor. The inset shows the picture of the fabricated sensor.

Fig. 4
Fig. 4

The measured reflection spectrum silk fibroin diaphragm-based fiber-tip Fabry-Perot pressure sensor without pressure applied.

Fig. 5
Fig. 5

Fourier transform of measured reflection spectrums for various applied pressures.

Fig. 6
Fig. 6

Measured cavity length changes at various applied pressures. The solid line shows a linear fitting.

Fig. 7
Fig. 7

Cavity length change versus time for an initially applied pressure of 45 kPa. The solid line shows an exponential fitting.

Metrics