S. Moon, K. Komada, K. Sato, H. Yokohata, Y. Wada, and N. Yasuda, “Ultrafast X-ray study of multi-hole GDI injector sprays: Effects of nozzle hole length and number on initial spray formation,” Exp. Therm. Fluid Sci. 68, 68–81 (2015).
[Crossref]
S. Moon, Y. Gao, S. Park, J. Wang, N. Kurimoto, and Y. Nishijima, “Effect of the number and position of nozzle holes on in- and near-nozzle dynamic characteristics of diesel injection,” Fuel 150, 112–122 (2015).
[Crossref]
S. P. Duran, J. M. Porter, and T. E. Parker, “Picosecond ballistic imaging of diesel injection in high-temperature and high-pressure air,” Exp. Fluids 56, 1–12 (2015).
[Crossref]
C. Crua, M. R. Heikal, and M. R. Gold, “Microscopic imaging of the initial stage of diesel spray formation,” Fuel 157, 140–150 (2015).
[Crossref]
S. P. Duran, J. M. Porter, and T. E. Parker, “Ballistic imaging of diesel sprays using a picosecond laser: characterization and demonstration,” Appl. Opt. 54, 1743 (2015).
[Crossref]
H. Purwar, S. Idlahcen, C. Rozé, D. Sedarsky, and J.-B. Blaisot, “Collinear, two-color optical Kerr effect shutter for ultrafast time-resolved imaging,” Opt. Express 22, 15778–15790 (2014).
[Crossref]
[PubMed]
S. Moon, Y. Gao, J. Wang, K. Fezzaa, and T. Tsujimura, “Near-field dynamics of high-speed diesel sprays: Effects of orifice inlet geometry and injection pressure,” Fuel 133, 299–309 (2014).
[Crossref]
C. Schaschke, I. Fletcher, and N. Glen, “Density and viscosity measurement of diesel fuels at combined high pressure and elevated temperature,” Processes 1, 30–48 (2013).
[Crossref]
D. Sedarsky, S. Idlahcen, C. Rozé, and J.-B. Blaisot, “Velocity measurements in the near field of a diesel fuel injector by ultrafast imagery,” Exp. Fluids 54, 1451 (2013).
[Crossref]
M. Linne, “Imaging in the optically dense regions of a spray: A review of developing techniques,” Prog. Energy Combust. Sci. 39, 403–440 (2013).
[Crossref]
M. Linne, “Analysis of X-ray phase contrast imaging in atomizing sprays,” Exp. Fluids 52, 1201–1218 (2012).
[Crossref]
M. Baumgartl, T. Gottschall, J. Abreu-Afonso, A. Díez, T. Meyer, B. Dietzek, M. Rothhardt, J. Popp, J. Limpert, and A. Tünnermann, “Alignment-free, all-spliced fiber laser source for CARS microscopy based on four-wave-mixing,” Opt. Express 20, 21010 (2012).
[Crossref]
[PubMed]
M. Linne, D. Sedarsky, T. Meyer, J. Gord, and C. Carter, “Ballistic imaging in the near-field of an effervescent spray,” Exp. Fluids 49, 911–923 (2010).
[Crossref]
J. B. Schmidt, Z. D. Schaefer, T. R. Meyer, S. Roy, S. a. Danczyk, and J. R. Gord, “Ultrafast time-gated ballistic-photon imaging and shadowgraphy in optically dense rocket sprays,” Appl. Opt. 48, B137 (2009).
[Crossref]
[PubMed]
D. Sedarsky, J. Gord, C. Carter, T. Meyer, and M. Linne, “Fast-framing ballistic imaging of velocity in an aerated spray,” Opt. Lett. 34, 2748 (2009).
[Crossref]
[PubMed]
Y. Wang, X. Liu, K.-S. Im, W.-K. Lee, J. Wang, K. Fezzaa, D. L. S. Hung, and J. R. Winkelman, “Ultrafast X-ray study of dense-liquid-jet flow dynamics using structure-tracking velocimetry,” Nat. Phys. 4, 305–309 (2008).
[Crossref]
K.-S. Im, K. Fezzaa, Y. J. Wang, X. Liu, J. Wang, and M.-C. Lai, “Particle tracking velocimetry using fast x-ray phase-contrast imaging,” Appl. Phys. Lett. 90, 091919 (2007).
[Crossref]
M. Linne, M. Paciaroni, T. Hall, and T. Parker, “Ballistic imaging of the near field in a diesel spray,” Exp. Fluids 40, 836–846 (2006).
[Crossref]
D. Birch, C. McGuiness, K. Sagoo, and D. McLoskey, “A new sub-nanosecond LED at 280 nm: application to protein fluorescence,” Meas. Sci. Technol. 15, 19–22 (2004).
[Crossref]
M. Paciaroni and M. Linne, “Single-shot, two-dimensional ballistic imaging through scattering media,” Appl. Opt. 43, 5100 (2004).
[Crossref]
[PubMed]
A. G. MacPhee, “X-ray imaging of shock waves generated by high-pressure fuel sprays,” Science 295, 1261–1263 (2002).
[Crossref]
[PubMed]
Y. Yue, C. F. Powell, R. Poola, J. Wang, and J. K. Schaller, “Quantitative measurements of diesel fuel spray characteristics in the near-nozzle region using X-ray absorption,” At. Sprays 11, 471–490 (2001).
[Crossref]
C. Badock, R. Wirth, A. Fath, and A. Leipertz, “Investigation of cavitation in real size diesel injection nozzles,” Int. J. Heat Fluid Flow 20, 538–544 (1999).
[Crossref]
L. Arnone, F. Beretta, A. Tregrossi, A. D’Alessio, and F. Ossler, “Ensemble and time resolved light scattering measurements in isothermal and burning heavy oil sprays,” Symp. Combust. 24, 1549–1555 (1992).
[Crossref]
G. A. Ruff, L. P. Bernal, and G. M. Faeth, “Structure of the near-injector region of nonevaporating pressure-atomized sprays,” J. Propuls. Power 7, 221–230 (1991).
[Crossref]
H. Herman, “Plasma spray deposition processes,” MRS Bull. 13, 60–67 (1988).
W. D. Bachalo and M. J. Houser, “Phase/Doppler spray analyzer for simultaneous measurements of drop size and velocity distributions,” Opt. Eng. 23, 583 (1984).
[Crossref]
N. Otsu, “A threshold selection method from gray-level histograms,” IEEE Trans. Syst. Man. Cybern. 9, 62–66 (1979).
[Crossref]
J. D. O’Keefe, W. W. Wrinkle, and C. N. Scully, “Supersonic liquid jets,” Nature 213, 23–25 (1967).
[Crossref]
M. Baumgartl, T. Gottschall, J. Abreu-Afonso, A. Díez, T. Meyer, B. Dietzek, M. Rothhardt, J. Popp, J. Limpert, and A. Tünnermann, “Alignment-free, all-spliced fiber laser source for CARS microscopy based on four-wave-mixing,” Opt. Express 20, 21010 (2012).
[Crossref]
[PubMed]
L. Arnone, F. Beretta, A. Tregrossi, A. D’Alessio, and F. Ossler, “Ensemble and time resolved light scattering measurements in isothermal and burning heavy oil sprays,” Symp. Combust. 24, 1549–1555 (1992).
[Crossref]
R. A. Tikhomirov, V. F. Babanin, E. N. Petukhov, I. D. Starikov, and V. A. Kovalev, High-pressure Jetcutting (Amer Society of Mechanical, 1992).
W. D. Bachalo and M. J. Houser, “Phase/Doppler spray analyzer for simultaneous measurements of drop size and velocity distributions,” Opt. Eng. 23, 583 (1984).
[Crossref]
C. Badock, R. Wirth, A. Fath, and A. Leipertz, “Investigation of cavitation in real size diesel injection nozzles,” Int. J. Heat Fluid Flow 20, 538–544 (1999).
[Crossref]
M. Baumgartl, T. Gottschall, J. Abreu-Afonso, A. Díez, T. Meyer, B. Dietzek, M. Rothhardt, J. Popp, J. Limpert, and A. Tünnermann, “Alignment-free, all-spliced fiber laser source for CARS microscopy based on four-wave-mixing,” Opt. Express 20, 21010 (2012).
[Crossref]
[PubMed]
C. Lecaplain, M. Baumgartl, T. Schreiber, and A. Hideur, “On the mode-locking mechanism of a dissipative-soliton fiber oscillator,” Opt. Express 19, 26742 (2011).
[Crossref]
L. Arnone, F. Beretta, A. Tregrossi, A. D’Alessio, and F. Ossler, “Ensemble and time resolved light scattering measurements in isothermal and burning heavy oil sprays,” Symp. Combust. 24, 1549–1555 (1992).
[Crossref]
T. Ménard, S. Idlahcen, J.-B. Blaisot, C. Rozé, A. Berlemont, T. Girasole, and L. Méès, “Numerical simulation of optical diagnostics and comparisons to experiments,” in “Int. Conf. Multiph. Flow,” (2010), pp. 1–7.
G. A. Ruff, L. P. Bernal, and G. M. Faeth, “Structure of the near-injector region of nonevaporating pressure-atomized sprays,” J. Propuls. Power 7, 221–230 (1991).
[Crossref]
D. Birch, C. McGuiness, K. Sagoo, and D. McLoskey, “A new sub-nanosecond LED at 280 nm: application to protein fluorescence,” Meas. Sci. Technol. 15, 19–22 (2004).
[Crossref]
H. Purwar, S. Idlahcen, C. Rozé, D. Sedarsky, and J.-B. Blaisot, “Collinear, two-color optical Kerr effect shutter for ultrafast time-resolved imaging,” Opt. Express 22, 15778–15790 (2014).
[Crossref]
[PubMed]
D. Sedarsky, S. Idlahcen, C. Rozé, and J.-B. Blaisot, “Velocity measurements in the near field of a diesel fuel injector by ultrafast imagery,” Exp. Fluids 54, 1451 (2013).
[Crossref]
T. Ménard, S. Idlahcen, J.-B. Blaisot, C. Rozé, A. Berlemont, T. Girasole, and L. Méès, “Numerical simulation of optical diagnostics and comparisons to experiments,” in “Int. Conf. Multiph. Flow,” (2010), pp. 1–7.
M. Linne, D. Sedarsky, T. Meyer, J. Gord, and C. Carter, “Ballistic imaging in the near-field of an effervescent spray,” Exp. Fluids 49, 911–923 (2010).
[Crossref]
D. Sedarsky, J. Gord, C. Carter, T. Meyer, and M. Linne, “Fast-framing ballistic imaging of velocity in an aerated spray,” Opt. Lett. 34, 2748 (2009).
[Crossref]
[PubMed]
C. Crua, M. R. Heikal, and M. R. Gold, “Microscopic imaging of the initial stage of diesel spray formation,” Fuel 157, 140–150 (2015).
[Crossref]
L. Arnone, F. Beretta, A. Tregrossi, A. D’Alessio, and F. Ossler, “Ensemble and time resolved light scattering measurements in isothermal and burning heavy oil sprays,” Symp. Combust. 24, 1549–1555 (1992).
[Crossref]
M. Baumgartl, T. Gottschall, J. Abreu-Afonso, A. Díez, T. Meyer, B. Dietzek, M. Rothhardt, J. Popp, J. Limpert, and A. Tünnermann, “Alignment-free, all-spliced fiber laser source for CARS microscopy based on four-wave-mixing,” Opt. Express 20, 21010 (2012).
[Crossref]
[PubMed]
M. Baumgartl, T. Gottschall, J. Abreu-Afonso, A. Díez, T. Meyer, B. Dietzek, M. Rothhardt, J. Popp, J. Limpert, and A. Tünnermann, “Alignment-free, all-spliced fiber laser source for CARS microscopy based on four-wave-mixing,” Opt. Express 20, 21010 (2012).
[Crossref]
[PubMed]
S. P. Duran, J. M. Porter, and T. E. Parker, “Ballistic imaging of diesel sprays using a picosecond laser: characterization and demonstration,” Appl. Opt. 54, 1743 (2015).
[Crossref]
S. P. Duran, J. M. Porter, and T. E. Parker, “Picosecond ballistic imaging of diesel injection in high-temperature and high-pressure air,” Exp. Fluids 56, 1–12 (2015).
[Crossref]
G. A. Ruff, L. P. Bernal, and G. M. Faeth, “Structure of the near-injector region of nonevaporating pressure-atomized sprays,” J. Propuls. Power 7, 221–230 (1991).
[Crossref]
C. Badock, R. Wirth, A. Fath, and A. Leipertz, “Investigation of cavitation in real size diesel injection nozzles,” Int. J. Heat Fluid Flow 20, 538–544 (1999).
[Crossref]
S. Moon, Y. Gao, J. Wang, K. Fezzaa, and T. Tsujimura, “Near-field dynamics of high-speed diesel sprays: Effects of orifice inlet geometry and injection pressure,” Fuel 133, 299–309 (2014).
[Crossref]
Y. Wang, X. Liu, K.-S. Im, W.-K. Lee, J. Wang, K. Fezzaa, D. L. S. Hung, and J. R. Winkelman, “Ultrafast X-ray study of dense-liquid-jet flow dynamics using structure-tracking velocimetry,” Nat. Phys. 4, 305–309 (2008).
[Crossref]
K.-S. Im, K. Fezzaa, Y. J. Wang, X. Liu, J. Wang, and M.-C. Lai, “Particle tracking velocimetry using fast x-ray phase-contrast imaging,” Appl. Phys. Lett. 90, 091919 (2007).
[Crossref]
C. Schaschke, I. Fletcher, and N. Glen, “Density and viscosity measurement of diesel fuels at combined high pressure and elevated temperature,” Processes 1, 30–48 (2013).
[Crossref]
C. Willert, S. Freitag, and C. Hassa, “High speed imaging of fuel spray using a low-cost illumination source,” in “ILASS 2008,” (Como Lake, Italy, 2008), September, pp. 8–10.
S. Moon, Y. Gao, S. Park, J. Wang, N. Kurimoto, and Y. Nishijima, “Effect of the number and position of nozzle holes on in- and near-nozzle dynamic characteristics of diesel injection,” Fuel 150, 112–122 (2015).
[Crossref]
S. Moon, Y. Gao, J. Wang, K. Fezzaa, and T. Tsujimura, “Near-field dynamics of high-speed diesel sprays: Effects of orifice inlet geometry and injection pressure,” Fuel 133, 299–309 (2014).
[Crossref]
T. Ménard, S. Idlahcen, J.-B. Blaisot, C. Rozé, A. Berlemont, T. Girasole, and L. Méès, “Numerical simulation of optical diagnostics and comparisons to experiments,” in “Int. Conf. Multiph. Flow,” (2010), pp. 1–7.
C. Schaschke, I. Fletcher, and N. Glen, “Density and viscosity measurement of diesel fuels at combined high pressure and elevated temperature,” Processes 1, 30–48 (2013).
[Crossref]
C. Crua, M. R. Heikal, and M. R. Gold, “Microscopic imaging of the initial stage of diesel spray formation,” Fuel 157, 140–150 (2015).
[Crossref]
M. Linne, D. Sedarsky, T. Meyer, J. Gord, and C. Carter, “Ballistic imaging in the near-field of an effervescent spray,” Exp. Fluids 49, 911–923 (2010).
[Crossref]
D. Sedarsky, J. Gord, C. Carter, T. Meyer, and M. Linne, “Fast-framing ballistic imaging of velocity in an aerated spray,” Opt. Lett. 34, 2748 (2009).
[Crossref]
[PubMed]
M. Baumgartl, T. Gottschall, J. Abreu-Afonso, A. Díez, T. Meyer, B. Dietzek, M. Rothhardt, J. Popp, J. Limpert, and A. Tünnermann, “Alignment-free, all-spliced fiber laser source for CARS microscopy based on four-wave-mixing,” Opt. Express 20, 21010 (2012).
[Crossref]
[PubMed]
M. Linne, M. Paciaroni, T. Hall, and T. Parker, “Ballistic imaging of the near field in a diesel spray,” Exp. Fluids 40, 836–846 (2006).
[Crossref]
C. Willert, S. Freitag, and C. Hassa, “High speed imaging of fuel spray using a low-cost illumination source,” in “ILASS 2008,” (Como Lake, Italy, 2008), September, pp. 8–10.
C. Crua, M. R. Heikal, and M. R. Gold, “Microscopic imaging of the initial stage of diesel spray formation,” Fuel 157, 140–150 (2015).
[Crossref]
H. Herman, “Plasma spray deposition processes,” MRS Bull. 13, 60–67 (1988).
W. D. Bachalo and M. J. Houser, “Phase/Doppler spray analyzer for simultaneous measurements of drop size and velocity distributions,” Opt. Eng. 23, 583 (1984).
[Crossref]
Y. Wang, X. Liu, K.-S. Im, W.-K. Lee, J. Wang, K. Fezzaa, D. L. S. Hung, and J. R. Winkelman, “Ultrafast X-ray study of dense-liquid-jet flow dynamics using structure-tracking velocimetry,” Nat. Phys. 4, 305–309 (2008).
[Crossref]
H. Purwar, S. Idlahcen, C. Rozé, D. Sedarsky, and J.-B. Blaisot, “Collinear, two-color optical Kerr effect shutter for ultrafast time-resolved imaging,” Opt. Express 22, 15778–15790 (2014).
[Crossref]
[PubMed]
D. Sedarsky, S. Idlahcen, C. Rozé, and J.-B. Blaisot, “Velocity measurements in the near field of a diesel fuel injector by ultrafast imagery,” Exp. Fluids 54, 1451 (2013).
[Crossref]
T. Ménard, S. Idlahcen, J.-B. Blaisot, C. Rozé, A. Berlemont, T. Girasole, and L. Méès, “Numerical simulation of optical diagnostics and comparisons to experiments,” in “Int. Conf. Multiph. Flow,” (2010), pp. 1–7.
Y. Wang, X. Liu, K.-S. Im, W.-K. Lee, J. Wang, K. Fezzaa, D. L. S. Hung, and J. R. Winkelman, “Ultrafast X-ray study of dense-liquid-jet flow dynamics using structure-tracking velocimetry,” Nat. Phys. 4, 305–309 (2008).
[Crossref]
K.-S. Im, K. Fezzaa, Y. J. Wang, X. Liu, J. Wang, and M.-C. Lai, “Particle tracking velocimetry using fast x-ray phase-contrast imaging,” Appl. Phys. Lett. 90, 091919 (2007).
[Crossref]
S. Moon, K. Komada, K. Sato, H. Yokohata, Y. Wada, and N. Yasuda, “Ultrafast X-ray study of multi-hole GDI injector sprays: Effects of nozzle hole length and number on initial spray formation,” Exp. Therm. Fluid Sci. 68, 68–81 (2015).
[Crossref]
R. A. Tikhomirov, V. F. Babanin, E. N. Petukhov, I. D. Starikov, and V. A. Kovalev, High-pressure Jetcutting (Amer Society of Mechanical, 1992).
K. K. Kuo, Recent Advances in Spray Combustion: Spray Atomization and Drop Burning Phenomena (American Institute of Aeronautics and Astronautics, 1996).
S. Moon, Y. Gao, S. Park, J. Wang, N. Kurimoto, and Y. Nishijima, “Effect of the number and position of nozzle holes on in- and near-nozzle dynamic characteristics of diesel injection,” Fuel 150, 112–122 (2015).
[Crossref]
K.-S. Im, K. Fezzaa, Y. J. Wang, X. Liu, J. Wang, and M.-C. Lai, “Particle tracking velocimetry using fast x-ray phase-contrast imaging,” Appl. Phys. Lett. 90, 091919 (2007).
[Crossref]
Y. Wang, X. Liu, K.-S. Im, W.-K. Lee, J. Wang, K. Fezzaa, D. L. S. Hung, and J. R. Winkelman, “Ultrafast X-ray study of dense-liquid-jet flow dynamics using structure-tracking velocimetry,” Nat. Phys. 4, 305–309 (2008).
[Crossref]
C. Badock, R. Wirth, A. Fath, and A. Leipertz, “Investigation of cavitation in real size diesel injection nozzles,” Int. J. Heat Fluid Flow 20, 538–544 (1999).
[Crossref]
M. Baumgartl, T. Gottschall, J. Abreu-Afonso, A. Díez, T. Meyer, B. Dietzek, M. Rothhardt, J. Popp, J. Limpert, and A. Tünnermann, “Alignment-free, all-spliced fiber laser source for CARS microscopy based on four-wave-mixing,” Opt. Express 20, 21010 (2012).
[Crossref]
[PubMed]
M. Linne, “Imaging in the optically dense regions of a spray: A review of developing techniques,” Prog. Energy Combust. Sci. 39, 403–440 (2013).
[Crossref]
M. Linne, “Analysis of X-ray phase contrast imaging in atomizing sprays,” Exp. Fluids 52, 1201–1218 (2012).
[Crossref]
M. Linne, D. Sedarsky, T. Meyer, J. Gord, and C. Carter, “Ballistic imaging in the near-field of an effervescent spray,” Exp. Fluids 49, 911–923 (2010).
[Crossref]
D. Sedarsky, J. Gord, C. Carter, T. Meyer, and M. Linne, “Fast-framing ballistic imaging of velocity in an aerated spray,” Opt. Lett. 34, 2748 (2009).
[Crossref]
[PubMed]
M. Linne, M. Paciaroni, T. Hall, and T. Parker, “Ballistic imaging of the near field in a diesel spray,” Exp. Fluids 40, 836–846 (2006).
[Crossref]
M. Paciaroni and M. Linne, “Single-shot, two-dimensional ballistic imaging through scattering media,” Appl. Opt. 43, 5100 (2004).
[Crossref]
[PubMed]
Y. Wang, X. Liu, K.-S. Im, W.-K. Lee, J. Wang, K. Fezzaa, D. L. S. Hung, and J. R. Winkelman, “Ultrafast X-ray study of dense-liquid-jet flow dynamics using structure-tracking velocimetry,” Nat. Phys. 4, 305–309 (2008).
[Crossref]
K.-S. Im, K. Fezzaa, Y. J. Wang, X. Liu, J. Wang, and M.-C. Lai, “Particle tracking velocimetry using fast x-ray phase-contrast imaging,” Appl. Phys. Lett. 90, 091919 (2007).
[Crossref]
A. G. MacPhee, “X-ray imaging of shock waves generated by high-pressure fuel sprays,” Science 295, 1261–1263 (2002).
[Crossref]
[PubMed]
D. Birch, C. McGuiness, K. Sagoo, and D. McLoskey, “A new sub-nanosecond LED at 280 nm: application to protein fluorescence,” Meas. Sci. Technol. 15, 19–22 (2004).
[Crossref]
D. Birch, C. McGuiness, K. Sagoo, and D. McLoskey, “A new sub-nanosecond LED at 280 nm: application to protein fluorescence,” Meas. Sci. Technol. 15, 19–22 (2004).
[Crossref]
T. Ménard, S. Idlahcen, J.-B. Blaisot, C. Rozé, A. Berlemont, T. Girasole, and L. Méès, “Numerical simulation of optical diagnostics and comparisons to experiments,” in “Int. Conf. Multiph. Flow,” (2010), pp. 1–7.
T. Ménard, S. Idlahcen, J.-B. Blaisot, C. Rozé, A. Berlemont, T. Girasole, and L. Méès, “Numerical simulation of optical diagnostics and comparisons to experiments,” in “Int. Conf. Multiph. Flow,” (2010), pp. 1–7.
M. Baumgartl, T. Gottschall, J. Abreu-Afonso, A. Díez, T. Meyer, B. Dietzek, M. Rothhardt, J. Popp, J. Limpert, and A. Tünnermann, “Alignment-free, all-spliced fiber laser source for CARS microscopy based on four-wave-mixing,” Opt. Express 20, 21010 (2012).
[Crossref]
[PubMed]
M. Linne, D. Sedarsky, T. Meyer, J. Gord, and C. Carter, “Ballistic imaging in the near-field of an effervescent spray,” Exp. Fluids 49, 911–923 (2010).
[Crossref]
D. Sedarsky, J. Gord, C. Carter, T. Meyer, and M. Linne, “Fast-framing ballistic imaging of velocity in an aerated spray,” Opt. Lett. 34, 2748 (2009).
[Crossref]
[PubMed]
S. Moon, Y. Gao, S. Park, J. Wang, N. Kurimoto, and Y. Nishijima, “Effect of the number and position of nozzle holes on in- and near-nozzle dynamic characteristics of diesel injection,” Fuel 150, 112–122 (2015).
[Crossref]
S. Moon, K. Komada, K. Sato, H. Yokohata, Y. Wada, and N. Yasuda, “Ultrafast X-ray study of multi-hole GDI injector sprays: Effects of nozzle hole length and number on initial spray formation,” Exp. Therm. Fluid Sci. 68, 68–81 (2015).
[Crossref]
S. Moon, Y. Gao, J. Wang, K. Fezzaa, and T. Tsujimura, “Near-field dynamics of high-speed diesel sprays: Effects of orifice inlet geometry and injection pressure,” Fuel 133, 299–309 (2014).
[Crossref]
S. Moon, Y. Gao, S. Park, J. Wang, N. Kurimoto, and Y. Nishijima, “Effect of the number and position of nozzle holes on in- and near-nozzle dynamic characteristics of diesel injection,” Fuel 150, 112–122 (2015).
[Crossref]
J. D. O’Keefe, W. W. Wrinkle, and C. N. Scully, “Supersonic liquid jets,” Nature 213, 23–25 (1967).
[Crossref]
L. Arnone, F. Beretta, A. Tregrossi, A. D’Alessio, and F. Ossler, “Ensemble and time resolved light scattering measurements in isothermal and burning heavy oil sprays,” Symp. Combust. 24, 1549–1555 (1992).
[Crossref]
N. Otsu, “A threshold selection method from gray-level histograms,” IEEE Trans. Syst. Man. Cybern. 9, 62–66 (1979).
[Crossref]
M. Linne, M. Paciaroni, T. Hall, and T. Parker, “Ballistic imaging of the near field in a diesel spray,” Exp. Fluids 40, 836–846 (2006).
[Crossref]
M. Paciaroni and M. Linne, “Single-shot, two-dimensional ballistic imaging through scattering media,” Appl. Opt. 43, 5100 (2004).
[Crossref]
[PubMed]
S. Moon, Y. Gao, S. Park, J. Wang, N. Kurimoto, and Y. Nishijima, “Effect of the number and position of nozzle holes on in- and near-nozzle dynamic characteristics of diesel injection,” Fuel 150, 112–122 (2015).
[Crossref]
M. Linne, M. Paciaroni, T. Hall, and T. Parker, “Ballistic imaging of the near field in a diesel spray,” Exp. Fluids 40, 836–846 (2006).
[Crossref]
S. P. Duran, J. M. Porter, and T. E. Parker, “Ballistic imaging of diesel sprays using a picosecond laser: characterization and demonstration,” Appl. Opt. 54, 1743 (2015).
[Crossref]
S. P. Duran, J. M. Porter, and T. E. Parker, “Picosecond ballistic imaging of diesel injection in high-temperature and high-pressure air,” Exp. Fluids 56, 1–12 (2015).
[Crossref]
R. A. Tikhomirov, V. F. Babanin, E. N. Petukhov, I. D. Starikov, and V. A. Kovalev, High-pressure Jetcutting (Amer Society of Mechanical, 1992).
Y. Yue, C. F. Powell, R. Poola, J. Wang, and J. K. Schaller, “Quantitative measurements of diesel fuel spray characteristics in the near-nozzle region using X-ray absorption,” At. Sprays 11, 471–490 (2001).
[Crossref]
M. Baumgartl, T. Gottschall, J. Abreu-Afonso, A. Díez, T. Meyer, B. Dietzek, M. Rothhardt, J. Popp, J. Limpert, and A. Tünnermann, “Alignment-free, all-spliced fiber laser source for CARS microscopy based on four-wave-mixing,” Opt. Express 20, 21010 (2012).
[Crossref]
[PubMed]
S. P. Duran, J. M. Porter, and T. E. Parker, “Ballistic imaging of diesel sprays using a picosecond laser: characterization and demonstration,” Appl. Opt. 54, 1743 (2015).
[Crossref]
S. P. Duran, J. M. Porter, and T. E. Parker, “Picosecond ballistic imaging of diesel injection in high-temperature and high-pressure air,” Exp. Fluids 56, 1–12 (2015).
[Crossref]
Y. Yue, C. F. Powell, R. Poola, J. Wang, and J. K. Schaller, “Quantitative measurements of diesel fuel spray characteristics in the near-nozzle region using X-ray absorption,” At. Sprays 11, 471–490 (2001).
[Crossref]
M. Baumgartl, T. Gottschall, J. Abreu-Afonso, A. Díez, T. Meyer, B. Dietzek, M. Rothhardt, J. Popp, J. Limpert, and A. Tünnermann, “Alignment-free, all-spliced fiber laser source for CARS microscopy based on four-wave-mixing,” Opt. Express 20, 21010 (2012).
[Crossref]
[PubMed]
H. Purwar, S. Idlahcen, C. Rozé, D. Sedarsky, and J.-B. Blaisot, “Collinear, two-color optical Kerr effect shutter for ultrafast time-resolved imaging,” Opt. Express 22, 15778–15790 (2014).
[Crossref]
[PubMed]
D. Sedarsky, S. Idlahcen, C. Rozé, and J.-B. Blaisot, “Velocity measurements in the near field of a diesel fuel injector by ultrafast imagery,” Exp. Fluids 54, 1451 (2013).
[Crossref]
T. Ménard, S. Idlahcen, J.-B. Blaisot, C. Rozé, A. Berlemont, T. Girasole, and L. Méès, “Numerical simulation of optical diagnostics and comparisons to experiments,” in “Int. Conf. Multiph. Flow,” (2010), pp. 1–7.
G. A. Ruff, L. P. Bernal, and G. M. Faeth, “Structure of the near-injector region of nonevaporating pressure-atomized sprays,” J. Propuls. Power 7, 221–230 (1991).
[Crossref]
D. Birch, C. McGuiness, K. Sagoo, and D. McLoskey, “A new sub-nanosecond LED at 280 nm: application to protein fluorescence,” Meas. Sci. Technol. 15, 19–22 (2004).
[Crossref]
S. Moon, K. Komada, K. Sato, H. Yokohata, Y. Wada, and N. Yasuda, “Ultrafast X-ray study of multi-hole GDI injector sprays: Effects of nozzle hole length and number on initial spray formation,” Exp. Therm. Fluid Sci. 68, 68–81 (2015).
[Crossref]
Y. Yue, C. F. Powell, R. Poola, J. Wang, and J. K. Schaller, “Quantitative measurements of diesel fuel spray characteristics in the near-nozzle region using X-ray absorption,” At. Sprays 11, 471–490 (2001).
[Crossref]
C. Schaschke, I. Fletcher, and N. Glen, “Density and viscosity measurement of diesel fuels at combined high pressure and elevated temperature,” Processes 1, 30–48 (2013).
[Crossref]
J. D. O’Keefe, W. W. Wrinkle, and C. N. Scully, “Supersonic liquid jets,” Nature 213, 23–25 (1967).
[Crossref]
H. Purwar, S. Idlahcen, C. Rozé, D. Sedarsky, and J.-B. Blaisot, “Collinear, two-color optical Kerr effect shutter for ultrafast time-resolved imaging,” Opt. Express 22, 15778–15790 (2014).
[Crossref]
[PubMed]
D. Sedarsky, S. Idlahcen, C. Rozé, and J.-B. Blaisot, “Velocity measurements in the near field of a diesel fuel injector by ultrafast imagery,” Exp. Fluids 54, 1451 (2013).
[Crossref]
M. Linne, D. Sedarsky, T. Meyer, J. Gord, and C. Carter, “Ballistic imaging in the near-field of an effervescent spray,” Exp. Fluids 49, 911–923 (2010).
[Crossref]
D. Sedarsky, J. Gord, C. Carter, T. Meyer, and M. Linne, “Fast-framing ballistic imaging of velocity in an aerated spray,” Opt. Lett. 34, 2748 (2009).
[Crossref]
[PubMed]
R. A. Tikhomirov, V. F. Babanin, E. N. Petukhov, I. D. Starikov, and V. A. Kovalev, High-pressure Jetcutting (Amer Society of Mechanical, 1992).
R. A. Tikhomirov, V. F. Babanin, E. N. Petukhov, I. D. Starikov, and V. A. Kovalev, High-pressure Jetcutting (Amer Society of Mechanical, 1992).
L. Arnone, F. Beretta, A. Tregrossi, A. D’Alessio, and F. Ossler, “Ensemble and time resolved light scattering measurements in isothermal and burning heavy oil sprays,” Symp. Combust. 24, 1549–1555 (1992).
[Crossref]
S. Moon, Y. Gao, J. Wang, K. Fezzaa, and T. Tsujimura, “Near-field dynamics of high-speed diesel sprays: Effects of orifice inlet geometry and injection pressure,” Fuel 133, 299–309 (2014).
[Crossref]
M. Baumgartl, T. Gottschall, J. Abreu-Afonso, A. Díez, T. Meyer, B. Dietzek, M. Rothhardt, J. Popp, J. Limpert, and A. Tünnermann, “Alignment-free, all-spliced fiber laser source for CARS microscopy based on four-wave-mixing,” Opt. Express 20, 21010 (2012).
[Crossref]
[PubMed]
S. Moon, K. Komada, K. Sato, H. Yokohata, Y. Wada, and N. Yasuda, “Ultrafast X-ray study of multi-hole GDI injector sprays: Effects of nozzle hole length and number on initial spray formation,” Exp. Therm. Fluid Sci. 68, 68–81 (2015).
[Crossref]
S. Moon, Y. Gao, S. Park, J. Wang, N. Kurimoto, and Y. Nishijima, “Effect of the number and position of nozzle holes on in- and near-nozzle dynamic characteristics of diesel injection,” Fuel 150, 112–122 (2015).
[Crossref]
S. Moon, Y. Gao, J. Wang, K. Fezzaa, and T. Tsujimura, “Near-field dynamics of high-speed diesel sprays: Effects of orifice inlet geometry and injection pressure,” Fuel 133, 299–309 (2014).
[Crossref]
Y. Wang, X. Liu, K.-S. Im, W.-K. Lee, J. Wang, K. Fezzaa, D. L. S. Hung, and J. R. Winkelman, “Ultrafast X-ray study of dense-liquid-jet flow dynamics using structure-tracking velocimetry,” Nat. Phys. 4, 305–309 (2008).
[Crossref]
K.-S. Im, K. Fezzaa, Y. J. Wang, X. Liu, J. Wang, and M.-C. Lai, “Particle tracking velocimetry using fast x-ray phase-contrast imaging,” Appl. Phys. Lett. 90, 091919 (2007).
[Crossref]
Y. Yue, C. F. Powell, R. Poola, J. Wang, and J. K. Schaller, “Quantitative measurements of diesel fuel spray characteristics in the near-nozzle region using X-ray absorption,” At. Sprays 11, 471–490 (2001).
[Crossref]
Y. Wang, X. Liu, K.-S. Im, W.-K. Lee, J. Wang, K. Fezzaa, D. L. S. Hung, and J. R. Winkelman, “Ultrafast X-ray study of dense-liquid-jet flow dynamics using structure-tracking velocimetry,” Nat. Phys. 4, 305–309 (2008).
[Crossref]
K.-S. Im, K. Fezzaa, Y. J. Wang, X. Liu, J. Wang, and M.-C. Lai, “Particle tracking velocimetry using fast x-ray phase-contrast imaging,” Appl. Phys. Lett. 90, 091919 (2007).
[Crossref]
C. Willert, S. Freitag, and C. Hassa, “High speed imaging of fuel spray using a low-cost illumination source,” in “ILASS 2008,” (Como Lake, Italy, 2008), September, pp. 8–10.
Y. Wang, X. Liu, K.-S. Im, W.-K. Lee, J. Wang, K. Fezzaa, D. L. S. Hung, and J. R. Winkelman, “Ultrafast X-ray study of dense-liquid-jet flow dynamics using structure-tracking velocimetry,” Nat. Phys. 4, 305–309 (2008).
[Crossref]
C. Badock, R. Wirth, A. Fath, and A. Leipertz, “Investigation of cavitation in real size diesel injection nozzles,” Int. J. Heat Fluid Flow 20, 538–544 (1999).
[Crossref]
J. D. O’Keefe, W. W. Wrinkle, and C. N. Scully, “Supersonic liquid jets,” Nature 213, 23–25 (1967).
[Crossref]
S. Moon, K. Komada, K. Sato, H. Yokohata, Y. Wada, and N. Yasuda, “Ultrafast X-ray study of multi-hole GDI injector sprays: Effects of nozzle hole length and number on initial spray formation,” Exp. Therm. Fluid Sci. 68, 68–81 (2015).
[Crossref]
S. Moon, K. Komada, K. Sato, H. Yokohata, Y. Wada, and N. Yasuda, “Ultrafast X-ray study of multi-hole GDI injector sprays: Effects of nozzle hole length and number on initial spray formation,” Exp. Therm. Fluid Sci. 68, 68–81 (2015).
[Crossref]
Y. Yue, C. F. Powell, R. Poola, J. Wang, and J. K. Schaller, “Quantitative measurements of diesel fuel spray characteristics in the near-nozzle region using X-ray absorption,” At. Sprays 11, 471–490 (2001).
[Crossref]
M. Paciaroni and M. Linne, “Single-shot, two-dimensional ballistic imaging through scattering media,” Appl. Opt. 43, 5100 (2004).
[Crossref]
[PubMed]
J. B. Schmidt, Z. D. Schaefer, T. R. Meyer, S. Roy, S. a. Danczyk, and J. R. Gord, “Ultrafast time-gated ballistic-photon imaging and shadowgraphy in optically dense rocket sprays,” Appl. Opt. 48, B137 (2009).
[Crossref]
[PubMed]
S. P. Duran, J. M. Porter, and T. E. Parker, “Ballistic imaging of diesel sprays using a picosecond laser: characterization and demonstration,” Appl. Opt. 54, 1743 (2015).
[Crossref]
K.-S. Im, K. Fezzaa, Y. J. Wang, X. Liu, J. Wang, and M.-C. Lai, “Particle tracking velocimetry using fast x-ray phase-contrast imaging,” Appl. Phys. Lett. 90, 091919 (2007).
[Crossref]
Y. Yue, C. F. Powell, R. Poola, J. Wang, and J. K. Schaller, “Quantitative measurements of diesel fuel spray characteristics in the near-nozzle region using X-ray absorption,” At. Sprays 11, 471–490 (2001).
[Crossref]
M. Linne, “Analysis of X-ray phase contrast imaging in atomizing sprays,” Exp. Fluids 52, 1201–1218 (2012).
[Crossref]
M. Linne, D. Sedarsky, T. Meyer, J. Gord, and C. Carter, “Ballistic imaging in the near-field of an effervescent spray,” Exp. Fluids 49, 911–923 (2010).
[Crossref]
S. P. Duran, J. M. Porter, and T. E. Parker, “Picosecond ballistic imaging of diesel injection in high-temperature and high-pressure air,” Exp. Fluids 56, 1–12 (2015).
[Crossref]
D. Sedarsky, S. Idlahcen, C. Rozé, and J.-B. Blaisot, “Velocity measurements in the near field of a diesel fuel injector by ultrafast imagery,” Exp. Fluids 54, 1451 (2013).
[Crossref]
M. Linne, M. Paciaroni, T. Hall, and T. Parker, “Ballistic imaging of the near field in a diesel spray,” Exp. Fluids 40, 836–846 (2006).
[Crossref]
S. Moon, K. Komada, K. Sato, H. Yokohata, Y. Wada, and N. Yasuda, “Ultrafast X-ray study of multi-hole GDI injector sprays: Effects of nozzle hole length and number on initial spray formation,” Exp. Therm. Fluid Sci. 68, 68–81 (2015).
[Crossref]
S. Moon, Y. Gao, S. Park, J. Wang, N. Kurimoto, and Y. Nishijima, “Effect of the number and position of nozzle holes on in- and near-nozzle dynamic characteristics of diesel injection,” Fuel 150, 112–122 (2015).
[Crossref]
C. Crua, M. R. Heikal, and M. R. Gold, “Microscopic imaging of the initial stage of diesel spray formation,” Fuel 157, 140–150 (2015).
[Crossref]
S. Moon, Y. Gao, J. Wang, K. Fezzaa, and T. Tsujimura, “Near-field dynamics of high-speed diesel sprays: Effects of orifice inlet geometry and injection pressure,” Fuel 133, 299–309 (2014).
[Crossref]
N. Otsu, “A threshold selection method from gray-level histograms,” IEEE Trans. Syst. Man. Cybern. 9, 62–66 (1979).
[Crossref]
C. Badock, R. Wirth, A. Fath, and A. Leipertz, “Investigation of cavitation in real size diesel injection nozzles,” Int. J. Heat Fluid Flow 20, 538–544 (1999).
[Crossref]
G. A. Ruff, L. P. Bernal, and G. M. Faeth, “Structure of the near-injector region of nonevaporating pressure-atomized sprays,” J. Propuls. Power 7, 221–230 (1991).
[Crossref]
D. Birch, C. McGuiness, K. Sagoo, and D. McLoskey, “A new sub-nanosecond LED at 280 nm: application to protein fluorescence,” Meas. Sci. Technol. 15, 19–22 (2004).
[Crossref]
H. Herman, “Plasma spray deposition processes,” MRS Bull. 13, 60–67 (1988).
Y. Wang, X. Liu, K.-S. Im, W.-K. Lee, J. Wang, K. Fezzaa, D. L. S. Hung, and J. R. Winkelman, “Ultrafast X-ray study of dense-liquid-jet flow dynamics using structure-tracking velocimetry,” Nat. Phys. 4, 305–309 (2008).
[Crossref]
J. D. O’Keefe, W. W. Wrinkle, and C. N. Scully, “Supersonic liquid jets,” Nature 213, 23–25 (1967).
[Crossref]
W. D. Bachalo and M. J. Houser, “Phase/Doppler spray analyzer for simultaneous measurements of drop size and velocity distributions,” Opt. Eng. 23, 583 (1984).
[Crossref]
C. Lecaplain, M. Baumgartl, T. Schreiber, and A. Hideur, “On the mode-locking mechanism of a dissipative-soliton fiber oscillator,” Opt. Express 19, 26742 (2011).
[Crossref]
M. Baumgartl, T. Gottschall, J. Abreu-Afonso, A. Díez, T. Meyer, B. Dietzek, M. Rothhardt, J. Popp, J. Limpert, and A. Tünnermann, “Alignment-free, all-spliced fiber laser source for CARS microscopy based on four-wave-mixing,” Opt. Express 20, 21010 (2012).
[Crossref]
[PubMed]
H. Purwar, S. Idlahcen, C. Rozé, D. Sedarsky, and J.-B. Blaisot, “Collinear, two-color optical Kerr effect shutter for ultrafast time-resolved imaging,” Opt. Express 22, 15778–15790 (2014).
[Crossref]
[PubMed]
C. Schaschke, I. Fletcher, and N. Glen, “Density and viscosity measurement of diesel fuels at combined high pressure and elevated temperature,” Processes 1, 30–48 (2013).
[Crossref]
M. Linne, “Imaging in the optically dense regions of a spray: A review of developing techniques,” Prog. Energy Combust. Sci. 39, 403–440 (2013).
[Crossref]
A. G. MacPhee, “X-ray imaging of shock waves generated by high-pressure fuel sprays,” Science 295, 1261–1263 (2002).
[Crossref]
[PubMed]
L. Arnone, F. Beretta, A. Tregrossi, A. D’Alessio, and F. Ossler, “Ensemble and time resolved light scattering measurements in isothermal and burning heavy oil sprays,” Symp. Combust. 24, 1549–1555 (1992).
[Crossref]
K. K. Kuo, Recent Advances in Spray Combustion: Spray Atomization and Drop Burning Phenomena (American Institute of Aeronautics and Astronautics, 1996).
R. A. Tikhomirov, V. F. Babanin, E. N. Petukhov, I. D. Starikov, and V. A. Kovalev, High-pressure Jetcutting (Amer Society of Mechanical, 1992).
T. Ménard, S. Idlahcen, J.-B. Blaisot, C. Rozé, A. Berlemont, T. Girasole, and L. Méès, “Numerical simulation of optical diagnostics and comparisons to experiments,” in “Int. Conf. Multiph. Flow,” (2010), pp. 1–7.
C. Willert, S. Freitag, and C. Hassa, “High speed imaging of fuel spray using a low-cost illumination source,” in “ILASS 2008,” (Como Lake, Italy, 2008), September, pp. 8–10.
Share with Facebook
Tweet This
Post on reddit
Share with LinkedIn
Add to CiteULike
Add to Mendeley
Add to BibSonomy
