Abstract

This paper briefly describes an optical device for combined measurement of the diameter of heated long cylindrical items and components, such as metal wire, optical fiber, and chemical fiber, using a diffraction method, as well as determining their surface temperature based on the radiance of thermal radiation. The main advantage of the proposed method is that it can monitor the parameters of the heated item, even in an out-of-focus image. An approach based on image processing methods is also proposed to improve the measurement methods.

© 2019 Optical Society of America

Towards high-sensitivity and high-accuracy forward Brillouin scattering-based optomechanical temperature sensing in thin-diameter fibers

Liang Zhang, Han Wang, Yichun Li, Song Gao, Mengshi Zhu, Heming Wei, Fufei Pang, and Tingyun Wang
Opt. Express 32(1) 586-598 (2024)

Discrimination between strain and temperature by cascading single-mode thin-core diameter fibers

Jie Shi, Shilin Xiao, Miehua Bi, Lilin Yi, and Pei Yang
Appl. Opt. 51(14) 2733-2738 (2012)

X-ray tomography of extended objects: a comparison of data acquisition approaches

Ming Du, Rafael Vescovi, Kamel Fezzaa, Chris Jacobsen, and Doğa Gürsoy
J. Opt. Soc. Am. A 35(11) 1871-1879 (2018)

Analytical approach to the impact of polarization aberration on lithographic imaging

Yuanying Tu, Xiangzhao Wang, Sikun Li, and Yuting Cao
Opt. Lett. 37(11) 2061-2063 (2012)

Imaging extended objects with a Fresnel-zone-plate aperture

R. M. Henkelman and M. J. Bronskill
J. Opt. Soc. Am. 64(2) 134-137 (1974)