Abstract

This paper discusses how the design features of anisotropic single-mode quartz fiber lightguides with an elliptical boron-germanosilicate stress cladding affect the birefringence. It is found that, as the ellipticity of the stress cladding and the drawing temperature increase, the contribution of the hydrostatic mechanism to the anisotropy of the stressed state of the core increases.

© 2012 OSA

PDF Article

References

  • View by:
  • |
  • |
  • |

  1. A. Ourmazd, P. Malkolm, M. P. Varnham, R. D. Birch, and D. N. Payne, “Thermal properties of highly birefringent optical fibers and preforms,” Appl. Opt. 22, 2374 (1983).
    [CrossRef]
  2. M. A. Eron’yan, A. V. Komarov, Yu. N. Kondrat’ev, E. I. Romashova, M. M. Serkov, and A. V. Khokhlov, “Thin anisotropic single-mode fiber lightguides with elliptical stressing coating,” Opt. Zh. 67, No. 10, 104 (2000).
  3. S. V. Bureev, K. V. Dukel’ski?, M. A. Eron’yan, P. A. Zlobin, A. V. Komarov, L. G. Levit, V. I. Strakhov, and A. V. Khokhlov, “Processing large blanks of anisotropic single-mode lightguides with elliptical cladding,” Opt. Zh. 74, No. 4, 85 (2007). [J. Opt. Technol. 74, 297 (2007)].
  4. M. P. Varnham, D. N. Payne, A. J. Barlow, and R. D. Birch, “Analytic solution for the birefringence produced by thermal stress in polarization-maintaining optical fibers,” J. Lightwave Technol. LT-1, 332 (1983).
    [CrossRef]

2007 (1)

S. V. Bureev, K. V. Dukel’ski?, M. A. Eron’yan, P. A. Zlobin, A. V. Komarov, L. G. Levit, V. I. Strakhov, and A. V. Khokhlov, “Processing large blanks of anisotropic single-mode lightguides with elliptical cladding,” Opt. Zh. 74, No. 4, 85 (2007). [J. Opt. Technol. 74, 297 (2007)].

2000 (1)

M. A. Eron’yan, A. V. Komarov, Yu. N. Kondrat’ev, E. I. Romashova, M. M. Serkov, and A. V. Khokhlov, “Thin anisotropic single-mode fiber lightguides with elliptical stressing coating,” Opt. Zh. 67, No. 10, 104 (2000).

1983 (2)

M. P. Varnham, D. N. Payne, A. J. Barlow, and R. D. Birch, “Analytic solution for the birefringence produced by thermal stress in polarization-maintaining optical fibers,” J. Lightwave Technol. LT-1, 332 (1983).
[CrossRef]

A. Ourmazd, P. Malkolm, M. P. Varnham, R. D. Birch, and D. N. Payne, “Thermal properties of highly birefringent optical fibers and preforms,” Appl. Opt. 22, 2374 (1983).
[CrossRef]

Barlow, A. J.

M. P. Varnham, D. N. Payne, A. J. Barlow, and R. D. Birch, “Analytic solution for the birefringence produced by thermal stress in polarization-maintaining optical fibers,” J. Lightwave Technol. LT-1, 332 (1983).
[CrossRef]

Birch, R. D.

M. P. Varnham, D. N. Payne, A. J. Barlow, and R. D. Birch, “Analytic solution for the birefringence produced by thermal stress in polarization-maintaining optical fibers,” J. Lightwave Technol. LT-1, 332 (1983).
[CrossRef]

A. Ourmazd, P. Malkolm, M. P. Varnham, R. D. Birch, and D. N. Payne, “Thermal properties of highly birefringent optical fibers and preforms,” Appl. Opt. 22, 2374 (1983).
[CrossRef]

Bureev, S. V.

S. V. Bureev, K. V. Dukel’ski?, M. A. Eron’yan, P. A. Zlobin, A. V. Komarov, L. G. Levit, V. I. Strakhov, and A. V. Khokhlov, “Processing large blanks of anisotropic single-mode lightguides with elliptical cladding,” Opt. Zh. 74, No. 4, 85 (2007). [J. Opt. Technol. 74, 297 (2007)].

Dukel’skii, K. V.

S. V. Bureev, K. V. Dukel’ski?, M. A. Eron’yan, P. A. Zlobin, A. V. Komarov, L. G. Levit, V. I. Strakhov, and A. V. Khokhlov, “Processing large blanks of anisotropic single-mode lightguides with elliptical cladding,” Opt. Zh. 74, No. 4, 85 (2007). [J. Opt. Technol. 74, 297 (2007)].

Eron’yan, M. A.

S. V. Bureev, K. V. Dukel’ski?, M. A. Eron’yan, P. A. Zlobin, A. V. Komarov, L. G. Levit, V. I. Strakhov, and A. V. Khokhlov, “Processing large blanks of anisotropic single-mode lightguides with elliptical cladding,” Opt. Zh. 74, No. 4, 85 (2007). [J. Opt. Technol. 74, 297 (2007)].

M. A. Eron’yan, A. V. Komarov, Yu. N. Kondrat’ev, E. I. Romashova, M. M. Serkov, and A. V. Khokhlov, “Thin anisotropic single-mode fiber lightguides with elliptical stressing coating,” Opt. Zh. 67, No. 10, 104 (2000).

Khokhlov, A. V.

S. V. Bureev, K. V. Dukel’ski?, M. A. Eron’yan, P. A. Zlobin, A. V. Komarov, L. G. Levit, V. I. Strakhov, and A. V. Khokhlov, “Processing large blanks of anisotropic single-mode lightguides with elliptical cladding,” Opt. Zh. 74, No. 4, 85 (2007). [J. Opt. Technol. 74, 297 (2007)].

M. A. Eron’yan, A. V. Komarov, Yu. N. Kondrat’ev, E. I. Romashova, M. M. Serkov, and A. V. Khokhlov, “Thin anisotropic single-mode fiber lightguides with elliptical stressing coating,” Opt. Zh. 67, No. 10, 104 (2000).

Komarov, A. V.

S. V. Bureev, K. V. Dukel’ski?, M. A. Eron’yan, P. A. Zlobin, A. V. Komarov, L. G. Levit, V. I. Strakhov, and A. V. Khokhlov, “Processing large blanks of anisotropic single-mode lightguides with elliptical cladding,” Opt. Zh. 74, No. 4, 85 (2007). [J. Opt. Technol. 74, 297 (2007)].

M. A. Eron’yan, A. V. Komarov, Yu. N. Kondrat’ev, E. I. Romashova, M. M. Serkov, and A. V. Khokhlov, “Thin anisotropic single-mode fiber lightguides with elliptical stressing coating,” Opt. Zh. 67, No. 10, 104 (2000).

Kondrat’ev, Yu. N.

M. A. Eron’yan, A. V. Komarov, Yu. N. Kondrat’ev, E. I. Romashova, M. M. Serkov, and A. V. Khokhlov, “Thin anisotropic single-mode fiber lightguides with elliptical stressing coating,” Opt. Zh. 67, No. 10, 104 (2000).

Levit, L. G.

S. V. Bureev, K. V. Dukel’ski?, M. A. Eron’yan, P. A. Zlobin, A. V. Komarov, L. G. Levit, V. I. Strakhov, and A. V. Khokhlov, “Processing large blanks of anisotropic single-mode lightguides with elliptical cladding,” Opt. Zh. 74, No. 4, 85 (2007). [J. Opt. Technol. 74, 297 (2007)].

Malkolm, P.

Ourmazd, A.

Payne, D. N.

M. P. Varnham, D. N. Payne, A. J. Barlow, and R. D. Birch, “Analytic solution for the birefringence produced by thermal stress in polarization-maintaining optical fibers,” J. Lightwave Technol. LT-1, 332 (1983).
[CrossRef]

A. Ourmazd, P. Malkolm, M. P. Varnham, R. D. Birch, and D. N. Payne, “Thermal properties of highly birefringent optical fibers and preforms,” Appl. Opt. 22, 2374 (1983).
[CrossRef]

Romashova, E. I.

M. A. Eron’yan, A. V. Komarov, Yu. N. Kondrat’ev, E. I. Romashova, M. M. Serkov, and A. V. Khokhlov, “Thin anisotropic single-mode fiber lightguides with elliptical stressing coating,” Opt. Zh. 67, No. 10, 104 (2000).

Serkov, M. M.

M. A. Eron’yan, A. V. Komarov, Yu. N. Kondrat’ev, E. I. Romashova, M. M. Serkov, and A. V. Khokhlov, “Thin anisotropic single-mode fiber lightguides with elliptical stressing coating,” Opt. Zh. 67, No. 10, 104 (2000).

Strakhov, V. I.

S. V. Bureev, K. V. Dukel’ski?, M. A. Eron’yan, P. A. Zlobin, A. V. Komarov, L. G. Levit, V. I. Strakhov, and A. V. Khokhlov, “Processing large blanks of anisotropic single-mode lightguides with elliptical cladding,” Opt. Zh. 74, No. 4, 85 (2007). [J. Opt. Technol. 74, 297 (2007)].

Varnham, M. P.

M. P. Varnham, D. N. Payne, A. J. Barlow, and R. D. Birch, “Analytic solution for the birefringence produced by thermal stress in polarization-maintaining optical fibers,” J. Lightwave Technol. LT-1, 332 (1983).
[CrossRef]

A. Ourmazd, P. Malkolm, M. P. Varnham, R. D. Birch, and D. N. Payne, “Thermal properties of highly birefringent optical fibers and preforms,” Appl. Opt. 22, 2374 (1983).
[CrossRef]

Zlobin, P. A.

S. V. Bureev, K. V. Dukel’ski?, M. A. Eron’yan, P. A. Zlobin, A. V. Komarov, L. G. Levit, V. I. Strakhov, and A. V. Khokhlov, “Processing large blanks of anisotropic single-mode lightguides with elliptical cladding,” Opt. Zh. 74, No. 4, 85 (2007). [J. Opt. Technol. 74, 297 (2007)].

Appl. Opt. (1)

J. Lightwave Technol. (1)

M. P. Varnham, D. N. Payne, A. J. Barlow, and R. D. Birch, “Analytic solution for the birefringence produced by thermal stress in polarization-maintaining optical fibers,” J. Lightwave Technol. LT-1, 332 (1983).
[CrossRef]

Opt. Zh. (2)

M. A. Eron’yan, A. V. Komarov, Yu. N. Kondrat’ev, E. I. Romashova, M. M. Serkov, and A. V. Khokhlov, “Thin anisotropic single-mode fiber lightguides with elliptical stressing coating,” Opt. Zh. 67, No. 10, 104 (2000).

S. V. Bureev, K. V. Dukel’ski?, M. A. Eron’yan, P. A. Zlobin, A. V. Komarov, L. G. Levit, V. I. Strakhov, and A. V. Khokhlov, “Processing large blanks of anisotropic single-mode lightguides with elliptical cladding,” Opt. Zh. 74, No. 4, 85 (2007). [J. Opt. Technol. 74, 297 (2007)].

Cited By

OSA participates in CrossRef's Cited-By Linking service. Citing articles from OSA journals and other participating publishers are listed here.

Alert me when this article is cited.