Abstract

This paper describes a technique for the volume scanning of sections of the human body, on the example of the arms of a man and woman, using devices of manual and stationary type. An algorithm is presented for processing the data obtained on the basis of scanning.

© 2012 OSA

PDF Article

References

  • View by:
  • |
  • |
  • |

  1. Digital hand family based on hand anthropometry, Digital Human Research Center, AIST [Electronic resource]. Address: http://www.dh.aist.go.jp/en/research/centered/2004HandDim/.
  2. T. M. Greiner, “Hand anthropometry of US Army personnel,” U.S. Army Natick Research, Development and Engineering Center, Natick: MA, No. 5, 98 (1991).
  3. M. S. Rogers, A. B. Barr, B. Kasemsontitum, and D. M. Rempel, “A three-dimensional anthropometric solid model of the hand based on landmark measurements,” Ergonomics 51, 511 (2008).
    [CrossRef] [PubMed]
  4. D. Hidson, “Development of a standard anthropometric dimension set for use in computer-aided glove design,” DREO Technical Note 91–22, Defense Research Establishment OTTAWA, No. 56, 51 (1991).
  5. S. W. Lee and X. Zhang, “Development and evaluation of an optimization-based model for power-grip posture prediction,” J. Biomech. 38, 1591 (2005).
    [CrossRef] [PubMed]
  6. L. Wonsup, Y. Sunghye, and Y. Heecheon, “Development of a 3D semi-automatic measurement protocol for hand anthropometric measurement,” in Proceedings of the Human Factors and Ergonomics Society 54th Annual Meeting, Vol. 54, (2008), p. 1672.
  7. F. Remondino and A. Roditakis, “Human motion reconstruction and animation from video sequences,” in Proceedings of the International Conference on Computer Vision, Vol. 5, (2007), pp. 180–188.
  8. F. Remondino, “3D reconstruction of static human body with a digital camera,” Proc. SPIE 5013, 38 (2003).
    [CrossRef]
  9. “Noncontact laser scanning,” Corporation Amethyst: 3D scanning and modelling. URL: http://www.ametist.com/3d/ (access date 7/22/2011).
  10. “Handyscan 3D scanners,” Creaform: 3D scanners. URL: http://www.creaform3d.com/en/handyscan3d/products/default.aspx?v=a (access date 7/18/2011).
  11. “Non-contact 3D digitizer,” Konica Minolta: 3D Measurement. URL: http://www.konicaminolta.eu/measuring-instruments/products/3d-measurement.html (access date 7/28/2011).
  12. V. O. Tishkin and A. N. Vershinin, “Quality of the electronic replicas of physical objects,” Nauch. Tekh. Vest. Prikl. Info. Tekhnol. No. 52, 69 (2008).
  13. V. O. Tishkin and O. V. Cherepanova, “Three-dimensional scanning and modelling,” Nauch. Tekh. Vest. Sovrem. Fiz. Trudy Mol. Uchenykh No. 37, 45 (2007).
  14. V. O. Tishkin, “Technique for collecting and processing data obtained during 3D scanning,” Nauch. Tekh. Vest. SPBGUITMO No. 71, 87 (2011).
  15. H. Han and Y. Nam, “The suitability of 3-dimensional body scan method in measuring body surface area,” Text. Sci. Eng. 41, No. 3, 223 (2004).
  16. Z. Li, C. C. Chang, P. G. Dempsey, L. Ouyang, and J. Duan, “Validation of a three-dimensional hand-scanning and dimension-extraction method with dimension data,” Ergonomics 51, 1780 (2010).
  17. X. Ju, N. Werghi, and J. P. Siebert, “Automatic segmentation of 3D human body scans,” in International Conference on Computer Graphics and Imaging, Vol. 12, (2000), p. 239.
  18. C. C. Chang, Z. Li, X. Cai, and P. Dempsey, “Error control and calibration in three-dimensional anthropometric measurement of the hand by laser scanning with glass support,” Measurement 40, No. 1, 21 (2007).
    [CrossRef]

2011

V. O. Tishkin, “Technique for collecting and processing data obtained during 3D scanning,” Nauch. Tekh. Vest. SPBGUITMO No. 71, 87 (2011).

2010

Z. Li, C. C. Chang, P. G. Dempsey, L. Ouyang, and J. Duan, “Validation of a three-dimensional hand-scanning and dimension-extraction method with dimension data,” Ergonomics 51, 1780 (2010).

2008

M. S. Rogers, A. B. Barr, B. Kasemsontitum, and D. M. Rempel, “A three-dimensional anthropometric solid model of the hand based on landmark measurements,” Ergonomics 51, 511 (2008).
[CrossRef] [PubMed]

V. O. Tishkin and A. N. Vershinin, “Quality of the electronic replicas of physical objects,” Nauch. Tekh. Vest. Prikl. Info. Tekhnol. No. 52, 69 (2008).

2007

V. O. Tishkin and O. V. Cherepanova, “Three-dimensional scanning and modelling,” Nauch. Tekh. Vest. Sovrem. Fiz. Trudy Mol. Uchenykh No. 37, 45 (2007).

C. C. Chang, Z. Li, X. Cai, and P. Dempsey, “Error control and calibration in three-dimensional anthropometric measurement of the hand by laser scanning with glass support,” Measurement 40, No. 1, 21 (2007).
[CrossRef]

2005

S. W. Lee and X. Zhang, “Development and evaluation of an optimization-based model for power-grip posture prediction,” J. Biomech. 38, 1591 (2005).
[CrossRef] [PubMed]

2004

H. Han and Y. Nam, “The suitability of 3-dimensional body scan method in measuring body surface area,” Text. Sci. Eng. 41, No. 3, 223 (2004).

2003

F. Remondino, “3D reconstruction of static human body with a digital camera,” Proc. SPIE 5013, 38 (2003).
[CrossRef]

Barr, A. B.

M. S. Rogers, A. B. Barr, B. Kasemsontitum, and D. M. Rempel, “A three-dimensional anthropometric solid model of the hand based on landmark measurements,” Ergonomics 51, 511 (2008).
[CrossRef] [PubMed]

Cai, X.

C. C. Chang, Z. Li, X. Cai, and P. Dempsey, “Error control and calibration in three-dimensional anthropometric measurement of the hand by laser scanning with glass support,” Measurement 40, No. 1, 21 (2007).
[CrossRef]

Chang, C. C.

Z. Li, C. C. Chang, P. G. Dempsey, L. Ouyang, and J. Duan, “Validation of a three-dimensional hand-scanning and dimension-extraction method with dimension data,” Ergonomics 51, 1780 (2010).

C. C. Chang, Z. Li, X. Cai, and P. Dempsey, “Error control and calibration in three-dimensional anthropometric measurement of the hand by laser scanning with glass support,” Measurement 40, No. 1, 21 (2007).
[CrossRef]

Cherepanova, O. V.

V. O. Tishkin and O. V. Cherepanova, “Three-dimensional scanning and modelling,” Nauch. Tekh. Vest. Sovrem. Fiz. Trudy Mol. Uchenykh No. 37, 45 (2007).

Dempsey, P.

C. C. Chang, Z. Li, X. Cai, and P. Dempsey, “Error control and calibration in three-dimensional anthropometric measurement of the hand by laser scanning with glass support,” Measurement 40, No. 1, 21 (2007).
[CrossRef]

Dempsey, P. G.

Z. Li, C. C. Chang, P. G. Dempsey, L. Ouyang, and J. Duan, “Validation of a three-dimensional hand-scanning and dimension-extraction method with dimension data,” Ergonomics 51, 1780 (2010).

Duan, J.

Z. Li, C. C. Chang, P. G. Dempsey, L. Ouyang, and J. Duan, “Validation of a three-dimensional hand-scanning and dimension-extraction method with dimension data,” Ergonomics 51, 1780 (2010).

Greiner, T. M.

T. M. Greiner, “Hand anthropometry of US Army personnel,” U.S. Army Natick Research, Development and Engineering Center, Natick: MA, No. 5, 98 (1991).

Han, H.

H. Han and Y. Nam, “The suitability of 3-dimensional body scan method in measuring body surface area,” Text. Sci. Eng. 41, No. 3, 223 (2004).

Heecheon, Y.

L. Wonsup, Y. Sunghye, and Y. Heecheon, “Development of a 3D semi-automatic measurement protocol for hand anthropometric measurement,” in Proceedings of the Human Factors and Ergonomics Society 54th Annual Meeting, Vol. 54, (2008), p. 1672.

Hidson, D.

D. Hidson, “Development of a standard anthropometric dimension set for use in computer-aided glove design,” DREO Technical Note 91–22, Defense Research Establishment OTTAWA, No. 56, 51 (1991).

Ju, X.

X. Ju, N. Werghi, and J. P. Siebert, “Automatic segmentation of 3D human body scans,” in International Conference on Computer Graphics and Imaging, Vol. 12, (2000), p. 239.

Kasemsontitum, B.

M. S. Rogers, A. B. Barr, B. Kasemsontitum, and D. M. Rempel, “A three-dimensional anthropometric solid model of the hand based on landmark measurements,” Ergonomics 51, 511 (2008).
[CrossRef] [PubMed]

Lee, S. W.

S. W. Lee and X. Zhang, “Development and evaluation of an optimization-based model for power-grip posture prediction,” J. Biomech. 38, 1591 (2005).
[CrossRef] [PubMed]

Li, Z.

Z. Li, C. C. Chang, P. G. Dempsey, L. Ouyang, and J. Duan, “Validation of a three-dimensional hand-scanning and dimension-extraction method with dimension data,” Ergonomics 51, 1780 (2010).

C. C. Chang, Z. Li, X. Cai, and P. Dempsey, “Error control and calibration in three-dimensional anthropometric measurement of the hand by laser scanning with glass support,” Measurement 40, No. 1, 21 (2007).
[CrossRef]

Nam, Y.

H. Han and Y. Nam, “The suitability of 3-dimensional body scan method in measuring body surface area,” Text. Sci. Eng. 41, No. 3, 223 (2004).

Ouyang, L.

Z. Li, C. C. Chang, P. G. Dempsey, L. Ouyang, and J. Duan, “Validation of a three-dimensional hand-scanning and dimension-extraction method with dimension data,” Ergonomics 51, 1780 (2010).

Remondino, F.

F. Remondino, “3D reconstruction of static human body with a digital camera,” Proc. SPIE 5013, 38 (2003).
[CrossRef]

F. Remondino and A. Roditakis, “Human motion reconstruction and animation from video sequences,” in Proceedings of the International Conference on Computer Vision, Vol. 5, (2007), pp. 180–188.

Rempel, D. M.

M. S. Rogers, A. B. Barr, B. Kasemsontitum, and D. M. Rempel, “A three-dimensional anthropometric solid model of the hand based on landmark measurements,” Ergonomics 51, 511 (2008).
[CrossRef] [PubMed]

Roditakis, A.

F. Remondino and A. Roditakis, “Human motion reconstruction and animation from video sequences,” in Proceedings of the International Conference on Computer Vision, Vol. 5, (2007), pp. 180–188.

Rogers, M. S.

M. S. Rogers, A. B. Barr, B. Kasemsontitum, and D. M. Rempel, “A three-dimensional anthropometric solid model of the hand based on landmark measurements,” Ergonomics 51, 511 (2008).
[CrossRef] [PubMed]

Siebert, J. P.

X. Ju, N. Werghi, and J. P. Siebert, “Automatic segmentation of 3D human body scans,” in International Conference on Computer Graphics and Imaging, Vol. 12, (2000), p. 239.

Sunghye, Y.

L. Wonsup, Y. Sunghye, and Y. Heecheon, “Development of a 3D semi-automatic measurement protocol for hand anthropometric measurement,” in Proceedings of the Human Factors and Ergonomics Society 54th Annual Meeting, Vol. 54, (2008), p. 1672.

Tishkin, V. O.

V. O. Tishkin, “Technique for collecting and processing data obtained during 3D scanning,” Nauch. Tekh. Vest. SPBGUITMO No. 71, 87 (2011).

V. O. Tishkin and A. N. Vershinin, “Quality of the electronic replicas of physical objects,” Nauch. Tekh. Vest. Prikl. Info. Tekhnol. No. 52, 69 (2008).

V. O. Tishkin and O. V. Cherepanova, “Three-dimensional scanning and modelling,” Nauch. Tekh. Vest. Sovrem. Fiz. Trudy Mol. Uchenykh No. 37, 45 (2007).

Vershinin, A. N.

V. O. Tishkin and A. N. Vershinin, “Quality of the electronic replicas of physical objects,” Nauch. Tekh. Vest. Prikl. Info. Tekhnol. No. 52, 69 (2008).

Werghi, N.

X. Ju, N. Werghi, and J. P. Siebert, “Automatic segmentation of 3D human body scans,” in International Conference on Computer Graphics and Imaging, Vol. 12, (2000), p. 239.

Wonsup, L.

L. Wonsup, Y. Sunghye, and Y. Heecheon, “Development of a 3D semi-automatic measurement protocol for hand anthropometric measurement,” in Proceedings of the Human Factors and Ergonomics Society 54th Annual Meeting, Vol. 54, (2008), p. 1672.

Zhang, X.

S. W. Lee and X. Zhang, “Development and evaluation of an optimization-based model for power-grip posture prediction,” J. Biomech. 38, 1591 (2005).
[CrossRef] [PubMed]

Ergonomics

M. S. Rogers, A. B. Barr, B. Kasemsontitum, and D. M. Rempel, “A three-dimensional anthropometric solid model of the hand based on landmark measurements,” Ergonomics 51, 511 (2008).
[CrossRef] [PubMed]

Z. Li, C. C. Chang, P. G. Dempsey, L. Ouyang, and J. Duan, “Validation of a three-dimensional hand-scanning and dimension-extraction method with dimension data,” Ergonomics 51, 1780 (2010).

J. Biomech.

S. W. Lee and X. Zhang, “Development and evaluation of an optimization-based model for power-grip posture prediction,” J. Biomech. 38, 1591 (2005).
[CrossRef] [PubMed]

Measurement

C. C. Chang, Z. Li, X. Cai, and P. Dempsey, “Error control and calibration in three-dimensional anthropometric measurement of the hand by laser scanning with glass support,” Measurement 40, No. 1, 21 (2007).
[CrossRef]

Nauch. Tekh. Vest. Prikl. Info. Tekhnol.

V. O. Tishkin and A. N. Vershinin, “Quality of the electronic replicas of physical objects,” Nauch. Tekh. Vest. Prikl. Info. Tekhnol. No. 52, 69 (2008).

Nauch. Tekh. Vest. Sovrem. Fiz. Trudy Mol. Uchenykh

V. O. Tishkin and O. V. Cherepanova, “Three-dimensional scanning and modelling,” Nauch. Tekh. Vest. Sovrem. Fiz. Trudy Mol. Uchenykh No. 37, 45 (2007).

Nauch. Tekh. Vest. SPBGUITMO

V. O. Tishkin, “Technique for collecting and processing data obtained during 3D scanning,” Nauch. Tekh. Vest. SPBGUITMO No. 71, 87 (2011).

Proc. SPIE

F. Remondino, “3D reconstruction of static human body with a digital camera,” Proc. SPIE 5013, 38 (2003).
[CrossRef]

Text. Sci. Eng.

H. Han and Y. Nam, “The suitability of 3-dimensional body scan method in measuring body surface area,” Text. Sci. Eng. 41, No. 3, 223 (2004).

Other

L. Wonsup, Y. Sunghye, and Y. Heecheon, “Development of a 3D semi-automatic measurement protocol for hand anthropometric measurement,” in Proceedings of the Human Factors and Ergonomics Society 54th Annual Meeting, Vol. 54, (2008), p. 1672.

F. Remondino and A. Roditakis, “Human motion reconstruction and animation from video sequences,” in Proceedings of the International Conference on Computer Vision, Vol. 5, (2007), pp. 180–188.

X. Ju, N. Werghi, and J. P. Siebert, “Automatic segmentation of 3D human body scans,” in International Conference on Computer Graphics and Imaging, Vol. 12, (2000), p. 239.

“Noncontact laser scanning,” Corporation Amethyst: 3D scanning and modelling. URL: http://www.ametist.com/3d/ (access date 7/22/2011).

“Handyscan 3D scanners,” Creaform: 3D scanners. URL: http://www.creaform3d.com/en/handyscan3d/products/default.aspx?v=a (access date 7/18/2011).

“Non-contact 3D digitizer,” Konica Minolta: 3D Measurement. URL: http://www.konicaminolta.eu/measuring-instruments/products/3d-measurement.html (access date 7/28/2011).

D. Hidson, “Development of a standard anthropometric dimension set for use in computer-aided glove design,” DREO Technical Note 91–22, Defense Research Establishment OTTAWA, No. 56, 51 (1991).

Digital hand family based on hand anthropometry, Digital Human Research Center, AIST [Electronic resource]. Address: http://www.dh.aist.go.jp/en/research/centered/2004HandDim/.

T. M. Greiner, “Hand anthropometry of US Army personnel,” U.S. Army Natick Research, Development and Engineering Center, Natick: MA, No. 5, 98 (1991).

Cited By

OSA participates in CrossRef's Cited-By Linking service. Citing articles from OSA journals and other participating publishers are listed here.

Alert me when this article is cited.