Abstract

This article briefly describes the results of the development and use at NPO GIPO of a full-size tool with an aspheric working surface for grinding. Aspherization is carried out with free abrasive on domestically produced Planeta machines, developed in the 1970s–80s by specialists at NPO GIPO and the Minsk Mechanical Factory and fabricated in Smorgon’ (Belarus).

© 2012 OSA

PDF Article

References

  • View by:
  • |
  • |
  • |

  1. V. G. Kuks and A. G. Khusnutdinov, “Producing aspheric optical surfaces of rotation in a wide range of process parameters,” Opt. Zh. 74, No. 1, 36 (2007). [J. Opt. Technol. 74, 27 (2007)].
  2. O. G. Karlin, V. G. Kuks, L. E. Lipovetskiĭ, L. V. Lukin, K. S. Mustafin, A. Z. Khabirov, and A. G. Khusnutdinov, Fabrication and Monitoring of Aspheric Optics (TsNII Informatsii, Moscow, 1980), pp. 21–40.
  3. O. G. Karlin and V. G. Kuks, “Production of optical items with aspheric surfaces using an elastic tool,” Opt. Mekh. Prom. No. 12, 57 (1966).
  4. V. G. Kuks, “Determining the optimum aspherization regimes on the Planeta machines,” Opt. Mekh. Prom. No. 2, 24 (1980). [Sov. J. Opt. Technol. 47, 87 (1980)].
  5. F. W. Preston, “The theory and design of plate-glass polishing machines,” J. Soc. Glass Technol. No. 11, 214 (1927).

2007 (1)

V. G. Kuks and A. G. Khusnutdinov, “Producing aspheric optical surfaces of rotation in a wide range of process parameters,” Opt. Zh. 74, No. 1, 36 (2007). [J. Opt. Technol. 74, 27 (2007)].

1980 (1)

V. G. Kuks, “Determining the optimum aspherization regimes on the Planeta machines,” Opt. Mekh. Prom. No. 2, 24 (1980). [Sov. J. Opt. Technol. 47, 87 (1980)].

1966 (1)

O. G. Karlin and V. G. Kuks, “Production of optical items with aspheric surfaces using an elastic tool,” Opt. Mekh. Prom. No. 12, 57 (1966).

1927 (1)

F. W. Preston, “The theory and design of plate-glass polishing machines,” J. Soc. Glass Technol. No. 11, 214 (1927).

Karlin, O. G.

O. G. Karlin and V. G. Kuks, “Production of optical items with aspheric surfaces using an elastic tool,” Opt. Mekh. Prom. No. 12, 57 (1966).

O. G. Karlin, V. G. Kuks, L. E. Lipovetskiĭ, L. V. Lukin, K. S. Mustafin, A. Z. Khabirov, and A. G. Khusnutdinov, Fabrication and Monitoring of Aspheric Optics (TsNII Informatsii, Moscow, 1980), pp. 21–40.

Khabirov, A. Z.

O. G. Karlin, V. G. Kuks, L. E. Lipovetskiĭ, L. V. Lukin, K. S. Mustafin, A. Z. Khabirov, and A. G. Khusnutdinov, Fabrication and Monitoring of Aspheric Optics (TsNII Informatsii, Moscow, 1980), pp. 21–40.

Khusnutdinov, A. G.

V. G. Kuks and A. G. Khusnutdinov, “Producing aspheric optical surfaces of rotation in a wide range of process parameters,” Opt. Zh. 74, No. 1, 36 (2007). [J. Opt. Technol. 74, 27 (2007)].

O. G. Karlin, V. G. Kuks, L. E. Lipovetskiĭ, L. V. Lukin, K. S. Mustafin, A. Z. Khabirov, and A. G. Khusnutdinov, Fabrication and Monitoring of Aspheric Optics (TsNII Informatsii, Moscow, 1980), pp. 21–40.

Kuks, V. G.

V. G. Kuks and A. G. Khusnutdinov, “Producing aspheric optical surfaces of rotation in a wide range of process parameters,” Opt. Zh. 74, No. 1, 36 (2007). [J. Opt. Technol. 74, 27 (2007)].

V. G. Kuks, “Determining the optimum aspherization regimes on the Planeta machines,” Opt. Mekh. Prom. No. 2, 24 (1980). [Sov. J. Opt. Technol. 47, 87 (1980)].

O. G. Karlin and V. G. Kuks, “Production of optical items with aspheric surfaces using an elastic tool,” Opt. Mekh. Prom. No. 12, 57 (1966).

O. G. Karlin, V. G. Kuks, L. E. Lipovetskiĭ, L. V. Lukin, K. S. Mustafin, A. Z. Khabirov, and A. G. Khusnutdinov, Fabrication and Monitoring of Aspheric Optics (TsNII Informatsii, Moscow, 1980), pp. 21–40.

Lipovetskii, L. E.

O. G. Karlin, V. G. Kuks, L. E. Lipovetskiĭ, L. V. Lukin, K. S. Mustafin, A. Z. Khabirov, and A. G. Khusnutdinov, Fabrication and Monitoring of Aspheric Optics (TsNII Informatsii, Moscow, 1980), pp. 21–40.

Lukin, L. V.

O. G. Karlin, V. G. Kuks, L. E. Lipovetskiĭ, L. V. Lukin, K. S. Mustafin, A. Z. Khabirov, and A. G. Khusnutdinov, Fabrication and Monitoring of Aspheric Optics (TsNII Informatsii, Moscow, 1980), pp. 21–40.

Mustafin, K. S.

O. G. Karlin, V. G. Kuks, L. E. Lipovetskiĭ, L. V. Lukin, K. S. Mustafin, A. Z. Khabirov, and A. G. Khusnutdinov, Fabrication and Monitoring of Aspheric Optics (TsNII Informatsii, Moscow, 1980), pp. 21–40.

Preston, F. W.

F. W. Preston, “The theory and design of plate-glass polishing machines,” J. Soc. Glass Technol. No. 11, 214 (1927).

J. Soc. Glass Technol. (1)

F. W. Preston, “The theory and design of plate-glass polishing machines,” J. Soc. Glass Technol. No. 11, 214 (1927).

Opt. Mekh. Prom. (2)

O. G. Karlin and V. G. Kuks, “Production of optical items with aspheric surfaces using an elastic tool,” Opt. Mekh. Prom. No. 12, 57 (1966).

V. G. Kuks, “Determining the optimum aspherization regimes on the Planeta machines,” Opt. Mekh. Prom. No. 2, 24 (1980). [Sov. J. Opt. Technol. 47, 87 (1980)].

Opt. Zh. (1)

V. G. Kuks and A. G. Khusnutdinov, “Producing aspheric optical surfaces of rotation in a wide range of process parameters,” Opt. Zh. 74, No. 1, 36 (2007). [J. Opt. Technol. 74, 27 (2007)].

Other (1)

O. G. Karlin, V. G. Kuks, L. E. Lipovetskiĭ, L. V. Lukin, K. S. Mustafin, A. Z. Khabirov, and A. G. Khusnutdinov, Fabrication and Monitoring of Aspheric Optics (TsNII Informatsii, Moscow, 1980), pp. 21–40.

Cited By

OSA participates in CrossRef's Cited-By Linking service. Citing articles from OSA journals and other participating publishers are listed here.

Alert me when this article is cited.