Abstract

We discuss the effect of stray light on a high-precision camera in an LEO(Low Earth Orbit) satellite. The critical objects and illumination objects were sorted to discover the stray light sources in the optical system. Scatter modeling was applied to determine a noise effect on the surface of a detector, and the relative flux of a signal and noise were also calculated. The stable range of reflectivity of the beam splitter was estimated for various scattering models.

© 2011 Optical Society of Korea

PDF Article

References

  • View by:
  • |
  • |

  1. G. L. Peterson, “Stray light calculation methods with opticalray trace software,” Proc. SPIE 3780, 132-137 (1999).
    [CrossRef]
  2. M. M. Talha, J. Chang, Y. Wang, T. Zhang, D. Cheng, andZ. H. Sun, “Design, tolerancing and stray light analyses ofa freeform HMD optical system,” Optik 121, 750-755 (2010).
  3. Y. Kim, P. D. Bisschop, and G. Vandenberghe, “Characterizationof stray light of ArF lithographic tools: modeling ofpower spectral density of an optical pupil,” Microelectron.Eng. 83, 643-646 (2006).
    [CrossRef]
  4. M. S. Scholl and G. Paez, “Cancellation of star light generatedby a nearby star-planet system upon detection with a rotationally-shearing interferometer,” Infrared Phys. & Tech. 40,357-365 (1999).
    [CrossRef]
  5. S. Iqbal, M. M. S. Gualini, and A. Asundi, “Measurementaccuracy of lateral-effect position-sensitive devices in presenceof stray illumination noise,” Sens. Actuators A 143, 286-292(2008).
    [CrossRef]
  6. X. Xia, Y. Shuai, and H. Tan, “Calculation techniqueswith the Monte Carlo method in stray radiation evaluation,”J. Quant. Spectron. & Rad. Trans. 95, 101-111 (2005).
    [CrossRef]
  7. M. S. Scholl, “Design parameters for a two-mirror telescopefor stray-light sensitive infrared applications,” Infrared Phys.& Tech. 37, 251-257 (1996).
    [CrossRef]
  8. C. Hung, Y. Fang, C. Tsai, C. Lin, K. Yeh, and J. Wu,“Optical design of high performance con-focal microscopywith digital micro-mirror and stray light filters,” Optik 121,944-952 (2010).
  9. C. C. Yang and F. W. Ciarallo, “Optimized sensor placementfor active visual inspection,” J. Robotic Syst. 18, 1-15(2001).
    [CrossRef]
  10. J. H. Lee, C. W. Lee, Y. M. Kim, and J. W. Kim, “Optomechanicaldesign of a compact imaging spectrometer for amicrosatellite STSAT3,” J. Opt. Soc. Korea 13, 193-200(2009).
    [CrossRef]
  11. C. S. Lim, “The optical design of miniaturized microscopeobjective for CARS imaging catheter with fiber bundle,” J.Opt. Soc. Korea 12, 424-430 (2010).

2010

M. M. Talha, J. Chang, Y. Wang, T. Zhang, D. Cheng, andZ. H. Sun, “Design, tolerancing and stray light analyses ofa freeform HMD optical system,” Optik 121, 750-755 (2010).

C. Hung, Y. Fang, C. Tsai, C. Lin, K. Yeh, and J. Wu,“Optical design of high performance con-focal microscopywith digital micro-mirror and stray light filters,” Optik 121,944-952 (2010).

C. S. Lim, “The optical design of miniaturized microscopeobjective for CARS imaging catheter with fiber bundle,” J.Opt. Soc. Korea 12, 424-430 (2010).

2009

J. H. Lee, C. W. Lee, Y. M. Kim, and J. W. Kim, “Optomechanicaldesign of a compact imaging spectrometer for amicrosatellite STSAT3,” J. Opt. Soc. Korea 13, 193-200(2009).
[CrossRef]

2008

S. Iqbal, M. M. S. Gualini, and A. Asundi, “Measurementaccuracy of lateral-effect position-sensitive devices in presenceof stray illumination noise,” Sens. Actuators A 143, 286-292(2008).
[CrossRef]

2006

Y. Kim, P. D. Bisschop, and G. Vandenberghe, “Characterizationof stray light of ArF lithographic tools: modeling ofpower spectral density of an optical pupil,” Microelectron.Eng. 83, 643-646 (2006).
[CrossRef]

2005

X. Xia, Y. Shuai, and H. Tan, “Calculation techniqueswith the Monte Carlo method in stray radiation evaluation,”J. Quant. Spectron. & Rad. Trans. 95, 101-111 (2005).
[CrossRef]

2001

C. C. Yang and F. W. Ciarallo, “Optimized sensor placementfor active visual inspection,” J. Robotic Syst. 18, 1-15(2001).
[CrossRef]

1999

G. L. Peterson, “Stray light calculation methods with opticalray trace software,” Proc. SPIE 3780, 132-137 (1999).
[CrossRef]

M. S. Scholl and G. Paez, “Cancellation of star light generatedby a nearby star-planet system upon detection with a rotationally-shearing interferometer,” Infrared Phys. & Tech. 40,357-365 (1999).
[CrossRef]

1996

M. S. Scholl, “Design parameters for a two-mirror telescopefor stray-light sensitive infrared applications,” Infrared Phys.& Tech. 37, 251-257 (1996).
[CrossRef]

Infrared Phys. & Tech.

M. S. Scholl and G. Paez, “Cancellation of star light generatedby a nearby star-planet system upon detection with a rotationally-shearing interferometer,” Infrared Phys. & Tech. 40,357-365 (1999).
[CrossRef]

M. S. Scholl, “Design parameters for a two-mirror telescopefor stray-light sensitive infrared applications,” Infrared Phys.& Tech. 37, 251-257 (1996).
[CrossRef]

J. Opt. Soc. Korea

C. S. Lim, “The optical design of miniaturized microscopeobjective for CARS imaging catheter with fiber bundle,” J.Opt. Soc. Korea 12, 424-430 (2010).

J. Quant. Spectron. & Rad. Trans.

X. Xia, Y. Shuai, and H. Tan, “Calculation techniqueswith the Monte Carlo method in stray radiation evaluation,”J. Quant. Spectron. & Rad. Trans. 95, 101-111 (2005).
[CrossRef]

J. Robotic Syst.

C. C. Yang and F. W. Ciarallo, “Optimized sensor placementfor active visual inspection,” J. Robotic Syst. 18, 1-15(2001).
[CrossRef]

Journal of the Optical Society of Korea

J. H. Lee, C. W. Lee, Y. M. Kim, and J. W. Kim, “Optomechanicaldesign of a compact imaging spectrometer for amicrosatellite STSAT3,” J. Opt. Soc. Korea 13, 193-200(2009).
[CrossRef]

Microelectron. Eng.

Y. Kim, P. D. Bisschop, and G. Vandenberghe, “Characterizationof stray light of ArF lithographic tools: modeling ofpower spectral density of an optical pupil,” Microelectron.Eng. 83, 643-646 (2006).
[CrossRef]

Optik

C. Hung, Y. Fang, C. Tsai, C. Lin, K. Yeh, and J. Wu,“Optical design of high performance con-focal microscopywith digital micro-mirror and stray light filters,” Optik 121,944-952 (2010).

M. M. Talha, J. Chang, Y. Wang, T. Zhang, D. Cheng, andZ. H. Sun, “Design, tolerancing and stray light analyses ofa freeform HMD optical system,” Optik 121, 750-755 (2010).

Proc. SPIE

G. L. Peterson, “Stray light calculation methods with opticalray trace software,” Proc. SPIE 3780, 132-137 (1999).
[CrossRef]

Sens. Actuators A

S. Iqbal, M. M. S. Gualini, and A. Asundi, “Measurementaccuracy of lateral-effect position-sensitive devices in presenceof stray illumination noise,” Sens. Actuators A 143, 286-292(2008).
[CrossRef]

Cited By

OSA participates in CrossRef's Cited-By Linking service. Citing articles from OSA journals and other participating publishers are listed here.

Alert me when this article is cited.