Abstract

No abstract available.

Full Article  |  PDF Article

References

  • View by:
  • |
  • |
  • |

  1. L. Gildart and N. Wright, Rev. Sci. Inst. 12, 204 (1941).
  2. A cell for non-volatile liquids has been described by E. S. Barr, Rev. Sci. Inst. 12, 396 (1941).
  3. Cf. J. Rud Nielsen and Don C. Smith, Ind. Eng. Chem., Anal. Ed. 15, 609 (1943).

1943 (1)

Cf. J. Rud Nielsen and Don C. Smith, Ind. Eng. Chem., Anal. Ed. 15, 609 (1943).

1941 (2)

L. Gildart and N. Wright, Rev. Sci. Inst. 12, 204 (1941).

A cell for non-volatile liquids has been described by E. S. Barr, Rev. Sci. Inst. 12, 396 (1941).

Barr, E. S.

A cell for non-volatile liquids has been described by E. S. Barr, Rev. Sci. Inst. 12, 396 (1941).

Gildart, L.

L. Gildart and N. Wright, Rev. Sci. Inst. 12, 204 (1941).

Rud Nielsen, J.

Cf. J. Rud Nielsen and Don C. Smith, Ind. Eng. Chem., Anal. Ed. 15, 609 (1943).

Smith, Don C.

Cf. J. Rud Nielsen and Don C. Smith, Ind. Eng. Chem., Anal. Ed. 15, 609 (1943).

Wright, N.

L. Gildart and N. Wright, Rev. Sci. Inst. 12, 204 (1941).

Ind. Eng. Chem., Anal. Ed. (1)

Cf. J. Rud Nielsen and Don C. Smith, Ind. Eng. Chem., Anal. Ed. 15, 609 (1943).

Rev. Sci. Inst. (2)

L. Gildart and N. Wright, Rev. Sci. Inst. 12, 204 (1941).

A cell for non-volatile liquids has been described by E. S. Barr, Rev. Sci. Inst. 12, 396 (1941).

Cited By

OSA participates in CrossRef's Cited-By Linking service. Citing articles from OSA journals and other participating publishers are listed here.

Alert me when this article is cited.


Figures (5)

Fig. 1
Fig. 1

A completed absorption cell with supporting frame removed and its component parts. The cell is closed by tapping the conduits drilled into the rocksalt plates and inserting a screw carrying a Neoprene washer.

Fig. 2
Fig. 2

Complete cell showing the supporting frame and the sliding bracket carrying the closing screw. The Neoprene washer attached to the closing screw by a small screw is pressed against the top of the cell with the head of the small screw fitting into the conduit.

Fig. 3
Fig. 3

Cross section of the variable absorption cell suitable for volatile liquids.

Fig. 4
Fig. 4

Interference fringes obtained with an empty cell in the region 10.4 to 13.0 microns (a) observed with three thicknesses of the variable cell around 1.0 mm and (b) with three thicknesses around 0.15 mm.

Fig. 5
Fig. 5

Interference fringes in the region below 4.3 microns observed with six thicknesses of the variable cell between 0.09 and 0.03 mm.

Equations (2)

Equations on this page are rendered with MathJax. Learn more.

log ( I 0 / I ) = ( 1 c 1 + 2 c 2 ) l + K ,
2 l = n λ 1 λ 2 / ( λ 1 - λ 2 ) .