Abstract

No abstract available.

Full Article  |  PDF Article

References

  • View by:
  • |
  • |
  • |

  1. O. Feussner, Arch. Eisenhüttenwes 6, 551 (1932–33); also O. Feussner, U. S. Patent1,971,215. See also H. B. Vincent and R. A. Sawyer, J. App. Phys. 8, 163 (1937).
    [Crossref]
  2. Duffendack and Thompson, Proc. A. S. T. M. 36, Part II (1936).
  3. H. B. Vincent and R. A. Sawyer, J. Opt. Soc. Am. 31, 639 (1941).
    [Crossref]
  4. J. S. Owens, Metals and Alloys (January, 1938).
  5. K. Z. Pfeilsticker, Zeits. f. Elektrochemie 43, 719 (1937).
  6. H. Hemmendinger, J. Opt. Soc. Am. 32, 149 (1942); F. G. Brockman and F. P. Hochgesang, Ind. Eng. Chem. Anal. Ed. 14, 796 (1942).
    [Crossref]

1942 (1)

1941 (1)

1938 (1)

J. S. Owens, Metals and Alloys (January, 1938).

1937 (1)

K. Z. Pfeilsticker, Zeits. f. Elektrochemie 43, 719 (1937).

1936 (1)

Duffendack and Thompson, Proc. A. S. T. M. 36, Part II (1936).

Duffendack,

Duffendack and Thompson, Proc. A. S. T. M. 36, Part II (1936).

Feussner, O.

O. Feussner, Arch. Eisenhüttenwes 6, 551 (1932–33); also O. Feussner, U. S. Patent1,971,215. See also H. B. Vincent and R. A. Sawyer, J. App. Phys. 8, 163 (1937).
[Crossref]

Hemmendinger, H.

Owens, J. S.

J. S. Owens, Metals and Alloys (January, 1938).

Pfeilsticker, K. Z.

K. Z. Pfeilsticker, Zeits. f. Elektrochemie 43, 719 (1937).

Sawyer, R. A.

Thompson,

Duffendack and Thompson, Proc. A. S. T. M. 36, Part II (1936).

Vincent, H. B.

Arch. Eisenhüttenwes (1)

O. Feussner, Arch. Eisenhüttenwes 6, 551 (1932–33); also O. Feussner, U. S. Patent1,971,215. See also H. B. Vincent and R. A. Sawyer, J. App. Phys. 8, 163 (1937).
[Crossref]

J. Opt. Soc. Am. (2)

Metals and Alloys (1)

J. S. Owens, Metals and Alloys (January, 1938).

Proc. A. S. T. M. (1)

Duffendack and Thompson, Proc. A. S. T. M. 36, Part II (1936).

Zeits. f. Elektrochemie (1)

K. Z. Pfeilsticker, Zeits. f. Elektrochemie 43, 719 (1937).

Cited By

OSA participates in Crossref's Cited-By Linking service. Citing articles from OSA journals and other participating publishers are listed here.

Alert me when this article is cited.


Figures (5)

Fig. 1
Fig. 1

Automatic arc starter. The starter is shown above the dotted line, connected to a conventional arc source below.

Fig. 2
Fig. 2

Stabilized microphotometer power supply. Adjustable resistors from left to right are R1, R2, R3.

Fig. 3
Fig. 3

Electrode clamps particularly suitable for magnesium alloys. The electrode spacing mechanism can be swung forward so that the glass spacer is between the two clamps.

Fig. 4
Fig. 4

Intensity control sector, having a continuously variable transmission from 50 percent to 100 percent.

Fig. 5
Fig. 5

Block diagram showing operating functions of the timing system for automatic spectrograph.