Abstract

This paper presents a 10 Gb/s avalanche- photodiode-based DC-coupled reshaping and reamplifying (2R) burst-mode receiver with on-chip auto-reset generation and multiple data rate support, designed for 10G-GPONs. A short 2R settling time of 75 ns (150 ns for lower-rate operation), a high receiver sensitivity of −31.3 dBm, and a large loud/soft ratio of 25.3 dB are demonstrated at 2.5/5/10 Gb/s in burst-mode operation. Allowing multi-rate operation without external reset signals, it shows great potential for use in emerging symmetric 10G-GPON systems and allows for more flexible future optical access networks.

©2012 Optical Society of America

Full Article  |  PDF Article
More Like This
DC-coupled burst-mode receiver with high sensitivity, wide dynamic range and short settling time for symmetric 10G-GPONs

Jasmien Put, Xin Yin, Xing-Zhi Qiu, Jan Gillis, Jochen Verbrugghe, Johan Bauwelinck, Jan Vandewege, Fabrice Blache, Delphine Lanteri, Mohand Achouche, Heinz-Georg Krimmel, Dora van Veen, and Peter Vetter
Opt. Express 19(26) B594-B603 (2011)

A 10Gb/s APD-based linear burst-mode receiver with 31dB dynamic range for reach-extended PON systems

Xin Yin, Bart Moeneclaey, Xing-Zhi Qiu, Jochen Verbrugghe, Koen Verheyen, Johan Bauwelinck, Jan Vandewege, Mohand Achouche, and Y. Chang
Opt. Express 20(26) B462-B469 (2012)

Demonstration of 10  Gbit/s Burst-Mode Transmission Using a Linear Burst-Mode Receiver and Burst-Mode Electronic Equalization [Invited]

Stefano Porto, Cleitus Antony, Anil Jain, Denis Kelly, Daniel Carey, Giuseppe Talli, Peter Ossieur, and Paul D. Townsend
J. Opt. Commun. Netw. 7(1) A118-A125 (2015)

References

You do not have subscription access to this journal. Citation lists with outbound citation links are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access Optica Member Subscription

Cited By

You do not have subscription access to this journal. Cited by links are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access Optica Member Subscription

Figures (11)

You do not have subscription access to this journal. Figure files are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access Optica Member Subscription

Tables (1)

You do not have subscription access to this journal. Article tables are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access Optica Member Subscription

Equations (3)

You do not have subscription access to this journal. Equations are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access Optica Member Subscription