Abstract
We demonstrate an all-fiber ultra-low numerical aperture high power fiber laser system operating in the continuous-wave regime at a central wavelength of 1080 nm. A special Ytterbium-doped fiber preform has been designed and fabricated by using modified chemical vapor deposition technique with the deposition percentages of 0.03mol% of Yb2O3, 1.8mol% of Al2O3, and 2.1mol% of P2O5. Then it has been drawn to obtain an active fiber having core/cladding diameters of 26 μm/410 μm respectively. The numerical aperture of the fiber has been first predicted as 0.034 from refractive index profile of the preform. Afterward, this number has been verified with a simple test setup by altering the bending diameter of the fiber and the excitation conditions of it. To test the high power performance, a laser system has been constructed in a master oscillator power amplifier configuration, and ∼ 80 W seed signal power is amplified to 1.05 kW. The quality of the laser output beam has been measured in terms of M2 value along both x and y coordinates as 1.11 and 1.16 respectively.
PDF Article
More Like This
Low-numerical aperture confined-doped long-tapered Yb-doped silica fiber for a single-mode high-power fiber amplifier
Zhilun Zhang, Xianfeng Lin, Xu Zhang, Yonghui Luo, Shibiao Liao, Xiaoliang Wang, Gui Chen, Yingbin Xing, Haiqing Li, Jinggang Peng, Nengli Dai, Jun Zhou, and Jinyan Li
Opt. Express 30(18) 32333-32346 (2022)
Cited By
You do not have subscription access to this journal. Cited by links are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.
Contact your librarian or system administrator
or
Login to access Optica Member Subscription