Abstract
We present two stabilization methods for an opto-electronic oscillator. By using a frequency discriminator with a feedback control loop the long-term stabilization was improved, and a frequency drift of 0.05 ppm/K was achieved without any fiber thermal stabilization. In addition, the phase-noise degradation as a result of the discriminator control loop was investigated. To the best of our knowledge, this has not been done before for this type of method. Our study revealed that a properly designed control loop does not increase the phase noise. The second stabilization method was used to increase the side-mode suppression ratio. This was achieved with an additional control loop in the form of an oscillator-loop phase modulation. In this way, a 5-dB increase in the side-mode suppression ratio was recorded. The phase-noise degradation was less than 1 dB in the close-in region. The two methods were designed to operate simultaneously. This design provides both simplicity and cost effectiveness for the stabilized opto-electronic oscillator.
© 2015 IEEE
PDF Article
More Like This
Cited By
You do not have subscription access to this journal. Cited by links are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.
Contact your librarian or system administrator
or
Login to access Optica Member Subscription