Abstract

We report the fabrication of InGaN–GaN power flip-chip (FC) light-emitting diodes (LEDs) with a roughened sapphire backside surface prepared by grinding. It was found that we can increase output power of the FC LED by about 35% by roughening the backside surface of the sapphire substrate. The reliability of the proposed device was also better, as compared to power FC LEDs with a conventional flat sapphire backside surface.

© 2009 IEEE

High performance GaN-based flip-chip LEDs with different electrode patterns

Ray-Hua Horng, Shih-Hao Chuang, Ching-Ho Tien, Sin-Cyuan Lin, and Dong-Sing Wuu
Opt. Express 22(S3) A941-A946 (2014)

Numerical simulation and experimental investigation of GaN-based flip-chip LEDs and top-emitting LEDs

Xingtong Liu, Shengjun Zhou, Yilin Gao, Hongpo Hu, Yingce Liu, Chengqun Gui, and Sheng Liu
Appl. Opt. 56(34) 9502-9509 (2017)

GaN-based mid-power flip-chip light-emitting diode with high −3  dB bandwidth for visible light communications

Zheng Zhou, Bing Yan, Xuejin Ma, Dongdong Teng, Lilin Liu, and Gang Wang
Appl. Opt. 57(11) 2773-2779 (2018)

Highly efficient InGaN-based LED with pre-roughening backside of GaN substrate

Ezzah A. Alias, Muhammad E. A. Samsudin, Norasmida Ibrahim, Asad J. Mughal, Steven P. Denbaars, James S. Speck, Shuji Nakamura, and Norzaini Zainal
J. Opt. Soc. Am. B 37(6) 1614-1619 (2020)

Light-extraction efficiency control in AlGaN-based deep-ultraviolet flip-chip light-emitting diodes: a comparison to InGaN-based visible flip-chip light-emitting diodes

Keon Hwa Lee, Hyun Jung Park, Seung Hwan Kim, Mojtaba Asadirad, Yong-Tae Moon, Joon Seop Kwak, and Jae-Hyun Ryou
Opt. Express 23(16) 20340-20349 (2015)