Abstract

Head Mounted Displays have been used in various forms to assist surgeons and other medical personnel to support and improve visualization of the work site. Historically, many of these were of inadequate resolution, bulky, cave-like and heavy and they, deservedly, received limited acceptance. Recent availability of high-resolution displays, lighter structures and the various see-though designs that merge both real world and registered synthetic imagery have significantly increased the benefits of these devices for the medical community.

© 2008 IEEE

PDF Article

References

  • View by:
  • |
  • |

  1. H. Rich, A. Lastra, Virtual Environments a Survey of the Technology Computer Science Dept. Univ. North CarolinaChapel Hill Tech. Rep. (1993) pp. 16.
  2. D. Colucci, G. Hirota, K. Keller, A. State, S. Drake, R. Fish, "Video see-through HMD for surgery assisted by augmented reality," SPIE EI' 97 .
  3. M. C. Jacobs, M. A. Livingston, A. State, "Managing latency in complex augmented reality systems," Proc. 1997 Symposium on Interactive 3D Graphics (1997) pp. 49-54.
  4. A. State, K. P. Keller, H. Fuchs, "Simulation-based design and rapid prototyping of a parallax-free, orthoscopic video see-through head-mounted display," Proc. Int. Symp. on Mixed and Augmented Reality (ISMAR) (2005).
  5. M. Rosenthal, A. State, J. Lee, G. Hirota, J. Ackerman, K. Keller, E. D. Pisano, M. Jiroutek, K. Muller, H. Fuchs, "Augmented reality guidance for needle biopsies: An initial randomized, controlled trial in phantoms," Medical Image Anal. 6, 313-320 (2002).
  6. R. Martins, V. Shaoulov, Y. Ha, J. P. Rolland, "A mobile head-worn projection display," Opt. Express 15, 14530-14538 (2007).
  7. C. Ozan, J. Rolland, "Head-worn displays," J. Display Technol. 2, (2006).
  8. F. G. Hamza-Lup, A. Santhanam, C. Imielinska, S. Meeks, J. P. Rolland, "Distributed augmented reality with 3D lung dynamics—A planning tool concept," IEEE Trans. Inf. Technol. Biomed. 11, 40-46 (2007).
  9. K. Kiyokawa, Y. Kurata, H. Ohno, "An optical see-through display for mutual occlusion with a real-time stereovision system," Computer and Graphics (2001).
  10. K. Kiyokawa, M. Billinghurst, B. Campbell, E. Woods, "An occlusion-capable optical see-through head mount display for supporting co-located collaboration," ISMAR 2003 .
  11. O. Cakmakci, J. P. Rolland, "Head-worn displays," J. Display Technol. 2, 199-216 (2006).
  12. O. Cakmakci, J. P. Rolland, "Design and fabrication of a dual-element off-axis near-eye optical magnifier," Opt. Lett. 32, 1363-1365 (2007).

2007

F. G. Hamza-Lup, A. Santhanam, C. Imielinska, S. Meeks, J. P. Rolland, "Distributed augmented reality with 3D lung dynamics—A planning tool concept," IEEE Trans. Inf. Technol. Biomed. 11, 40-46 (2007).

O. Cakmakci, J. P. Rolland, "Design and fabrication of a dual-element off-axis near-eye optical magnifier," Opt. Lett. 32, 1363-1365 (2007).

R. Martins, V. Shaoulov, Y. Ha, J. P. Rolland, "A mobile head-worn projection display," Opt. Express 15, 14530-14538 (2007).

2006

O. Cakmakci, J. P. Rolland, "Head-worn displays," J. Display Technol. 2, 199-216 (2006).

C. Ozan, J. Rolland, "Head-worn displays," J. Display Technol. 2, (2006).

2002

M. Rosenthal, A. State, J. Lee, G. Hirota, J. Ackerman, K. Keller, E. D. Pisano, M. Jiroutek, K. Muller, H. Fuchs, "Augmented reality guidance for needle biopsies: An initial randomized, controlled trial in phantoms," Medical Image Anal. 6, 313-320 (2002).

2001

K. Kiyokawa, Y. Kurata, H. Ohno, "An optical see-through display for mutual occlusion with a real-time stereovision system," Computer and Graphics (2001).

Computer and Graphics

K. Kiyokawa, Y. Kurata, H. Ohno, "An optical see-through display for mutual occlusion with a real-time stereovision system," Computer and Graphics (2001).

IEEE Trans. Inf. Technol. Biomed.

F. G. Hamza-Lup, A. Santhanam, C. Imielinska, S. Meeks, J. P. Rolland, "Distributed augmented reality with 3D lung dynamics—A planning tool concept," IEEE Trans. Inf. Technol. Biomed. 11, 40-46 (2007).

J. Display Technol.

O. Cakmakci, J. P. Rolland, "Head-worn displays," J. Display Technol. 2, 199-216 (2006).

C. Ozan, J. Rolland, "Head-worn displays," J. Display Technol. 2, (2006).

Medical Image Anal.

M. Rosenthal, A. State, J. Lee, G. Hirota, J. Ackerman, K. Keller, E. D. Pisano, M. Jiroutek, K. Muller, H. Fuchs, "Augmented reality guidance for needle biopsies: An initial randomized, controlled trial in phantoms," Medical Image Anal. 6, 313-320 (2002).

Opt. Express

Opt. Lett.

Other

K. Kiyokawa, M. Billinghurst, B. Campbell, E. Woods, "An occlusion-capable optical see-through head mount display for supporting co-located collaboration," ISMAR 2003 .

H. Rich, A. Lastra, Virtual Environments a Survey of the Technology Computer Science Dept. Univ. North CarolinaChapel Hill Tech. Rep. (1993) pp. 16.

D. Colucci, G. Hirota, K. Keller, A. State, S. Drake, R. Fish, "Video see-through HMD for surgery assisted by augmented reality," SPIE EI' 97 .

M. C. Jacobs, M. A. Livingston, A. State, "Managing latency in complex augmented reality systems," Proc. 1997 Symposium on Interactive 3D Graphics (1997) pp. 49-54.

A. State, K. P. Keller, H. Fuchs, "Simulation-based design and rapid prototyping of a parallax-free, orthoscopic video see-through head-mounted display," Proc. Int. Symp. on Mixed and Augmented Reality (ISMAR) (2005).

Cited By

OSA participates in CrossRef's Cited-By Linking service. Citing articles from OSA journals and other participating publishers are listed here.

Alert me when this article is cited.