Abstract
A facile method for fabricating near ultraviolet light-emitting diodes (NUV LEDs) with better crystal quality and enhanced light emission is demonstrated by tuning total working pressure to modify the morphology of the buffer layer. With the conditions favoring the transition
from 2-D to 3-D island growth in the GaN buffer layer, the crystal quality of the epitaxial GaN film is improved, leading to a decrease in the full-width at half-maximum of the (1 0 2) peak in
$X$
-ray rocking
curve measurement from 293 (arcsec) to 230 (arcsec). Scanning electron microscopy images imply the morphology of GaN grain boundaries at the buffer stage is different. The transmission electron microscopy analysis shows the edge dislocation can be bended due to the controlled
morphology of buffer layer, leading to a better crystal quality of the GaN epitaxial film. Therefore, the reverse current is reduced with the reverse bias of
$ - {40 V}$
. Moreover, the output power in lamp-formed
NUV LEDs at a driving current of 20 mA can be enhanced by about 12%.
© 2016 IEEE
PDF Article
More Like This
Performance enhancement of GaN-based flip-chip ultraviolet light-emitting diodes with a RPD AlN nucleation layer on patterned sapphire substrate
B. C. Lin, C. H. Chiu, C. Y. Lee, H. V. Han, P. M. Tu, T. P. Chen, Z. Y. Li, P. T. Lee, C. C. Lin, G. C. Chi, C. H. Chen, B. Fan, C. Y. Chang, and H. C. Kuo
Opt. Mater. Express 4(8) 1632-1640 (2014)
Cited By
You do not have subscription access to this journal. Cited by links are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.
Contact your librarian or system administrator
or
Login to access Optica Member Subscription