Expand this Topic clickable element to expand a topic
OSA Publishing
72 papers in 13 sessions; 1 session videos Change year:
Actions

Assessing a New Imaging Modality

JM1A.1 Optical Fabrication and Testing (OFT) 2012 View: PDF

Image Quality Assessment: How Blind is Blind?

JM1A.2 Optical Fabrication and Testing (OFT) 2012 View: PDF

Survey of Applications for Ocean Color and Imagery from EOS MODIS and Early Results from NPP-VIIRS

JM1A.3 Optical Fabrication and Testing (OFT) 2012 View: PDF

Small Satellites: The Desire for a Mass Producible, Mass Customizable Nanosatellite

JM1A.4 Optical Fabrication and Testing (OFT) 2012 View: PDF

Collaborative work within Optical Engineering: Ethnography and curricular development

JTu5A.1 Optical Fabrication and Testing (OFT) 2012 View: PDF

Quality assessment of precision optical surfaces through light scattering techniques

JTu5A.10 Optical Fabrication and Testing (OFT) 2012 View: PDF

Birefringence Dispersion Measured by Low-coherence Spectral Interferometry Using a Spectrophotometer

JTu5A.11 Optical Fabrication and Testing (OFT) 2012 View: PDF

Physical, Structural, and Optical Changes in Infrared Glasses as Prepared by Precision Glass Molding (PGM)

JTu5A.12 Optical Fabrication and Testing (OFT) 2012 View: PDF

Appling Ronchi test to evaluate local and global surface errors without both approximations and integration

JTu5A.13 Optical Fabrication and Testing (OFT) 2012 View: PDF

Polarization sensitivity allows novel sensing opportunities in terahertz time-domain spectroscopy

JTu5A.17 Optical Fabrication and Testing (OFT) 2012 View: PDF

Measurement and Analysis for Biological Tissue from a Ring-scanning-based NIR Optical Imaging System

JTu5A.19 Optical Fabrication and Testing (OFT) 2012 View: PDF

UFF Belt Characterization

JTu5A.2 Optical Fabrication and Testing (OFT) 2012 View: PDF

Design and Comparison for a Ring-scanning-based NIR Optical Imaging System

JTu5A.21 Optical Fabrication and Testing (OFT) 2012 View: PDF

An Estimation Theoretic Framework for Structured Illumination Microscopy

JTu5A.23 Optical Fabrication and Testing (OFT) 2012 View: PDF

Ringing Reduction for Radially Restored Images

JTu5A.24 Optical Fabrication and Testing (OFT) 2012 View: PDF

Quasi-optical Terahertz Devices

JTu5A.25 Optical Fabrication and Testing (OFT) 2012 View: PDF

Parallel Shot Noise Reduction of Phase Reconstruction in Digital Holographic Microscopy

JTu5A.26 Optical Fabrication and Testing (OFT) 2012 View: PDF

A High Magnification Light-Field Telescope for Extended Depth-of-Field Biometric Imaging

JTu5A.27 Optical Fabrication and Testing (OFT) 2012 View: PDF

Improving Layered 3D Displays with a Lens

JTu5A.29 Optical Fabrication and Testing (OFT) 2012 View: PDF

Nano-Structured Optics for Surface Metrology Research at the National Institute of Standards and Technology

JTu5A.3 Optical Fabrication and Testing (OFT) 2012 View: PDF

3-Point LPG with High Temperature Sensitivity

JTu5A.31 Optical Fabrication and Testing (OFT) 2012 View: PDF

Spectral models of non-optical water quality parameters of urban lakes: A case study in Guangzhou, China

JTu5A.34 Optical Fabrication and Testing (OFT) 2012 View: PDF

Step-height measurement by low-coherence interferometry based on wavelet transform

JTu5A.4 Optical Fabrication and Testing (OFT) 2012 View: PDF

Optical Testing Applied to a 6.5-Meter Mirror

JTu5A.6 Optical Fabrication and Testing (OFT) 2012 View: PDF

Model for frictional forces to reproduce the dragging forces in the polishing process

JTu5A.7 Optical Fabrication and Testing (OFT) 2012 View: PDF

Precision Glass Molding of lenses by using the nanotech molding process - a practical summary

JTu5A.9 Optical Fabrication and Testing (OFT) 2012 View: PDF

The Role of Ce3+ vs. Ce4+ during the Polishing of Silicon Dioxide and Silicon Nitride Films using Ceria Abrasives

OM2D.1 Optical Fabrication and Testing (OFT) 2012 View: PDF

Synthetic Fused Silica: Unique Material Properties and Some New Applications

OM2D.2 Optical Fabrication and Testing (OFT) 2012 View: PDF

A Tribute to Norm Brown’s Technical Contributions to the Field of Optical Fabrication and Testing

OM3D.1 Optical Fabrication and Testing (OFT) 2012 View: PDF

Polishing with a Vortex: A Decade in Hydrodynamic Radial Polishing

OM3D.2 Optical Fabrication and Testing (OFT) 2012 View: PDF

New Approaches to MRF®

OM3D.3 Optical Fabrication and Testing (OFT) 2012 View: PDF

Abrasive Jet Polishing Approaches to the Manufacture of Micro-optics with Complex Shapes

OM3D.4 Optical Fabrication and Testing (OFT) 2012 View: PDF

Control of Mid-spatial-frequency Errors for Large Steep Aspheric Surfaces

OM4D.1 Optical Fabrication and Testing (OFT) 2012 View: PDF

Minimize Mid-Spatial Frequencies on Aspherical Surfaces

OM4D.2 Optical Fabrication and Testing (OFT) 2012 View: PDF

Laser polishing of lenses of fused silica and BK7

OM4D.3 Optical Fabrication and Testing (OFT) 2012 View: PDF

The role of the Zetapotential in the Polishing Process of Optical Glasses

OM4D.4 Optical Fabrication and Testing (OFT) 2012 View: PDF

Evaluating the Effect of Single Frequency Vibrations on Pitch Polishing Outcomes

OM4D.5 Optical Fabrication and Testing (OFT) 2012 View: PDF

Aspheric Finishing of Glass and SiC Optics

OM4D.6 Optical Fabrication and Testing (OFT) 2012 View: PDF

Light Scattering & Complex Optical Components: Modelization and Characterization

OTu1D.1 Optical Fabrication and Testing (OFT) 2012 View: PDF

Light scattering-based measurement of relevant surface roughness

OTu1D.2 Optical Fabrication and Testing (OFT) 2012 View: PDF

Apparent wave front aberration in the "Cat's Eye" configuration at high apertures

OTu1D.3 Optical Fabrication and Testing (OFT) 2012 View: PDF

Lateral resolution and instrument transfer function as criteria for selecting surface metrology instruments

OTu1D.4 Optical Fabrication and Testing (OFT) 2012 View: PDF

Minimizing Artifacts in Analysis of Surface Statistics

OTu1D.5 Optical Fabrication and Testing (OFT) 2012 View: PDF

Characterizing optical surfaces using the area structure function

OTu1D.6 Optical Fabrication and Testing (OFT) 2012 View: PDF

SAGUARO: Data Analysis Software for Optical Engineering

OTu1D.7 Optical Fabrication and Testing (OFT) 2012 View: PDF

Interferometric Measurements of Aspheres with No Axial Symmetry

OTu2D.1 Optical Fabrication and Testing (OFT) 2012 View: PDF

Self-Aligning Telescope With Off-Axis And Aspheric Mirror Segments

OTu2D.2 Optical Fabrication and Testing (OFT) 2012 View: PDF

Application of a Multiple Cavity Fabry-Perot Interferometer for Measuring the Thermal Expansion and Temperature Dependence of Refractive Index in New Gradient-Index Materials

OTu2D.3 Optical Fabrication and Testing (OFT) 2012 View: PDF

In-situ testing of high resolution optical systems via localized wavefront curvature sensing

OTu2D.4 Optical Fabrication and Testing (OFT) 2012 View: PDF

Objective Measurement of Scratch and Dig

OTu2D.5 Optical Fabrication and Testing (OFT) 2012 View: PDF

New Joining Technologies for High Stable and Smart Optical Systems

OTu3D.1 Optical Fabrication and Testing (OFT) 2012 View: PDF

Lab-on-a-chip Applications Enabled by Acousto-opto-fluidics

OTu3D.2 Optical Fabrication and Testing (OFT) 2012 View: PDF

Glass Ductility and Fracture at the 50 to 100 - nm Scale

OTu4D.1 Optical Fabrication and Testing (OFT) 2012 View: PDF

Optical Design with Gradient-Index Elements Constrained to Real Material Properties

OTu4D.2 Optical Fabrication and Testing (OFT) 2012 View: PDF

Nondestructive Metrology of Layered Polymeric GRIN Materials Using Optical Coherence Tomography

OTu4D.3 Optical Fabrication and Testing (OFT) 2012 View: PDF

Improved modeling of grid structures on optics: transmission, sheet resistance and diffraction effects

OTu4D.5 Optical Fabrication and Testing (OFT) 2012 View: PDF

Monolithic, Low-index Guided-mode Resonance Filters: Fabrication and Simulation

OTu4D.6 Optical Fabrication and Testing (OFT) 2012 View: PDF

Multi-dielectric structured components for giant optical field enhancement: an optimization process

OTu4D.7 Optical Fabrication and Testing (OFT) 2012 View: PDF

Application-oriented Testing of Coatings for Precision Glass Molding Tools

OW1D.1 Optical Fabrication and Testing (OFT) 2012 View: PDF

Optics Fabrication with a Laser Based Process Chain

OW1D.2 Optical Fabrication and Testing (OFT) 2012 View: PDF

Super Polishing of SiC Aspheric Optics

OW1D.3 Optical Fabrication and Testing (OFT) 2012 View: PDF

Aspheric and Freeform Hybrid Glass-polymer Optics: The Properties, Implementation and Performance

OW1D.4 Optical Fabrication and Testing (OFT) 2012 View: PDF

Bending Large Glass Plates with Local Heat and Flexible Mold

OW1D.5 Optical Fabrication and Testing (OFT) 2012 View: PDF

Freeforms about to lift off - standardization of freeform optics

OW2D.1 Optical Fabrication and Testing (OFT) 2012 View: PDF

Interferometric Null Configurations for Measuring ϕ (Phi) -polynomial Surfaces

OW2D.2 Optical Fabrication and Testing (OFT) 2012 View: PDF

Diamond Machining of Freeform Infrared Optics

OW2D.4 Optical Fabrication and Testing (OFT) 2012 View: PDF

UK Developments Towards Rapid Process Chains for Metre Scale Optics

OW3D.1 Optical Fabrication and Testing (OFT) 2012 View: PDF

Mapping Distortion Correction for GMT Interferometric Test

OW3D.2 Optical Fabrication and Testing (OFT) 2012 View: PDF

Dependence of Thermal Stresses on Substrate Thickness During Wet Processing of Large Coated Optics

OW3D.3 Optical Fabrication and Testing (OFT) 2012 View: PDF

X-ray Optics for Astronomy

OW3D.4 Optical Fabrication and Testing (OFT) 2012 View: PDF

Light-weighting, Polishing, Bonding and Testing for the SEOSAT/Ingenio Telescope Mirrors

OW3D.5 Optical Fabrication and Testing (OFT) 2012 View: PDF

Tutorial on Recent Advances in Ion Beam and Plasma Jet Processing

OW4D.1 Optical Fabrication and Testing (OFT) 2012 View: PDF

Select as filters


    Select Topics Cancel
    © Copyright 2017 | The Optical Society. All Rights Reserved