54 papers in 11 sessions Change year:

Next Generation Optics Manufacturing

OMA1 Optical Fabrication and Testing (OF&T) 2000 View: PDF

Deterministic Contour Grinding of Conformal Optics

OMA2 Optical Fabrication and Testing (OF&T) 2000 View: PDF

Computer simulation and experimental validation of errors on contour ground surfaces

OMA3 Optical Fabrication and Testing (OF&T) 2000 View: PDF

Effect of tool wear on tool and workpiece profiles produced in contour grinding

OMA4 Optical Fabrication and Testing (OF&T) 2000 View: PDF

Chatter simulation and stability predictions for contour grinding of optical glasses

OMA5 Optical Fabrication and Testing (OF&T) 2000 View: PDF

FROM ABRASIVE SIZE TO SUBSURFACE DAMAGE IN GRINDING

OMA6 Optical Fabrication and Testing (OF&T) 2000 View: PDF

Advanced Technology for Deep Precision Aspheres Fabrication with High Convergence - Demonstration of the Processing Cycle

OMB1 Optical Fabrication and Testing (OF&T) 2000 View: PDF

Radical Jet Etching (RJE) - a New Tool for High Rate Figuring of Optical Surfaces

OMB2 Optical Fabrication and Testing (OF&T) 2000 View: PDF

Fabrication of a continuous parabolic surface relief array using a silicon-based wet-etch micromachining

OMB3 Optical Fabrication and Testing (OF&T) 2000 View: PDF

Mold material influence on precision molding process of optical glass

OMB4 Optical Fabrication and Testing (OF&T) 2000 View: PDF

Replication of low density electroformed normal incidence optics

OMB5 Optical Fabrication and Testing (OF&T) 2000 View: PDF

The fabrication of replicated optics for hard x-ray astronomy

OMB6 Optical Fabrication and Testing (OF&T) 2000 View: PDF

National Ignition Facility (NIF) program update

OMC1 Optical Fabrication and Testing (OF&T) 2000 View: PDF

Optical specifications - their role in the National Ignition Facility

OMC2 Optical Fabrication and Testing (OF&T) 2000 View: PDF

NIF Optical Component Wavefront Measurement Instrumentation and Initial Manufacturing Results

OMC3 Optical Fabrication and Testing (OF&T) 2000 View: PDF

Small optical components for the National Ignition Facility

OMC4 Optical Fabrication and Testing (OF&T) 2000 View: PDF

Configuration, Assembly and Test of the Chandra X-ray Telescope

OMD1 Optical Fabrication and Testing (OF&T) 2000 View: PDF

Multi-use Space Optics Test Facility

OMD2 Optical Fabrication and Testing (OF&T) 2000 View: PDF

MSFC research in lightweight x-ray mirrors for the Constellation-X mission

OMD3 Optical Fabrication and Testing (OF&T) 2000 View: PDF

Cryogenic Optical Testing at the Marshall Space Flight Center

OMD4 Optical Fabrication and Testing (OF&T) 2000 View: PDF

Metrology of optical beam expander for Space Readiness Coherent Lidar Experiment

OMD5 Optical Fabrication and Testing (OF&T) 2000 View: PDF

Using lap forces to predict glass removal during final polishing of large honeycomb telescope mirrors

OMD6 Optical Fabrication and Testing (OF&T) 2000 View: PDF

Chemical influence on the polishing process of optical glass

OTuA1 Optical Fabrication and Testing (OF&T) 2000 View: PDF

Visualization of Grit Interactions During Polishing

OTuA2 Optical Fabrication and Testing (OF&T) 2000 View: PDF

A mathematical model for machining spot in Fluid Jet Polishing

OTuA3 Optical Fabrication and Testing (OF&T) 2000 View: PDF

A novel low-cost technique of fabricating lens for plastic optical fibres

OTuA4 Optical Fabrication and Testing (OF&T) 2000 View: PDF

Cleaning of optics polished with colloidal formulations

OTuA5 Optical Fabrication and Testing (OF&T) 2000 View: PDF

Practical interferometric solutions for increasing test coverage for high precision optical manufacturing

OTuB1 Optical Fabrication and Testing (OF&T) 2000 View: PDF

Optical Reference Profilometry

OTuB2 Optical Fabrication and Testing (OF&T) 2000 View: PDF

Wavelength-tuned phase shifting interferometry applied to the measurement of transparent plates

OTuB3 Optical Fabrication and Testing (OF&T) 2000 View: PDF

Metrology of Localized Inhomogeneity in Optical Glass

OTuB4 Optical Fabrication and Testing (OF&T) 2000 View: PDF

Quantitative surface characterization using a Nomarski microscope

OTuB5 Optical Fabrication and Testing (OF&T) 2000 View: PDF

Phase-locked phase-shifting laser diode interferometry with a photothermal modulation

OTuB6 Optical Fabrication and Testing (OF&T) 2000 View: PDF

Fiber optic interferometric fringe projection phase-shifting 3-D profilometry using a frequency-modulated laser diode

OTuB7 Optical Fabrication and Testing (OF&T) 2000 View: PDF

Corrective surface aspherizing to optimize scan lens distortion

OTuC1 Optical Fabrication and Testing (OF&T) 2000 View: PDF

The Use of Implicitly Defined Aspheric Null Correctors for the Testing of Conformal Optical Elements

OTuC2 Optical Fabrication and Testing (OF&T) 2000 View: PDF

Sensitivity analysis of a CGH based interferometric setup for aspheric lens testing

OTuC3 Optical Fabrication and Testing (OF&T) 2000 View: PDF

Infrared Shack-Hartmann wavefront sensor for conformal dome metrology

OTuC4 Optical Fabrication and Testing (OF&T) 2000 View: PDF

Non-null testing of aspherical surfaces by using a Shack-Hartmann Sensor

OTuC5 Optical Fabrication and Testing (OF&T) 2000 View: PDF

Design of afocal components for optical metrology systems

OTuC6 Optical Fabrication and Testing (OF&T) 2000 View: PDF

Commercial production of glass aspheric surfaces

OTuD Optical Fabrication and Testing (OF&T) 2000 View: PDF

WAGNER: machine construction and operation considerations

OWA1 Optical Fabrication and Testing (OF&T) 2000 View: PDF

Vertical-axis diamond flycutting machine for producing flat half-meter scale optics

OWA2 Optical Fabrication and Testing (OF&T) 2000 View: PDF

Development of a Large Plano Optics Manufacturing Facility for the National Ignition Facility

OWA3 Optical Fabrication and Testing (OF&T) 2000 View: PDF

Quantitative roughness measurements with iTIRM

OWA4 Optical Fabrication and Testing (OF&T) 2000 View: PDF

The NIST X-ray optics CALIBration InteRferometer (XCALIBIR)

OWA5 Optical Fabrication and Testing (OF&T) 2000 View: PDF

Ion Beam Figuring and Ion Beam Polishing Production Tools - Processing Technology Included - for Customized Solutions

OWA6 Optical Fabrication and Testing (OF&T) 2000 View: PDF

Optical System for EUV Lithography

OWA7 Optical Fabrication and Testing (OF&T) 2000 View: PDF

Magnetorheological finishing: new fluids for new materials

OWB1 Optical Fabrication and Testing (OF&T) 2000 View: PDF

Nanohardness of abrasive particles used in magnetorheological finishing (MRF)

OWB2 Optical Fabrication and Testing (OF&T) 2000 View: PDF

Carbonyl Iron (CI) Solution stability and Aggregation Behavior Response to Electrochemical and Magnetic Stimuli

OWB3 Optical Fabrication and Testing (OF&T) 2000 View: PDF

Corrosion in aqueous cerium oxide magnetorheological fluids

OWB4 Optical Fabrication and Testing (OF&T) 2000 View: PDF

ROUGHNESS GAP BETWEEN ATOMIC SURFACES AND SUPER-POLISHED, SUPER-GROUND AND DIAMOND-TURNED SURFACES

PD1 Optical Fabrication and Testing (OF&T) 2000 View: PDF

High-accuracy reflectance mapping of microoptical components

PD2 Optical Fabrication and Testing (OF&T) 2000 View: PDF