Abstract

A fiber-optic sensor for the simultaneous measurement of strain and temperature is proposed and experimentally demonstrated based on Fabry–Pérot (FP) interference and the antiresonance (AR) mechanism. The sensor was implemented using a single-mode fiber (SMF)–hollow-core fiber–SMF structure. A temperature sensitivity of 21.11 pm/°C was achieved by tracing the troughs of the envelope caused by the AR mechanism, and a strain sensitivity of 2 pm/µε was achieved by detecting the fine fringes caused by the FP cavity. The results indicate that the dual-parameter sensor is stable and reliable.

© 2021 Chinese Laser Press

Simultaneous measurement of temperature and strain based on a hollow core Bragg fiber

Yu Wang, Yan Zhou, Xinyu Wang, Daru Chen, Zhenggang Lian, Chao Lu, and Hwa-Yaw Tam
Opt. Lett. 45(22) 6122-6125 (2020)

Towards the control of highly sensitive Fabry-Pérot strain sensor based on hollow-core ring photonic crystal fiber

Marta S. Ferreira, Jörg Bierlich, Jens Kobelke, Kay Schuster, José L. Santos, and Orlando Frazão
Opt. Express 20(20) 21946-21952 (2012)

Antiresonant mechanism based self-temperature-calibrated fiber optic Fabry–Perot gas pressure sensors

Hongchun Gao, Yi Jiang, Liuchao Zhang, Yang Cui, Yuan Jiang, Jingshan Jia, and Lan Jiang
Opt. Express 27(16) 22181-22189 (2019)

Hybrid structured fiber-optic Fabry–Perot interferometer for simultaneous measurement of strain and temperature

Ai Zhou, Boyang Qin, Zheng Zhu, Yaxun Zhang, Zhihai Liu, Jun Yang, and Libo Yuan
Opt. Lett. 39(18) 5267-5270 (2014)

Cascaded Fabry-Perot interferometer-regenerated fiber Bragg grating structure for temperature-strain measurement under extreme temperature conditions

Qin Tian, Guoguo Xin, Kok-Sing Lim, Yudong He, Ji Liu, Harith Ahmad, Xiaochong Liu, and Hangzhou Yang
Opt. Express 28(21) 30478-30488 (2020)