Abstract

We experimentally designed dispersion-managed repeaterless transmission systems with a pre-compensation and post-compensation technique using multi-channel-chirped fiber Bragg gratings. The repeaterless transmission link supports a single channel (1548.51 nm) with a 10 Gbps repeaterless transmission system over 300 km standard single-mode fiber (SSMF). In the system design, two distributed Raman amplifiers (DRAs) were used to improve the signal level propagated along the 300 km SSMF. The co-propagating DRA provided 15 dB on–off gain and the counter-propagating produced 32 dB on–off gain at the signal wavelength. The experiment results show that the post-compensation configuration achieves an optimal performance with a bit error rate at 1×10⁻⁹.

© 2018 Chinese Laser Press

Influence of EEPN and P2A noise with CD pre- and post-compensation in optical SSB transmission and Kramers-Kronig receiver system

Mingyue Zhu, Jing Zhang, Xiatao Huang, Xingwen Yi, Bo Xu, and Kun Qiu
Opt. Express 27(14) 19664-19674 (2019)

Real-time reception of 106 Gbps PAM-4 transmission over an 80 km SSMF link enabled by CD pre-compensation

Yanfu Yang, Qun Zhang, Siwei Qu, and Kangping Zhong
Opt. Express 29(15) 23517-23523 (2021)

Influence of cladding-mode coupling losses on the spectrum of a linearly chirped multi-channel fiber bragg grating

Hongpu Li, Yuusaka Nakamura, Kazuhiko Ogusu, Yunlong Sheng, and Joshua E. Rothenberg
Opt. Express 13(4) 1281-1290 (2005)

Fiber nonlinearity pre- and post-compensation for long-haul optical links using OFDM

Arthur James Lowery
Opt. Express 15(20) 12965-12970 (2007)

Optimization technology for DCF dispersion compensation based on cascaded fiber Bragg grating

Chong Wang, Mengting Zhou, Kun Song, Miaomiao Li, Yi Yi, and Jiahui Wu
Appl. Opt. 62(32) 8600-8605 (2023)