Expand this Topic clickable element to expand a topic
Skip to content
Optica Publishing Group
  • Chinese Optics Letters
  • Vol. 2,
  • Issue 6,
  • pp. 364-366
  • (2004)

Influence of deposition rate on the properties of ZrO2 thin films prepared in electron beam evaporation method

Not Accessible

Your library or personal account may give you access

Abstract

ZrO2 thin films were prepared in electron beam thermal evaporation method. And the deposition rate changed from 1.3 to6.3 nm/s in our study. X-ray diffractometer and spectrophotometer were employed to characterize the films. X-raydiffraction (XRD) spectra pattern shows that films structure changed from amorphous to polycrystalline with deposition rate increasing. The results indicate that internal stresses of the films are compressive in most case. Thin films deposited in our study are inhomogeneous, and the inhomogeneity is enhanced with the deposition rate increasing.

© 2005 Chinese Optics Letters

PDF Article
More Like This
Employing oxygen-plasma posttreatment to improve the laser-induced damage threshold of ZrO2 films prepared by the electron-beam evaporation method

Dongping Zhang, Jianda Shao, Dawei Zhang, Shuhai Fan, Tianya Tan, and Zhengxiu Fan
Opt. Lett. 29(24) 2870-2872 (2004)

Optical inhomogeneity and microstructure of ZrO2 thin films prepared by ion-assisted deposition

Hyun Ju Cho and Chang Kwon Hwangbo
Appl. Opt. 35(28) 5545-5552 (1996)

Stress control in optical thin films by sputtering and electron beam evaporation

Naoya Tajima, Hiroshi Murotani, Shigeharu Matsumoto, and Hiromitsu Honda
Appl. Opt. 56(4) C131-C135 (2017)

Cited By

You do not have subscription access to this journal. Cited by links are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access Optica Member Subscription

Select as filters


Select Topics Cancel
© Copyright 2024 | Optica Publishing Group. All Rights Reserved