Abstract

Considering spectrum tilt due to signal-to-signal Raman scattering (SSRS) in backward distributed fiber Raman amplifiers (B-DFRA), an inverse tilted on-off gain profile is adopted to achieve flat net gain. A simple approximate linear relationship of pump power at each wavelength versus on-off gain level and tilt was derived numerically and experimentally so that a novel control method was established. Since there are only 3 pre-determinable constants required for individual pump wave, it is easy to be realized. As an example, maximum errors less than 0.2 and 0.4 dB respectively for average gain and gain tilt were achieved over C+L band in 100-km back-pumped standard single-mode fiber (SMF) experimentally.

© 2005 Chinese Optics Letters

PDF Article

References

You do not have subscription access to this journal. Citation lists with outbound citation links are available to subscribers only. You may subscribe either as an OSA member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access OSA Member Subscription

Cited By

You do not have subscription access to this journal. Cited by links are available to subscribers only. You may subscribe either as an OSA member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access OSA Member Subscription