Abstract

A linear Boltzmann plot was constructed using Cu(I) lines of well-known atomic parameters. Aligning other spectral lines to the plot was adopted as a viable way to estimate the most probable values of Stark broadening parameters of Cu(I) lines at 330.79, 359.91, and 360.2 nm. Plasma was generated by focusing neodymium-doped yttrium aluminum garnet (Nd:YAG) laser radiation at wavelength 532 nm on a pure copper target in open air. Plasma emission was recorded at delay times of 3, 4, 5, 7, and 10 μs. The in situ optically thin H_α line was used to determine the plasma reference electron density over the entire experiment. Following this method, the missing values of the Stark broadening parameters of the three Cu(I) lines turn out to be about 0.15 ± 0.05 Å (for 330.79 nm transition) and 0.17 ± 0.05 Å (for 359.91 360.20 nm transition) at reference electron density of (1 ± 0.09) × 10¹⁷cm^–3 and temperature of 10 800 ± 630 K. The apparent variation in plasma parameters at different delay times was found to scale with electron density and temperature as ∼n_e.T_e^0.166.

© 2021 The Author(s)

Time-resolved diagnostic measurements of sub-atmospheric laser-induced air plasmas using the O_I 777 nm emission

Ashwin P. Rao, Noshin Nawar, and Christopher J. Annesley
Opt. Continuum 3(2) 187-199 (2024)

Combined Stark and Doppler Line Broadening

C. Frederick Hansen
J. Opt. Soc. Am. 54(10) 1198-1203 (1964)

Elemental analysis of sage (herb) using calibration-free laser-induced breakdown spectroscopy

J. Iqbal, H. Asghar, S. K. H. Shah, M. Naeem, S. A. Abbasi, and R. Ali
Appl. Opt. 59(16) 4927-4932 (2020)

Stark broadening of the cesium 5²D_5/2 → 10²F line shape

Timothy M. True, Christopher A. Rice, Greg A. Pitz, and Glen P. Perram
J. Opt. Soc. Am. B 40(12) 3015-3021 (2023)

Accurate determination of plasma temperature and electron density using a reference target: one-point calibration LIBS elemental analysis of alloy samples

Huiling Zeng, Runhua Li, and Yuqi Chen
Appl. Opt. 63(2) 338-344 (2024)