Abstract

An evaluation of several experimental aspects that can optimize electrochemical attenuated total reflection surface-enhanced infrared absorption spectroscopy (ATR-SEIRAS) performance using a commercially available, specular reflection accessory is provided. A comparison of different silicon single-bounce internal reflection elements (IREs) is made with emphasis on different face-angled crystal (FAC) options. Selection of optimal angle of incidence for maximizing signal and minimizing noise is shown to require consideration of the optical throughput of the accessory, reflection losses at the crystal surfaces, and polarization effects. The benefits of wire-grid polarizers and antireflective (AR) coatings on the IREs is discussed. High signal-to-noise ratios can be achieved by omitting polarizers, using an AR-coated FAC with a larger face angle, and working at angles of incidence close to the maximum throughput angle of the accessory.

© 2019 The Author(s)

Theoretical determination of parameters for optimum surface specificity in overlayer attenuated-total-reflection infrared spectroscopy

John S. Loring and Donald P. Land
Appl. Opt. 37(16) 3515-3526 (1998)

Thin-film absorption coefficients by attenuated-total-reflection spectroscopy

R. T. Holm and E. D. Palik
Appl. Opt. 17(3) 394-403 (1978)

Application of attenuated total reflection surface-plasmon-polariton Raman spectroscopy to gold and copper

Masayuki Futamata
Appl. Opt. 36(1) 364-375 (1997)

Simple Variable-Angle ATR Spectrophotometer Accessory

A. C. Gilby
Appl. Opt. 13(11) 2479-2480 (1974)

Attenuated total reflectance spectroscopy with chirped-pulse upconversion

Hideto Shirai, Constance Duchesne, Yuji Furutani, and Takao Fuji
Opt. Express 22(24) 29611-29616 (2014)