Abstract

A sensor was developed for simultaneous measurements of carbon monoxide (CO) and carbon dioxide (CO₂) fluctuations in internal combustion engine exhaust gases. This sensor utilizes low-cost and compact light-emitting diodes (LEDs) that emit in the 3–5 µm wavelength range. An affordable, fast response sensor that can measure these gases has a broad application that can lead to more efficient, fuel-flexible engines and regulation of harmful emissions. Light emission from LEDs is spectrally broader and more spatially divergent when compared to that of lasers, which presented many design challenges. Optical design studies addressed some of the non-ideal characteristics of the LED emissions. Measurements of CO and CO₂ were conducted using their fundamental absorption bands centered at 4.7 µm and 4.3 µm, respectively, while a 3.6 µm reference LED was used to account for scattering losses (due to soot, window deposits, etc.) common to the three measurement LEDs. Instrument validation and calibration was performed using a laboratory flow cell and bottled-gas mixtures. The sensor was able to detect CO₂ and CO concentration changes as small as 30 ppm and 400 ppm, respectively. Because of the many control and monitor species with infra-red absorption features, which can be measured using the strategy described, this work demonstrates proof of concept for a wider range of fast (250 Hz) and low-cost sensors for gas measurement and process monitoring.

© 2016 The Author(s)

Optical sensor based on an anti-resonant hollow-core fiber for simultaneous detection of methane, carbon monoxide, and nitrogen monoxide: proposal and simulation

Artur de Araujo Silva, Luis Alberto Mijam Barea, and Carlos Alberto De Francisco
J. Opt. Soc. Am. B 40(4) C21-C27 (2023)

Quantum cascade laser absorption sensor for carbon monoxide in high-pressure gases using wavelength modulation spectroscopy

R. M. Spearrin, C. S. Goldenstein, J. B. Jeffries, and R. K. Hanson
Appl. Opt. 53(9) 1938-1946 (2014)

Multispecies in situ monitoring of a static internal combustion engine by near-infrared diode laser sensors

Yvan Gérard, Robert J. Holdsworth, and Philip A. Martin
Appl. Opt. 46(19) 3937-3945 (2007)

Methodology for detection of carbon monoxide in hot, humid media by telecommunication distributed feedback laser-based tunable diode laser absorption spectrometry

Lemthong Lathdavong, Jie Shao, Pawel Kluczynski, Stefan Lundqvist, and Ove Axner
Appl. Opt. 50(17) 2531-2550 (2011)

Performance of a fire detector based on a compact laser spectroscopic carbon monoxide sensor

A. Hangauer, J. Chen, R. Strzoda, M. Fleischer, and M.-C. Amann
Opt. Express 22(11) 13680-13690 (2014)