Expand this Topic clickable element to expand a topic
Skip to content
Optica Publishing Group
  • Applied Spectroscopy
  • Vol. 66,
  • Issue 3,
  • pp. 324-333
  • (2012)

Quantum Cascade Laser-Based Measurement of Metal Alkylamide Density During Atomic Layer Deposition

Not Accessible

Your library or personal account may give you access

Abstract

<b>An in situ gas-phase diagnostic for the metal alkylamide compound tetrakis(ethylmethylamido) hafnium (TEMAH), Hf[N(C<sub>2</sub>H<sub>5</sub>)(CH<sub>3</sub>)]<sub>4</sub>, was demonstrated. This diagnostic is based on direct absorption measurement of TEMAH vapor using an external cavity quantum cascade laser emitting at 979 cm<sup>−1</sup>, coinciding with the most intense TEMAH absorption in the mid-infrared spectral region, and employing 50 kHz amplitude modulation with synchronous detection. Measurements were performed in a single-pass configuration in a research-grade atomic layer deposition (ALD) chamber. To examine the detection limit of this technique for use as a TEMAH delivery monitor, this technique was demonstrated in the absence of any other deposition reactants or products, and to examine the selectivity of this technique in the presence of deposition products that potentially interfere with detection of TEMAH vapor, it was demonstrated during ALD of hafnium oxide using TEMAH and water. This technique successfully detected TEMAH at molecular densities present during simulated industrial ALD conditions. During hafnium oxide ALD using TEMAH and water, absorbance from gas-phase reaction products did not interfere with TEMAH measurements while absorption by reaction products deposited on the optical windows did interfere, although interfering absorption by deposited reaction products corresponded to only ≍4% of the total derived TEMAH density. With short measurement times and appropriate signal averaging, estimated TEMAH minimum detectable densities as low as ≍2 × 10<sup>12</sup> molecules/cm<sup>3</sup> could be obtained. While this technique was demonstrated specifically for TEMAH delivery and hafnium oxide ALD using TEMAH and water, it should be readily applicable to other metal alkylamide compounds and associated metal oxide and nitride deposition chemistries, assuming similar metal alkylamide molar absorptivity and molecular density in the measurement chamber.</b>

PDF Article
More Like This
Optical coatings in microscale channels by atomic layer deposition

Nicholas T. Gabriel and Joseph J. Talghader
Appl. Opt. 49(8) 1242-1248 (2010)

Long period gratings coated with hafnium oxide by plasma-enhanced atomic layer deposition for refractive index measurements

Luis Melo, Geoff Burton, Philip Kubik, and Peter Wild
Opt. Express 24(7) 7654-7669 (2016)

Double-sided optical coating of strongly curved glass by atomic layer deposition

Ling-Shan Gao, Qing-Yuan Cai, Er-Tao Hu, Jing Zhou, Yao-Peng Li, Hai-Han Luo, Bao-Jian Liu, Yu-Xiang Zheng, and Ding-Quan Liu
Opt. Express 29(9) 13815-13828 (2021)

Cited By

You do not have subscription access to this journal. Cited by links are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access Optica Member Subscription

Select as filters


Select Topics Cancel
© Copyright 2024 | Optica Publishing Group. All rights reserved, including rights for text and data mining and training of artificial technologies or similar technologies.