Abstract

Mean-variance analysis is described as a method for characterization of the read-noise and gain of focal plane array (FPA) detectors, including charge-coupled devices (CCDs), charge-injection devices (CIDs), and complementary metal-oxide-semiconductor (CMOS) multiplexers (infrared arrays). Practical FPA detector characterization is outlined. The nondestructive readout capability available in some CIDs and FPA devices is discussed as a means for signal-to-noise ratio improvement. Derivations of the equations are fully presented to unify understanding of this method by the spectroscopic community.

Experimental implementations of 2D IR spectroscopy through a horizontal pulse shaper design and a focal plane array detector

Ayanjeet Ghosh, Arnaldo L. Serrano, Tracey A. Oudenhoven, Joshua S. Ostrander, Elliot C. Eklund, Alexander F. Blair, and Martin T. Zanni
Opt. Lett. 41(3) 524-527 (2016)

PdSi focal-plane array detectors for short-wave infrared Raman spectroscopy of biological tissue: a feasibility study

James F. Brennan, Mark E. Beattie, Yang Wang, Michael J. Cantella, Bor-Yeu Tsaur, Ramachandra R. Dasari, and Michael S. Feld
Appl. Opt. 35(28) 5736-5739 (1996)

Variance of focal-plane centroids

R. G. Frehlich
J. Opt. Soc. Am. A 7(11) 2119-2140 (1990)

Two-color thermal detector with thermal chopping for infrared focal-plane arrays

Vladimir N. Leonov and Donald P. Butler
Appl. Opt. 40(16) 2601-2610 (2001)

Shaped focal plane detectors for particle concentration and mean size observations

Y. C. Agrawal and Ole A. Mikkelsen
Opt. Express 17(25) 23066-23077 (2009)