Abstract

Laser-induced breakdown spectroscopy (LIBS) was used for the characterization of the main components of the surface residual dirt produced in cold-rolled steel plates as a consequence of the manufacturing stages. At laser fluences between 0.05 J/cm² < <i>F</i> < 0.30 J/cm², dirt ablation takes place without any contribution from the substrate. Results show that the main components of the dirt are fine particles of Fe mostly homogeneously distributed in a thin layer of grease and soaps. In the primary stages of the manufacturing process carbon residuals can also be found. By measuring light emission from the λ = 495.9 nm line of Fe(I) after laser ablation, we developed a real-time on-line method for the determination of the concentration of iron particles present in the surface dirt. The obtained results open new possibilities in the design of real-time instruments for industrial applications as a quality control of products and processes.

Rapid, automated measurement of layer thicknesses on steel coin blanks using laser-induced-breakdown spectroscopy depth profiling

George Asimellis, Aggelos Giannoudakos, and Michael Kompitsas
Appl. Opt. 46(6) 935-942 (2007)

Quantitative elemental analysis of steel using calibration-free laser-induced breakdown spectroscopy

M. L. Shah, A. K. Pulhani, G. P. Gupta, and B. M. Suri
Appl. Opt. 51(20) 4612-4621 (2012)

Determinations of trace boron in superalloys and steels using laser-induced breakdown spectroscopy assisted with laser-induced fluorescence

Changmao Li, Zhongqi Hao, Zhimin Zou, Ran Zhou, Jiaming Li, Lianbo Guo, Xiangyou Li, Yongfeng Lu, and Xiaoyan Zeng
Opt. Express 24(8) 7850-7857 (2016)

Detection of trace phosphorus in steel using laser-induced breakdown spectroscopy combined with laser-induced fluorescence

X. K. Shen, H. Wang, Z. Q. Xie, Y. Gao, H. Ling, and Y. F. Lu
Appl. Opt. 48(13) 2551-2558 (2009)

Carbon analysis of steel using compact spectrometer and passively Q-switched laser for laser-induced breakdown spectroscopy

Volker Sturm, Benjamin Erben, Rüdiger Fleige, and Witalij Wirz
Opt. Express 27(25) 36855-36863 (2019)