Abstract

A method is introduced for prediction of the true spectral absorbance at a given wavelength from an absorbance measurement that is affected by various deficiencies of the spectral measurement channel such as finite bandwidth, cross-over at unwanted wavelength, and signal bypassing the sample. These are unwanted effects that violate the validity of the Beer-Lambert law by introducing a nonlinear dependency between the concentration and the measured absorbance. The method is based on a simple physical model of the spectral measurement channel. It may be used even for applications where only one or a few spectral channels are used, e.g., for instruments based on optical filters. The method is applied to a wastewater NO_<i>x</i> sensor consisting of two filter-based spectral channels for absorption measurement in the UV region. Simulations show that dramatic improvement in the accuracy is obtained by introducing only one additional parameter for nonlinear correction as compared to the linear model. Calibration of the model is discussed.

Correct interpretation of spectral interference measurements of weakly absorbing films of micrometer thickness

R. Nitsche and T. Fritz
Opt. Lett. 29(9) 938-940 (2004)

Concentration measurements of a light absorber localized in a scattering medium

Yuichi Yamashita, Fumio Kawaguchi, Yoshitoshi Ito, Nobuaki Shinohara, Munetaka Haida, Shigeharu Takagi, and Yukito Shinohara
Appl. Opt. 33(31) 7541-7546 (1994)

Correction for nonlinear photon-counting effects in lidar systems

D. P. Donovan, J. A. Whiteway, and A. I. Carswell
Appl. Opt. 32(33) 6742-6753 (1993)

Measurement of Elasto-Optic Effect in Absorbing Materials by Ellipsometry*

L. G. Holcomb and N. M. Bashara
J. Opt. Soc. Am. 61(5) 608-615 (1971)

Corrections of size-of-source effect and distance effect in radiometric measurements of radiance

Juan Carlos Solorio-Leyva, José Guadalupe Suárez-Romero, José Germán Cortés-Reynoso, Juan Bautista Hurtado-Ramos, and Eduardo Tepichín-Rodríguez
Appl. Opt. 44(13) 2511-2518 (2005)