Abstract

Optical contact between an internal reflection element (IRE) and a sample is crucial for obtaining a good spectrum in an attenuated total reflection (ATR) experiment. When an air gap is present between the IRE and the sample, the spectrum severely deteriorates. Two techniques for determining the goodness of contact are proposed - first, by making a comparison between polarized ATR spectra and, second, by making a comparison between ATR and transmission spectra. When the optical contact is achieved, the normalized <i>p</i>-polarized ATR spectrum is exactly the same as the normalized <i>s</i>-polarized ATR spectrum. Moreover, the ratio between the normalized absorbance measured in the ATR mode and the normalized absorbance measured in the transmission mode equals the ratio between the frequency being considered and the normalization frequency. Theoretical and experimental investigations have been performed in order to verify the proposed techniques.

Recent applications of FT-IR spectroscopy to polymer systems

J. L. Koenig and M. K. Antoon
Appl. Opt. 17(9) 1374-1385 (1978)

Enhanced mid-infrared multi-bounce ATR spectroscopy for online detection of hydrogen peroxide using a supercontinuum laser

Christoph Gasser, Jakob Kilgus, Michael Harasek, Bernhard Lendl, and Markus Brandstetter
Opt. Express 26(9) 12169-12179 (2018)

Moldable optical element: a new tool to obtain the infrared attenuated-total-reflection spectrum of a rough surface

Alexandre M. Kondyrev and Alexandre E. Tshmel
Appl. Opt. 34(22) 4989-4992 (1995)

Quantitative ATR spectroscopy: some basic considerations

G. Müller, K. Abraham, and M. Schaldach
Appl. Opt. 20(7) 1182-1190 (1981)

Application of thin-film interference coatings in infrared reflection spectroscopy of organic samples in contact with thin metal films

Martina Reithmeier and Andreas Erbe
Appl. Opt. 50(9) C301-C308 (2011)