Abstract

A chemical method for separating diesel engine piston deposits into various organic and inorganic components is described. The components are subsequently analyzed by infrared spectroscopy. The method is illustrated with examples of deposits removed from the upper lands and upper ring grooves of pistons taken from heavy-duty diesel engine tests. Subtle chemical differences were observed between two deposits removed from upper lands of pistons taken from diesel engine tests which had been carried out with the use of lubricating oils with different formulations. More obvious differences were found between the deposits taken from the upper land areas and the upper ring grooves. These results indicate that a combined chemical and spectroscopic approach has the potential to provide detailed chemical information about engine deposits.

Quantitative analysis of the near-wall mixture formation process in a passenger car direct-injection Diesel engine by using linear Raman spectroscopy

Marco Taschek, Jan Egermann, Sabrina Schwarz, and Alfred Leipertz
Appl. Opt. 44(31) 6606-6615 (2005)

Simultaneous high-speed gas property measurements at the exhaust gas recirculation cooler exit and at the turbocharger inlet of a multicylinder diesel engine using diode-laser-absorption spectroscopy

Gurneesh S. Jatana, Mark Magee, David Fain, Sameer V. Naik, Gregory M. Shaver, and Robert P. Lucht
Appl. Opt. 54(5) 1220-1231 (2015)

Spectrographic Determination of Halogens and Sulfur in Engine Deposits

W. O. Mansfield, J. C. Fuhrmeister, and D. L. Fry
J. Opt. Soc. Am. 41(6) 412-416 (1951)

Fourier transform infrared spectroscopy of size-segregated aerosol deposits on foil substrates

Judith A. Hopey, Kirk A. Fuller, Venkataramanan Krishnaswamy, David Bowdle, and Michael J. Newchurch
Appl. Opt. 47(13) 2266-2274 (2008)

Infrared optical properties of diesel smoke plumes

Charles W. Bruce, S. B. Crow, Y. P. Yee, Bobby D. Hinds, D. Marlin, and A. V. Jelinek
Appl. Opt. 28(19) 4071-4076 (1989)